Windows-no disk error message?

Similar Questions

• "Windows - no disk" error message c0000013

  Original title: Error Message "Windows - No disk".

  I get an error message titled "Windows - no disk".

  The text says "Exception processing message c0000013 parameters 75b6bf7c 75b6bf7c 75b6bf7c" it gives me options to Cancel, try again or continue.

  The only way I can get rid of it is by clicking on continue exactly 17 times, it disappears, and then it reappears in about a minute.  Any ideas anyone?

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:
  http://support.Microsoft.com/kb/124873

• Windows hard disk error message

  I just got a strange error message that popped up while I was surfing around Facebook.  Before you do anything, I want to be sure that it is legitimate and not somebody trying to make me install a virus or something like that.  And if it is legitimate, I want to know what I would do to this topic.

  The error message says:

  "Windows has detected a hard disk problem.

  Back up your files immediately to prevent loss of information, and then ask the computer manufacturer to determine if you need to repair or replace the disk. »

  Then it gives me two options:

  "Start the backup process."

  "Ask me later".

  If the drive fails before the following caveat, you may lose all the programs and documents on the disk. »

  So, if I click on the button "Show invisible characters", he says:

  "For immediate action."

  Because a disk failure will make you lose all programs, files and documents on the disk, you should back up your important information immediately.  Try not to use your computer until you have repaired or replaced the hard drive.

  Which drive is a failure?

  The following hard disks are fault condition:

  Name of the disk: Seagate FreeAgent XTreme

  Volume: I:\ »

  I am running Windows Vista 64-bit and the hard drive in question is a disk Seagate external, as indicated by the error message.  Also I screenshotted the message box if this description was not good enough.

  Hello

  Disk problems can take seriously very quickly so I carefully check the disc now and do not forget
  to keep redundant backups of your important data (use several methods).

  Inside the Windows - Regular or Safe Mode (repeatedly press F8 as you start).

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  GOLD:

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ----------------------------------------------------

  For even better and more efficient to check:

  At the Recovery Console prompt (if you have one) or a Vista/Windows
  disc 7 - If you do not have a Vista/Windows 7 disk you can borrow a friend (it must be the same
  32 or 64 bits and they are not protected against copying) or make a. Also your system manufacturer will sell the
  physical disks cheap since you already own windows.

  Chkdsk /f /r

  RESET

  After k and before space / f and before.

  sfc/scannow

  RESET

  Space after c and before.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  ----------------------------------------------------------------

  Go to settings/settings F2 (BIOS/CMOS) often as you start so watch the screen as you start. Define the
  Start the command of CD/DVD disks of Windows (Vista or Windows 7 If you have installed.)
  Be sure to set in when.

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  =====================================

  If CheckDisk is unable to fill as above:

  (The old 302602 links isn't now valid for Diagnostics links).

  Manufacturer diagnostic utilities - run one to your hard drive
  http://www.techsupportforum.com/hardware-support/hard-drive-support/462298-no-IDE-device-found.html

  Corrected list dated 06/09/2010

  Fujitsu hard drives: utility of diagnosis here
  http://www.Fujitsu.com/EMEA/products/HDD/

  Hitachi hard drives: utility of diagnosis here
  http://www.HitachiGST.com/support/downloads/

  IBM hard drives: use Hitachi utility *.

  Toshiba hard drives: use Hitachi or Maxtor utilities

  Maxtor hard drives: Diagnostic Utilities here (now SeaGate)
  http://www.Seagate.com/www/en-us/support/

  Quantum hard drives: use the Maxtor utilities

  Seagate hard drives: here Diagnostic utilities
  http://www.Seagate.com/www/en-us/support/downloads

  Conner hard drives: use the Seagate utilities

  Hard drives Samsung: utility of diagnosis here
  http://www.Samsung.com/global/business/HDD/

  Hard drives Western Digital: utility of diagnosis here
  http://support.wdc.com/product/download.asp?lang=en
  Trial versions of one of these 'might' help.

  SpeedFan
  http://www.almico.com/sfdownload.php

  HD Tune
  http://www.hdtune.com/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Repeated message: Windows - No disk "Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c Exception", I have to reboot to remove and it returns. How can I fix it?

  I get this repeated error message: Windows - no disk "Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75b6bf7c Exception" I cancel and it returns immediately. I can't emove it unless I reboot.  And then he returned. How can I fix it?

  It's a shame that we don't know anything about your system, because that would of course make things easier.

  So I'll just take a stab at it and offer this idea in general use for this message:

  If you don't see a message like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set the value to 2

  (2 = off).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  http://support.Microsoft.com/kb/124873

• SMART hard disk error message

  I have a Pavilion dv4-2045dx and I got the "SMART hard disk error" message since last night after my daughter felt my cell phone and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do.

  Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Hello

  GeneiRene wrote:

  I got this error since last night after my daughter felt my laptop and I had a Crash report screen. Let him sit in the hope it to cool and start as expected. No luck...

  I already looked for several responses to the problem, but always returned empty-handed. I did the hard reset and I checked everything in the Diagnostices system only to control memory and battery by the way. I have not yet contacted HP about this. If I can fix it myself, I would rather to do. Anyone know of a way I can fix this WITHOUT having to buy a new hard drive?

  Thank you very much

  -GeneiRene

  Sorry to bring bad news, but... If you have a SMART hard disk error then the drive is toast. There is no way around that.

  The INTELLIGENT notification system gives you a report that the BIOS sees when it queries the hard disk during the Power On Self Test, he always does before the start in the Windows operating system.

  I hope that you have created a set of HP recovery cd. If you did, then you still have your operating system intact. If you do not, you can buy a replacement of HP recovery disk. They are inexpensive.

  Best regards

  ERICO

• I have NO SOUND on my computer and the Windows Media Player error message is C00D11BA.

  To try to solve the problem that I discovered in the Audio tab in sounds and Audio devices properties, there is No default unit in the area of audio playback and No default unit in the peripheral zone of MIDI playback.  In addition, the general tab in the properties of the device Audio USB says "this device is working properly" and that it is enabled as described in the use of the device box. The general tab of the device Audio USB also said the "Driver is enabled and working properly."

  I am able to record dictation through a program of Dragon NaturallySpeaking.

  I'm on Windows XP Pro with Service Pack 3, and before that I lost sound had not recently added that any hardware or software even though I may have uninstalled some rarely used program.

  Hello

  The usual cause of the error C00D11BA is when the sound card drivers are not installed or outdated.

  Windows Media Player cannot play the file because there is a problem with the audio device, such as a map his or her controller.

  Method 1:

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5230&ID=c00d11ba&ContextId=68&OriginalID=80040256

  Method 2:

  Diagnose and solve the problems of Windows audio playback automatically

  http://support.Microsoft.com/mats/AudioPlayback/

  You can also try the manual steps provided in the below mentioned link and check.

  How to troubleshoot sound problems in Windows XP

  http://support.Microsoft.com/kb/307918/en-GB

  Hope this helps and keep us posted.

• Cannot open the Windows Gallery with error message: "you may not have enough space on your hard drive or critical files may be lack of Windows.

  Original title: Windows Photo Gallery problems

  I have a problem trying to open Windows Photo Gallery, when I click on the program tab I get an error message saying: Photo Gallery cannot start. You can have enough space on your hard drive or critical files may be lack of Windows.

  • NO Mahesh B G , is not windows live photo gallery, windows photo gallery & is the message I get "could not open the Windows Gallery with error message: 'You may not have enough space on your hard drive or critical files may be lack of Windows'." Thank you Dave 07/11/2012

  Hi David,

  1. have you made changes on the computer before this problem?
  2. are you referring to the Windows Live Photo Gallery?

  Please follow the methods and mark the question below:

  Method 1:

  Fixed problems with Windows Live Photo Gallery that does not:
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Method 2:

  You need perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

  I hope this helps.

• Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet

  Windows vista sys. error message says need to adobe flash player 9.0 or later. I have this already. cannot run videos from internet

  Hello

  This can help you:

  Download and run the Flash Player Uninstaller, as Flash can get damaged.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• Not able to play the fieles audio using Windows Media Player - error: Windows Media Player Error Message C00D11B1

  Sometimes the Audio files are not played using Windows Media Player. Even if I'm not able to turn on/off the audio. Settings audio button is not working too.

  Error: Windows Media Player Error Message C00D11B1

  When I rebooted my dell Inspiron laptop, this problem does not occur, and I am able to hear the audio. Let me know the fix for this problem permanently.

  Hello

  If you're having trouble playing a song or video, it may be because of the codec problem. I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the Windows media player convenience store settings and check. Follow the steps to run the Troubleshooter:

  1. Press the Windows key + Q on your keyboard and type Troubleshooting and click Troubleshooting under results of research.
  2. Now, click on programs.
  3. Click the Windows media player settings to run the troubleshooter.
  4. Click on library of Windows media player to run the troubleshooter.

  Method 2:

  I suggest you to refer to the help article and check if it helps.

  Windows Media Player C00D11B1 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

  Unable to access Adobe Folio Builder using Indesign (CS6) on Windows 7, the error message is 'an error has occurred trying to connect to the Folio Builder Panel' [IMS_ERROR_FAILURE]

  Here is a list of the ports/areas to the whitelist to access the DPS Server problems

• After disk check if message corrupt Windows Installer and error messages happen

  I have an Acer travelmate 2480 laptop. Do a check disk to state the results that the windows installation system is damaged. ON commissioning there are a number of error messages stating that files cannot be deleted. Can I reinstall this program windows

  Hello

  1. What is the accurate and complete error message associated with windows install? This could help us by providing the best troubleshooting steps.

  2 are you able to install any other software?

  Method 1:

   

  Read the following article that may help you resolve this problem.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Method 2:

   

  Alternatively, you can try to install the latest version of windows install (Windows install 4.5) from the link and then search for the: question

   

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en 

• Windows DVD Maker error message unknown

  This is a frustrating problem I have with Windows DVD Maker that no one can seem to explain. I have a new computer, less than a month, running Windows 7. I tried to burn clips of film on DVD for various friends and family. I have finished 3 or 4 DVD with success. All of a sudden, during the burning process, I get to a point approximately 0.3 to 0.4 percent encoded when I get an error message that the DVD cannot be done due to an unspecified error. All that fresh, new, with the package of disk I'm trying to use ends up with the same message. The clips have not changed, filters have not changed, settings have not changed, I just did with some success without problem, now, all of a sudden, it cannot burn discs more. That's happened?  What should I do about it?

  Hello
   
  Follow these steps and check whether the problem is resolved.
   
  Method 1:
   
  Try to increase your capacity of RAm on your computer and check if it solves the problem.
   
  Method 2:
   
  You can follow this link forum below.
  http://social.answers.Microsoft.com/forums/en-us/w7music/thread/45baa19b-642a-43a8-A1B3-f8918f353192
   
  Method 3:
   
  This question (and others) can be caused by a video filter that might be using the file. To work around this problem, you can try to disable one or more video filters in Windows DVD Maker. For more information on the video and rotating filters or desactiver disable in Windows DVD Maker, see video filters in Windows DVD Maker: frequently asked questions.
   
  To enable the filters, off, or to restore the default list of filters:
   
  1. open Windows DVD Maker by clicking on the button start the picture of the Start button. In the search box, type DVD Maker and then in the list of results, click Windows DVD creation.
  2. in the turn your digital memories in a DVD page, click Choose photos and videos.
  3. on the Add pictures and video to the DVD page, click Options.
  4. click on the Compatibility tab.
  5. do one of the following:
  * To turn off a filter, clear the check box next to the filter name.
  * To enable a filter, select the check box next to the filter name.
  * To restore the default list, click on restore all default values.
   
  When you restore the default settings, the list and the filters settings are given to the last known good setting.
    
  6. click OK to close the DVD Options dialog box, and then continue to make your DVD.
   
  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions
   
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
   
  Hope the helps of information.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows backup / reader Error Message

  When I try to create an image of sytem, I get a Windows error message.  Legend of error: backup of the files.  The error section reads as follows:
  The reader \\?\Volume{4abe5988-c73f-11df-8bbd ... contains errors.  The error text is:

  Windows has detected corruption of file system on \\?\Volume{4abe5988-c73f-11df-8bbd-806e6f6e6963}. You should check the drive to the case before you can restore it.

  Check the drive for errors IGNORE OK

  By clicking on "Check the drive for errors" a new dialogue "Check Disk... "automatically opens with options to resolve the errors of system files and Scan for and attempt recovery of bad sections.  One or two control options and clicking Start Windows returns a new error: "Windows could not complete the disk check.

  To create this situation, I take the following steps:

  1. start > Control Panel

  2 backup and restore

  3. create the system image

  4. Select the backup location > OK

  5 backup C:\ (System) and RECOVERY (System) > next

  6. the error occurs.

  If I ignore error ther, the backup image is created, but because of this error, I'm not very confident that it will work if necessary :-(

  Background:

  1. I created a system image on 17/12/12 without problem (no error)
  2. I have all the windows of critics and other updates of software installed MS (Windows last updated 11/01/2013)

  3. I tried a restore point from before the windows update and it failed.

  4. my PC has been partially infected with "System of Progressive Protection" malware a 09/01/13.  I caught it starts to open the closure of the PC.  I ran MalwareBytes, Advanced System Care, MaAffee Security Center, Super Anti-Spyware, ChkDisk, sfc scannow and two applications separate from tune-up Dell PC with Global hard drive Diagnostics.  All indicate that the virus has been removed successfully, and that there is no error in drive on my PC.

  5. I find the Volumn number register (is not here).

  6. I did the recommended deletion of 'System of Progressive Protection' blogs McAffee and MalwareBytes.  Both indicate that the virus has been removed.

  7. I tried to create a new account administor and creation and the image with the same error.

  I don't know whether or not the error message I see is caused by the virus. However, I'm fairly certain, and is so my Dell rep of tech support, the "drive" appears in the error message does not exist.  Anyone know what else I can do to eliminate this error?

  Thank you.

  ,

  I came across a solution.  It seems that the problem is due to my ignorance.  Three years when a particuation my hard drive I have not assigned a drive letter to the "ROCOVERY' player intalled by the OEM.  {This "volumn" has ID: \\?\Volume{4abe5988-c73f-11df-8bbd-806e6f6e6963}.

  Somehow this volumn developed a file system error.  I used disk management to assign a drive letter to this volumn and then, I could check with ChkDsk.  He corrected the mistake and now I can make a system image without this error occurring.

  Thank you.