Error code 8024200d when installing update security Vista 2296011 KB
Several updates were issued on 12/10/10-we failed, 2296011 KB. 8024200d error code. I am running Vista Home Premium 32-bit.
Thank you.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
Error code 8024200d when installing SP2 for Vista Home Premium (32 bit)
I use Vista Home Premium (32 bit). When Windows Update recently
tried to install SP2 (several times), the quoted error message
repeatedly prevented installation. Google showed a number of similar
references to the problems associated with SP1 (from one year or if there are and less). Is
There is a work around for this message because it applies to SP2?Biggar Gordon
Houston, TexasHi Colonel biggs,
Welcome to the Forums Microsoft Vista
This problem may occur if one of the following conditions is true:
· A program on your computer interfered with the installation of the service pack.
· There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.
To resolve this problem, try each resolution in the 'General resolution"and the"Advanced Troubleshooting"section in the order in which they are presented. After trying a resolution, try to install the service pack again. If you can't always install the service pack, try the next resolution.
Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack
Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.
If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process
Solution 2: Run the system update readiness tool
System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:
1. click on Start
2. collapse this includes it in the Search box, type System, and then click System in the programs list.
The operating system is displayed as follows:
· For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
· For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.
After you determine which version of Windows Vista, your computer is running, download system update readiness tool.
Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack
- Close all applications and restart your computer.
- Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
- Right-click the icon of the third-party program.
- Click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
- As soon as you close the antivirus or the antispyware software, try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:
http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)
- After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.
For more information follow the link below:
http://support.Microsoft.com/kb/947366
Hope this information is useful.
Suresh G
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error code: 8024200d (cannot install updates)
Error code: 8024200d (cannot install updates)
Error 0x8024200D code is:
SUS_E_UH_NEEDANOTHERDOWNLOAD
The Setup program requires more data to downloadOption 1 - Download updates manually and install the same (you can find the same via number KB) -http://www.microsoft.com/downloads/en/default.aspx
or you can simply try.
Option 2 - How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058FYI - read - http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Error code 646 when installing updates KB2288953, KB2288621 and KB2291599
I get the error code 646 when installing updates KB2288953, KB2288621 and KB2291599. My Dungeon udates on default.
read the problems known in this page, they explain what to do. There is a link to a fix the article.
http://support.Microsoft.com/kb/2258121
Let us know if this helped.
-
error code 0x8007f0f4 when installing the security update KB2686509
I tried several times to update, rebooted the machine, nothing works.
... Windows failed to install the following update with error 0x8007f0f4: Security Update for Windows XP (KB2686509).
See the RESPONSE messages in this thread:
KB2686509 repeatedly fails with ErrorCode 0x8007F0F4
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115C-419D-AC37-03ff8927b79c[Last update - may 26, 2012, 21:42 UTC]
-
How can I fix error code 8024200d cant install update KB2378111
Windows Update keeps a failure during the download of update KB2378111, 8024200d error code. How can I fix?
what application anti-virus or security suite is installed and your current subscription?
What third-party firewall
What software anti-malware can be installed.
Make a manual visit of update of Windows with Internet Explorer.
[Start > Windows Update or IE open, click on tools, Windows Update]
When the installation failed, close IE.
Now, go to start > run > type in
%WINDIR%\WindowsUpdate.log
Click OK or press enter
Please see the lines of the last 50 or so WindowsUpdate.log
Download and install manually.
Windows Vista 32 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=95e24a63-d21a-4756-a16e-17a977595396
03/24 / 1111:09: 21 am
-
error code 641 when installing updates. also having problems with windows install
have vista Home premium, installed sp2. Could not find a way to reinstall the windows installer. I can't find what code641 is
Hello Spankyinc,
Thanks for posting on the Community Forums of Microsoft Vista.
I recommend to create a system manually, Restore Point so that in this case, a problem occurs when performing these steps, you can always perform a system restore.
Try to create a new user profile and try to install Windows update and check if the update works fine.
Create a new user
1. click on start, type Control userpasswords in the start search box, and then click Control userpasswords in the list programs.
2. click on manage another account.
If you are prompted for an administrator password or for confirmation, type the password, or click on allow.
3. click on create a new account.
4. in the new account name box, type a name of single-byte characters, click Administrator, and then click on create an account.
5. click on the user account that you created in step 4.
6. click on create a password.
7. in the new password box, type a password, retype the password in the area confirm the new password, type an indication of password in the Type a password hint box, and then click on create password.
Once you have a new user accounts check if you can install updates.
Access the link below for more information on how to solve the error message when you try to install Microsoft Update on a Windows Vista-based computer: "cannot install Microsoft Update on the computer.
http://support.Microsoft.com/kb/933528
If the steps above fail, access to the link below and run repair to reset the Windows Update components. It could help us solve the problem of Windows Update.
http://support.Microsoft.com/default.aspx/KB/971058Later, download the latest version of Windows install 4.5 on your desktop and try to install it. Install the new version of Windows install could help us solve the problem of the installer that you are facing.
Link to download Windows install 4.5:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enIt will be useful.
Thank you and best regards,
Srinivas
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-
Error Code: 670 when installing update of silverlight.
Original title: Error Code: 670
(Unable to install silverlight update) (can't take the old one out, no valid sequence were found for all the fixes.)
Hello
· You are able to install some other updates?
Step 1: Check out the below article that could help you.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesStep 2: You can also try to download and install the update from Microsoft Download center, using the update number of KB.
Reference: http://www.microsoft.com/downloads/en/default.aspxAlso you can post your question in the Silverlight forum for further assistance: http://forums.silverlight.net/forums/13.aspx
-
Error code 201 when installing update MUSE on Windows 7
I am running Windows 7 and the opening of MUSE, I am prompted to install an update. When I click on the installation, I get an error Code 201.
What is the reference for this?
Are you the same mistake again when you try to install the update again?
It is essentially a windows error that is related to the installation of the application, have install you any other application at the same time?
Please try again and if again, you get the error, contact support by live chat team.
Thank you
Sanjit
-
Update error code 0x8024a000 when installing updates.
WindowsUpdate_8024a000
0x8024a000
Here are the error codes I received during an attempt check updates. Initially, I received several requests for updates and the difficulty experienced in the installation successfully updates without receiving the error codes. Successfully, I stopped the BITs and the Windows Update and delete the files under the Software Distribution. I have restarted the computer at this time. After the restart, I had assured that the BITS and Windows Update When restarted, by default set to auto with delayed reboot.
When I tried to check the updates, I received the error codes listed above.
Can someone help me?
Thank you
MarioHi Mario,.
Your efforts to solve this problem is highly appreciated.
Are you facing this problem with all updates or a particular update?
The cause of this problem might be an interruption of the connection between your computer and the Windows Update.
I suggest you follow the steps in the Microsoft KB article and check if it solves the problem:
Windows Update error 0x8024a000
http://Windows.Microsoft.com/en-CA/Windows-8/Windows-Update-error-0x8024a000
You can also refer to:
Automatic update of Windows: frequently asked questions.
http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
I get an error 8024200d code when Windows installation 8.1 update for x 64 systems (KB2919355) based on ideas why?
I tried to install once or twice with the same error message.
Hi Randy,
Thanks for the reply with the status of the issue.
I would suggest trying the following methods and check if it works for you.
Method 1:
Try to install all the updates that are predefined in Windows Updates and also install the latest device drivers and check if that helps.
Method 2:
If the problem still persists, then create a new user account and then try to install the updates and check if the problem persists. This is to check if the problem is caused due to the corruption of the user profiles.
Create a user account:
http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8
Just reply to the State of the question so that we can help solve you this problem.
-
Get the error code 646 when installing updates.
Original title: 646
updates
Dr..,.
the KB includes an automated fix 50461 which corrects the problem, look here: http://support.microsoft.com/kb/2258121>
Let me know if this helped.
-
I have error code 8024200d when you try to update and install SP1 for Vista
I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.
Thank you! Matt
Matt,
The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
Update Manager did not install the update because it must be downloaded again.
Suggest you download and Save the complete stand-alone package of Vista SP1.Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)
Before attempting to apply the SP1 please consider this information-
If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.
Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
Move the downloaded Service Pack in the newly created folder.
Disconnect all the devices, printer, external USB hard drive, etc.Then, Configure the system starts in a clean condition
After you restart the worm as a clean boot, apply SP1.If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
Microsoft technical supportOr, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert
-
Error code: 80073712 when installing vista SP2 by using windows update.
Original title: Windows Update error code
I get an error code 80073712 when installing vista SP2 with windows update, how to fix this?
Hi Mike,.
You can try the steps in the following article and try to install the stand-alone package for Windows Vista SP2.
Error code 0 x 80073712 when you use Windows Update or Microsoft Update to install updates
For more information, you can also consult the following articles:
-
Error code 80070020 when installing KB968930 and update KB2463332.
I get the error code 80070020 when installing KB968930 and KB2463332. Install other updates. Automatic Fixer MS says this update should be fixed, says he has set when I run, but nothing changes. Vista Home premium 32-bit, service pack 2. Update does not work in safe mode.
WHMM
80070020 ERROR_SHARING_VIOLATION
These errors very strongly suggest that you see the effects of a hijackware infection.
Instead you send on what could turn out to be a proverbial 'wild goose chase', I would recommend that you contact the Security Support for the MS consumer on all this.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.
If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Or you can...
Start e-mail Windows Update support incident request
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527You can also start a support incident via the homepage of customer security: https://consumersecuritysupport.microsoft.com/
For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx
UTC/GMT is 20:44 Monday, May 21, 2012
Maybe you are looking for
-
I have an iphone 5 c running the latest update and a Mac Book Pro running 10.11.3 My phone syncs my photos directly on the photo 'app' on my laptop. I also save pictures on my cloud when I save. However, I'm running out of space on my phone and have
-
How to download my first application on a new iMac. currently have 3 other iMacs using the cloud to adobe. NOTE that I am connected to my account and attempt to download.
-
How can I disable typekit in illustrator?
-
Annoying bug/Glitch with scrolling effects
Parts of my home page to stick and faded beautifully to 0px/100% 200px/50% 600px/0%.I then made a slight update on the Version of the phone, and I noticed that a bug appeared somehow in my Desktop Version of the site.HomeIf you scroll in--> lowest ho
-
I can't license my product to Creative Suite cloud 6.
When I first downloaded Creative Suite cloud 6 of my University web store; I received a redemption of my University code to activate my subscription. I thought that it works when the creative cloud was able to download apps on my laptop like Photosh