Error Code BIOHD-1 pilot?

Similar Questions

• Error code: BIOHD-2

  * I forgot to put a check mark on the - mail me when someone answers - section *.

  Hello

  I'm helping a friend fix an error message received at startup - error: "echec failed boot drive, enter the system disk and press enter". Pressing F9: Diagnostics - results in all tests pass except the path of the boot: Error Code - BIOHD-2 WARNING: no drive detected.

  System:

  HP Pavilion Slimline mod. s3307c - Prod. # GZ727AA-ABA

  Windows Vista Edition Home Premium

  Seagate Barracuda 7200.10 - 320 GB HDD - P/N 9BJ13G-622

  I also have:

  -Checked to make sure there is no disc in the Atapi DVD Drive

  -Try another SATA - cable and double checked that all the cables are connected properly.

  -Call 800-HP-INVENT - they confirmed that he was no longer under warranty and directed me to their website - hp.com/go/support - am frustrated he then stumbled upon this Forum from HP Support.

  The option of Start Menu does not list even a HARD drive - it lists only the DVD player.

  F11: System Recovery - goes back to the same boot disc failure... screen

  The pc was purchased in 2008.

  How the hell did the average person knows how to solve this problem?

  Any help would be greatly appreciated.

  Maybe a problem with the drive CD/DVD like HERE there are several different drives / Firmware on the driver of the BIOS page here check to determine which drive you have. Or, if you have another computer with a disk that you can use temporarily to try to recover? Doesn't even have to be installed, I simply hooked up to a DVD player for cables and used.

• HP Pavilion a6530f ' error Code: BIOHD-4 Unitialized/corrompue start structure detected. "

  HP Pavilion a6530f

  does not start:

  Received error Code on following "The PC Doctor Diagnostics"

  "Error code: BIOHD-4 Unitialized/corrompue start structure detected."

  The statement was to: "contact HP support.

  How should I proceed? Thank you.

  Hello @Puntti69,.

  You are indicating your computer is also the message BIOHD-4, is that correct? I'll be happy to help you.

  If you replace your hard drive with a hard drive that is empty, you will also need the operating system disks available. It is rare to come across a store bought a hard drive with an operating system on it because all the software and drivers should be installed on the hard disk.

  Please answer as soon as possible.

  Thank you

• Error Code BIOHD-2 disk hard don't Test no drive detected

  I'm working on a HP Pavilion p6214y desktop PC.

  Just to list the specifications for any unusual problems:

  OS = Windows 7 Home Premium 64-bit

  MB = HP P/n: 513430-002 with AMD Athlon II x 4 620 Quad Core

  HD = Western Digital 1 TB

  Power = 350W LiteOn

  RAM = 8 G

  I get a blue screen that displays the 4 options and I chose F9 for diagnosis and he gave me a BIOHD-2 error code when checking the hard drive. He said that no hard drives have been detected. I read about it here and checked the bios and it does not find the hard drive. If most people say it's a bad hard drive. Although I put the drive in another computer and I can get the files from the hard drive and view them. It detects the drive in the bios. I also put a disc hard work of the other computer in this HP and it will not recognize a hard drive via the bios.  Given that the motherboard does not recognize HDD through sata ports I guess a mother board failure. I then put in a usb bootable Ubuntu 12.10 version. He turns round and will have access to the internet and everything. So, my little knowledge, means that the motherboard is still okay, right?  I don't think I read everywhere that the motherboard can go wrong only to sata ports. Anyone know if this is a possibility? Is there a chance that I could save the situation by buying a set of recovery disc for this model precise and just reinstall everything? I heard that they are usually $ 20, then it would be a good trial and error.

  In addition, it will allow recovery sometimes on the blue screen screen, but he won't do anything because the keyboard stops working at this time.

  Just another tech junkie.

  Hello:

  If you use ubuntu since the USB drive and not the hard drive, then Yes, there is a real possibility that the motherboard sata controller has failed.

  I think the motherboard of your model is notorious for failures of controller sata as evidenced in these numerous threads below.

  http://h30434.www3.HP.com/T5/forums/SearchPage/Tab/Message?Filter=labels%2Clocation&location=Category%3ADesktopPC&q=M2N78-la+.

• error code: 80070103 for pilot 61050SE WindowsUpdate_nVidia GE Force

  Original title: i need hep if anyone can help me I continually get an error - 80070103 for diver 61050SE WindowsUpdate_nVidia GE Force

  In my update of window it shows me this option for months, I even checked as suggested so I show no more, but the opion is back so I must need. Can someone give me the wihthis of suggeions, I'm going crazy with this thing. I receive nerve when I see an error. Other than this thing for target use... lol I'm no problem with playing games, my printer wants to print a sample page whenever it starts. But this diver will not update for love or money. I would be grateful any suggstions, even a *... lol, just kidding. . Thank you, wiped out in S.C. 1 more? I have windows Securiy Essentials in my PC and you just download Norton, causes a conflict and should I buy one? Thanks again and have a blessed day yall!

  Hello
  1. What is the brand and model of your printer?
  2. are you aware of any changes made to the computer, before the show?

  For the problem with Windows Update, I suggest you check out the following link.
  Windows Update error 80070103
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  In the issue links to the printer, print test pages when turned on, answer us with more information about the printer.

  I hope this helps.

• PC Doctor BIOHD-2 error code

  HP Pavilion FK484AV-ABA, model m4900t running windows 7 64 bit. The RAID-1 configuration.

  PC crashed. Cannot restart. Starting cold, received error message failure of RAID-1 and two hard drives. PC-Doctor ran and received the following diagnoses:

  Processor, memory, drives hard all OK.

  Diagnosis of startup path

  Error code: BIOHD-2

  ATTENTION: No disk is detected.

  Suggestion: Turn off the system and check the drive cables are attached firmly.

  Given that the PC-Doctor verified that both drives are OK, I'm assuming that the cables were also OK. Any suggestions on what may be the problem?

  Thanks in advance for your help.

  Go into the BIOS to see if the discs are recognized. Post your results here.

  This is an unusual condition for PC Doktor to report. Normally a BIOHD-2 error code means that a hard drive has failed, but I have no doubt that both drives failed at the same time.

• BioHD-8 error code a smart test failed on the drive

  I am running vista Home premium that came pre-installed (so I don't have a disc) on a hp pavilion slimline S3500f

  I had a problem when windows wouldn't load, just kept freezing and restarting a couple of times before it load.

  I was recommended to change my graphics card, which I did and windows starts to load and then arrested again.

  Then I got a blue screen Uni, when I ran a diagnostic test, I got an error code BioHD-8 a smart test failed on the drive

  I have Norton anti-virus installed on the pc

  I would really appreciate your help on this, thanks in advance

  Hello
  I would suggest to run Startup Repair and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Otherwise, I suggest you post the question in the hp forum and check if that helps:
  http://h30434.www3.HP.com/T5/desktop-hardware/BD-p/HardwareDPC

  It will be useful.

• BIOHD1 error code

  I have a HP P6631P with an AMD Athlon IIx4 635 processor operating system running Windows 7 home premium 64-bit, I've had the computer for 11 months, everything was great until yesterday. I pushed the power button and Windows tried to start but has frozen... I used the repair to restart the computer disk and after several hours, he brought to the top of the system recovery screen, still will not work constantly to take me to a help hp screen where I can't do anything, but the output. I ran a diagnostic and it gave me the error code BIOHD 1, so my question is... Now what? What should I do now?

  Hello

  I know what mean you, but at least it happened 1 month the right side of your warranty period

  All the best,

  DP - K

• BIOHD-8 error code

  I have a HP Elite, office e9270t model running 64-bit Windows.

  Read the mail, nothing new installed, computer stops responding.

  He can not get Windows to boot in any mode (std or repair).

  Fact Diag tools of marketing, all OK tests except by car.

  BIOHD-8 error code.

  I read a few posts saying that the disc is bad, some say a motherboard, some say that the driver update.

  Any help appreciated to get this unit up and running to back up my files on the desktop!

  Thank you, Marty

  FYI and this can help other institutions; I went to a technical support at Staples for options.

  They checked the unit possibility of recovering files to the user free of charge.

  The Tech pulled the side cover, something plugged in and all my files reappeared on his monitor.

  Make a complete copy of all the files is $69.99 (on their records or to your external drive, takes a few days).

  I opted for the copy of all the files and they will check the disk drive in the process.

  In the meantime, I'll check your video instructions that you so graciously provided.

  Thanks & many congratulations!, Marty

• BIOHD-7 error code

  After reading some of the forums on this error code, I think I'll have to buy a new hard drive. I was hoping that if I got the HP recovery kit I was able to fix mine. I also got a 0xef0003 error code. I tried to use the built in recovey but no luck. now all I have is a black screen that says no bootable disk. so I is a 2 part question.

  1. If I buy a new hard drive will it take the recovery kit HP offers? I have no disk backup.

  2 and I can up grade hard drive? say a 1 to maybe 2 with to make any other update to the computer?

  OS - Windows 7

  Model-300-1120

  Product - AY581AA-ABA

  BLD ID-A1NAV6PRA3

  Thank you for your help...

  Btheone, welcome to the forum.

  You are right that the hard drive has failed.  The maximum hard disk supported by Windows 7 is 2 GB.  Yes, you have the recovery disks provided by HP.

  Here's a guide for you help restore the system after replacing the hard drive.  Read it carefully before buying the new hard drive.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• Windows 7 - Pci to Pci bridge (error: Code 10)-PCI video card

  Before that I declare my problems I will list what I'm running and I am trying to accomplish.

  I'm under edition 64-bit of Windows 7 Enterprise, not the Beta or RC. I have 3 video cards in my possession (listed below).
  -(PCIe) Evga GTX260
  -(PCI) Evga 9400GT
  -Evga (PCI) Fx5500
  Out of these 3 cards I only use the GTX260 and the 9400GT. I had to "retire" the Fx5500 because drivers latest WHQL (certified) only provided support as far down as the cards of Nvidia "6 series". Unfortunately the Fx5500 is a 'series 5' and falls below this line. I already tried to use the GTX260 and Fx5500 in earlier versions of Windows (XP and Vista), but there is no way to download and install two separate drivers for two of the same video card do - you will have nothing else to errors. There is the option to go to a place like guru3d.com and download a supported driver custom which covers both the GTX260 Fx5500, but drivers are not certified and lack support. Therefore, I bought and now use the 9400GT is covered by pilots for the GTX260, which eliminates the need for messing around with custom drivers. Also, the 9400GT has a better graphics processor and more memory than the Fx5500, so it was time to upgrade anyway.

  Now that you have some info here is my problem, whenever I have install the 9400GT as I get a second entry "pci to pci bridge" (the other entrance has no errors) that appears under "System devices" in Device Manager. The entrance of bridge pci to pci second has a yellow triangle with an exclamation point, which refers to a problem. When you check the properties of this unit it is more or less said that Windows has detected a problem (error Code 10). The GTX260 is still working and still comes in "graphics cards" as a GTX260, but there is no entry for the 9400GT. I tried the 9400GT in two PCI ports and each time it does the same thing. If I get out the GTX260 and ONLY operate the 9400GT, I always get the question of the pci to pci bridge, BUT I get a picture and can boot into Windows 7 without a hitch. When I do that it is still nothing listed under "graphics cards" as a 9400GT or even a VGA compatible device.

  After messing around with this for 10 hours (Yes, I said 10 hours) I decided to dig my retirement (the Fx5500) PCI video card. When I installed this card I had no entry bridge PCI to pci 2nd appear under "System Devices", and one that appeared had no yellow triangle or error codes. I then checked under "Graphics cards" and Windows 7 it was recognized as a VGA-compatible device and asked for drivers.

  Now, I have concluded that there is absolutely no problem with the motherboard or my material (including video cards). In a first time EVGA support and I had suspected that the motherboard may be bad because of all the pre-diagnostic steps I had taken during my test of 10 hours. I won't enumerate what I did because it would literally take 3 hours to type everything in it. Just believe me when I say I've tried many things including but not limited to the latest bios updates (flashed 4 times and reset to ensure accuracy), IRQ customized management, all OS X 2, multiple/latest chipset drivers installed, reinstalling video multiple/last drivers installed, memtest test, complete equipment disassembly and re - build (adding a device at a time) and MUCH more. The only thing I have not tried installing another OS other than Windows 7 64 - bit to see if I could reproduce the problem. It's a waste of time, but because that let's say I install Windows XP Pro and the 9400GT doesn't have this problem... Well, that's fine, but who cares on XP Pro when I used it for the last 9 years and when I have a version full of Windows 7 I want to use? I'm certainly not running XP Pro on Windows 7 just to use the PCI video card. Second, if I install XP Pro and it always gives me the same error of bridge pci to pci and then, I only lost more time than because if it s not to go to work or the other OS, then I m sure that hell will not leave XP Pro installed when I use Windows 7.

  Thank you
  Piyush

  Maybe a stupid question now but has your post anything to do with Toshiba and Toshiba computers laptops?

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• Desktop H500s put in the disk hard windows 10 from another OPERATING SYSTEM PC - ERROR CODE 1962 - No.

  I tried to replace the current hard drive with the disc provided with windows 10 from another PC.

  I have is after having swapped the hard drive. The system cannot load Windows 10 and displays this message "ERROR CODE 1962 - No. OPERATING SYSTEM".

  The main reason I like to swap the drive is because it is a larger and faster disk and it come with Windows 10 Enterprise license. Instead of my current hard drive of Levono who only 8.1 Windows

  I understand that the pilot is maybe a problem. But, I should at least be able to see the Windows screen and I can fix it the driver, instead of the message "ERROR CODE 1962 - No. OPERATING SYSTEM"

  Note: I did I tried to put this disc in the CD player, I've found, it can read the disc. Therefore, should not be SATA non-compliance issue.

  Any suggestion?

  Hope to hear the suggestion

  Dear all

  I managed to fix in Boot "Disable UEFI and activate the legacy", my system is running. I just need to install the audio driver after the system is running

  Usefully it doesn't matter who will help to have the same problem

• CD-ROM not working not not on my satellite - error code 39

  Hello

  My CD-Rom is not working.
  Checked on the Panel, Manager of devices-
  It shows a yellow mark against it with the following message:

  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  I deleted and restart the computer, but the rest of the problem. I wonder where I could find the driver concerned, because I thought that Vista would have the pilot must be able to load automatically.

  Friendly advice would be greatly appreciated.
  Kind regards, Philippe

  Hello!

  The error code 39 is a very common question, but it can be solved very easily:
  In order to check the MS knowledge base:
  http://support.Microsoft.com/kb/314060/en-us

  Good bye