error code hp officejet pro 8600 346 trying to fax a document

Similar Questions

• OfficeJet Pro 8600 Plus does not fax

  He just did not react, even if the Test Fax is OK (all PASS). I did a lot of testing. Sometimes (well only once so far), it does not recognize a call (I call from a cell phone, but I know clients that it does not meet either ordinary fax machines) and connect. Sometimes, he gets the call, but ask me to accept it, although the auto answer is on. And most of the time, almost always, it does not react at all.

  It is a series of N911g Officejet Pro 8600. Brand new. It is connected to my PC (win7U) via USB, no configuration wireless fantasies at all. I tried to install manually and with the wizard, both directly on the printer to the computer. Everything fine each time, including a successful fax test all. But then no reaction. The line is a Fax line, with its own number, only for faxes. No problem to send faxes. I have tested the line on another printer (Epson PX830), with the same cable, just unplug the phone line on the Officejet and plug it into the Epson: no problem, all calls answered.

  Any ideas? Thank you!

  It works with the new NT. I was even able to programm with the fax: for lines analog, you will need to enter your analog number manually in the NT by using an analog phone (or perhaps a more intelligent device for the pros, I guess). I just send faxes empty a little with the codes as numbers. I got an error message from the phone network, but the new testament had already swallowed the codes from here here. I have not tried the cable: too happy it works finally.

• HP Officejet Pro 8600 Plus: sending of faxes directly Word document

  The machine works well for scan and fax a paper document manually.

  But I can't get it to send a Word directly from Word document.  "Fax - HP Officejet Pro 8600" is among my printers, but when I select the 'printer '...

  (1) on the 'Send Fax' screen, I wonder for all sorts of information (for example, contact). If I type in a name, etc., the information disappears - and appears later in my e-mail address book.  By clicking on the "Contacts Fax" area shows nothing.

  (2) even if I could find a touch, the screen insists that I have add a cover page (do not want one).

  (3) there is an icon called 'My Document Fax' which I assume would choose a document (for example. Word) to send - but nothing happens.

  'Add a Scan' will scan a document from the tray of the printer, but not what I need.

  CONFUSION...!

  Hello

  Have you tried to add a number manually?

  Enter the number in the top bar, and then press the Add button:

  

  Once you press the button Add the Send Fax option becomes available:
  

  The icon labled is the Word document who sent the fax indeed software

  Hope that helps,

  Shlomi

• HP Officejet Pro 8600 N911a: HP Officejet Pro 8600 N911a - Print when Fax is not saved

  Can I do so a fax is printed when it is not registered?

  I know that I can put to print and save every time, but I trust HP digital fax to save paper.

  If a fax is not registered, either because of a network error, or if the computer that logs usually in is cut off, can just fax be printed?

  @MrMeow, it's nice to meet you.

  I think I found something that can help your fax dilemma.

  This information has been in the User Guide for the Officejet Pro 8600 e-all-in-one - N911a; PG 69.

  Set up backup fax

  According to your needs best and security, you can configure the printer to store all faxes it receives, only faxes it receives while the printer is in an error condition, or none of the faxes it receives.

  The following fax backup modes are available:

  On >  The default setting. When backup fax is enabled, the printer stores all faxes received in memory. This allows you to reprint up to eight more recently printed faxes if they are always saved in the memory.

  NOTE: When the memory of the printer is low, it replaces faxes print, older because it receives new faxes. If the memory is full of unprinted faxes, printer stop to answer incoming fax calls.

  NOTE: If you receive a fax that is too large, as a very detailed color photo, it cannot be stored in memory due to limitations of memory.

  Error only > Causes the printer to store faxes in memory only if there is an error condition that prevents the printer to print the faxes (for example, if the printer is out of paper). The printer continues to store incoming faxes, as long as the memory is available. (If the memory is full, the printer stops responding to incoming fax calls). When the error condition is resolved, the faxes stored in memory automatically, print and then they are deleted from the memory.

  Off >  Faxes are never stored in memory. For example, you might want to disable fax backup for security reasons. If an error condition occurs which prevents the printer to print (for example, tracks paper printer), the printer stops responding to incoming fax calls.

  NOTE: If the backup fax is turned on and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might receive while the printer was in an error condition. You must contact the senders asking them to return the unprinted faxes. To get a list of faxes that you have received, print the Fax log. The Fax journal is not removed when the printer is off.

  To set backup fax from the printer control panel

  1 tap (right arrow) and select Setup.

  2. press Fax Setup, and then click Advanced fax setup.

  3. press on the backup Fax reception.

  4. press on , error, or out of service.

  Reprint of faxes received from memory

  If you set backup fax mode to On, received faxes are stored in memory, whether the printer has an error condition or not.

  NOTE: After that the memory is full, the oldest faxes, prints are replaced as new faxes are received. If all stored faxes are not printed, the printer does not receive fax calls until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security.

  According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

  To reprint the faxes in memory from the printer control panel

  1. make sure you have loaded paper in the main tray.

  2 tap (right arrow) and select Setup.

  3. touch Tools , or Faxand then select reprint faxes in memory. The faxes are printed in reverse order, where they were received with the most recently received fax printed first, and so on.

  4. If you want to stop reprinting the faxes in memory, press the Cancel button.

  Please let me know if these steps solved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• HP Officejet Pro 8600 N911a: can not save scanned documents

  button to scan save the docs is grayed out after the scan is finished and ready to save the step

  Hi @orthoman,

  Thank you for joining the HP Forums!

  I understand that you cannot save documents scanned with your HP Officejet Pro 8600 N911a printer. I'm happy to help you!

  Please take a look at this guide, the printer Scan fails or impossible to scan allow (macOS Sierra).

  Do not forget to return to this topic and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Hope this guide helps!

• HP Officejet Pro 8600 All in one – elbows / folds document

  I have a HP Officejet Pro 8600 all in one. I've used it for almost a year and recently when I print on plain paper my doc over dating a turn on paper. The elbow is always in the same place, 2 1/2 "from the top of the page. The crumpled section is about 1/2 "in length. Impression of quality and all the rest is good.

  I printed a few pamphlets with this printer using heavy paper for brochure of gasoline that does not bend like my regular stock. Any ideas.

  I have the same problem, but just behind the box!
  IT IS SHAMEFUL! The printer is practically unusable!

  Sometimes it shredded paper!

  The printer driver is also very basic, compared to Canon for example.
  On top of that, it does not save the changes to your settings,
  We have to bury in the HP software!

  Also, the printer is unable to make a copy without border.

  And last but not least the printing quality is very poor.
  my printer Canon does better printed with generic ink...

  It is also large and noisy.

  I completely regret my purchase.
  I can't even sell it now as it's deffective.

• OfficeJet Pro 8600, Windows 7, any type of document with an image prints very slowly

  OfficeJet Pro 8600 Premium.  Windows 7 32 bit, any type of document with an image prints very slowly including .doc. Docx, pdf. Even when printing in draft mode.  Other documents are very well

  Take a look at this link.

• HP Officejet Pro 8600: Attempt at analysis of the documents through the group via wifi printer

  Nice day

  I have a laptop Dell Inspiron 17 with installed Windows 8.1.  I use the printer above via the computer of my husband with a homegroup and wifi.   I have no problem with the printer it prints from my laptop, but I can't scan a document through my laptop, and I ask my husband to do it each time through his computer.  When I tried to install the printer directly to my laptop with the HP disc that came with the printer that tells me my computer need to be updated for this purpose.

  I don't know how to upgrade my laptop to accept this facility, or preferably a way to browse the homegroup and wifi. Anyone can solve this problem for me please?

  Hello X-23,

  Thank you very much for your kind and detailed instructions, sorry for the delay in responding but due to storms we have been without internet for a while.  I copied your instructions, but as we are about to leave for vacation and being an amateur, I need time to try, but you will no doubt know the result when I succeed.

  Kind regards

  Meg6

• HP Officejet Pro 8600 Plus - Duplex printing problem

  I use a printer Officejet Pro 8600 Plus (what is the best printer I've ever had, apart from this problem!).  I use it with Windows 8.1.

  He struggles for more than a few pages print using duplex.  The problem seems to get worse when I print a pdf file.  It starts to print very well and made a few pages, but then I get this message "error on HP Officejet Pro 8600.  "Could not print * name * folder.  It appears on the computer not the printer.

  Any suggestions?

  Thank you

  Hey there @operationorphan

  I just wanted to add my own suggestions here for the issue of two-sided printing that you had with your Officejet 8600.

  You can try to update the firmware: get the latest Firmware and updates

  If this does not help, try to uninstall the printer software , reboot the PC and reinstall the printer. This should dissipate all software problems.

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  See you soon

• OfficeJet PRO 8600 digital Fax

  My Officejet PRO 8600 will receive my faxes but not store them digitally plus. A PDF file is displayed in my incoming fax folder named output.pdf with 0 KB in size and does not open. Made for about 8 months to a maximum of 2 days. I have Windows 8. Help?

  Hello @StarrCann,

  Welcome to the HP Forums!

  I understand that your digital faxes do not open on your computer using the Officejet 8600. I will do my best to help you! I suggest the setting up of the digital fax on your computer again. I'll give you a document from HP on Setting Up Digital fax HP to save received faxes on your computer.

  You must delete the old folder digital fax your computer first, before proceeding with this document. Please post your results, I will be looking forward to hear from your part, have a great day!

• HP Officejet Pro 8600 scans appear in white

  Hello

  My HP Officejet Pro 8600 scan correctly, either from the document feeder or the dish. The scans appear almost totally blank, although some weak contours are barely visible along the top. Two computers use the scanner (Mac OS X 10.6.8 and 10.7.5) and both have the same problem. Any suggestion would be great!

  Hi ABverr,

  A hard reset can solve this problem.  To do this, unplug the power cord at the back of the printer when the printer is still on.  Unplug the other end of the power cord.  After 60 seconds, plug it directly into a wall outlet, and then plug it into the back of the printer.  Try a scan.

  If this does not help, I linked a document with measures to correct the problems of quality of scanning.  Click here

  If the problems persist, you can download and run printing HP and doctor Scan.  Click here  Let me know the results.

  Good luck!

• Page numbers and date stamp for Officejet Pro 8600 more

  Just installed Officejet Pro 8600 Plus.  When I print documents, I need to print WITHOUT the page numbers in the header (ie: page 1 of 4) and the date at the bottom.  I lived all the parameters that I find and cannot find this option.  Help, please!

  Hello

  You can remove the default header, footer... using AMPe configuration. This example so for Firefox on the tab "margins & header/footer":

  

  You simply give all areas "in white".

  Update: Very similar to Internet Explorer.

  Kind regards.

• OfficeJet PRO 8600: Exhausted color cartridges

  I work at home and use the Officejet PRO 8600 to make black copies of documents that I print on my HP laserjet printer or other documents only. In very rare occasions, I'll print of the officejet.

  I put the oficejet to print in black only. However, after a period of time (6 monthe or almost) the printer will specify that the color cartrides are exhausted and I need to order an other muti-pack.

  Why the color cartridges must be used upwards if I do not use color cartridges? In any case to avoid?

  Thank you

  Jim K

  There is little ink used in black and all colors at startup and when printing to prevent clogging of the nozzles.

  The document described here how the ink is used.

  There are a few considerations to minimize the ink used during the interview:

  • Always keep the printer plugged in to an outlet.  If an external switch (e.g. a switch power socket) is used the printer will use more ink start.
  • Do not run cleaning cycles of the façade or the Toolbox of the computer, they are rarely necessary and use in any color and black ink.

• HP Officejet Pro 8600 received Plus (fax, e-mail) faxes landscape but should be portrait.

  Does anyone know how to change the settings for the HP Officejet Pro 8600 so that received faxes in the direction in which they were sent with?  I Fax to Email function and adjustment when PDFs you in my Inbox, the documents must be oriented in Portrait, but they are stretched horizontally, vertical press and the PDF page orientation is landscape.  The original faxes were sent as Portrait.

  This makes it almost unreadable faxes.

  Any help is greatly appreciated.

  Hello

  Fax to PC is designed to record the incoming faxes as .tiff file format. You can see this information on Page 72 to Guide users on the link below.

  http://h10032.www1.HP.com/CTG/manual/c03026243.PDF

• OfficeJet Pro 8600 Plus: officejet pro 8600 fax network

  Hello

  Thank you I have HP officejet PRo 8600 more that has fax functionality and it is connected on the LAN (192.168.100.3).

  I need another application fax FAX talk (my laptop) to send any documents to HP officejet PRo 8600 by lAN for the fax on the actual fax modem so is HP officejet PRO.

  is this possible?

  What is the right configuration to be written in application FAX TALK? This is the IP fax, FAX port, login (username / password)?
  BR
  Ahmad

  Hi @amalla,

  Under Windows, the HP drivers are not considered a TAPI modem.

  Thank you.