HP Officejet Pro 8600 received Plus (fax, e-mail) faxes landscape but should be portrait.

Similar Questions

• HP Officejet Pro 8600: Receiving fax nobody's just get lines

  He works very well, but today when I sent a fax, they received what it takes in lines (such as a bar code).  I have tried a different fax number and they have had the same problem.

  Hi @Jazoola

  These lines appear when you copy or scan too? You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  In addition, please click the appropriate link below to make sure that the printer has the latest firmware update. This update of the firmware can improve the performance of the printer and fix various defects.

  HP Officejet Pro 8600 N911g_n Firmware (more models and premium)

  HP Officejet Pro 8600 N911a Firmware (8600 e - all-in - One Printer)

  I hope this helps.

• OfficeJet Pro 8600 can send faxes but not receive them?

  I recently purchased the Officejet Pro 8600 and fax send function works fine, but there will be no more. Any thoughts why?

  Hi Sheckaman,

  Follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02891758

• HP Officejet Pro 8600: Recently a fax pops up when I try to print photos and the picture does not print

  We have a printer all-in-one HP Officejet Pro 8600 operating from a desktop HP with Windows 7. Recently, in the last two weeks my wife told me, we cannot print photos. The documents appear to be printed without a problem, but when trying to print a photo we get a window titled 'Send Fax - HP Officejet Pro 8600'. We have never used or even hung fax capablitly since we have owned this printer (maybe 2-3 years). All of a sudden, this window is displayed when we try to print a photo and the photo does not print.  I can't tell you that my wife did not hit accidentally a wrong button somewhere down the line, but she says she does not. I tried to attach a screenshot of the window, but for some reason that it does not take it. It's probably something very simple, but technically challenged myself, I can't understand. Help, please.

  Thank you

  Vince Pellerito

  Print picture of what program?  Some programs to keep their own default values for the printer.  It seems that the default printer for the printing of the photo program has been set to Fax.  Try to open the program, select the Officejet Pro 8600 as the printer rather than the Officejet Pro 8600 fax.

• HP Officejet Pro 8600 e Plus: HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g and instant ink

  Morning

  Does anyone know if the HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911g is compatible with the instant the ink program?

  Thank you

  Stuart

  @StuartTunstall

  Welcome to the HP Community Forum - we are a community of fans of HP !

  It seems that your printer is not eligible.

  Connected - HP Instant ink > FAQ > my printer is eligible for the moment ink HP?

  I also checked the datasheet for your printer and did not find any indication of instant support of ink.

  Time for a new printer HP brilliant?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP OfficeJet Pro 8600 icon opens the screen on the desktop but does not scan option

  HP Officejet Pro - N911a e-all-in-one printer
  Serial number:
  {Removed privacy}
  Product number: CM749A

  When I opened icon HP OfficeJet Pro 8600 I see no lopnger options to select scan or fax from the computer monitor screen and HP printer assistance does not open.  How can I fix it?

  My solution was to delete and reload the software.  I downloaded the software from the HP support site and installed on my hard drive.  It worked.

• Re: HP officejet pro 8600 N911n, scan to E-mail: server failure.

  Have had this printer for a couple of years and scan to send an email worked perfectly with Gmail accounts until a few weeks before, then just stopped.

  I tried multiple e-mail accounts with their appropriate smtp servers inculding gmail, yahoo, outlook and 2 areas of private messaging. I confirmed that smtp servers and settings I have for each of the accounts is correct by settign accounts to send email thunderbird and all send with smtp servers, so this is definitely a problem for which something has changed with the printer as it used to work great. The printer is currently running firmware CKP5CN1545AR that she claims is ongoing.

  Please indicate how to solve this problem I used for scanning to e-mail several times a week

  Thank you

  Keith

  Hello @kkron, hope you are well!
  
  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems when using e-mail scanning function. I would like to help.
  We will first try to assign a manual DNS server that seems to do the trick, most of the time. Follow the steps below:

  • First of all, make sure that the printer firmware is up-to-date. If you are unsure, go to http://hp.care/2e12HCp and install the firmware.
  • Get the IP address of the printer, you can touch the 'Wireless' icon on the Control Panel printer to get the IP address.
  • Type the IP address in your web browser to get the EWS page on your computer printer.
  • Go to the 'Network' tab - click on "wireless (802.11), and then click «network address (IPv4)»»
  • Click on the box that says "Manual IP", then click "Propose an IP address manually" to give an IP address manually to your printer.
  • Click on the radio button that says 'Manual of the DNS server' and under manual type favorite 8.8.8.8 and manual replacement enter 8.8.4.4 (it is Google's DNS server address)

  Now try to scan to e-mail / web services. If the problem persists, please go through http://hp.care/2e0ZCCy and make sure that all settings are correct. If necessary, try to create a new account by following the instructions.

  Let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet Pro 8600 Plus: Officejet Pro 8600 Plus 'Sweep of Pin code function' Windows 10?

  In Win7 that I could click on start/programs go to HP, click on and he would drag with various categories which was Scan. I could then pin the shortcut to scan on my desktop or start.

  However, falls with Win10 you click on all the Apps/HP Officejet Pro 8600 most and there is nothing to see but pin all of the module that is already on the desk of the installation.

  How can I get just the pinned shortcut to scan?

  I tried directly open scan with the .exe only two that had the word scan in the programs but the scan did not open.

  Mark

  Hi @markg2,

  Thank you for showing your interest in the HP's Support Forums!

  I see that you want to create a shortcut to the HP scanning. I will definitely do my best to help you and don't forget to come back to this thread and mark "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating this is for you. Windows 10 has made some changes, so that the steps are slightly different from Windows 7.

  Please follow these steps as a guideline:

  1. First of all, we need to locate HP Scan where on the computer. The default location is in Program Files. For example, C:\Program Files (X 86) \HP or Hewlett-Packard.
  2. Go to (C:\Program Files (X 86) \HP or Hewlett Packard HP Officejet Pro 8600 Plus\Bin)
  3. Right-click on HP Scan, and then click send to.
  4. Left click on desktop (create shortcut) to place the shortcut on the desktop.

  For more information, see this paper:
  Create the shortcut on the desktop in Windows 10 for a program (announced)?

  I hope this information is useful. Please reply to this message with the results. Good luck!

• HP Officejet Pro 8600 cannot receive faxes

  HP Officejet Pro 8600

  ================

  Cannot receive faxes.

  Able to send faxes.

  Have a line telephone/answering system equipment, with 4 lights.

  I send a fax to the 1-888-473-2963.

  A few minutes later my phone/answering machine equipment has started ringing 4 times, asking to leave a message.

  Then I heard the ringtone that a fax has been available and I checked the printer display. I had an option:

  "receive faxes manually.

  I pushed this option and the incoming fax was printed.

  If this case should be closed.

• OfficeJet Pro 8600 Plus does not fax

  He just did not react, even if the Test Fax is OK (all PASS). I did a lot of testing. Sometimes (well only once so far), it does not recognize a call (I call from a cell phone, but I know clients that it does not meet either ordinary fax machines) and connect. Sometimes, he gets the call, but ask me to accept it, although the auto answer is on. And most of the time, almost always, it does not react at all.

  It is a series of N911g Officejet Pro 8600. Brand new. It is connected to my PC (win7U) via USB, no configuration wireless fantasies at all. I tried to install manually and with the wizard, both directly on the printer to the computer. Everything fine each time, including a successful fax test all. But then no reaction. The line is a Fax line, with its own number, only for faxes. No problem to send faxes. I have tested the line on another printer (Epson PX830), with the same cable, just unplug the phone line on the Officejet and plug it into the Epson: no problem, all calls answered.

  Any ideas? Thank you!

  It works with the new NT. I was even able to programm with the fax: for lines analog, you will need to enter your analog number manually in the NT by using an analog phone (or perhaps a more intelligent device for the pros, I guess). I just send faxes empty a little with the codes as numbers. I got an error message from the phone network, but the new testament had already swallowed the codes from here here. I have not tried the cable: too happy it works finally.

• HP Officejet Pro 8600 Plus: sending of faxes directly Word document

  The machine works well for scan and fax a paper document manually.

  But I can't get it to send a Word directly from Word document.  "Fax - HP Officejet Pro 8600" is among my printers, but when I select the 'printer '...

  (1) on the 'Send Fax' screen, I wonder for all sorts of information (for example, contact). If I type in a name, etc., the information disappears - and appears later in my e-mail address book.  By clicking on the "Contacts Fax" area shows nothing.

  (2) even if I could find a touch, the screen insists that I have add a cover page (do not want one).

  (3) there is an icon called 'My Document Fax' which I assume would choose a document (for example. Word) to send - but nothing happens.

  'Add a Scan' will scan a document from the tray of the printer, but not what I need.

  CONFUSION...!

  Hello

  Have you tried to add a number manually?

  Enter the number in the top bar, and then press the Add button:

  

  Once you press the button Add the Send Fax option becomes available:
  

  The icon labled is the Word document who sent the fax indeed software

  Hope that helps,

  Shlomi

• HP Officejet Pro 8600 Plus: Scanner/Fax, printing of two black lines on documents

  When you use the document for scan, copy, fax feeder, etc. the document always ends with two vertical black lines in the middle of the page.  I read a few other posts similar to this and tried all the advice, and nothing seems to have worked.  So far I've tried: cleaning the machine reset, turn it off for a period of time and again, disconnect it from the power supply for five minutes and by him plugging plug (which were the advice given in other posts).  Thanks in advance!

  Hi @JHurkett.

  Welcome to the Forums of HP's Support. I understand that you found lines in the scans and faxes of the ADF. I would like to help.

  If please examine this message and try the steps that you have not already done so. HP Officejet Pro 8600 e-all-in-one and Photosmart 7520 e - all-in - One Printer Series - band vertical, lines, or streaks in the Copies, faxes, or scans

  If you have any questions, or if this does not resolve the problem, let me know.
  If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

• OfficeJet Pro 8600 Plus: officejet pro 8600 fax network

  Hello

  Thank you I have HP officejet PRo 8600 more that has fax functionality and it is connected on the LAN (192.168.100.3).

  I need another application fax FAX talk (my laptop) to send any documents to HP officejet PRo 8600 by lAN for the fax on the actual fax modem so is HP officejet PRO.

  is this possible?

  What is the right configuration to be written in application FAX TALK? This is the IP fax, FAX port, login (username / password)?
  BR
  Ahmad

  Hi @amalla,

  Under Windows, the HP drivers are not considered a TAPI modem.

  Thank you.

• OfficeJet PRO 8600 digital Fax

  My Officejet PRO 8600 will receive my faxes but not store them digitally plus. A PDF file is displayed in my incoming fax folder named output.pdf with 0 KB in size and does not open. Made for about 8 months to a maximum of 2 days. I have Windows 8. Help?

  Hello @StarrCann,

  Welcome to the HP Forums!

  I understand that your digital faxes do not open on your computer using the Officejet 8600. I will do my best to help you! I suggest the setting up of the digital fax on your computer again. I'll give you a document from HP on Setting Up Digital fax HP to save received faxes on your computer.

  You must delete the old folder digital fax your computer first, before proceeding with this document. Please post your results, I will be looking forward to hear from your part, have a great day!

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.