Everyone regrets the upgrade? I'm considering it.

Similar Questions

• Considering the upgrade to PS Elements to full blown CS 4

  Hello

  I'm a Web designer who is currently using Photoshop Elements. I didn't print the drawing, and I don't usually create graphics from scratch (I have an asscoaite that makes my work, when I need customstuff). What I do is purchase graphic StockXpert, then apply effects, filters, etc in PS Elements, if necessary, and then reisze, harvest, etc..

  I am considering the upgrade to full 4 CS because of the offer of upgrade from $299 for all owners of items. I donwloaded the trial version and there are so many new things, I don't know where to start.

  Based on the information that I gave to my work, what other features in CS 4 would probably use in my daily work? I know everyone must make their own decisions, but I try just caliber if the characteristics justifying the upgrade for me.

  Thanks a lot for any advice or advice you can give.

  Michael

  Michael,

  Unless it has been added in the PSE 8, single layer masks would be worth the $. There is also the potential for greater automation of repetitive tasks, beyond what can be easily done in PSE.

  You will have a little problem with the transition. With the price of the LARGE offer of upgrade, I would add a copy of Adobe Classroom in a Book for Photoshop CS4, just to give you a quick "the lay of the land" and get the updated terms in your mind, show what are the new "powers". Only, you will need probably to find locations and then getting your feet wet. There are a lot of very valuable resources, but you know already much of it - you just need to know where it will be in PS, and will help the ICVA with who.

  If I do not already have two licenses for PS, I run out, buying PSE 8 and take advantage of the upgrade in a blink of an eye. I forgot the exact cost, but I think I paid a lot more than that, with an upgrade competitive of Aldus PhotoStyler 2.5 PS and has been for decades. My recommendation - do it!

  Good luck

  Hunt

• Considering the upgrade to Fusion Version 3.1.3 (416484), OS x 10.6.8.  Advice?

  I bought a MacBook Air in 2011, with the latest version of the Fusion.  I installed Windows 7 Ultimate and have never had any problems with it.  Lately, some new apps do not work on the BONE, so I am considering the upgrade to Yosemite or El Capitan.  I am concerned to make my system unstable, and some of the things I read on the blogs on El Capitan and Version 8.0 do not increase my confidence.

  I OS X 10.6.8 and Fusion 3.1.3.  The MacBook Air is the Intel Core Duo 2.13 GhZ processor and 4 GB of RAM.  Can anyone give me some advice regarding the stability of the various upgrades of version for the OS and the merger?  In addition, there are issues related to upgrading the version of merge with Windows 7?  TIA

  You need to upgrade the host operating system - Apple to not support 10.6.8 more, so you are exposed on the net.

  The biggest challenge that you have is that all the new OS versions (i.e. support) really want 8 GB in the machine for a solid performance, so unfortunately, it is a simple minimum configuration for a modern machine.  but because of security issues, an upgrade is always a good idea. You might as well go to 10.11 - the system requirements are the same as 10.9 and 10.10, and there a lot of stability and security bugs.   To make it work OK with 4 GB on that CPU, you'll want to close all other applications before you start merging and stop melting when you use do not.

  Here is the order of the steps, I suggest you:

  (1) make a full clone of the system to an external drive.  Time Machine is not enough, both because on this corruption operating systems silent vintage can slip, and Time Machine is not reliable for the backup of virtual machines at all.  I recommend Carbon Copy Cloner, of www.bombich.com.  Mike is a great guy, and that the software has saved my bacon many countless times.

  (2) stop - no suspend - all your virtual machines.  Delete snapshots, you might (I'm not sure if had Fusion 3 snapshots, but if she did, removed at 100%).

  IMPORTANT: If you use the former FileVault 1 (which is what came with 10.6.8), you MUST disable it before upgrading.  Check system preferences/security/filevault.  If it was turned on, make another clone after deactivation.

  3) upgrade your host operating system.  That will turn off a lot of your software (including Fusion), as incompatible.

  (4) upgrade of all other software including Fusion to the current version.

  (5) start the virtual computer and upgrade the virtual hardware and VMWare tools when you are prompted.

  (6) make sure that the virtual machine has only 1 GB of RAM and 1 core assigned to it if you can.

• Since the upgrade to El Captain downloader of adobe bridge photo no longer recognizes my camera picture or cards. The computer is just not adobe bridge? Everyone this experience or know a work around?

  Since the upgrade to El Captain downloader of adobe bridge photo no longer recognizes my camera picture or cards. The computer is just not adobe bridge? Everyone this experience or know a work around?

  See the documentation for more information. Photoshop Elements and bridge use the same Photo Downloader: organizing elements does not recognize some devices | Mac OS 10.11.x

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• Considering the upgrade to Win7

  Since the upgrade to Win7 for my new computer, I bought in Italy, which has Windows Vista installed with Italian language settings. Is there an option during the upgrade to get the English version of Win7?

  Hello

  You cannot change your language in Home Premium. It is only possible in Ultimate and Enterprise.

  MUIs are exclusive to Ultimate and can be found via the option Update updates Windows.

  Run Upgrade Advisor before you begin the installation.

  Good luck!

• G42 - 490 YOU: what changes can I see or wait until after the upgrade of RAM?

  Hello

  My PC model # is G42-490TU, processor - Intel Core (TM) i3 CPU M370,
  RAM: 6.00 GB (2.93 usable), System Type: 32-bit operating system.

  I've recently upgraded RAM 2.00 GB to 6,00 GB with 2.93 GB usable, that's what it shows.

  I want to know if this 2.93 GB of 6,00 GB usable the correct value of the memory that is made available?

  Also, I want to know what changes can I see or wait after upgrading the RAM from 2.00 to 6.00 GB where 2.93 GB is usable? How does this improve the effectiveness of my PC? Is there something that needs to be done on my own apart from adding the RAM to increase performance and the maintenance of my PC?

  Thank you best regards &,.

  Isha

  The problem is the operating system of your laptop is 32-bit.

  A 32-bit operating system can use @ 3.25 GB installed memory.

  Install additional 4 GB to a laptop that had 2 GB was a regrettable mistake.

  As long as the 4 GB memory module you have is compatible, you'd better remove the 2 GB module and put the 4 GB module in its place.

  You won't find a lot of improvement with the current configuration of a 2 GB module and a 4 GB module. With this memory configuration does not work in dual channel mode.  You would be better with two modules of 4 GB, but this is only if you upgrade your operating system to a 64-bit version.

  In fact, you would have improved if your OS is 64-bit. A 64-bit Windows operating system will recognize and use the installed memory.

  If you really want to improve the performance of the laptop, you should consider upgrading to a SATA SSD 256 GB drive at least.

• Welcome to the upgrade to ESXi 4.0 to 4.1 and 4.6 of view

  
  Hello everyone, I have a question regarding the upgrade of my esxi hosts that are running a cluster View 4.6.

  Overview of my environment:

  The current 4 ESXi hosts run 4.0.0 261974.  These hosts are UCS B200 M2 blade.

  I need to add a 5th host for abilities and bought a new UCS B200 M3 blade.  The M3 blade only supports ESXi 4.1 U2 or more so I can't install the same version running on my 4 current hosts.

  My question is, what would be the best practice to get the blade M3 installed and in my environment?

  Should I install the 4.1 u2 on the M3 blade and attach it to the cluster with the 4 hosts running 4.0, and then you spend the remaining 4.0 hosts one at a time?

  or

  Can I upgrade the 4 hosts first run 4.0 to 4.1 u2 or u3 and then install and join the M3 host?

  In addition, please include any documentation useful update, or links to, that would be great!

  Thank you!

  You consider right. Do an upgrade at a time. 4.0 and 4.1 also can coexist without problem, but the ideal is to upgrade.

  http://www.VMware.com/PDF/vSphere4/R41/vsp_41_upgrade_guide.PDF

  Good luck with that.

• How can I buy an iPhone AT & T using the upgrade program and replace it with T-mobile?

  I intend to buy the iPhone, which will be released this morning, and I heard that the next iPhone will run out quickly, the configuration I wanted, as 6s and 6 s iPhone more runs so quickly, but this time, I want to start from the beginning because I don't want to miss a day of work, or otherwise I won't get it that $5000 per day , so if I don't have a number to AT & T, what do I do because I am on T-mobile, and I can't go to the Apple Store Friday on time to conduct a review of YouTube and get views and re-read soon on my site. I am currently on AT & T, but I heard that the iPhone is going to be better with the upgrade program, and I wanted to sign up. So, why do you need an AT & T number, and why should I go to the Apple Store if I want a T-mobile and last year, I had to wait until October 9 to get my 2nd iPhone 6 s more of Apple and a back of pre-orders unlocked without AppleCare.

  Nothing is still announced by Apple, but wait like everyone else.

• Windows 7 upgrade advisor, Vista, says that Firefox must be uninstalled before the upgrade and that I won't be able to reinstall it, is it true?

  I'm currently running Vista, 32-bit. I am considering upgrading to Windows 7. I ran the report Upgrade Advisor and he said "Mozilla Firefox 20.0.1 must be uninstalled before the upgrade to Windows 7. You will be able to reinstall it after upgrading to Windows 7. "This seems inaccurate info, based on the Firefox site, but I want to check what I have to do before you start the upgrade. Leave Firefox installed and in place when I update or uninstall and reinstall then after the upgrade?

  Hello herplaw, you're right, this doesn't look good - firefox will work fine on windows 7. I leave it installed and to proceed with the update. in any case (if you need to reinstall it later), you can also save personal information that is stored in your firefox profile before continuing: back up and restore the information contained in the profiles of Firefox

• After the upgrade to the new version of firefox 13.01 I can't play video on youtube and other sites what should I do?

  After the upgrade to the latest version 13.0.1

  I can't open videos from youtube and other sites

  I tried all the solutions, but none works

  I would also consider the following. Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.

  To resolve this problem, follow the steps in these articles in the Knowledge Base:

  Flash Plugin - maintain and troubleshoot

  Adobe Flash plugin has crashed - avoid that it happen

  11.3 Flash does not load video in Firefox

  We'll find other information on more technical issues under these links:

  http://forums.Adobe.com/thread/1018071?TSTART=0

  http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html

  Please tell us if it helped!

• Why can't the upgrade procedure be re-scheduled to warn users BEFORE they upgrade they will lose the additional features they have relied on for years? This isn't a trivial matter - read the other "complaints"!

  For the second time in my experience, an update of Firefox led to a lost feature where the modules are considered incompatible. It is UNACCEPTABLE that the user is not warned prior to this loss. It is immaterial that the Add-ons are third parties: If Firefox can 'discover' the problem AFTER the upgrade, it can warn us BEFORE the upgrade. I love Firefox, but you've already lost one of my sons as a user because of what it sees as a casual disregard for the personal choices of the users. Give us the ability to customize Firefox. Fantastic! Can paralyse us when we innocently do a upgrade. How much more of your user base that you want to lose?

  As a user of long date of Firefox (and Netscape), I tend to agree with you that some type of compatibility check must be done before the real Firefox takes place version upgrade. I never install a new version of Firefox on my previous version. I admit that I'm a more experienced user and generally start to use new versions of Firefox during the beta test period and install the beta version, with a separate profile required, to test the new product and test the compatibility of the add-on. I know that's not possible or convenient for all users.

  The following extension can save you some frustration.

  • It adds an option "Empty list" on the screen Add on
  • It will show compatible Mozilla products and versions for each Extension.
    • I do not believe that the Extensions installed from other sites that the site Mozilla Add - ons are included; you will need to check the site from which you downloaded the Extension or with the developer of the Extension for the updating of the plans for the new version of Firefox.
  • I installed it and I use it as a first step before contacting the developers Extension and or visit their home/forums pages looking for beta versions of their Extensions for new versions of Firefox.
  • This will help you if you do not allow automatic updates of Firefox; most versions of news (e.g., Firefox 3.x of Firefox 4). See:
    • https://support.Mozilla.com/en-us/KB/options%20Window%20-%20Advanced%20panel#w_update-tab

  Extension list Dumper: https://addons.mozilla.org/en-US/firefox/addon/extension-list-dumper/

• Solution for Webcam sleep & back problems after the upgrade to Windows 7

  Just thought I'd share the solution I recently found a problem I've had since a Satellite Pro A200 GE 26 Q of the upgrade from Vista to Windows 7.

  I installed the software webcam for windows 7 on the toshiba site and built-in Chicony camera would work very well after a reboot, but if the computer is in sleep for a long enough period, the unit would stay asleep when the computer woke up and wouldn't work at all, unless the computer has fully restarted.

  The solution lies in a change in the registry to force the computer to update the webcam USB controller is attached, after the release of sleep. It was apparently the default for Vista when it was released, but was changed in Vista SP1 and Windows 7. Designed for Vista original material which did not have its drivers/registry updated entries could therefore be subject to a failure because of changes to the default settings through the updates of windows. Toshiba, it seems, do not think that this issue then of the extinction of the registry fix for Win7 upgrades for the satellite Pro A200. Therefore fix manually.

  The article where the solution is here: [http://support.microsoft.com/kb/928631]

  You do NOT have the file of the fix, you must only make the change to the registry described later.

  You need turn on the camera while you do the following to make sure that it appears in Device Manager correctly.

  Step 1: Determine the specific USB host controller

  
  # Click on * early *, enter devmgmt.msc #the * search * box, then click on * devmgmt.msc* in the * list of programs.
  # The * view * menu, click on * devices of * connection *.
  # Expand the processor node. For example, expand * ACPI * Multiprocessor PC *. (In my case, * ACPI x 86 based PC) *.
  # Extend * system compatible ACPI Microsoft *.
  # Extend * PCI Bus *. Several USB host controllers will be listed.
  # Expand each USB host controller node, and then expand successive subnodes until you find the name of the device that is failing. For example, the device entry might look like the following: ACPI Multiprocessor PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB Universal Host Controller - drive root Hub\fingerprint 2830\USB * (Note: for me, I found the webcam to ACPI x 86 PC\Microsoft ACPI-Compliant System\PCI Bus\Intel (R) \ICH8 family USB2 Enhanced Host Controller - 283A\USB Root Hub + USB Composite Device\Chicony USB 2.0 Camera-based) *.
  # When you have located the device, right click on the associated and then USB host controller click on * properties *. In the example that is listed in step 6 you would right-click * Intel(r) ICH8 Family USB Universal Host Controller-* 2830, then click on * properties *. (* Again, for me it was different - ICH8 Family USB2 Enhanced Host Controller - 283 a *).
  # Click on the * details * tab.
  # Select * pilot key * in the list. The driver key will look like the following. Note the last four digits of this driver key. {36fc9e60-c465-11cf-8056-444553540000} \0002 * (on my system it's: (36fc9e60-c465-11cf-8056-444553540000) \0005*).
  
  
  

  Step 2: Add the ForceHCResetOnResume registry value for the USB host controller

  
  # Click on * early *, type regedit #in the * search * box, then click on * regedit.exe* in the * list of programs.
  # Find and then click the registry subkeys that are similar to the following: * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class{36FC9E60-C465-11CF-8056-444553540000}\Four-digit_number.* in this step, the numero_a_quatre_chiffres is a placeholder for the USB devices in the system.
  # You must search the registry subkey by using the value that you noted in step 9 above. For example, if the key of the pilot to step 9 is * {36fc9e60-c465-11cf-8056-444553540000} \0002*, then you need to get * HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Class {36FC9E60-C465-11CF-8056-444553540000} \0002. (For me, as mentioned above, this was \0005 (36fc9e60-c465-11cf-8056-444553540000)). *
  # On the * Edit * menu, point on * New * and then click on * DWORD value *.
  # Type# * ForceHCResetOnResume * to the name of the DWORD and then press ENTER.
  # Right click * ForceHCResetOnResume * and then click on * edit *.
  # In the * boite box the value data, type# 1 and then click on * OK *.
  # Exit the registry editor.
  # Restart the computer.

  This fixed the problem for a long time for me. I'm writing this in case it helps someone else who has the same problem. If anyone from Toshiba never reads this, you might consider adding the registry fixes for upgrades of windows 7 on the download page for this & all other models affected.

  Big Hey what s announced and detailed, thank you! :)
  I m wondering how you discovered it.

  But I want to add something: before you make or change something in the Windows registry, make a backup of it. In the worst cases, restore you the old Windows registry. Just to be sure ;)

• Since the upgrade to El Capitan, Mail frequently continues to move emails at random in the trash. How can I stop this? emails

  After the upgrade, I started noticing that the emails were disappearing from my Inbox. I finally discovered them in the trash. As I clean the junk and Trash regularly, I've lost a few emails before I realized what was going on - very frustrating! I now control Trash before deletion which is an unnecessary pain in the you know what! Everyone knows this problem and what we can do about it?

  At the same time, I noticed that when I compose an email, it appears charges sent mail in time. What is going on? Help.  Peter

  From the Mail menu bar, you select

  ▹ mail preferences... ▹ Accounts ▹ behaviors of the ball

  and uncheck the box marked

  Store drafts on the server

• Should I unplug external drives during the upgrade?

  Contemplating upgrading to El Capitan.  I have an iMac end of 2014, so I know that it is correct.  My question is - should I disconnect all external drives and devices before you run the upgrade, or it doesn't matter?

  
  

  I remember too, when I updated before, the new operating system does recognize the Time Machine backups.  Should I do to be able to access the TM of the previous operating system?

  Thank you

  Barbara
  

  It can't hurt to unplug external drives.

  Time Machine should recognize the previous backups. Which means, you should be able to go back to the backups made since previous versions of OS X. I know when I upgraded from 10.10.5 to 10.11.3, I could see/restore back ups in 10.10.5.

  Another thing to consider is once the Installer OS X El Capitan.app file is downloaded and before you click continue to install, copy this file from / applications to another folder (for example, downloads) so that you have it if you need it in the future. Download time records.