Error connecting to Node Manager?

Similar Questions

• Stop a server managed using WLST and Node Manager

  Hello

  I use Node Manager (NM) to start my managed servers. After connecting to the Server Admin, I run the command:

  Start ('myserver1', 'Server')

  I check the log file and the console and the managed server shows no error, either it RUNS. The tail of the log file says "SOA platform is running accept queries"

  I'm now trying to write a script to stop for the same managed servers. I connect to the Node Manager via wlst, connect to the Admin Server successfully and deliver:

  Shutdown ('myserver', 'Server')

  Here is the error I see in the managed server log file:

  [JCABindingManager]: this operation is not supported for JCA base MDB.

  The managed server then passes State SUSPENDED.

  I have renamed the data files, cache and tmp, restarted the server and once again tried to arrest him, but the same thing happened.

  Any suggestion is appreciated.

  Thank you

  Andy

  What happens if you add strength = "true" as an additional parameter for your

  stop command?

• Node Manager warning - need help

  Once after the Node manager stopped and started, I get the warning in the nodemanager.log file below.

  < 26 March 2015 05:01:45 > < WARNING > < error e/s all by closing the socket connection >

  java.nio.channels.ClosedChannelException

  Below the details I have read from the console

  Status:	Inactive
  Description of the problem:	javax.net.ssl.SSLHandshakeException

  error below I get when I try to start the server from the console, run

  To the server Server1, the Node Manager associated with oam_server1 of the machine is not accessible.

  All selected servers are currently in a State that is not compatible with this operation or are not associated with a Node Manager running or you are not authorized to perform the requested action. No action will be taken

  After WLS 8.1.x Weblogic Nodemanager doesnot require a CustomTrust.

  However, even if you specify the customTrust parameter in nodemanger.properties should not cause problems. It ignores only them.

  Make sure that the following settings are added to ndoemanager.properties:

  CustomIdentityAlias = xx

  CustomIdentityKeyStoreFileName = identity.jks

  CustomIdentityKeyStorePassPhrase = xxx

  CustomIdentityKeyStoreType = JKS

  CustomIdentityPrivateKeyPassPhrase = xxx

  Keystore = CustomIdentityAndCustomTrust

  Make sure that the CN of the certificate that you use is the same as the address to listen specified in the nodemanager.properties file, if it is not, and then add the following indicator d as an option java script startNodemanager:

  -Dweblogic.nodemanager.sslHostNameVerificationEnabled = false

  If you use SHA2 certificates, so make sure you add the following parameter as a java (enable JSSE) option in the startNodemanager script:

  -Dweblogic.security.SSL.enableJSSE = true

  In addition,

  Connect to the console-> machinery-> nodemanager-> Listenaddress (specify address of listening that you mentioned in the nodemanager.properties file)

  The certificate root of nodemanager must be imported in the Admin Server Trust keystore.

  If you use the same keystore in ndoemanager and the administrator of the server, and then you skip the previous step.

  -Emile Laurent

• Could not start the server via the SOA node Manager

  Hi all
  
  I try to install AIA 11.1.1.6.0 on top of the SOA Suite 11.1.1.6.0.
  
  I was able to install the weblogic, UCR, soa and osb servers server correctly. Now, before installing the AIA, the document I am following it says, make sure to start the server soa through the Manager of nodes.
  
  Now I start to the administrator of the server, then the node Manager, to make sure I checked the node Manager is in place, I logged the weblogic console, went to the Machines, and I see that it's upward and accessible.
  
  Now using WLST commands, first of all, I have connected to Manager nodes by using the nmConnect() command, so I try to start the server soa through node Manager with the command start ('soa_server1').
  
  I get an error when you try to start the server with the command nmStart() soa, below is the error message...
  
  «Error at startup server soa_server1: weblogic.nodemanager.NMException: Exception when starting Server «soa_server1»»
  
  I ran the command dumpStack(), and I get the output as 'no trace available battery.
  
  If I am able to start the server soa through the node Manager, I can go ahead and install the pack of AIA, but wrong to let me go forward.
  
  I also tried to boot the server from soa through the weblogic console, go to the servers tab, select the soa_server1 and start, the State of the soa server will "FAILED_NOT_RESTARTABLE".
  
  I followed some of those blogs like...
  
  http://Neeraj-SOA-tips.blogspot.com/2010/06/starting-admin-and-managed-servers.html
  
  http://www.javamonamour.org/2011/09/nmconnect-nmstart-nmkill.html
  
  Experts, please give your opinion.
  
  Thank you very much
  N

  Hi Patricia,

  I had exactly the same problem some time ago...

  The cause:
  There are two servers trying to run in debug mode and use the same debug port
  -Xrunjdwp: transport = dt_socket, address = 8453, server = y, suspend = n

  Possible solutions:
  1. turn off debugging (this is what I did)
  2 use the various debugging ports to different servers (difficult to do because the servers share the same scripts)

  What worked for me was:
  1. in % DOMAIN_HOME%\bin, I created a script called startWebLogic_nodebug.cmd with the following content:
  %CD%\bin\startWebLogic.cmd /nodebug % *.
  2. in nodemanager.properties, I changed the following property
  StartScriptName = startWebLogic_nodebug.cmd

  Now my servers start without debugging...

  I hope this helps.

  See you soon,.
  Vlad

• error of Tivoli storage manager... not able to restore the file using rman

  Hi all
  
  I have one using AIX 64-bit os and oracle database 10g LF. I also use BR * tools and Tivoli Storage Manager for backup and storage. During the restore operation, I'm more error.file not restored to the Library Manager server...
  
  
  
  ERROR:
  Interface between BR * tools and Tivoli Storage Manager
  -Version 5, exit 4, change 0.1 for AIX 64-bit LF -.
  Version: 304B updated January 15, 2007
  (c) Copyright IBM Corporation, 1996, 2007, all rights reserved.
  
  BKI2027I: TSM-API version 5.4.0.0 using (compiled with 5.3.0.0).
  BKI2000I: Connected to the ProLE on port tdpr3ora64.
  BKI0005I: Start of the program at: Thu Dec 20 14:05:31 PAKST 2011.
  
  
  -Settings-
  Input file: / tmp/eaaBLimie
  Profile: /oracle/PEP/102_64/dbs/initPEP.utl
  File: /oracle/PEP/102_64/dbs/initPEP.bki
  Manual sorting file: disabled
  Trace file: disabled
  TraceFlags: disabled
  Parallel sessions: 2
  Multiplexing of files: disabled
  Compression of RL: disabled
  Output error: disabled
  LOT: disabled
  Buffer size: 131072
  Mode copy buffer: SIMPLE
  Redologcopies: disabled
  Release management: disabled
  Backup type: unknown
  Logs TSM server: disabled
  TSM server: 192.168.100.147:PPLTSMSRV with 2 sessions configured
  The TSM client node: PEPSRV01
  For the backup days: Mon Mar sea game Fri Sat Sun
  Backup mgmt class: MDB
  Class mgmt Archiv: MLOG1 MLOG2
  
  
  BKI5016I: Time: 20/12/11 14:05:42 new TSM session created: MGMNT CLASS:, TSM-Server: 192.168.100.147:PPLTSMSRV, type: SIMPLE
  BKI0027I: Time: 20/12/11 14:05:47 subject: 1 current 1: /oracle/PEP/sapbackup/behjszif.aff size: 67,991 KB, MGMNT-CLASS: MDB, TSM-server: 192.168.100.147:PPLTSMSRV.
  BKI0101I: Please enter 'c [have]' to continue or [high] "to cancel.
  s
  BKI0102I: Your answer: of '.
  BKI5010E: Error of Tivoli Storage Manager:
  ANS1314E (RC14) currently unavailable data file on the server
  * (RC = 14). *
  BKI1230E: The following file was not processed: oracle/PEP/sapbackup/behjszif.aff.
  
  #ERROR /oracle/PEP/sapbackup/behjszif.aff
  BKI1215I: Average transmission speed was 0.000 (0.000 MB/sec) GB/HR.
  BKI0020I: End of program: Thu Dec 20 14:07:27 PAKST 2011.
  BKI0021I: Duration: 01 min 56 sec.
  BKI0024I: Returns the code is: 2.
  BKI0024I: Returns the code is: 2.
  Press ENTER to continue...
  
  
  
  I am bit confused which... Why this error coming... for no matter what eror (RMAN) database... or due to an error of tivoli. Help, please...
  
  Published by: dbaforu on December 21, 2011 12:22

  Read the error message carefully
  especially the first line

  BKI5010E: Error of Tivoli Storage Manager:
  ANS1314E (RC14) currently unavailable data file on the server
  (rc = 14).
  BKI1230E: The following file was not processed: oracle/PEP/sapbackup/behjszif.aff.

  Not an Oracle error. IBM also has support forums.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• WebLogic Node Manager as a Windows Service

  Hi all
  
  I tried all my resources / google / etc to solve this problem.
  
  We have servers windows that we managers node and instances managed to run. As you can see, we start Node Manager under Windows Services.
  
  We have a network mapped to W: to \\wlsadminmachine\$WLS_SHARE share drive where we have entire folders of domain and Node Manager. I used BEA condition Node Manager install scripts and Service Windows are created. I specified a UNC path during the installation of the service. No problem.
  
  I opened regedit and look at the params.
  CmdLine =- client-Xms32m-Xmx200m - classpath ".;" E:\APPS\bea_x64\patch_weblogic923\profiles\default\sys_manifest_classpath\weblogic_patch.jar; E:\APPS\bea_x64\jrockit-R27.5.0-JDK1.5.0_14\lib\tools.jar; E:\APPS\bea_x64\WEBLOG~1\server\lib\weblogic_sp.jar; E:\APPS\bea_x64\WEBLOG~1\server\lib\weblogic.jar; E:\APPS\bea_x64\WEBLOG~1\server\lib\webservices.jar; »-Djava.Security.policy="E:\APPS\bea_x64\WEBLOG~1\server\lib\weblogic.policy «-Dweblogic.nodemanager.javaHome="E:\APPS\bea_x64\jrockit-R27.5.0-jdk1.5.0_14"- DListenAddress ="wlsadminmachine1"- DListenPort ="1011"weblogic. NodeManager
  
  JavaHome=E:\APPS\bea_x64\jrockit-R27.5.0-jdk1.5.0_14
  
  ExecDir = \\wlsadminmachine\$ WLS_SHARE\domain_dir\nodemanager
  
  Path = E:\APPS\bea_x64\WEBLOG~1\server\native\win\x64; E:\APPS\bea_x64\WEBLOG~1\server\bin; E:\APPS\bea_x64\jrockit-R27.5.0-JDK1.5.0_14\jre\bin; E:\APPS\bea_x64\jrockit-R27.5.0-JDK1.5.0_14\bin
  
  Log=\\wlsadminmachine\$WLS_SHARE\domain_dir\servers\NM_ADMIN_PROD_UPGR\NM_ADMIN_PROD_UPGR_service.log
  
  
  Security: I ensure that the Service is running as the user who shared the :) mapped drive
  
  When I try to run the service, I get an Error Message:
  ===================== Error Logs ==========================================
  [Fri Apr 23 14:51:41 2010] [ServiceStart] Thread created successfully
  [Fri Apr 23 14:51:41 2010] [Fri Apr 23 14:51:41 2010] [I] [ServiceStart] statement SCM of SERVICE_START_PENDING with delay = 0
  [E] [StartJVM] a fine of a JVM Impossible
  [Fri Apr 23 14:51:41 2010] [I] [ServiceStart] statement SERVICE_RUNNING SCM
  [Fri Apr 23 14:51:41 2010] [I] [ServiceStart] waiting for several events
  [Fri Apr 23 14:51:41 2010] [I] [ServiceStart] is waiting for several events. Wait = 1
  [Fri Apr 23 14:51:41 2010] [E] [ServiceStart] error in the JVM. Cause = could not find a JVM.
  [Fri Apr 23 14:51:41 2010] [I] [ServiceStart] inform SCM SERVICE_STOP
  ===================== Error Logs ==========================================
  
  I have being debugged the issue using the following URL: http://connectionserver.blogspot.com/2009/06/weblogic-as-windows-service.html
  
  I am able to run the command line node Manager except that my exec directory is W:\domain_dir\nodemanager.
  
  I've eliminated all wait because of the execution of java in the command prompt with exec as a uncpath [\\wlsadminmachine\$WLS_SHARE\domain_dir\nodemanager] directory.
  
  Details of the environment:
  Windows Enterprise Server 2008 SP 2
  Processor Intel Xeon CPU - 2
  16 GB OF RAM
  Operating system - 64 bit
  
  Strange behavior:
  When I try to install a Manager service node on the admin machine which is "wlsadminmachine" where the shared drive is available for the other Manager node servers, all works fine. This kind of proves that if the shared drive is local and not the network drive, it works. I'm really going crazy. Please help me.
  
  Thank you and best regards,
  Pazhanikanthan. P

  Hi Paz,

  Its great you did it works. In the interest of all those who may be blocked with how to map network drives when weblogic or node Manager must be run as a windows service, please go through the below.

  *******************************************************************************************

  http://download-llnw.Oracle.com/docs/CD/E13222_01/WLS/docs81/notes/resolved_sp05.html

  CR202167
  When beasvc on Win2003 starts a server on a network share, an error occurs is no longer.

  Now the network drive mapping happens within the service itself. The following new settings have been added to the beasvc:

  localName
  RemoteName
  RemoteUser
  RemotePassword
  Usage example:
  -localname: "X:»-remotename:"\\172.17.24.130\src810sp4"- remoteuser:"xyz"- remotepassword:"xyz ".
  You map \\172.17.24.130\src810sp4 to your local computer as X: and the remoteuser and remotepassword are used to connect to the remote computer.

  *******************************************************************************************

  Note: Services Windows runs as a different user session and is not the same as the session of the interactive user used to log on to the computer. Beasvc has therefore to map the drive under this different session and to get all the details in its configuration.

  Kind regards
  Carina

• Error: The property node (arg 8) visa to configure the Serial Port

  I'm trying to control 8 USB to R232 via a HUB of 10 ports Tripp-Lite (model U222-010-R) and do not have consistent results.  Just after rebooting my computer, I have no problem in running the following program: (I tried to download the VI directly but without success, so here's the extract)

  

  I made sure that the COM ports that I select are that one is available on both the Device Manager and in the NOT-MAX.  But after awhile, it does not work or if the HUB is unplugged and replugged in (even if the names are correct and up-to-date in devices and NOR-MAX Manager) I get the error code "property Node (arg 8) visa set up a Serial Port (Instr) .vi" I want to be able to see these ports consistantly more without having to restart my computer all the time.  Is there a better Setup for this? The previous installation of the computer has a PCI card for it and we have not had any problems with the code, but are facing problems with our upgrade.  The old computer ran Windows XP and had cards PCI and the new computer that I am using a Windows 8 and the USB HUB.  Thanks for any help you can give!

  Mr says:

  Jeff,

  It is a one off lines from specifications Tripp-lite:

  -On bus power, 500mA from the USB 2.0 computer port is shared between hub ports

  This would be in support of what I need or not necessarily?

  -Mr

  No! That's the 50mA by port not 500mA.  an order of magnitude full powered USB (if you want reliable - if you want real problems which appears irratically each time only and is a headache to track down which would)

• Error connecting to the Terminal for blackBerry Smartphones

  Hello

  I have a BB 8100, Desktop manager 4.6.

  The synchronization work properly 3-4 weeks ago.

  Today, when I tried to sync, I got this error message:

  0 x 80040fb3

  I tried debug it using the procedure of changing family name, first name, etc... without success

  I tried several times to synchronize again but without success.

  Now, the situation is even worse!

  New message when I connect my BB to my computer. When I run the Desktop Manager, I have the following error:

  "Error connecting to the Terminal. Make sure that your device is connected properly, and then try again.

  I can't not try to synchronize!

  It is very strange, it's never happened before.

  However, Desktop Manager recognize my BB, I can read on the button to the left of the screen: Terminal connected (Pin code) recognized xxxxxx.

  HELLLLP!

  Thank you

  You know what?

  I just read another post suggested.

  They simply offered to take off from the Blackberry battery and put it again.

  Then I tried to sync and IT WORKED! I can't believe! I tried a lot of complicated stuff!

  1 month for this problem! (with this simple solution!)

  Hope that now, everything will be ok!

  Concerning

• Problem starting managed server and Node Manager

  Hello

  I created the WebLogic domain with 2 managed servers. I use Jdevevloper11.2.3 integrated WebLogic server.  I can't start the servers ManagedWebLogic. On the console, I get an error stating:

  "For the server Server1, the Node Manager associated with new_Machine_1 of the machine is not accessible."

  Nor any of the management server is started through the startManagedWebLogic.cmd. Any help on this?

  Hello

  To start the managed from the console server, you must first start the node Manager process and then you can start managed based on the console server.

  Find the link to the screenshot of how to configure Nodemanager and start the managed server.

  NODE MANAGER configuration and starting managed server from Console - weblogicexpert

  To start the managed break with start-up follow the link below Scrip.

  Starting/Stoping Weblogic Managed Server - weblogicexpert

  It may be useful

• The Node Manager associate machine MyServer01 is not accessible

  Hello
  
  I work with the version 11.1.2.2, my EssbaseAdminServices0 from the logical Web server running.
  I have the following error when I started s EssbaseAdminServices0.
  
  1. for EssbaseAdminServices0, the node Manager server machine MyServer01 is not accessible.
  2. all selected servers are currently in a State which is not compatible with this operation or are not associated with a Node Manager running or you are not authorized to perform the requested action. No action will be taken.
  
  
  I checked Node Manager in services, but it is not present in the services also.can u suggest me how can I get Node Manager.
  So could you please tell me how should I start my EssbaseAdminServices0 of web logic server.
  
  Thank you

  You must have windows services for each of the Web start Applications and then for example 'Hyperion Foundation Services - Managed Server'
  If you want to create the node Manager as a service there is a script to \wlserver_10.3\server\bin\installNodeMgrSvc.cmd

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Problem: WebLogic Node Manager under Windows Services

  Hi all
  
  Details of the environment :
  -Windows Server 2008 R2 - x 64
  -Oracle WebLogic Server 11 g R1 (10.3.6.0) - generic
  -Reports and forms oracle 11g R2 (11.1.2.0) - x 64
  -Oracle JRockit JDK R28.3.0 - x 64
  
  I have windows servers that we want managers node and managed to run instances. As you can see I would like to run Node Manager under Windows Services.
  
  I use this guide:
  
  < a link = http://wlsjavatips.blogspot.com/2009/09/how-to-install-node-manager-as-windows.html >http://wlsjavatips.blogspot.com/2009/09/how-to-install-node-manager-as-windows.html< /a >
  
  Create boot.properties that include the user name and password:
  
  - AdminServer (location: < WL_HOME > \user_projects\domains\ < DomainName > \servers\AdminServer\data\nodemanager)
  - WLS_FORMS (location: < WL_HOME > \user_projects\domains\ < DomainName > \servers\WLS_FORMS\data\nodemanager)
  - WLS_REPORTS (location: < WL_HOME > \user_projects\domains\ < DomainName > \servers\WLS_REPORTS\data\nodemanager)
  
  Results :
  1 are you able to automatically start all servers (AdminServer, WLS_FORMS and WLS_REPORTS) after the server restarted.
  2. I can't access to http:// < hostname >: 7001/console, < hostname > http://: 7001/em, http:// < hostname >: 9001/forms/frmservletand http:// < hostname >: 9002/reports/rwservlet
  
  Questions :
  1. on WebLogic Console http:// < hostname >: 7001/console, the status of AdminServer, WLS_FORMS and WLS_REPORTS are running, but the State of health is OK just to AdminServer, and others have no status.
  2. as I said before, I can run my form on http:// < hostname >: 9001/forms/frmservlet and run my report on http:// < hostname >: 9002/reports/rwservlet. But when I found
  on Order FM OEM http:// < hostname >: 7001/em, the State of WLS_FORMS and WLS_REPORTS are down. I can't monitor sessions connected to the server and I can not change the configurations via EM.
  
  Any help is greatly appreciated and sorry for my bad English.
  
  Thank you and best regards,
  
  -Rob-

  Hello

  After a reboot the server I had the same problem, also windows environment. AdminServer but OK/console WLS_FORMS and WLS_REPORTS nothing.

  Process Explorer indicated there are 3 java process for each server that had begun the nodemanager (beasvc)
  Also everything worked very well for end users, but not for the side default where forms and reports where "down".

  I added settings offers and reinstalled the service nodemanger. But always without success.

  Finally I solved it by stopping the servers (WLS_FORMS and WLS_REPORTS) in the / console and by them from the option default (fusion middleware control)

  Everything is 'healthy' and 'OK' again!

  I think that nodemanager and the opmn obtained in a "things are complicated" after the break-up... I mean :) server restart

  Greetz,

  B.

• Vclient and VC will not connect to update manager

  I have 2 servers VC (version 4) running in mode bound, who had an IP address change.  Since this change to the update manager no longer works for Vsphere client running on my PC or directly on the VC server with client sphere.

  The error screenshot is attached:

  There was an error connecting to VMware vCenter Update Manager - hostname:8084.  Cannot communicate with the remote host or network or because the host is not responding errors.

  I am able to ping each server VC from the other...

  Firewall ports have been opened for outbound connections retrieve updates.

  Is there anything I can do, or should do after and IP address change.

  I think you need to change the setting for your VMUM too, because you change the IP address of vCenter (have you installed VMUM on this system that has changed its IP address?)

  check 1011858 KB

  -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

  -= If there is a mistake in my notes, please correct me! =-

  -= Thank you =-

  MCTS, VCP

• NPE when starting Node Manager in SOA 11.1.1.5

  I have installed SOA Suite 11 g (11.1.1.5) as directed by the Start Guide quick Oracle SOA Suite 11.1.1.5.
  
  I start the database and the Weblogic administration server. When I try to start the node Manager, I get following error:
  -----------------------------------------
  November 1, 2011 09:23:28 < init > weblogic.nodemanager.server.NMServer
  Warning: property Node file manager configuration ' C:\Oracle\MIDDLE~3\WLSERV~1
  .3\common\NODEMA ~ 1\nodemanager. Properties' could not be found. Using the default settings.
  < November 1, 2011 09:23:28 > < INFO > < save the configuration properties node manager for
  "C:\Oracle\MIDDLE~3\WLSERV~1.3\common\NODEMA~1\nodemanager.properties" >
  November 1, 2011 09:23:28 < init > weblogic.nodemanager.server.NMServer
  INFO: Save the configuration properties node manager to ' C:\Oracle\MIDDLE~3\WLSERV
  ~ ' 1.3\common\NODEMA~1\nodemanager.properties
  < November 1, 2011 09:23:28 > < SEVERE > < fatal error in the Server Manager node >
  java.lang.NullPointerException
  at java.util.Hashtable.containsKey(Hashtable.java:314)
  at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList (NMServ
  erConfig.java:491)
  at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList (NMServe
  rConfig.java:481)
  at weblogic.nodemanager.server.NMServerConfig.getConfigProperties (NMServ
  erConfig.java:545)
  to weblogic.nodemanager.server.NMServer. < init > (NMServer.java:154)
  at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
  in weblogic. NodeManager.main (NodeManager.java:31)
  
  November 1, 2011 09:23:28 main weblogic.nodemanager.server.NMServer
  SEVERE: Fatal error in the Server Manager node.
  java.lang.NullPointerException
  at java.util.Hashtable.containsKey(Hashtable.java:314)
  at weblogic.nodemanager.server.NMServerConfig.initNetworkInfoList (NMServ
  erConfig.java:491)
  at weblogic.nodemanager.server.NMServerConfig.getNetworkInfoList (NMServe
  rConfig.java:481)
  at weblogic.nodemanager.server.NMServerConfig.getConfigProperties (NMServ
  erConfig.java:545)
  to weblogic.nodemanager.server.NMServer. < init > (NMServer.java:154)
  at weblogic.nodemanager.server.NMServer.main(NMServer.java:375)
  in weblogic. NodeManager.main (NodeManager.java:31)
  
  C:\Oracle\MIDDLE~3\WLSERV~1.3\common\NODEMA~1 > end goto
  
  C:\Oracle\MIDDLE~3\WLSERV~1.3\common\NODEMA~1 > ENDLOCAL
  
  C:\Oracle\Middleware\wlserver_10.3\server\bin >
  ---------------------------------------------------
  
  I checked the directory 'C:\Oracle\Middleware\wlserver_10.3\common\nodemanager '. There is no nodemanager.properties file there. I have to create manually?
  
  Please notify.
  Thank you
  Vivek

  I copy and paste the description of the note. There is a statement with the cause that States

  "This problem only occurs when the display name of a NETWORK card configured for the nodemanager migrations is null"

  and it is a bit ambiguous. It implies, it is a solution to put the full name, but isn't discussing how to apply this workaround; the display name, it refers to generated by a call to the method NetworkInterface.getDisplayName () of the JDK.

  I guess the name displayed here is the parameter called Interface within the nodemanger.properties, but there is nothing in the note which confirms this, or if this naming NICE will fix this problem. Here is a complete list of the file nodemanger.propertes-> http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/java_nodemgr.html#wp1068415

  I would like to download and try the patch in your place; It of a WLS patch (like nodemanager belongs to WLS) so should not affect the SOA Suite. Otherwise, open a SR.

• Error connecting to SQL Server Express using jTDS

  Hi all! It's my first time using JDBC, and I followed some examples online to establish a test to my internal DB SQL Server Express connection. Here's the Basic code that I use (with security identification information redacted, of course):
  

  public static Connection getConnection() throws Exception {
      Connection conn = null;
          
      try {
          Class.forName("net.sourceforge.jtds.jdbc.Driver");
          conn = DriverManager.getConnection("jdbc:jtds:sqlserver://WINSERVER/database", "username", "password");
      }
      catch(SQLException e) {
          throw new Exception("Error connecting to database: " + e.getMessage());
      }
      catch(ClassNotFoundException e) {
          throw new Exception(e.getMessage());
      }
  
      System.out.println("Connected to database");
      return conn;
    }

  I get this error after 20 seconds: "network error IOException: Connection timed out: connect. I understand this is usually caused by a bad port, username or password, but I can connect using the exact same credentials via SQL Management Studio Express. I tried to insert port number: 1433 after the name of the server and the name of the comic, but no joy. Can someone tell me what is the 'official' syntax, or how I would go about solving this problem? Thanks in advance.
  
  Zach

  I get this error after 20 seconds: "network error IOException: Connection timed out: connect. I understand that this is usually caused by a bad port, user name or password.

  Fairly certain that most of the last part of this is incorrect since your instance information.

  If you connect to a server using what anyone, even remotely, as a true lan so if the server is not listening you will get an immediate connection error - saying something to the topic "connection refused." And if your creds user do not match you will get a different error.

  A timeout after 20 seconds means that the network request is not being served at all, by the other other end.

  And that suggests a firewall problem.

  A simple test is the following
  -Log in as the same user that the application is running as. If you are working on the app, it's you. Is there a sort of JEE or service/cron, then it is very likely that you.
  -Open a console window.
  -Use telnet to connect using EXACTLY the same hostname and port that you expect. An example

  Telnet 1433 WINSERVER

  If telnet is successful it will give you a white screen (or something similar). Failure will give an error.

  The above process verifies that your box and the credentials of the user of the process (no connection) can successfully access the db box. Until it works your java code is not.

  Common default for SQL Server ports 1433 and 1434. It can be configured to use anything else.

• DAC message any plan of running - "Error when loading nodes"

  I just install and configure Informatica 8.6.1, DAC, BI apps 7.9.6 properties for an instance of source Oracle Ebs R12.1.1
  
  In informatica, I've defined 2 relational sources "DataWarehouse" and "ORA_R1211" - the same names in the DAC's physical data sources
  
  I mentioned the flatfile as 'ORA_R1211_Flatfile' parameter in DAC
  
  After successfully build, when I run the ETL error "Error loading nodes" occurs.
  
  the log file shows the following:
  
  **********
  BEGINNING OF ETL
  
  --------------------------------------------
  20 SEVERUS Sat Apr 23 21:57:58 GST 2011
  FAULT INFO: Error loading of nodes.
  CLASS EXCEPTION: java.lang.NullPointerException
  
  com.siebel.etl.engine.core.SessionHandler.getNodes(SessionHandler.java:2842)
  com.siebel.etl.engine.core.SessionHandler.loadNodes(SessionHandler.java:473)
  com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:372)
  com.siebel.etl.engine.core.ETL.run(ETL.java:658)
  com.siebel.etl.engine.core.ETL.execute(ETL.java:910)
  com.siebel.etl.etlmanager.EtlExecutionManager$ 1.executeEtlProcess(EtlExecutionManager.java:210)
  com.siebel.etl.etlmanager.EtlExecutionManager$ 1.run(EtlExecutionManager.java:165)
  java.lang.Thread.run(Thread.java:619)
  21 SEVERUS Sat Apr 23 21:57:58 GST 2011
  ************************************************************
  CLOSING THE CONNECTION POOL Data Warehouse
  
  ************************************************************
  
  SEVERUS Sat Apr 23 22 21:57:58 GST 2011
  ************************************************************
  CLOSING OF THE CONNECTION POOL ORA_R1211
  
  ************************************************************
  
  23 SEVERUS Sat Apr 23 21:57:58 GST 2011
  --------------------------------------------
  
  END OF THE ETL
  *****************

  Hello

  Mark the current as EP being completed and re - assemble portion, build parameters, and generate the EP and run charge.

  Thank you
  Navin KumarBolla