Error: "could not allocate memory..." »

Similar Questions

• When installing Oracle BI 12 c on AIX is xmalloc of error: could not allocate 2112164888 bytes (0 bytes allocated)

  Dear all

  I was asked to install Oracle BI server on an AIX 6.1 Server 12 c old we have.

  I have JAVA SDK 7 which is supposed to be certified with both weblogic and BI 12 c

  I have installed weblogic with no problems, but when you call BI installation I get this error

  xmalloc: could not allocate 2112164888 bytes (0 bytes allocated)

  I tried to adjust/etc/security/limits

  $ ulimit - a

  Time (seconds) unlimited

  leader (Blocks) unlimited

  Data (KBytes) unlimited

  Stack (KBytes) 196608

  Memory (KBytes) unlimited

  coredump (Blocks) unlimited

  nofiles (descriptors) 65536

  threads (per process) unlimited

  process (per user) unlimited

  I don't know if this is related but I thought that it might help, but it didn't

  I have enough memory on the server, so what else could be wrong?

  Thank you all

  He is certified according to

  http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1212certmatrix-1970069.xls

  in any case, I found the solution, I don't even believe that such a thing has stopped me for a long time

  I only had to run the command from the same directory where the bin file!
  I used to run it like this

  . // bi_platform - 12.2.1.0.0_aix_ppc64.bin

  I should go the location first, then executez./bi_platform-12.2.1.0.0_aix_ppc64.bin

  Thanks to you all

• Flashback DR server error: could not allocate the newspaper flashback

  Hello
  
  I have a database of Eve and the DR journal with primary database synchronization was interrupted from under errors cause:
  
  Impossible to allocate the newspaper flashback to 1946 blocks of
  current area of size 2147483648 bytes.
  Writer (RVWR) recovery is blocked until more space is
  available in the recovery area.
  Cannot write the Flashback database log data because the
  recovery area is full, presence of a guarantee
  restore point and no newspaper reusable flashback.
  Use ALTER SYSTEM SET db_recovery_file_dest_size command
  to add a space. DO NOT manually REMOVE the flashback logs
  to create a space.
  
  -> The DR Server
  
  SQL > SELECT SWITCHOVER_STATUS, PROTECTION_MODE, DATABASE_ROLE, PROTECTION_LEVEL, INSTANCE V DB_UNIQUE_NAME OPEN_MODE $ DATABASE;
  
  DATABASE_ROLE INSTANCE PROTECTION PROTECTION_LEVEL
  ---------------- ------------------------------ ---------- --------------------
  SWITCHOVER_STATUS
  --------------------
  A80 ENSURES PHYSICS MOUNTED A MAXIMUM PERFORMANCE
  ACTIVE SESSIONS
  
  SQL > select process, status, thread #, sequence #, block #, blocks from v$ managed_standby;
  
  STATUS OF PROCESS THREAD # SEQUENCE # BLOCK # BLOCKS
  --------- ------------ ---------- ---------- ---------- ----------
  ARCH CONNECTED 0 0 0 0
  ARCH CONNECTED 0 0 0 0
  MRP0 1 29118 125049 186723 APPLYING_LOG
  RFS IDLE 0 0 0 0
  RFS IDLE 0 0 0 0
  RFS IDLE 0 0 0 0
  
  6 selected lines.
  
  -> Alerts log
  
  Sat Mar 17 04:51 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29222_0681431456.001."
  Primary database is in MAXIMUM PERFORMANCE mode
  Sat Mar 17 05:51:07 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29223_0681431456.001."
  Primary database is in MAXIMUM PERFORMANCE mode
  Sat Mar 17 06:51:04 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29224_0681431456.001."
  Primary database is in MAXIMUM PERFORMANCE mode
  Sat Mar 17 08:50:40 2012
  RFS [606]: journal Archives: "L:\ORACLE\A80\ORAARCH\A80ARCH\ARC29225_0681431456.001."
  Sat Mar 17 12:28:30 2012
  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
  
  
  I did an "ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL" to stop sending newspapers on DR server but the command is suspended.
  
  I also tried freeing disk space in my flashback reader, but I think it will not help as it is shown in the error message:
  'DO NOT manually remove flashback logs to create space'.
  
  What is the best way to configure the server to DR return to normal operation?
  I did not have the flashback logs and will disable the flashback once this is rectified.
  
  This is Oracle 10.2.0.4 physical standby using Oracle Dataguard.
  
  Thank you very much!

  Hello again;

  change the flashback of the database

  Select flashback_on in the database of v$.

  Or for simply FRA

  ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = "scope = both;

  Best regards

  mseberg

• Could not allocate memory or additional processors in an image file in 10 workstation

  Hi all.  I have a workstation image created originally on AWS (Amazon) and exported to a VMWare image.  I use the last workstation 10.0.0.7, and cannot change the allocated memory (or the number of processors) for the image.  I tried this on 2 machines and the allocated memory will remain unchanged to 2 GB and a single processor.  A machine is a Pro MS Surface 3 with 8 GB 8.1 Windows running, the other is a Lenovo Thinkpad laptop with 16 GB also runs win 8.1.  The settings are grayed out so I can't type or use the cursor in any direction.

  Can anyone help?  Of course, to the point that it is the image works slow with only 2 GB allocated, is unacceptable.

  Thank you!!

  Change the values for the RAM and the processor must be done when the virtual machine is turned off, not suspended.

  If you cannot change these values even with the virtual machine off - try changing the vmx file directly.

• I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g meory and with 3.6 ghz cpu

  I installed photoshop CC2015 on eight computers. Whenever we open the file tif 582 MB, came error "could not complete the command because thre is not enough memory. However, we have 32 g of meory and with 3.6 ghz cpu can someone, please give some me help on this issue?

  How much memory you allocate to Photoshop in the preferences?

  Terri

• An error occurred during the execution of the request for export: could not allocate space for object ' dbo. DS_Property_Member_Array'. 'IdxPropMbrArr04' to database 'EPMA' because the 'PRIMARY' filegroup is full.

  Cannot deploy the planning application. I get the following message.

  Detail: An error has occurred during execution of the export demand: could not allocate space for object ' dbo. DS_Property_Member_Array'. 'IdxPropMbrArr04' to database 'EPMA' because the 'PRIMARY' filegroup is full. Create disk space by deleting unnecessary files, removing objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on it to the existing files in the file group.

  No idea where I need to check the space I checked my essbase server and workspace and they both seem to have enough space for a normal deployment.

  It's a question on the SQL Server database with the allocation of space, searching the Internet for something like "Create disk space by deleting unnecessary files, removing objects in the filegroup" and you should get a lot of results.

  For example - the primary filegroup is full SQL Server 2008 - database to stack Exchange administrators

  See you soon

  John

• Stage of JavaFX Builder 1.0 error: could not create the Virtual Machine Java.

  Hello
  I have installed JavaFX scene Builder under Windows 7 x 32. The installation process is OK, but when I try to launch the app it crashes and displays an error that says:
  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  
  I installed JVM 7u5, JDK 7u5, JavaFX SDK 2.1.1 JavaFX 2.1.1 (Java EE JDK + Glassfish) I would be grateful if someone could tell me if there is something missing. I reinstalled almost all software java several times, but without success.
  
  Kind regards!
  
  Published by: 942925 on June 26, 2012 10:23

  Hello

  This message appears usually when the JVM cannot allocate sufficient memory. It may be the consequence of the stage Builder set - Xmx1024m command line: this is currently followed by default TLD-4515 and will be fixed in the next few weeks.
  For the time being you can give a try on a system with more memory. Moreover, what is your current hardware configuration?
  Concerning

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• I can't reinstall firefox, I get the error 'Could not load profile' and not a solution I found works. / Appdata/roaming/mozilla folder is not accessible.

  I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?

  I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.

• Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

  Hello

  A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

  This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

  PLEASE HELP ME WITH THIS!

  Thank you.

  See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
  Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

  Then set it up again, create fingerprints and take advantage of the laptop.

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• error: could not write the destination file (1 003)

  I am trying to export 40 photos of Photos.  I just installed OX El Capitan.  Only 13 of them get downloadable.  For the rest, I get this message: error: could not write the destination file (1 003)

  I tried to manually fix the library but still does not work (command + option + opening photos).

  And I do not have a backup on icloud photo library I have a backup on an external drive...

  You try to export the originals of your photos or revised versions?

  When you try to export photos to?

  You try to export to a folder on your system drive or a folder on an external drive?  If an external drive, which is the file system? And how the player is connected?

  You have permissions to write to the folder, when you export to?

• Darwin/BSD connection error: could not check hide

  Hello world

  I use OS X 10.6 (sorry, could not get the exact version that I couldn't start my iMac in all), my iTunes or other apps like Skype freeze every time at startup. I found an article that fixed this kind of issue by finding the "defective" or files using the activity monitor--> by clicking on "Inspect" on iTunes, looking at opening files/ports and the latter would be the "guilty", in this case, I noticed that apps froze every time when the file "audit_user" appeared. At that time I didn't know it is a crucial issue and I've moved the file to the Recycle Bin, was not able to clear the tray even though, as he was still "to used.

  Then when I rebooted my Mac, the Darwin/BSD login screen appeared, I typed in my username and password but failed due to the error 'could not hide audit\n', so it is perhaps as a result of move me the file to the Recycle Bin (which is still there, I think that).

  Can someone show me how to solve this problem? I tried to restart using single-user safe mood and it seems that the drive is OK.

  Help, please! Thank you very much!

  Sorry for typo's fault, the error message was actually "not usher audit mask\n".

  Tried to take my machine for maintenance in the local store but they have mentioned that this is a vintage unit, so could not help more

  Grateful if someone could help me on this, thank you!

• LabVIEW code 3 error: could not load façade.

  Hello

  I was the second time the "LabVIEW code 3 error: could not load before sign.» When you use the development of LabVIEW 2009 SP1 environment.

  It's really annoying that I waste time as I have to go back to previously saved code.

  Does anyone know where it comes from and how to avoid it?

  Thank you

  Pawel

  Pawel,

  If the façade is damaged, there is little that we can really do about it. So the best thing is to make sure that the front will never get corrupted at all.

  You can write a small VI using VI Server to check the position of the element in your VI. If there is way to positions of reposition before saving the VI.

  Another reason could be much, duplication of controls (including the faulty XControls?)...

  hope this helps,

  Norbert