Error D 800700, cannot update ServPac1.
I can't upgrade to Service Pack 1, it fails and I get an error code of 8007000D.
I did a factory restore with the new acer aspire 5336 records of Service and food and language. Win 7 Home Premium - 64-bit.
I have used aid and two Microsoft solutions to check and test and install "HotShot", but no success yet.
I was able to update the many updates but now up to 9, including SP1 and any update. I turned off Microsoft Firewall, did not help.
I tried the proposed aid centre and the application of Fixer who said she fixed something and try again, but I may not get updated to the Service Pack 1 for Windows 7.
I tried this, but without going, http://support.microsoft.com/kb/947821
I used the 64 bit version. He said he didn't, I can't restart, it said it was installing 8 updates during the closure, HD continued to run after the screen went black, I waited until the HD light went out, rebooted, went to look for updates, it first says only 3 remaining then the thing daXn changed while I watched him and he changed to 9 available updates ,
I need help please. Here is my system info
Name of the operating system Microsoft Windows 7 Home Premium
Version 6.1.7600 Build 7600
Another Description of the OS is not available
Manufacturer of operating system Microsoft Corporation
Name of the ASPIRE PC system
System manufacturer Acer
Aspire 5336 system model
System Type x 64-based PC
Processor Intel (r) Celeron (r) CPU 900 @ 2.20 GHz, 2194 Mhz, 1 Lossnay, 1 logical processors
BIOS Version/Date Acer V1.13, 26/04/2011
SMBIOS Version 2.4
Windows directory C:\Windows
System directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
The local United States
Hardware Abstraction Layer Version = "6.1.7600.16385".
The aspire PC\aspire user name
Eastern Daylight Time zone
Physical memory (RAM) installed 3.00 GB
2.93 GB total physical memory
1.77 GB available physical memory
5.86 GB total virtual memory
4.44 GB available virtual memory
2.93 GB page file space
Paging file C:\pagefile.sys
Yes, it will work, but you should not use the product key from the sticker located at the bottom of the laptop (sometimes inside the battery compartment) to activate Windows. You must also download and install the device drivers on the Acer support site: http://us.acer.com/ac/en/US/content/drivers
========================================================
Download Windows 7 proper. ISO file that includes Service Pack 1
(Note: must match for your product key version)
Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso
Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso
Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso
How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit
After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.
Create a Windows 7 Bootable DVD using the. ISO file
Engraving of a file of Windows 7 ISO on a DVD
http://support.Microsoft.com/default.aspx/KB/977640
ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
It supports a wide range of image file formats, and it's free.
(BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
http://www.ImgBurn.com/
Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
(Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)
Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.
====================== Keyless Install ================================
How to make a 'Keyless Install"of Windows:
Boot from the Windows 7 DVD disc, you create and launch the installation.
After you have entered the user name and password that you will be asked:
"Type your Windows product key", do not enter a key.
Also located just below the box where you enter the key is a box with a check mark
to "Automatically activate Windows when I'm online", remove the check box and click "next".
You now have a 30-day grace period to activate Windows.
During this 30-day grace period you can try to solve your problems.
After you are satisfied with all the problems have been resovled then activate Windows.
====================== Device Drivers ===============================
Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number. Acer support: http://us.acer.com/ac/en/US/content/drivers
If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems
Graphics/video drivers:
Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us
= How to activate Windows 7 by Internet =.
1) click Start and in the search for box type: activate
2) click on the 'Activate Windows' option at the top of the list
3) click on "now, activate Windows online.
(4) enter your 25-character product key (not case sensitive)
5) click "Next" and wait for the key must be verified.
Another method - to reach a real person:
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)
The phone number is not working:
Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx
Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
J W Stuart: http://www.pagestart.com
Tags: Windows
Similar Questions
-
KB952155 Setup Error.
While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3Eivind Aakhus Hello,
If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.
Follow these steps to activate the ActiveX module.
a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.
b. click Tools, point to manage add-ons and then click Enable or disable add-ons.
c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.
d. choose the one you want to activate, and then select Enable.
-
having problem doing the last update for windows PowerShell 2.0 and winrm 2.0 code error 80070026 please help he is unable to update my laptop.
The error that you receive on the Windows Update page is 0 x 80070026 (ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE) seems to be the problem with the update being corrupted during the download somehow.
I will recommend allows you to perform a sweep of auditor of file system (CFS) to make sure that the Windows system files are in place and not the origin of the problem.
You can try to follow the given article:
http://support.Microsoft.com/default.aspx/KB/936212>
NOTE: If the SFC Scan doesn't find any errors on the machine, you can download updates manually on the computer from the given link and install it:
You can also try the following article to reset Windows Component Update:
http://support.Microsoft.com/kb/971058>
~ or ~.
I would recommend that you...
Launch a collateral request for assistance free Windows Update:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>
Support for Windows Update:
http://support.Microsoft.com/GP/wusupport>
`~`
03/08 / 1103:22: 52 am
-
What can I do? I get this error when updating the app Photoshop CC (U44M1P34)
U44... Update error http://forums.adobe.com/thread/1289956 can help
-
Error number: PMT_000008 - cannot update my credit card information
I need to update my credit card information, but every time I try to update I get this error message:
Server error
Error:
We are not able to perform the selected action. Please accept our apologies for this inconvenience. We have been notified and are already working to fix this as quickly as possible. Please click the back button on your browser and try this action at a later date or take a different action.
Error number: PMT_000008
I contacted the live chat twice in the last 24 hours, but they could not help me. They promised I will be contacted by phone, but nobody called.
In forums, I see this error reappeared since 2014 but no solution has been proposed.
Any help would be appreciated.
Thank you!
mydew28,
To update payment information please Contact Customer Care
[Note: make sure that you are connected to the Web site with the valid Adobe ID under which the product is]
-
Installing Win AP Automation! 3.0 to accelerate VB Express 2010.
Warning message:
Update for MS Wim (KB971513) Setup error
Setup cannot update your Windows XP files because the language installed on your system is different from the update language.
My XP language is Norwegian. The rest of my 'stuff' MS is English.
- What you have already tried to solve the problem
Hello
I suggest you to check the article mentioned below.
Error message: Setup cannot update your Windows XP files
http://support.Microsoft.com/kb/555042
I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
LR CC Flickr-"cannot update this collection" an internal error has occurred:
I'm trying to publish a new collection on Flickr, I get the error message:
Cannot update this collection.
An internal error has occurred: error
Domain = NSXMLParserErrorDomain Code = 4"line 1:
Document is empty
"UserInfo = 0x618004c7c0c0
(NSLocalizedDescription = line 1: Document is empty)
}
I uploaded a jpeg only okay, but it will only download a collection of 45. I have tried the LR5 and get the same result.
Any help is appreciated.
Hi Photoscot,
Please follow the steps below.
1 file > Plugin Manager...
2. Select "Flickr" on the left.
3. on the right, expand the 'Author of plug-in tools' section, and then click «Reload plugin»
4 restart Lightroom and try again.
I hope this helps.
~ UL
-
I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).
We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.
If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
-
Error code: 80243004 (cannot install updates)
error 80243004 while installing updates
Hello1. which updates cannot install?2. what operating system do you use?Method 1.Windows provides a built-in utility that can automatically find and fix some problems with Windows Update.Open the Windows Update troubleshooting tool by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under system and security, click Fix problems with Windows Update. For more information, refer to the article below.Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updatesMethod 2.If the problem persists download us this update manually and install. Here is the link:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5a058f6f-c3d3-4cbb-8c6c-ac76c94d3d0e&displaylang=enAlso have a look at the article below.Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an updateThanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Error code: 8024200d (cannot install updates)
Error code: 8024200d (cannot install updates)
Error 0x8024200D code is:
SUS_E_UH_NEEDANOTHERDOWNLOAD
The Setup program requires more data to downloadOption 1 - Download updates manually and install the same (you can find the same via number KB) -http://www.microsoft.com/downloads/en/default.aspx
or you can simply try.
Option 2 - How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058FYI - read - http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395
Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work. I haves Windows Vista Home Premium SP2
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
Cannot update Windows Vista kb971468 due to the error message 800B0100__
Cannot update Windows Vista kb971468 due to the error 800b0100 of message
Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
http://support.Microsoft.com/kb/958045Vista SP1 or SP2 installed?
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
ERROR CODE KB 970653 CANNOT UPDATE ERROR 800706431 CODE
ERROR CODE KB 970653... CANNOT UPDATE... 800706431 ERROR CODE. DIDN'T TRY TO UPDATE SEVERAL TIMES NO LUCK. CAN ANYONE HELP PLEASE
Eileen,
I need you to check the error code that you found. The one you posted is 1 number more than normal. If you go to Windows Update, then select "View installed updates", it will show you both the updates failed. Double-click the update failed and get the error code of the info box.You can also check this article: Troubleshooting Windows Update Installation questions
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Tried to do a Windows Update and received the error message
Windows Update 8007000 b errorI tried the solution proposed in the windows of the promp command of the Administrators account
true fsutil resource setautoreset C:\
and received the error message.Error: The system cannot find the specified file.
What now?
Problem disappeared.
I downloaded two no microsoft updates and restarted my computer. Then, I downloaded the updates from microsoft that now installed successfully.
-
Cannot update my computer (error 0x8024002D
Also Error 1706 Setup cannot find the required files
Hi Suxie,
Thanks for posting in the Microsoft community.
If I understand correctly that you are unable to update my computer with error 0x8024002D and also you receive error 1706 Setup cannot find the required files.
I suggest you to see the links and check.
Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024002D".
http://support.Microsoft.com/kb/958041
I also suggest you to see link and check.
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
http://support.Microsoft.com/kb/906602
Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.
Maybe you are looking for
-
How can I sync my photo albums to my iPhone/iPad without library iCloud?
I've finally updated Photos from iPhoto, having held out but enjoying some iPhoto support point is likely to be deleted. I managed to recreate my events such as Albums, relatively painless, in Photos. However, now when I try to sync via iTunes for t
-
How to remove mail from the Mail Archives? Where are stored the archived messages?
Where are stored the archived messages? I tried to remove them, but they reappear in the file archive. In addition, now all my messages in the Inbox are automatically archived. Why is this?
-
machine virtual Java and jdk 1.4.2
page of the Bank not opening not n, it is in error that your browser have not java. your browser is used in Samsung tab 2. with android 4.3
-
Why can't I open Firefox 4.0 Beta again? Only once?
Yesterday, I downloaded an overview of Firefox 4.0 beta 1 and had a blast playing with it, but this morning I went to try once again and now its just back to normal in Firefox 3.6. I double-clicked the new icon of 4.0 in several places, (Start Menu,
-
need to update microsoft office 2000
I don't know even what Web site, click on update my office 2000. Please advise!