error "data already in use"-SR1710NX

Similar Questions

• Satellite A200: Modem has an error 633: already in use or is not configured properly

  My laptop is A200-FE0.

  When I tried to make a dial-up connection, there is a window of error says:
  "Error 633: the modem (or other connecting device) is already in use or is.
  not configured correctly.

  When I test my modem by clicking the modem of the request under the Diagnostics tab in the modems tool of the
  The modem control panel, normally responds and seem to work
  correctly.

  When I test my modem using Toshiba diagnostic tools, it displays "pass" and I canhear the tone Dáil too.

  I tired to edition and reinstall the driver twice.
  But I can't make a dial-up connection and get error 633. I'm really upset about it.

  Please help me! Thank you very much!

  Check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=27402

• Error modem already in use or is not configured properly

  Original title: try to use the modem internet cleartalk on laptop

  Downloaded there screen says.  but when I try to connect it gives me an error that it is already in use or is not configured correctly. It is of ClearTalk EVDO Mobile Broadband

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use?

  3. What is the model number of your computer modem?

  4. do you have other devices connected to the computer?

  The error you receive is typical of drivers who don't are incorrect or not installed. You run the system with UAC turned?

  I recommend you to connect the modem to another computer that is running Windows Vista and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  You can also try the following methods and check if it helps.

  Method 1:
  To resolve this problem, remove the modem, and then restart the computer. When the computer restarts, Windows detects the modem and attempts to install the driver appropriate for that. To do this, follow these steps:
  a. log in the computer as an administrator or as a member of the Administrators group.
  b. click Start and then click Control Panel.
  c. double-click phone and Modem Options.
  d. click the Modems tab.
  e. in the following modems are installed list, click the modem that you want to delete and then click Delete .
  f. click Yes in response to the ""are you sure you want to remove the modem selected from your system? " " message.
  g. restart the computer.
  h. the found new hardware wizard starts. Follow the instructions in the wizard to reinstall the modem.

  Method 2:
  You can re-install the modem driver on the manufacturer's Web site and check.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Reference:--

  Solve the problems associated with the modem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Impossible to activate Vista, error: product already in use.

  Original title: activation of Vista.

  I'm trying to activate my vista Home premium on a new drive hard asmy old hard drive failed, but he repeats to me product already in use! How can I activate my product now? as I said I had it installed on a different hard drive but that didn't need now to activate the product on the new hard drive!

  Check how to activate Vista in tribune, here:

  http://support.Microsoft.com/kb/940315

  Tom Ferguson

• Unable to activate Windows Vista, error: key already in use.

  Original title: help!

  would like to know why my windows vista key won't suddenly turn on?  I bought legitimate about 5 years ago.  After formatting my computer, he refuses to re - activate after the episode.  don't ever tell me the key is already used on another computer.  I don't even have a second computer.  key is thank you!

  would like to know why my windows vista key won't suddenly turn on?  I bought legitimate about 5 years ago.  After formatting my computer, he refuses to re - activate after the episode.  don't ever tell me the key is already used on another computer.  I don't even have a second computer.

  ======================================

  Display of product keys is not allowed in this forum.
  
  See the following link:

  "The things that will get you immediately banned from this forum.
  http://answers.Microsoft.com/en-us/page/FAQ#faqCodeConduct4

  The following links might be worth the trip.

  Windows Vista - fix activation problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-activation-problems

  Vista activation - Frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  (950929) how to contact a Microsoft
  Center of product by phone Activation
  http://support.Microsoft.com/kb/950929

• Activation error: product already in use key

  I changed my HDD may because old hard drive has been courupted he did reverse what it self and ask me to change the hard drive now, I changed the hard drive. It's been more than a year I m using windows vista, but suddenly microsoft request the activation of the product... I did several times but nothing happens again n it asks again for the activation of the product and when I give the activation code it tells me that it is in respect of the use. now, the deadline has passed n my computer restarts with the same product activation window I entered the key, but displays the error code. I also noticed that my computer restarts every one to two hours. I'm very confused m help please thanks...

  You have to manually enable.  This issue of reactivation occurs from time to time (in fact rarely) but there is nothing to worry.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate Vista.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 633: the modem (or other connecting device) is already in use or is not configured correctly. Any solution?

  I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model - HUAWEI EC1262) to connect to the internet.
  I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that "the modem (or other connecting device) is already in use or is not configured properly" and preventing me from accessing Internet.

  I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.

  I did all the options like:
  1 uninstall and reinstall modem drivers
  2. release the COM port and the new port assigng

  We always get but same error. Any solution for this problem would make.

  Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.

  System Restore frequently asked questions.

• Problem: Error 633: the modem (or other connecting device) is already in use or is not configured correctly.

  While I am connected to internet using Reliance Netconnect Huawei 1260, the connection disconnects after 10 to 15 minutes. Shows as connected Netconnect but does not work. I try to disconnect the connection, but it gives an error.

  Reconnect to always remove the modem and then re - login again.

  Please provede me a permanent solution to this. I use Windows 7 Enterprise

  Hello

  1. If it works well before?

  2. what version of Modem drivers do you use? Do you have any other device connected to the computer?

  First of all, I suggest you to check if the modem is compatible with Windows 7.

  Check out the link:

  Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.

  Error 633 indicates that the port is already in use or is not configured for remote access dial out. You may need to check if the VPN and the connection connection try to use the same port that is causing the problem. You may need to check the settings of the modem and change the port for your needs.

  To work around this problem, use one of the following methods:

  Method 1:

  Reserves explicitly the TCP port that is used for the VPN connection. To do this, follow these steps:

  a. click Start, click run, type regedit.exe in the Open box and then click OK.

  b. in the registry editor, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters

  (c) in the Edit menu, point tonewand then click multi-string value.

  d. rename the multi-string value as 'ReservedPorts' and then double-clickReservedPorts.

  e. in the value data box, type1723-1723, and then click OK.

  f. exit the registry editor.

  Registry warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  .

  Method 2:

  Use the netstat command to find the program that is using port 1723. Then, end the process for this program. To do this, follow these steps:

  a. click Start, click run, type cmd.exe in the Open box and then click OK.

  b. at the command prompt, type the following command and press ENTER:

  NETSTAT - aon

  c. in the result which appears, identify the process ID for the program, if any, who is using the TCP port 1723.

  d. at the command prompt, type the following command and press ENTER:taskkill/pid PID/f

  Note: The taskkill command terminates the process that corresponds to the ID of the process. The/F option is used forcefully to complete the process.

  e. at the command prompt, typeexitand press ENTER to quit the command prompt.

  Restart your computer. This may cause the program that uses the TCP 1723 port to use a different port.

  I hope that helps!

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Cannot save edited image. Error message: "the file is already in use or left open.

  I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.

  Thank you!

  Description of the problem:

  Photoshop will not save modified files

  EtreCheck version: 2.1.8 (121)

  Report generated on May 30, 2016 to 19:09:40 PDT

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (27 inch, mid 2011) (data sheet)

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  AMD Radeon HD 6970M - VRAM: 1024 MB

  iMac, 1920 x 1080

  System software: ℹ️

  OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4

  Disc information: ℹ️

  Hitachi HDS722020ALA330 disk0: (2 TB)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5680H

  USB information: ℹ️

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Apple Inc. FaceTime HD camera (built-in)

  Seiko Instruments Inc. SII Smart Label Printer 450

  EPSON EPSON scanner

  Nikon LS-5000 ED

  Seagate FreeAgent 1 TB FW

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  Western Digital my book 1140 3 TB

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Any where

  Kernel Extensions: ℹ️

  / Applications/Toast 8 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.3) [click for support]

  [no charge] com.roxio.TDIXController (1.6) [click for support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]

  / Library/Extensions

  [no charge] com.LogMeIn.hamachi (1.0) [click for support]

  / System/Library/Extensions

  [loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]

  [no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]

  com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  [no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]

  [no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]

  [no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]

  Demons of launch system problem: ℹ️

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.CS4ServiceManager.plist [click to support]

  [no charge] com.avast.secureline.update - agent.plist [click to support]

  [no charge] com.avast.secureline.userinit.plist [click to support]

  [no charge] com.avast.update - agent.plist [click to support]

  [no charge] com.avast.userinit.plist [click to support]

  [operation] com.carbonite.launchd.status.plist [click to support]

  [loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]

  Launch of the demons: ℹ️

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.avast.init.plist [click to support]

  [loading] com.avast.secureline.init.plist [click to support]

  [loading] com.avast.secureline.uninstall.plist [click to support]

  [loading] com.avast.secureline.update.plist [click to support]

  [loading] com.avast.uninstall.plist [click to support]

  [loading] com.avast.update.plist [click to support]

  [operation] com.carbonite.launchd.daemon.plist [click to support]

  [operation] com.carbonite.launchd.monitor.plist [click to support]

  [loading] com.carbonite.launchd.watcher.plist [click to support]

  Elements of user login: ℹ️

  Mail request hidden (/ Applications/Mail.app)

  iTunesHelper UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)

  Screenhero hidden UNKNOWN (missing value)

  Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)

  Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)

  AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)

  Internet Plug-ins: ℹ️

  LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  CoolirisWebKitPlugin: Version: Unknown [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 6.0

  AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The Safari Extensions: ℹ️

  Facebook cleaner

  Latest news

  1 - ClickWeather

  Facebook Photo Zoom

  Unplug

  Ghostery

  Dashlane

  Amazon search discount

  PriceBlink

  WOT

  AdBlock

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  TechTool Protection [click for support]

  Time Machine: ℹ️

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB

  Destinations:

  Feedback Up [Local]

  Total size: 999,86 GB

  Total number of backups: 50

  An older backup: 2016-04-06 19:21:02 + 0000

  Last backup: 2016-05-31 01:28:34 + 0000

  Backup disk size: too small

  Backup size GB 999,86 < (disc 536,90 GB X 3)

  By CPU process back to the top: ℹ️

  100% CarboniteDaemon

  3% WindowServer

  Console 3%

  hidd 1%

  1% adobe Photoshop CS4

  Top of the process of memory: ℹ️

  Com.apple.WebKit.WebContent 696 MB

  541 MB softwareupdated

  Safari 503 MB

  CarboniteDaemon 399 MB

  348 MB mds_stores

  Virtual memory information: ℹ️

  1.59 GB of free RAM

  3.24 GB of RAM active

  6.54 GB RAM idle

  1.51 GB RAM cable

  GB Page-ins 212,57

  Breaks in Page 443 MB

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• How can I get Firefox 9.0.1 to remember form data? (I use Windows XP. Yes, I already looked under tools/options/privacy and don't see anything useful.)

  How can I get Firefox 9.0.1 to remember form data? I use Windows XP. Yes, I already looked under tools/options/privacy and don't see anything useful. I don't see that 'monitoring' and 'bar' on the Privacy tab. The previous version I was using shape data stored without any problem. I can't get 9.0.1 to remind OF THE form data.

  'Re missing you the section history of this window. See the screenshot I posted below.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• FPGA Interface C API, error-63105, OR-RIO: C/C++ identifier is already in use and cannot be created.

  Hello

  Installation program:

  1 x the NI PCIe-7841R

  When I am trying to automatically generate a C++ API for my top FPGA VI using the FPGA Interface C API 12.0 I get the following error.

  Error-63105

  NOR-RIO:

  The "NiFpga_FPGATop_IndicatorBool_DMAFIFOtimeoutoccured" C/C++ identifier is already in use and cannot be created.

  Anyone know what this means? Is there some kind of limitation on the appellation of front interface controls?

  /Mola

  Problem solved.

  I had placed two flags with the same name on the front panel - by mistake. It builds the FPGA without errors, but the C API generator was not in favour of that.

  / Mola

• "Impossible to copy the requested resource is already in use" error message when you try to move the file to the thumb drive.

  I'm going to try really hard to do this makes sense, but I don't know much about computers.  Bear with me.

  Brother gave me a computer.  A graphics Nvidia GeForce 9800 inside.  Because it restored the system settings, the drivers are missing.  Can not connect this computer to the internet.

  So, I went to the nvidia site and downloaded the necessary drivers on my OTHER computer, which is what I'm now on the right.  The download ends, and when I try to move the (drivers) file in the USB, I get this delicious "cannot copy xxxx that the requested resource is already in use".  It is not in use.  I can't even use it on this computer as its pilots for a graphics card that is not yet part of this computer.

  What should I do to make sure I put the file with the drivers on a USB key, on the port to the other computer.

  (by the way, this also occurs with a few random mp3s of the mine.  10 of the 12 tracks on a CD, for example, does copy on the USB no problem, but then two of them to come up with the error message, for no apparent reason.  Don't know if it's relevant)

  Try another USB key. That one is may be damaged or failing. In the meantime, to burn the drivers on a CD - R disc (not CD - RW) to take the target machine. MS - MVP - Elephant Boy computers - don't panic!

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.