Error decoding channel of the Image

Similar Questions

• Script alert: "Sorry I couldn't treat the following files" (Error Message by using the Image Processor)

  I am a seasoned Photoshop/Bridge CS5 user who has recently upgraded to CS6.  In bridge I ran my first batch of Image Processor, trying to convert a set of RAW. NEF files. PSD files with a basic editing action that I created apply them.  Photoshop CS6 opens the bridge files and applies the actions, but then I get the error message "alert of Script" "Sorry, I could not deal with the following files" and a list of all the files in the batch, I tried to run the script on.  The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but will not close unless I close them manually.  I never had this problem in CS5 where would apply the actions that you want to the batch of photos one at a time image processor, then save and close.  Reflections on how I can fix this bug?

  Get your number of history States. I moved mine the default of 20 to 60, and all is well. For the record, this action does not work on 16 and 32 bit.

  Remove resetting of the State history, you will get into trouble if you copy more than one file type. If you go with the change above, I would recommend only with one type of output at a time.

  The script should probably define States of high story then put back to the end. The problem with this, is that machines perhaps isn't able to handle the large amount of stages of history. Which means, hit the stages of history can lead to 'out of memory' or "scratch disk is full" errors.

• channel of the image, obtaining a specific pixel

  I important issue. Suppose that we have a photo with dimensions of 20 x 10 pixels. We treat the image as a matrix .

  
  

  How do I to go to the pixel on the RED channel, with index (5.2)?

  any ideas?
  

  See the routine DissolveRectangle in Dissolve.cpp. It does exactly what you are looking for, but he has no x and the loop is for you. It works on one channel at a time.

• error message "cannot find the image file: $lib/Textures/Fields.png.

  Hi, I work on a PC with windows 7, first cc 2015.4

  Today, I installed red giant universe. Some features did not work and gave me an error that it cannot find al sorts different image files.

  now I try not to use any od red giant plugins and I still get the above message.

  someone has an idea how solve it?

  Contact Red Giant.

• Error "insufficient data for the image.

  Can someone tell me which version of Adobe Reader, I need prevent this error and how to download it. I work for a charity that sends electronic receipts in pdf format and some of our voters can not open them. I heard that there is a bug that has been fixed and downloaded the latest version but still get this message.

  Hello Tara Morley

  Please visit the below links

  TER-updating-to-10-1-4-or-9-5-2/ http://blogs.adobe.com/dmcmahon/2012/08/21/Acrobat-insufficient-Data-for-an-image-error-AF

  http://helpx.Adobe.com/Acrobat/KB/insufficient-data-image.html

  ~ Deepak

• Error: "could not steal the images and find another place and cover these" while trying to create the panoramic view

  Original title: Image Composite Editor

  Why isn't my images being created panaroma style? I downloaded ms direct Photothèque and then my pictures, then clicked on create composites, it is downloaded. then clicked on new panaroma and he gave me a message, it might not steal images and find another place and cover them.

  Hi NormaValdez,
   
  Here is an article that could be useful for:
  Photo Gallery: creating a panoramic point
  
  If this does not help, post your query in Windows Live Photo Gallery Forums for assistance on this issue.

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• How to customize the image verification message shape you?

  On my site there is a section task request and recently my client was recieiving messages from people demands that they don't recieivng an error message when you their application.

  I guess that the problem is that they are not to enter the CAPTCHA correctly, that leads to a page that says:

  "ERROR: an error has occurred." The image verification failed. If you believe it is incorrect, please contact your system administrator or go back and re - submit the form. »

  After seeing this message they simply press the back button to return to the application page, but the CAPTCHA has not changed because the page does not reload correctly and so they re-enter the CAPTCHA and are sent once more to the error page.

  I just want to add a link to the Job Listing page, or could make a copy on the error page that says back not just to hit, but to reload the page.
  

  There is a section for the Captcha in the admin of the site under Site settings... Make sure that it is checked for the form that you use?

• Couldn't able to reduce the size of the image while storing in the report

  Hi friends,
  
  Im trying to save the image in my table, so that these are the steps that I follow...
  
  First, I created a table:
  

  CREATE TABLE "A_IMAGES"
  (
  "IMAGE_ID" NUMBER(10,0) NOT NULL ENABLE,
  "FILE_NAME" VARCHAR2(4000) NOT NULL ENABLE,
  "BLOB_CONTENT" BLOB,
  "MIME_TYPE" VARCHAR2(4000),
  CONSTRAINT "A_IMAGES_PK" PRIMARY KEY ("IMAGE_ID") ENABLE
  )

  After this sequence, relaxation and the procedure,.
  
  Let me show you the procedure
  

  create or replace PROCEDURE "DISPLAY_IMAGE"
  (
  inID NUMBER
  )
  AS
  vMIME VARCHAR2(48);
  vLENGTH NUMBER;
  vFILENAME VARCHAR2(2000);
  vBLOB BLOB;
  BEGIN
  SELECT MIME_TYPE, BLOB_CONTENT, FILE_NAME, DBMS_LOB.GETLENGTH(BLOB_CONTENT)
  INTO vMIME, vBLOB, vFILENAME, vLENGTH
  FROM A_IMAGES
  WHERE IMAGE_ID = inID;
  owa_util.mime_header(nvl(vMIME, 'application/octet'), FALSE);
  htp.p('Content-length: ' || vLENGTH);
  owa_util.http_header_close;
  wpg_docload.download_file(vBLOB);
  END;

  Everything worked fine, but the following error occurs when im trying to insert an image into a table with a browse button.
  

  ORA-06502: PL/SQL: digital or value error: character of number conversion error

  The error above if I include the following line in the source code of my region report...
  

  ' < img src = "#OWNER #." DISPLAY_IMAGE? inID =' | NVL (IMAGE_ID, 0) | "" height = "50" width = "50" / > "IMAGE

  mainly, I added the above line in my source region only query for the image (size setting)...
  
  If I give the report source region coding as the means below, it works like a charm
  :)
  

  SELECT FILE_NAME,IMAGE_ID,
  dbms_lob.getlength("BLOB_CONTENT") "IMAGE" 
  FROM A_IMAGES
  ORDER BY FILE_NAME

  But what is the problem with the above code means, as he worked successfully and I can also see the images in the report, but each image is looking too big...
  
  In order to reduce the size of the image that I gave this line,
  

  ' < img src = "#OWNER #." DISPLAY_IMAGE? inID =' | NVL (IMAGE_ID, 0) | "'" height = "50" width = "50" / > ' IMAGE

  but if I gave ways online, error is occurring as the image does not store in a size appropriate for the table...
  
  But there, I noticed one thing,
  
  dbms_lob.getlength ("BLOB_CONTENT") 'IMAGE' is normally in a type of NUMBER , and it works very well...
  
  But instead of dbms_lob.getlength("BLOB_CONTENT") 'IMAGE', if I replaced it with *' < img src = "#OWNER #." DISPLAY_IMAGE? inID =' | NVL (IMAGE_ID, 0) | ' ' ' height = '50' * width = "50" / > ' IMAGE means, it is converted to a string...
  
  I think mainly for that alone, it's show error...
  
  How to rectify this problem friends...
  
  I also downloaded this app in my sample workspace,
  
  Please check with this application
  
  application name: region 50787-new report and here is the link http://apex.oracle.com/pls/apex
  
  WS: Mini_WS
  United Nations: [email protected]
  PWD: mini4i
  
  Thanks in advance
  
  Kind regards
  Mini

  I created a new page 3 which shows how to use the CSS (in the header HTML page) to control the scaling of the images displayed in the reports using BLOB support declarative.

  However, you really need to use generated thumbnails to the right size instead of scaling of the images in the browser. If the images used in your demo are for guidance, so they are waaayyyy too big to use in this scenario. This just kill performance on your web server and database and unnecessarily consume massive amounts of band network bandwidth. Your DBA, system administrators, ISPS and users will be very unhappy.

• move a channel? replace the channel of the color by another way?

  -actually a double question, two closely related themes. In an RGB image, I have to move all the pixels of a channel (as I suggest a whole layer) using the move tool (selection of the channel in the channel Panel). Which is impossible. (First two questions: why this is impossible and how I make it possible?). And as a solution, I thought that I could duplicate the channel, move its contents (which is possible) and use it to replace the original (call a new one as the old one, of course). But no! Cannot do it either. If I do, instead of the RGB channels, red, green, blue, red copy, I get, Magenta, yellow, red. I don't really understand, and can't find anything about it.

  I would be grateful for any source or the same explanation.

  You should be able to move channels if the image is flattened.

  Even without flattening the image, you should be able to copy and paste

  a duplicate or new channel to an existing channel.

  MTSTUNER

• import the image of the computer

  I would like to know how to import existing report page image.
  
  Thank you

  Hello

  OK - first of all, your table is called A_IMAGES?

  Secondly, on your processes, you have the following settings:

  Type: PL/SQL anonymous block
  Point process: submit now - after Computatons and Validations
  Condition type:-select the Condition Type.
  Expression 1: (empty)
  Expression 2: (empty)
  When you press the button: P2_UPLOAD_BUTTON (or whatever your button is called)
  Authorisation scheme:-no Auhorization not Required.
  Successful process message: downloaded Image (or whatever the message you want)
  The error message: ERROR: could not download the image for some reason any! (or whatever the message you want)

  Your download point called P2_FILE?

  And, you have an unconditional branch on the page or, perhaps, a branch that she also triggered by the P2_UPLOAD_BUTTON?

  Andy

• Error decoder IMAQdx configure enter with the Mono10 Pixel Format

  Hello

  I recently encountered the following problem, so I'm trying to capture images across an iPort CL - U3 Pleora USB3 vision.

  "Error 1074360265 occurred at IMAQdx configure Acquisition.vi.

  Possible reasons:

  NOR-IMAQdx: (Hex 0xBFF69037) no decoder available for the pixel format selected. »

  I always get this error when I switch the 'Pixel Format' to 'Mono10 '. In my images, I use 'Type of Image' 'levels of gray (I16).

  My test code works very well for 'Pixel Format' "Mono8" but not others.

  It is also important to note that in MAX, with 'Levels of gray (I16)' and 'Mono10', it works fine as well.

  Any help will be appreciated.

  Thank you

  Harry

  Have you changed the type of image requested the default value of 'Auto' to 'Gray levels (I16)' at some point? If you have changed this setting in MAX, and recorded, which would explain the error you see. Your code is only to change the pixel format, and there is no decoder available inside the IMAQdx which takes a Mono8 image and returns an image I16 (you would have to project the image with screws of the Vision).

• Hallo why? When I update ios. When the image has finished error itunes and usb

  Hallo why? When I update ios. When the image has finished error itunes and usb

  Connect the iPhone to the computer that you are synchronizing usually with

  and follow the prompts to iTunes on this computer. If you

  do not generally in sync with a computer, you should always use

  iTunes on a computer to complete the update.

• How can I fix the image of the error and get the regular image to load?

  Since the recent big update for Firefox I get a sort of error of loading of some images.
  Here: http://tinypic.com/r/103bf3l/8 I put one of these sites that give this error
  -The original which is supposed to show image is also available in this image
  Some sites give a different size of this image of the error, but it seems more like a triangle of error

  I've tried troubleshooting not loading images and none of these options worked
  If anyone has this problem or knows how to solve this problem, it would be a great help

  Solution found:
  With the theme "Stylish" addon "Google two themes" interfered with the loading of the image of the sites. Disable the theme was the solution.

• The image cannot be displayed because it contains errors.

  I use Firefox ESR 24.5.0 on Red Hat Enterprise Linux with GNOME 2.28.2 6.3.

  It gives me this error when I try to view this image http://graphbench.org/images/hairball-header-cropped.jpg

  It's only 1170 x 311 and 81.1 KB, so size shouldn't be a problem. When I ctrl-s to save the image, it opens fine in GIMP, eye of GNOME 2.28.2 Viewer and 2.10.11 gThumb image viewer. Open the image in Firefox to my hard drive breaks down with the same error. I have not installed extensions and it fails even in safe mode. The image load correctly in Firefox on another computer (Windows) on the same network.

  I shift-updated to reload the image and it does not help. I have firefox yum uninstalled, deleted my folder .mozilla and firefox yum installed again but the problem remains. I went in: config and there is no "BOLD" network.http prefs. *. The permissions for the domain are not restricted. I went to "tools > Page Info > Media ' and the image has not been blocked. Permissions.default.image has by default. I have "Allow pages to choose their own colors, instead of my selections above". When you load this page http://graphbench.org/ I get this error in the web console "[13:44:33.313] Image damaged or truncated: http://graphbench.org/images/hairball-header-cropped.jpg @ http://graphbench.org/images/hairball-header-cropped.jpg" four other images is not on this page: images/nelson.jpg images/myers.jpg images/ceze.jpg and images/kahan.jpg. "»

  Bugefun wrote:

  I'm using Firefox ESR 24.5.0
  

  You can try the latest version? If ESR picked up a bug of Firefox 24, he'll never fixed (except when ESR goes to Firefox 31, in other words).

  Bugefun wrote:

  It gives me that error when I try to view this image http://graphbench.org/images/hairball-header-cropped.jpg
  

  No problem here in Firefox 29,0 in Linux Mint.