Get local and global variables using API

Similar Questions

• APEX 4.2 translate data 'function and Global Variable declaration '.

  Hello everyone,
  
  I use APEX 4.2.1.00.08 and I wonder if there is a way to translate "Function and Global Variable declaration" textarea. Any other script text box is available for translation, but not this one.
  I know what the code is loaded on the header, but may contain important alert messages of global functions.
  
  Thanks in advance.

  Hi Grandmaster,

  "Function and global variables declaration" contains the JavaScript code, that is why it is not wise to include in the standard translation process.

  In my opinion, you have several options to access your translated messages:

  -) Use Application-> Substitutions or
  -) Store your message in the form of component shared-> SMS and and assign it to an application with the APEX_LANG element. Api MESSAGE (http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_lang.htm#CHDBCEAB)

  In 'Function and Global Variable declaration' use substitution syntax to replace the value. For example:

  var myDeleteMessage = "&G_MY_DELETE_MESSAGE.";
  ...
  alert(myDeleteMessage);
  

  where G_MY_DELETE_MESSAGE would be a part of the application or the request for Substitution.

  Concerning
  Patrick
  -----------
  Member of the APEX development team
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Concepts behind them were leaving local and global

  
  Hello

  I'm not quite sure you understand the difference between local and global scores.

  Can someone explain to me - in easy words - what is the difference between local and global scores?

  Why should I use one rather than another.

  Thank you and best regards.

  I create a table and partition on SALE_DATE.

  I create an Index on it and set it as 'LOCAL '.  It becomes Equi-partitioned as a partitioned local Index.  Each Table of Partition is a Partition of the corresponding Index.

  I create another index and partition on CUSTOMER_ID.  It is partitioned on a different key of the table.  This is a partitioned Index.

  I create another index on PRODUCT_ID without no partitioning.  It is an overall index.

  Hemant K Collette

• DLL and global variables

  OK, here's a strange problem.  I am very new to create the dll, so I don't know that I have just an installation problem.

  But I'm trying to pass a global variable of a host program to its attached DLL.  I got this job when I was the CVI 2014. I recently upgraded to 2015 and then started getting "undefined symbols" errors.  With some struggle I managed to compile again, but broke the variable connection in the process.

  I have compiled my DLL in debug mode so that I walk in from the test project.  Right now, my global variable exists in the test project, as well as in the DLL.

  Can I export the variable and the use of DLLIMPORT/DLLEXPORT?  Confused and curiously not to find anyone quite like this on the forums.

  EDIT: this post stack overflow described pretty well from my experience.  I am linking statically.

  Well, what do you know?  I found my problem.  This draft article and example WERE vital to the solution.  This article called, "using the Export method qualifier"was also useful.  I'll cut to the Chase...

  If you use a qualifier of export on the definition and the import on the declaration, LabWindows/CVI identifier export symbol.

  This is the right key.

  So in my example, it should look like this:

  DLL fichier.c

  int DLLEXPORT varName = 0;

  Header.h DLL

  int DLLIMPORT varName;

  Project that uses DLL.c

  #include "header.h DLL.
  
  varName! = 1 ;  a method to change this variable for local use

  Pretty easy, huh?  But wow, it took some time to find.

• How to configure the local and logging remotely using the host profiles, not with advance options

  Help, please

  Hello

  Local and remote syslog feature can be configured for a cluster of similar hosts using the host profiles.

  For more information, see guide installation and Set Up Syslog of the section of the Interface of host profiles in vSphere Installation.

  Connect the Server vCenter by using the vSphere Client.

  Click home.

  Under the administration section, click host profiles.

  Create a new profile or modify an existing profile.

  In the Edit Profile dialog box, set one or more of the five configuration options.

  If you configured using esxcli or advanced syslog configuration options and this has captured a host of reference, 5 configuration options are already visible in the Advanced Configuration option section.

  If syslog has not been previously configured, right-click the section of Advanced Configuration options and add a profile for each of the five configuration options.

  Save the profile and assign it to the hosts.

  For more information please see the documentation Center: (Documentation Centre of vSphere 5.5 )

• Local and Global filter

  Hello
  
  What to say by a global and local filter filter, global and local guest quick to OBIEE
  
  
  Please urgent.
  
  
  Thank you
  JEL

  Global vs Local filter filter:
  global filters are also called saved filters, it can be applied to several reports.

  step 1: go criteria in responses create a filter using Add option filter in any column.
  step 2: save the filter in any shared folders.we can apply this filter to any report containing this particular column.we can select filter recorded in option to filter the left pane.

  If a report contains several blocks as table and chart, you can apply a filter that filters the data of table and chart. It is not only for the two blocks. You can apply a filter to a number n of blocks. This filter is called global filter. Local is a normal filter that can be applied generally on one block.

  Guest of dashboard:

  Guest of dashboard is a special type of filter that filters of query that are integrated with the dashboard.

  Step 1: In Oracle BI answers select new dashboard button in this upscale neighborhood of topic.
  Step 2: Select the scope of the dashboard, if we choose the scope as a page then guest will filter does not show in a particular page.scope is the dashboard then it will filter all reports that are present in this dashboard.
  operator and in step 3, select column
  step 4: select control and constraints
  step 5:set default and set the variables of the presentation if necessary.
  step 6: create labels
  Guest of 7:save stage

  Two types of guests from dashboard:
  Table of edge/Page

  Dashboard: this will get all dashboards
  Page: this will get a particular page only.

• Local and Global Index confusion...

  Hi all

  Oracle Database 10 g Enterprise Edition Release 10.2.0.3.0 - 64 bit

  I have a partitioned table, when developing the application, they have committed an index ON this table. Previously, whenever we use to run 'Alter Table add partition..' global index becomes unusable and I used to rebuild the same. But in recent months, each time we add partition (Alter Table... ADD Partition..) on this table, index will get unusable to stat instead it shows that indexes THE data dictionaries (Lacality = Local in USER_PART_INDEXES). Partitioned indexes are also automatically created with each table partition creation.

  But the query below shows the output indexes are GLOBAL.

  Select double dbms_metadata.get_ddl('INDEX','ABCD','USER_A');

  Can someone me help on what actually happened here.

  But the example above has the keyword LOCAL?

  CREATING INDEX 'SEB '. "" CDRV_I1 ""SEBS ". "" CDRV ' ('CDRV_CURNT_FL', 'IND_LAST_VERSN', 'GMT_SEIZ_DT_TIME', 'CLECT_ZONE', 'CALL_ID',

  "SWTCH_ADMIN_ABBR")

  PCTFREE, INITRANS 10 2 MAXTRANS 255 LOGGING

  STORAGE (INITIAL 10485760 NEXT 10485760 MINEXTENTS 2 MAXEXTENTS 2147483645)

  PCTINCREASE 0 DEFAULT USER_TABLES)

  "SEBS_CDRV_TAB" of LOCAL TABLESPACE

  (PARTITION "CDRV_HISTORIC"

  PCTFREE, INITRANS 10 2 MAXTRANS 255

  STORAGE (INITIAL 10485760 NEXT 10485760 MINEXTENTS 2 MAXEXTENTS 2147483645)

  PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)

  TABLESPACE "SEBS_CDRV_TAB."

  If it looks like a duck and quacks like a duck, it is very probably a duck (or the local index)

  See you soon

  Richard Foote

  http://richardfoote.WordPress.com/

• problem with the type of local and global

  Hi the gems...
  
  I have a plsql package. In the package, I defined a proc that takes two input parameters of type simple number and a parameter of a type of output collection.
  
  create or replace package pack_1 as body
  procedure proc_1 (p_number1 in number, p_number2 number, p_tt_table to tt_table) as
  v_tt_table tt_table:=tt_table();
  type c_ref_cursor is ref_cursor;
  v_c_ref_cursor c_ref_cursor;
  v_sql varchar2 (20000): = < a large sql using bind variables p_number1 and p_number2 >
  
  Start
  Open the v_c_ref_cursor for v_sql using p_number1, p_number2;
  loop
  extract the v_c_ref_cursor in v_tt_table;
  When the output v_tt_table.count = 0;
  for idx in 1.v_tt_table.count
  loop
  < business logic >
  end of loop
  end loop;
  close v_c_ref_cursor;
  < excpetion_block >;
  end;
  
  < several codes for the rest of the package >
  
  
  
  When I execute the proc_1 then he throws me error of data type incosistent while to fetch the v_c_ref_cursor of cursor in the v_tt_table variable.
  ORA-00932: inconsistent data types: expected - was -.
  But I have checked that the output of the query is similar with the type of variable.
  
  Now, a few facts: the tt_table of the user-defined table type is made from ot_table (create or replace tt_table to ot_table Board).
  The parent type i.e. ot_table has the same columns of this query in v_sql my proc.
  The ot_table and the tt_table are global types.
  
  But when I did these two types as local types, then the proc works very well. But I need them as global types only according to the condition in java.
  
  Please help me. The database is 11 GR 2.
  
  Thanks in advance.

  user12780416 wrote:

  I'm trying to keep it in the simplest form... Please take a look...

  Ah... Easy to solve.

  The projection of SQL must be an object of type ot_test_type for extraction in bulk work.

  Your projection of SQL look like this:
  cursor c1 is select object_name from user_objects;

  object_name is a string - it is not of type ot_test_type.

  You must change the projection to return ot_test_type. This is done by using the default constructor for that type of object.

  For example
  cursor c1 is ot_test_type (object_name) select as the user_objects OBJECT;

  He may now be in bulk recovered in tt_test_type.

• OIM 11 g: how to get a remote database connection using API

  Is there a way to get a remote java.sql.Connection IOM with the OIM 11 g API Base?
  
  I know that during the execution of code on the server, you can use...
  
  Platform.getOperationalDS () .getConnection ();
  
  .. .and remotely using OIMClient...
  
  XLClientSecurityAssociation.setClientHandle (oimClient);
  tcDataProvider db = new tcDataBaseClient();
  
  .. .but I would get a java.sql.Connection (instead of tcDataProvider).
  
  Any suggestions?
  
  Thank you.

  waynec wrote:
  Is there a way to get a remote java.sql.Connection IOM with the OIM 11 g API Base?

  I know that during the execution of code on the server, you can use...

  Platform.getOperationalDS () .getConnection ();

  .. .and remotely using OIMClient...

  XLClientSecurityAssociation.setClientHandle (oimClient);
  tcDataProvider db = new tcDataBaseClient();

  .. .but I would get a java.sql.Connection (instead of tcDataProvider).

  Any suggestions?

  Thank you.

  All the remote APIs of the IOM are EJB3 services. A set of Java classes and Spring beans configuration is provided for each class of service. So, in order to have access to JDBC database, you will need to create a framework for EJB3, providing access to remotely all the data structures and methods, which of course is a rather difficult task.

• Lessons on the looping and global variables in functions

  I'm trying to gather a complete inventory of virtual machines and hosts in my environment.  For VMS, I am train to collect the information below but problem a loop in the case of hard drives and network cards.  For example, on hard drives, I get the following result:

  VMNIC1: Network card 1
  NICMAC1: 00:50:56:87:01:e6
  NICNetwork1: dvPortGroup6666

  NICState1: Logged, GuestControl, StartConnected
  HDName1: hard drive 2
  StorageFormat1: thin
  HDCapacityGB1: 100
  Datastore1: [RXCXN00020] host108a/host108a_1.vmdk

  As you can see, only the last instance of the disc is saved in my outings.  In other words, HDNamex is never incremented but the value (here "drive 2") always represents the last disk that is, this virtual machine has two disks.  I have a few virtual methods with five disks and, in this case, there HDName 1 to a value of hard drive 5.  How properly I loop through each instance of my hard drives?

  A key part of my information on Virtual Machines is the Cluster they are on.  This value, however, is only available by attribute parent of the host object.  Therefore, I created a hash table to try to do that research, but it seems that the hash table is lost outside the function Get-HostInfo.  Note the Get-VMInfo function tries to access the values in this Hashtable with the following result:

  Cannot perform indexing in a null table.
  D:\scripts\VMInventory.ps1:36 tank: 82
  + $VMStuff | Add-Member-type noteproperty-name HostCluster-value $HostHashTa
  wheat [< < < < $VMStuff.Host]
  + CategoryInfo: InvalidOperation: (host012.domain.com:VMHostIm
  [of] pl), RuntimeException
  + FullyQualifiedErrorId: NullArray

  Looks like I need to be "global" and not just its function, this hash table.  Any help of any of these two issues would be greatly appreciated.  Here is my code:

  Function Get-HostInfo {}
  Begin {}
  {In process
  $HostStuff = new-object psobject
  $HostHashTable = @ {}

  $HostStuff | Add-Member-type noteproperty-name HostName-value $_
  $HostStuff | Add-Member-type noteproperty - name PowerState-value of $_. PowerState
  $HostStuff | Add-Member-type noteproperty-name CPUQty-value of $_. NumCpu
  $HostStuff | Add-Member-type noteproperty-name of generation - value $_. Build
  $HostStuff | Version-value add-Member-type noteproperty-name $_. Version
  $HostStuff | Add-Member-type noteproperty-name manufacturer-value of $_. Manufacturer
  $HostStuff | Add-Member-type noteproperty-name MemoryTotalGB-value of $_. MemoryTotalGB
  $HostStuff | Add-Member-type noteproperty-model name - value of $_. Model
  $HostStuff | Add-Member-type noteproperty-name NetworkInfo-value of $_.NetworkInfo
  $HostStuff | Add-Member-type noteproperty-name of Cluster - value of $_. Parent
  $HostStuff | Add-Member-type noteproperty-storage of value-name $_. StorageInfo

  $HostHashTable [$HostStuff.HostName] = $HostStuff.Parent

  write-output $HostStuff
  }
  {End}
  }

  Function Get-VMInfo {}
  Begin {}
  {In process
  $VMStuff = new-object psobject
  $VMHashTable = @ {}

  $VMStuff | Add-Member-type noteproperty - name VMName-value $_
  $VMStuff | Add-Member-type noteproperty-name Mnmemonic-value of $_. Folder
  $VMStuff | Add-Member-type noteproperty-name of the host - value $_. Host
  #Link the virtual machine to its location of cluster
  $VMStuff | Add-Member-type noteproperty-name HostCluster-$HostHashTable [$VMStuff.Host value]
  $VMStuff | Add-Member-type noteproperty - name PowerState-value of $_. PowerState
  $VMStuff | Add-Member-type noteproperty-name ProvisionedSpaceGB-value of $_. ProvisionedSpaceGB
  $VMStuff | Add-Member-type noteproperty-name UsedSpace-value of $_. UsedSpaceGB
  $VMStuff | Version-value add-Member-type noteproperty-name $_. Version
  #Get information about the adapter on each instance
  $AdapterInfo = get-NetworkAdapter $_
  {foreach ($Adapter to $AdapterInfo)
  $j = 1
  $VMStuff | Add-Member-type noteproperty-name VMNIC$ j-$Adapter.Name value
  $VMStuff | Add-Member-type noteproperty-name NICMAC$ j-$Adapter.MACAddress value
  $VMStuff | Add-Member-type noteproperty-name NICNetwork$ j-$Adapter.NetworkName value
  $VMStuff | Add-Member-type noteproperty-name NICState$ j-$Adapter.ConnectionState value
  $j ++
  } adapter #end foreach loop
  Information disk hard #Get for each instance
  $HardDisks = hard disk get $_
  {foreach ($HD in $Harddisks)
  $i = 1
  $VMStuff | Add-Member-type noteproperty-name HDName$ I have $HD value. Name - force
  $VMStuff | Add-Member-type noteproperty-name StorageFormat$ I have $HD value. StorageFormat-force
  $VMStuff | Add-Member-type noteproperty-name HDCapacityGB$ I have $HD value. CapacityGB-force
  $VMStuff | Add-Member-type noteproperty-name data store $ I have $HD value. Filename-force
  $i ++
  } foreach #end HD loop
  #Select the windows machines for obtaining information from WMI
  If ($_ - like "w *") {}
  $OSinfo = get-WmiObject-class Win32_OperatingSystem - computer $_
  $VMStuff | Add-Member-type noteproperty-name OSSerialNumber-$OSinfo.SerialNumber value
  $VMStuff | Add-Member-type noteproperty - name OSVersion-value $OSinfo.Version
  $VMStuff | Add-Member-type noteproperty-name OSVServicePack-$OSinfo.ServicePackMajorVersion value
  $VMStuff | Add-Member-type noteproperty-name OSCaption-$OSinfo.Caption value
  $VMStuff | Add-Member-type noteproperty-name OSInstallDate-$OSinfo.InstallDate value
  $VMStuff.OSInstallDate = ([WMI] "). ConvertToDateTime (($OSInfo). InstallDate). ToString ("yyyy-MM-DD hh: mm :") ")
  $VMStuff | Add-Member-type noteproperty-name OSLastBoot-$OSinfo.LastBootupTime value
  $VMStuff.OSLastBoot = ([WMI] "). ConvertToDateTime (($OSInfo). LastBootUpTime). ToString ("yyyy-MM-DD hh: mm :") ")
  $ComputerInfo = get-WmiObject-class Win32_ComputerSystem - computer $_
  $VMStuff | Add-Member-type noteproperty-name OSSystemType-$ComputerInfo.SystemType value
  IP #Get each adapter information
  $OSNICArray = @)
  $OSNICrecord = get-wmiobject Win32_NetworkAdapterConfiguration - filter IPEnabled = TRUE - computer $_. Select legend, IPAddress,: IPSubnet, DefaultIPGateway, DNSDomainSUffixSearchOrder and DNSServerSearchOrder
  $OSNICArray += $OSNICrecord
  {foreach ($LAN to $OSNICArray)
  $VMStuff | Add-Member-type noteproperty-name OSAdapterName-value $LAN. Legend
  $VMStuff | Add-Member-type noteproperty-name OSIPAddress-value $LAN. IPAddress
  $VMStuff | Add-Member-type noteproperty-name OSIPSubnet-value $LAN. : IPSubnet
  $VMStuff | Add-Member-type noteproperty-name OSGateway-value $LAN. DefaultIPGateway
  $VMStuff | Add-Member-type noteproperty-name OSDNSSearchOrder-value $LAN. DNSServerSearchOrder
  $VMStuff | Add-Member-type noteproperty-name OSDNSSuffix-$LAN.dnsdomainsuffixsearchorder value
  } foreach LAN #end loop
  } #end if

  $VMHashTable [$VMStuff.VMName] = $VMStuff.Host

  write-output $VMStuff
  }
  {End}

  }
  #Specify location to search
  $Location = 'My Place'
  SE connect-VIServer 'VIServer1 '.

  #Gather the host information
  $HostatSite = get-vmhost-location $Location
  $HostatSite | Get-Hostinfo
  #$HostatSite | Get-Hostinfo | export-csv "d:\scripts\server-report\'$Location'-HostReport.csv".

  #Gather VM information
  $VMatSite = get-vm-location $Location
  #$VMatSite | Get-VMInfo | export csv d:\scripts\server-report\$Location-VMReport.csv - NoTypeInformation
  #$VMatSite | Get-VMInfo | ConvertTo-Html | Set-Content d:\scripts\server-report\$Location-VMReport.htm
  $VMatSite | Get-VMInfo

  The problem is that the Export-CSV cmdlet examines the properties of the first record it only reads and displays the properties for all the records. You can leave the script write a dummy record as the first album with all the columns that are possible. That will solve this problem.

• partation local and global index

  Hello
  
  I want partation tables in my database.
  Can someone tell me what exactly the difference between the local index & glabal.
  is there any link which can give me more informetion about the same.
  
  Thank you

  Local index is the index that is created on the partition key column name.

  Hi Anand

  Just to be clear, that a local index must not necessarily be created on partitioned key column, it is simply automatically partitioned in the same way as the underscore.

  If it contains effectively partitioned key columns is completely optional.

  See you soon

  Richard Foote
  http://richardfoote.WordPress.com/

• Using global variables in a device custom

  Hello world

  I have problems with the passing of data through my device customized using global variables. I want to allow a user to select a RIO device address when you set up the system definition file. This is recorded in a global variable using the hand Page VI. I would later use this RIO device address in RT driver to deploy a bitfile. I can hard-code, but it is much more convenient to use a global.

  When I try to store the address of the global variable, it updates the value temporarily (I confirmed that the structure of the event recognizes the change of value). When I click the node of the tree to define system linked to the Main Page VI and then click on it again, the hand Page VI runs again. I wrote the code to repopulate the address of device of RIO with the last value stored in the global variable, but it is empty. I've included the VI global variables in my build, so I can't imagine why it can reset this value.

  Any help would be appreciated!

  Thank you

  Mitch

  Have you tried to use the custom device properties to store this value instead of GVs?

  Configuration VI, you can set this property, and if I'm not mistaken, you can read these properties on the RT driver.

• understand the concept of global variables

  Hi guys,.

  I just have a small question...

  I discovered that my main program uses global variables 855.

  It was not built by me.

  I hope that if you guys done with this before?

  What do you think this is a good approach for me.

  Find ways to get rid of all the global variables using cluster?

  or leave it like that because his work and don't borther with her.

  or is there another solution?

  Thanks in advance

  If I were you I just whine a little and then conform to the architecture, that I inherited.

• global variable of void vs variable

  Hi guru; s,

  I'm not able to find a lot about global variables.

  What is the difference between the variable substitution and global variable?  Why do we have local variable in planning?

  Thanks, RN.

  Essbase uses variables to override global and local variables (application).  The choice is yours.  Global substitution variables can be used by applications and are easy to change because there are once - a single variable that is accessible to all.  Local variables are not accessible to all and generally apply only to a specific application.

  A good example of a global variable would be curmonth.  In this case, a current month would apply to all applications.  An example of a local variable can be

  a value is assigned specifically to a single application, for example the amount of stores for one of the special database NYStores or London.

  I think that BR used limited global and local scope variables.

• Global variables or shared unique process variables?

  Normal
  0
  21

  fake
  fake
  fake

  MicrosoftInternetExplorer4

  / * Style definitions * /.
  table. MsoNormalTable
  {mso-style-name: "Table Normal";}
  MSO-knew-rowband-size: 0;
  MSO-knew-colband-size: 0;
  MSO-style - noshow:yes;
  "mso-style-parent:" ";" "
  MSO-padding-alt: 0 cm 0 cm 5.4pt 5.4pt;
  MSO-para-margin: 0 cm;
  MSO-para-margin-bottom: .0001pt;
  MSO-pagination: widow-orphan;
  do-size: 10.0pt;
  do-family: "Times New Roman";
  MSO-ansi-language: #0400;
  mso-fareast-language: #0400;
  mso-bidi-language: #0400 ;}

  Given that the
  introduction of shared variables, whenever I needed a global variable, I have
  use shared unique process variables. But I started now return to
  using the old global variable because I think that there are some significant drawbacks
  to the single shared variable. Here is the ability to search for
  case of variables and also the ability to view or change the value of
  the variable (OK, we have the variable Manager, but I found slow and)
  unstable). My question is, are there reasons to use the new single
  process variable actions on old global variables?

  Dear Terje,

  As you use only the variables on a single system. There is no advantage to the use of unique process shared on Globals variables.

  Infact a global variable uses a little less processing power that a global variable as the implementation of a shared variable single-pocess effect is a global variable with the timestamp feature.
  If you use a shared variable single process, if you don't need the timestamp feature, then disable it to use less processing power.