error disk or disk nonsystem HP probook 4510 s (windows vista)
Hello world! my hp laptop (hp probook 4510 s) will not start. It displays error disk or non-system disk. (I use windows vista).
How can I solve this problem? Thanks in advance for your help.
Hello
See if that helps you.
"HP Notebook PC - hardware failures (Windows 7, Vista) screening.
http://support.HP.com/au-en/document/c01443317
See you soon.
Tags: Windows
Similar Questions
-
disable disk automatic check at startup in Windows Vista
How can I disable disk automatic check at startup of windows vista?
Hi HowardGarlinger,
Thanks for posting in the Microsoft Community.
He would be grateful if you can answer these questions to help you further.
1. you have to make the full scan?
2 did you a recent software or hardware changes to the system?
3. are you able to start the fine of office?
Let us try the following steps to disable automatic checking.
Method 1:
You can try the steps to disable the autochecking.
a. Click Start, and then type regedit in the box start the search.
b. right-click regedit.exe , and then click "run as administrator".
c. develop the '+' for the following keys.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager
d. There is a value called here BootExecute. If bmssldr is listed in the data section and then remove it.
Otherwise follow these steps, the default value of the key is autocheck autochk *, * means every drive is checked for consistency.
e. just add /K:C at the end before *. /K switch will disable autocheck on C: drive at Windows startup. If the final value should look like this:
autocheck autochk / k: C
> If you want to add more drives, the key should look like this: (by disabling the drives C and D)
/ k: D / k: C autocheck autochk *.
> If you want to restore all default, just replace the key with the default i.e.
autocheck autochk *.
Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information, see the article:
Method 2:
If the problem persists, try running a disk of Windows receovery environment check.
Try running the disk drive check WinRE using the full version of Windows Vista disk and check if it helps.
a. Insert the installation disc.
b. restart your computer.
c. When you are prompted, press any key to start Windows from the installation disc.
Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
d. Choose your language settingsand then click Next.
e. in the System Recovery Options menu, click command prompt
f. at the command prompt, type the following command and press ENTER.
chkdsk /f /r X: (drive letter)
Note: when you run the disk check, there is a risk of data loss you can take a backup before starting the checkdisk.
g. press y when you are prompted to check the drive the next time the system restarts.
If you need further assistance, please answer and we will be happy to help you.
-
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
This message is pop:
Microsoft Visual C++ Runtime library
Runtime error!
Program c:\windows\helppane.exe
R6034
A request made an attempt to load the wrong C runtime library
Please contact the support team of the application for more details
This message appears as soon as the machine restarts
Happens if I try to run Skype
There is no problems until the updates have been installed
This problem is urgent that this computer is used for a company
Thank you
David SchlachterHello
In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=enMicrosoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=enThen uninstall and reinstall the software Skype and check.
I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?
sweetcheeks,
0x80072EE2 ERROR_INTERNET_TIMEOUT http://support.microsoft.com/kb/836941/en-us
-
How to apply the APPCRASH solution (disk cleanup manager doesn't work/windows vista)
Signature of the problem
Additional information about the problem
Hello1. when exactly you get the error message (while throwing or perform a disk cleanup)?2 have you made any changes to the computer, before the show?Method 1:Perform a clean boot and check.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7Note: once you have determined the issue of cause using the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.Method 2:An analysis of auditor of system files on your computer.How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7Method 3:An analysis of antivirus on your computer and check.Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.Important: When running if bad sectors are found and if she attempts to repair this sector of scan on the hard drive, all available on which data can be lost. -
Vista
DefragmenterHi Augie,
Welcome to the Microsoft Answers site!
1. you run defrag disk for the first time?
Disk Defragmenter is a tool that rearranges the data on your hard drive and brings together fragmented files so that your computer can run more efficiently. We must keep in mind that the Disk Defragmenter uses disk access low priority and processor so that it is not influence your current running programs. This automatically translates a slower process. Disk defragmentation can take a long time if you run it for the first time and also depend on the space of hard disk and available data. If may take up to 15-16 hours, depending on the data and the bad clusters on the hard drive.
Try the suggested methods.
Method 1
If you want to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
Method 2
You can run a disk scan command to remove bad sectors on the hard drive, then run Disk Defragmenter.
1. open the computer by clicking the Start button, click computer.
2. right click on the hard drive you want to check, and then click Properties.
3. click on the sur l' onglet tab Tools and then, under error-checking, click check now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
To automatically repair problems with files and folders that detects the scanning, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.
To perform a full disk check, select search for and attempt recovery of bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.
To check for errors file and the physical errors, select automatically fix file system errors and search for and attempt recovery of bad sectors.
4. click on Start.
Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
http://support.Microsoft.com/kb/942092
Check your hard disk for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errorsKind regards
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
ProBook 4510 s: probook 4510 s windows upgrade
My mother has a ProBook 4510 s, which was bought right before Windows 7 came out (all about 2009, I think) so its mobile currently works on Windows XP (32-bit processor). She does not use the computer for much - mainly domestic use for Gmail, saving photos, printing, web browsing, etc - and hopes to upgrade Windows rather than buying a new computer. He arrived at the point where she cannot even download pictures on his iPhone to computer and iTunes can be loaded on computers Windows 7 or higher.
Because she has a ton of free space, and it seems that its operating system would allow an update to Windows 7, I want to know if it is better to just move him to 7 or upgrade to Windows 10.
Hoping someone can help me to determine if it's worth the trouble to do the complete upgrade of Windows 10 - his cell phone will be able to manage the upgrade - or to just upgrade to Windows 7, and see how that works before making the switch to Windows 10 eventually.
Thanks in advance for any help!
Hello:
Since there is no support W8.1, W8 and W10 driver for this model, I suggest you go on W7 and then try the W10, so that if W10 does not work, you can go back at least to W7, rather than to be up the Creek without a paddle if W10 does not work on the PC.
You should be able to use the W7 drivers for devices W10 not drivers for, but since I've not tested W10 on 4510 s, I can't tell you if it will work or not.
I tested it on the 6910p and the nc6400 and it works OK. The only thing I didn't try was the fingerprint sensor (driver has been installed), and there is no driver for the infrared port, so I disabled the device in the BIOS, because I do not use that either.
-
Error installation software device driver for removable devices in Windows Vista x 64
I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.
When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.
I select the recommended option: "locate and install driver software.
I click 'Continue' when Windows asks me permission to continue.
Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.
Then another window pops up saying this:
"Found New Hardware - device unknown".
Windows encountered a problem installing the software driver for your device
Windows found driver software for your device but encountered an error trying to install it.
Kodak
An error occurred during the installation of the device:
The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.
If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »
That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.
For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:
"Windows needs to install driver software for your USB Flash Drive", etc...
'Install the device driver software', 'USB Flash Drive search Windows Update'...
Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.
Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.
I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.
If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.
I know it can be frustrating to solve problems.
(A) was this post or hibernation sleep?
Microsofts troubleshooting KB
http://support.Microsoft.com/kb/928631
(B) the bios settings
First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer
It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.
Plug n play OS on conscious
could help Vista automatically recognize your USB
(C) what version where do you use? SP1? or gold?
(D) USB hubs may cause problems just be hubs. Power connected?
(E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?
Hope something here helps
Keith
-
Download 80080005 error message when you try to install updates in Windows Vista.
Original title: error 80080005
Hello
I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.
Hello
Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.
Try these methods and check:
Method 1: First of all, make sure that no proxy server is causing this issue.
a. click on the round to start, in the search field type cmd
b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.c. has the prompt, enter the following command exactly as written including spaces and press enter
netsh winhttp see power of Attorney
If this message appears, type exit, and then press ENTER.
Method 2:
Check if the bits service is started.
a. click Start, type services.msc
b. Locate the Bits (Background Intelligent Transfer Service) service.
c. double-click on it and check if the service is started and the startup type is set on automatic.
Method 3:
I suggest you follow the steps mentioned in the link one at a time and check.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
If the steps do not help, then follow the steps in the next method and check.
Method 4:
You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Put the normal computer as mentioned in step 7 of section.
Method 5:
I suggest you follow the steps:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.
-
The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.
Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I get the error 646 when trying to update for windows vista (KB973917). I was able to update manually when I got this error but I can't find where to download this update.
KB973917 (who is NOT a security update although it is security related) is only available through Windows Update.
Chances are protections in real-time to your antivirus or internet security suite (for example, Norton 360;) Norton Internet Security; etc.) is involved here. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
800b0100 error code when you try to install updates on Windows Vista
Error 800b0100 code happens while trying to make updates. I recently went back to the default factory settings and I try to do all the updates. I used the updater and fix it also. I restarted the computer and still no joy when you try to load the update for windows vista.
Hello
· Do you get this error when the individual any update installation (such as Service pack updates security etc.)?
Method 1: Turn off the firewall and antivirus software of third parties.
Step 1: Disable the firewall
(a), click on Start and type Windows Firewall.
(b) click on Windows Firewall.
(c) click on firewall Windows turns on or OFF.
(d) turn the Windows Firewall until we have install Windows updates successfully. If the problem persists then please continue with the next steps.
(e) once we install the updates, please turn on the firewall.
Step 2: Disable the anti-virus application installed on your computer. Disable the antivirus firewall.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps under step 7
Also see: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800B0100
-
ERROR! Oxc0190036! 1477/99902 (wsmcl.dll) on Windows Vista
Update Service Pack 1 on Windows Vista. The computer was restarting when it crashed and has error! Oxc0190036! 1477/99902 (wsmcl.dll). Help, please!
Hello
Try the procedure described in the following article:
Error code on a black screen when you try to install a Service Pack in Windows Vista: "0xc0190036": http://support.microsoft.com/kb/975430
-
Error on startup: "Could not access the local server", Windows Vista.
When I start my Windows Vista laptop, I get this error. This computer is connected to a wireless home network. We believe that this error may also have an impact on the performance of the computer as some websites are not accessible as well as some programs that require a lot of memory. Windows Defender ran a scan and found no problem, but my Virus of McAfee protection program will not start nor can I connect to my McAfee account on their web site.
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
Error message:-during the Installation of Adobe reader on Windows Vista
When I install Adobe reader on Windows vista. I get an error message - this installation package could not be opened. Verify that the package exists and you can access it, or contact the application vendor to verify that this is a valid window installation package.
Download another copy - this copy may be impaired. Save the download on your computer instead of just running. When it is on the desktop, right-click on it and click Run as administrator, and see if that helps.
Where are you downloading from? Get it directly from the Adobe site: http://www.adobe.com/.
Which version of Vista you are running, and all updates are installed including SP2?
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Price of MBA 11 inch battery?
Hello I just want to know what is the price of MBA 11 inch A1245 battery? Thank you.
-
A broken iPhone 5, now using 3GS
A broken my iPhone 5, now using old iPhone 3 g. How can I register 3GS when I need another device verification code? When I use the iPad to get the code, the 3GS does give me not an option to put this code. Help! Thank you
-
How to make BIGGER right scrolling?
I just want to make the scroll bar BIGGER - NOT "toolbars" that keeps popping up.
-
I can't reduce this screen. It's driving me crazy. You say no has ever asked this before?
-
Tecra R840 - WLAN disable when LAN connected
In my business, use the Tecra R840 Notepad and to improve the situation, we are considering turning off wifi when we put on cable network. We found that the last other models from other manufacturers have this option in the bios called "WLAN / WAN sw