error dll specific Module could not be found Local Settings\Application Data\Desktop cleaning Wizard\dskclwiz.dll

Similar Questions

• Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  Blue C:\WINDOWS\wmcicif.dll error (Windows XP) specific module could not be found

  My printer kept jamming so I went to reboot my computer and this is the message that appeared and continue to appear each time that I reboot or turn my computer now.

  I deleted and re-installed my printer in the hope that it could solve my problem, however, it did not work.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you solve the problem and not only correct the symptoms of the problem in just the startup message.  Deactivation of the item in msconfig 'fixed' nothing but the annoying startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove
  .  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• RUNDLL error C:\WINDOWS\dfgwovap.dll the specific module could not be found.

  Original title: RUNDLL error

  has anyone seen a RUNDLL error

  C:\WINDOWS\dfgwovap.dll

  the specific module could not be found.

  Since this jumped on my computer, I can run is more my outlook program.  I opened for 1 second and then closes.  I reinstalled a couple of times and the same thing happens.

  all thoughts

  Thank you

  Jon

  Hi Jon,

  1. don't you make changes before the show?

  Try these steps and check the result.
  Step 1: Check if a non-Microsoft program is causing this issue
  see How to configure Windows XP to start in a "clean boot" State .
  b. If the issue is not persistent, then from the article, follow the method 1 and method 2 to find out if any program is causing the problem.
  c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once more to solve the problem.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Step 2: If the problem continues, check if a system file is missing or damaged
  a. Click Start, click Run, type cmd and click ok.
  b. at the command prompt, type sfc/scannow and press ENTER.

  Note: You will be asked to insert the Windows XP disk, if a file is missing.

  For more information, see Description of Windows XP System File Checker (Sfc.exe)

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.

  Since I removed my old Lexmark printer and replaced by a Kodak ESP C310 printer I get the following popup every time you start... Error loading C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\LXBTtime.dll the specific module could not be found.

  Hello jackc37,

  Have you tried to reinstall your Lexmark printer and then uninstall, to check if everything is deleted?  When you started your system in a clean boot, you saw the error listed above?

  How do I uninstall Lexmark printers

  Please let us know status.

  Thank you

  James

• Error - APISupport.dll. the specific module could not be found

  I get this error message at the beginning C:\Users\Owner\AppData\Local\TB\APISupport\APISupport.dll. the specific module could not be found.how should I do.

  DS

  It is an element of conduit, which most people consider the malware.  I remove it and run Malwarebytes

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• c:\windows\eqixoxiwakev.dll the specific module could not be found

  Error message when starting windows xp: c:\windows\eqixoxiwakev.dll the specific module could not be found. Can anyone help? Thank you.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  C:\windows\ayofeworit.dll the specific module could not be found, the message pops up when loading office

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Why do I get an error message saying "the specific module could not be found" when opening an image?

  original title: RunDLL

  I get the window followed whenever I click on an image or a file:

  There was a problem starting c:\Users\Jim\AppData\Local\Temp\seitybu\sxxqrbw\wow.dll that the specific module could not be found

  Can anyone advise on how to fix?

  Hi Jim,.

  I suggest you to navigate to the location of the file in the error message and check if it doesn't matter what suspicious file is present. There could be opportunities that your antivirus software would have deleted a few infected file, but would have left a few remnants, which is the origin of the problem.

  I suggest you use Microsoft safety scanner and look for viruses in your computer.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Here is the link to launch the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Let us know the State of the question, so that we can help you.

• There was a problem starting msiihy32.dll that the specific module could not be found?

  When I start my computer, I got this message there is a problem starting msiihy32.dll the specific module could not be found, and I downloaded the msiihy32.dll, but still have the message so what can I do?

  Hello

  Where did you downloaded it go?

  Google has little information about this file, so it's probably a Malware startup more entry left which has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• Error message: there was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  This message appears when I start my computer.  I think my pc has viruses/malware.  My antivirus firewall program wouldn't start / missing.  I gave my pc days back and managed to restart the firewall.  But I get the message... There was a problem starting C:\Users\Trom\AppData\Local\Temp\toip0_tmp.exe the specific module could not be found.

  To clean malware, take a look here and try what is below if you still have the problem.
  http://www.selectrealsecurity.com/malware-removal-Guide/

  Try this program because it will show you everything that tries to run at startup.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• RunDLL - the specific module could not be found

  Original title: RunDLL

  That there was a problem starting

  RunDLL (following error at startup)

  C:\Users\Administrator\AppData\Local\KBDPopc.dll

  The specific module could not be found

  HOW CAN THIS ERROR ELIMINATED FROM START UP

  TKS

  It's a virus/trojan. It has been removed from your AntiVirus Scanner and registry entries are always present.

  Start regedit.exe and search (F3 or CTRL + F) for KBDPopc.dll and remove all the entries that you find.

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• RunDLL error, the specified module could not be found

  Good evening

  I have a RunDLL error message which keeps popping up

  "There was a problem starting.

  C;\Users\***\AppData\Roaming\pdvcec.dll

  The specific module could not be found.

  Please can you tell me why im getting this error.

  Thanks in advance for any help,

  Emma

  Original title: RunDLL Error Message

  FOR WINDOWS IT WORKS GUYS 8.x

  For users of Windows 8 on this number RunDLL error (HPStatusBL.dll)

  * IMPORTANT  (Activate prior the hidden files and folders)

  Windows Explorer - view - check the box next to "Hidden Items"

  Now, go to this site:

  C:\Users\(your user name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  (Maybe depending on who has installed the software, see other users if you do not do so in your profile)

  Remove the shortcut that HP does not decently cleanup during uninstall:

  Monitor alerts ink - HP xxxxxxxxxx

  It has nothing to do with a service, just a shortcut link that always tries to start which has been uninstalled or deleted.

• Error: 126 specific module could not be loaded

  Hello, I tried to install the engineering program and when I click on the shortcut for the program to run the program I got an error. Error: 126 specific module could not be loaded. It cannot load the dll file. How to fix?

  Hello
   
  1. have you followed the steps that I mentioned earlier?
  2. What have been the results?
  3. This only happens with this application?

   
  Method 1:
  
  I also suggest you to install the application from an elevated command prompt. do so right-click on the configuration file and click on "run as administrator" and then check if the problem persists.
   
  Method 2:
   
  I also suggest you run the application in a clean boot state, and check if the problem persists. Clean boot to avoid software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  

  http://support.Microsoft.com/kb/929135

  
  Note: do not forget to return the computer to normal after completing the troubleshooting by following the steps described in step 7.

• Error messages: specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL

  I get two error messages when windows is loaded.  Specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL
  How can I fix?

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  I suggest you make a system full scan just to be sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Error "the specified module could not be found" when the USB drive is connected.

  Original title: execution of disk error hard usb

  I use windows 7. whenever I have plugin a usb drive and open it it gives a shortcut of the same drive without showing all data and when I opened the short cut, the following error is displayed.

  There was a problem starting 4 # .ini
  The specified module could not be found.
  I also try to activate windows bit defender it gives error

  Internal error of shell. Please contact the software developers

  Code = 0xC000005, address = 0x10059E8D

  Hi Prashant,

  Try to uninstall the security essentials and install avast.  I have installed trial version, he found an additional virus and after that my system works fine.  Try it and check if it works.

  Concerning

  Patricia