Error during installation of SP3

Similar Questions

• C309g fatal error during installation

  Used the last full installation for C309g AIO. Under XP SP3. Wireless installation. Installation froze near the end to "product Configuration".

  After about 30 minutes, it is reported in a window titled: "C:\Documents and Settings\ (my username) \Local Settings\Temp\7zS5BFB\hpzsetup.exe"-«Fatal error during installation»

  Then place a file on my desktop that was supposed to fix the problem. But it wasn't only for installation of USB.

  Before that, the printer has been detected. The network is OK. Print 'Wireless Network Test report' shows all pass and no problems found. I can print and scan from another laptop on this wireless network.

  I totally uninstalled all HP software using Panel of control-add/remove, then reinstalled several times.

  This c309g worked at one point.  Also had a C4780 AIO as an old scanner flat 4570c on this network.

  I'm heading for Kodak, Lexmark or Brother.

  Click on the link below to find out how I completely uninstalled all HP "stuff" before you try to reinstall the full package all-in-one.

  He said do not to use the uninstall file - L4.bat, but I use it after the other 3.

  Before doing anything, I used "Revo Uninstaller" (free), instead of add remove, uninstall anything with HP or Hewlett-Packard in the title.

  Takes some time that whenever may require a reboot.

  I have not found all the HP files that are listed in the article, or in "services.msc".

  "Uninstall-L1..." 2, ... 3 and... 4 also require restart when everyone is finished.

  When does all this uninstall must start > run, type %temp%. Select all and remove the mess.

  Now, you can run the installation package.

  My c309g is now operational in printing and scanning. Also the Solution Center is back.

  Good luck

  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• HP Photosmart 6280 all-in-one: HP Photosmart C6280 all-in-One error - wstub 197370' «Fatal error during Installation»

  Hello

  I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?

  I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:

  "Error - wstub 197370'

  "Fatal error during Installation"

  And then starts to uninstall the entire software package and then request to restart to uninstall complete.

  Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!

  All advice is appreciated.

  Best regards, K

  Hi @k_san7,

  Welcome to the HP Support forum.

  I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.

  I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).

  I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.

  Then I would erase the temp directory.

  1. tap folder in the field "search programs and files".

  2 Select all the files in this folder, and then press the delete key to remove.

  Once removed to close all windows and restart the computer.

  When the computer restarts, download and install the latest version of the software and the printer drivers.

  Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Defective JavaScript and cannot be removed or reinstalled, get «fatal error during installation»

  As a result of an error indicating that javascript has not been installed (Internet options/security/scripting is set correctly) I tried to remove the Javascript (before a new installation) but which have resulted in a message: fatal error during installation (probably installshield). I'm so stuck without Javascript and cannot update or delete it.

  I have version 6 update 27 Javascript, Windows XP and Internet explorer 8

  Any help will be greatly appreciated

  Barry

  Hello

  You can run solve this link and try to uninstall java and check if the problem persists:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• "Fatal error during Installation"

  I am trying to remove Apple Mobile Device Support on my computer because my iPod cannot be detected.  I click on delete and it gets all the way to the end before reversing and showing the message «Fatal error during Installation»

  I solved this problem by clicking on edit instead of delete it. Then, when the software uninstall program apple appears, choose Delete. This should allow you to remove the apple software.
  There seems to be a conflict between the program uninstall ASU and windows.
  Please make sure that you clean the registry of unwanted entries before you reinstall the software from Apple. I recommend using CCleaner.

• Get error - "Fatal error during installation" when trying to remove the software

  When I try to remove a software via Add/Remove programs in Control Panel, I get this error message "Fatal error during installation" and I'm not able to remove this program. Help, please.

  Hello epsita esha.

  You can try to use the automated Microsoft FixIt to uninstall programs. You can choose the program you want to uninstall.

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  I hope this helps.

• Reference Dell D10S: Software 451dn Laserjet Pro 400 has error during installation.

  LaserJet works fine when plugged in to USB, but now moved to a place wireless. The software will not work.

  I tried install printer Win 10: "the pilot is not available.
  Tried to uninstall the universal printer driver, restart, reinstall the HP driver, error (without code).

  HP Print doctor can find the device downloads the latest version, but it crashes every time (error, no codes).

  Win 10 can see the printer... it is therefore in the range wireless.

  I tried all the software different packaging to win 10 on HP site... all get an error during installation.

  Here's what worked.  I downloaded the universal print driver from HP.  These installed to their default location.  Taking note of where they have installed.

  Then, 10 Windows, try installing the printer laserjet Pro 400.  "Missing drivers".<- this="" is="" an="" important="" step.=""  leave="" the="" printer="" icon="">

  Then go to control panel, small icons.  Device Manager.  Search for printers, find the Laserjet printers.
  Right-click and choose update drivers.  Do not update automatically.  Choose the manual option.

  Look for the universal printer driver.  Wait a minute... BOOM.  All right.  Printing of all wireless PC and laptop.

• Skype, a fatal error during installation.

  I tried to update my version of Skype, after I was told it was necessary for Windows Live Messenger, but during the installation, I got a popup telling me a fatal error during installation. I've toured all over the web looking for a solution to this problem, but the advice I have received indicate that I need help because I'm not as tech savvy, as apparently, I need to be.

  Hello

  I'm sorry, but we cannot help you with problems of Skype in the Vista Installation Forum.

  You can use the Skype Support.

  https://support.Skype.com/en/

  You will find a link here for their community.

  See you soon.

• PhotoSmart C6280 - fatal error during Installation

  I have Win 7 (64-bit) system and can not install the software for my C6280 all-in-One Printer.  I get a message "Fatal error during Installation" and then the software tries to uninstall.  During this process, a reboot is required and then the software tries to install again and it fails.  I'm in a circle without end of the installation-uninstall-install-uninstall...

  How to do this?  I want to uninstall completely all the software associated with this printer and then start over from the beginning.

  The issue that brought this situation was that I was getting the following message is displayed when starting:

  "There was a problem starting C:\users\Myron\AppData\Local\IsolatedStorage\HP\zelqof.dll.

  The specified module could not be found. »

  I guess the missing module would settle if I re - install all software associated with the printer as it is ONLY connected printer (USB) to the PC.

  Hello BigDog5280,

  Welcome to the HP Forums.

  I see that you have a problem with a loop uninstall/reinstall the software and drivers.

  If you have Norton 360 installed, please disable it and restart the computer.  When the computer is back on, try to reinstall with Norton 360 always off.

  Here is a link to a document that is on a Fatal Error ' error 1603. A fatal error occurred during installation "(MSI erreur 1603) poster in HP Software Installation in Windows "

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• Sims 3 gets CRC error during installation

  Hello, I would like to know how to get sims 3 to work on my laptop. I downloaded it but it happens with a crc error during installation. I have read that this can be caused when your computer needs to defragment if...

  To try to solve this problem, I downloaded a cleaning and defragmentation program. I cleaned my computer and tried to Defrag. I then discovered that I could not defragment if I had vista sp2. I downloaded sp2 eventually with the help of an advisor. There were a few flaws that prevented me to download it myself. Now I have sp2, that he will not yet be defragmentation without gel. So I can not even download the sims 3! Its very frustrating and I was wondering if you could help me to sort this please?

  Hi, I have the same error when I tried to install it on my pc.

  What I did:

  1. run the cleanup utility on the Local C drive windows disk

  2. restart your computer.

  3 run ccleaner , then click on "cleaner".

  Then, got to 'Register' then click Scan then click Fix all issues...

  4. prior to installing the Sims 3 game, clean installation disk using a disk cleaner and a microfibre cloth. Make sure the disk is dry until you load it in your DVD player.

  5. once the installation is complete, restart the computer. Then, refer to steps 1-4.

• Invalid Drive F:\ error during installation and removal of Nero 7 Essentials

  I installed Nero 7 Essentials on my computer about 2 years ago and then uninstalled. Recently, I tried to install it again and has encountered an Invalid Drive F:\ error with a fatal error during installation. All I want to do now is to remove Nero 7 from my computer; but I get an error Invalid Drive F:\ and cannot. Help, please.

  Hi JKoZZ,

  1. what the F drive on the computer?

  I suggest to use the Nero 7 clean tool available in the Web Nero site using the link below and check if it helps.

  http://www.Nero.com/enu/support-Nero7-tools-utilities.html

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fatal error during installation of Windows Live Writer

  A few days ago MSN prompted me to update my MSN to the latest version. I did and after the update, I noticed that I could not install Live Writer. I tried many times and I'm still stuck.

  I received an error message stating:

  "Fatal error during installation. .

  Please close all other open programs, and then try again. It looks like a another program prevents the installer to work. HR:0 x 80070643 "

  Help, please. Thank you.

  Hello twmagee,

  Since you have problems with Windows Live Writer, it is best to post in the forums of Windows Live Writer.
  Click here for a link to their forum.

  They have experts and available solutions in their forums.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PROBLEM WITH SHORTCUT - fatal error during Installation

  I seem to have trouble downloading anything.  I am trying to download iTunes and after download is successful - I clicked on the icon on the desktop (& Start Menu) and Windows Installer comes up - said his tent to configure iTunes... after a minute or so... appears a fatal error during installation.

  In the efforts to solve this problem - I installed the Windows Installer Clean Up and the SAME thing happens.

  It seems that something is blocking me to download anything.

  All my updates window are updated.

  Any help would be greatly appreciated.

  Thank you!

  Hi 08twinsmom,

  You run the computer as an administrator?

  I suggest you try the following steps:

  Step 1: Delete the Temp folder

  To clear the temporary files folder, follow these steps:

  1. on a computer that is running Windows Vista, click Start, type % temp % in the box start the search in the list and then click on Temp programs.

  2. If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  3. on the Edit menu, click Select all.

  4. on the file menu, click on delete.

  5. When you are prompted to confirm the deletion, click Yes.

  Step 2: Check if the Windows Installer Service is started and Auto value

  1. click on start-run, type services.msc, the, click OK.

  "2. when loads Services window, navigate to the" " " Windows Installer Service ', double click on it to open it,

  3 make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.

  4. If he once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  Now check if the problem is resolved

  Step 3: Put the computer to clean and test start

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  See the link below that relates to a similar question:

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP support assistant, could not be installed error"1603 Fatal error during installation".

  Original title: HP support assistant failed to install

  After the update for hp support assistant failed I uninstalled, downloaded the update & tried to reinstall. It fails to install... network error 1316.A reading from the file c:\windows\installer\hp support assistant.msi. Setup restores the action with error - 1603 Fatal error during installation, see msi.chm or msdn for more information. Help!

  Hello
  Is that the question is specific to HP support assistant?
  Method 1: Run the following fix - it:

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
  Method 2: Verify that the Windows Installer service is set to automatic, to do this, follow these steps:
  a. Click Start, type services.msc in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  b. in the list of Services, double-click Windows Installer.
  (c) in the properties of Windows Installer dialog box, click Automatic in the startup type list.
  d. click on start, click on apply and then click OK.
  e. start the installation of the software.
  Method 3: Unregister and register the Windows Setup program again
  See the following steps:
  a. Click Start, type cmd in the dialog box, then right-click on command prompt and click Run as administrator
  b. in the command prompt, type the following command:
  "MSIEXEC /Unregister." without the quotes and then click OK.
  Note: Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  "MSIEXEC/REGSERVER" without the quotes and then click OK. After you run this command, the operation is complete.
  c. try to install the program and check if the problem persists.

• Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

  Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application"How can I do this?

  Original title: when I turn on my computer

  You should consider carefully as pop - up and determine what application has a problem.

  If he has no idea anywhere in the pop - up, first physically disconnect your computer from the Internet (because in the following steps, you will temporarily disable your antivirus software).

  • Click Start and type "msconfig.exe" (without the quotes) in the search box and press ENTER.
  • When the "System Configuration" window opens, select the tab "start".
  • Uncheck the half of the listed items (for your convenience, click on "Startup Item" in the column header to sort the items alphabetically)
  • Click OK and restart (click here to avoid the warning that you are in a diagnostic mode)

    If the pop-up warning does NOT appear, the problem application has been one of the items you unchecked.  If this is the case, reopen the System Configuration and check again half of the elements that had checked you.

    Similarly, if the pop-up warning appears, then the application problem is that remained turned on. In this case, open the Configuration of the system, again check the items that you had disabled, then uncheck half of the remaining items.

  • Restart and continue the process until you have identified the problem application.
  • Once you have identified the problem application, open System Configuration once more, select "Normal startup" on the "Général" tab and restart.
  • Do not forget to reconnect your computer to the Internet
  • Uninstall or reinstall the application issue.