Error during upgrade battery ICS failed

Similar Questions

• Failed to create ramdisk error during upgrade (the Scratchconfig does not work?)

  I'm trying to use Update Manager to update ESXi 5.1 to ESXi5.5. I get the error "Failed to create a virtual disk of size 333 mb to store the upgrade image."

  The ESXi has lots of disk/ram left.

  I did some research and discovered a problem where the scratchconfig was pointing to a nonexistent device. I put the scratchconfig and restarted.

  After the reboot into the new folder, I saw various var, core, newspapers etc. of the files, but I still get this cannot create the ramdisk error when you try to upgrade.

  I tried various items/vmfs/volumes/datastore uuid/.locker-host and/vmfs/volumes/datastore uuid/scratch, both with the same result.

  I have confirmed that I can write in these new files.

  Whenever the newspaper said ERROR ', 'SPACE_AVAIL_ISO', expected '349773754', test found '0' despite the scracthconfig.»

  What I am doing wrong?

  It turns out that the other group had created another administrator account and deleted the administrator since the root account access.

  /etc/VMware/hostd/authorization.XML indicates that the root user has lost the role of 'administrator ':

  HA-folder-root

  10

  fake

  true

  -5

  root

  When ACEDataRoleId is set on '-1' this indicates the administrator. " In your case, the role has been set to-5 which is not a role defined and probably hardened with nothing to do.

• WMP 12 has encountered an error during upgrade - componet can not be upgraded

  Have been many site nothing works why can't uninstall and reinstall?

  Chet

  Hi chet,

  Thanks for posting your query in the Microsoft community!

  I understand that you have a problem with Windows Media player. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error with the error code?

  Try to uninstall and reinstall Windows Media Player.

  You can try to turn off and turn on Windows media player and check if it helps.

  Step 1:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find multimedia and uncheck the brand in the face of Windows Media player.

  d. restart the computer.

  Step 2:

  a. go to start and in the search type 'Turn Windows has or not'.

  b. click on "Turn Windows features on or off".

  c. find the multimedia functions and place a check mark in front of the Windows Media Player.

  d. restart the computer.

  Check out the link:

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Now, try to do a upgrade and check if you experience the same problem.

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• The upgrade to ESXi 4.0.261974 to ESXi 4.1.0 errors with "upgrade package validation failed"

  Hello

  I'm trying to upgrade a host 4, 0.x ESXi 4.1 using the vSphere host update utility WSXi. First, it downloads the patches as expected, I select the host, and select "Upgrade of home", and then I select the file "upgrade - ESXi4.0 - to-ESXi4.1.xxxxxx.zip" I downloaded. After a while, I get the message "upgrade package validation failure (not to read the metadata of upgrade file that is located in a folder temporary users where it was unzipped to)" and the update will fail. I tried with the client installed on an XP and a box of Windows 7 with the same question, and I tried a new download without any positive result. What I am doing wrong?

  Thanks for your help.

  See if that helps

  http://blog.vmpros.nl/2010/07/15/VMware-failed-to-read-the-upgrade-package-metadata-XML-upgrading-to-ESXi-4-1/#more-2953

• Error during upgrade

  I get this error when I get to the upgrade of database for LCm

  Database error database error incompatible version (found the version "1.40", waiting for the version "1.41 '")

  Any ideas on that?

  

  Hello

  As I wrote in my previous comment, it is a unsupported use case.

  Update 1.0.1 to 1.0.2 you must specify an empty database and use the migration tool to export data from 1.0.1 and import it in 1.0.2.

  You can take a look at the Administration of LCM guide for more information on how to do it.

  Kind regards

  Todor

• DBUA fails with errors during the upgrade of 10 g and 11 g

  Hello
  
  I have a Solaris 10 machine running Oracle 10 g (10.2.0) and one instance of 10g running.
  I have installed Oracle 11 g, created a new profile for the user oracle BONE (with ORACLE_HOME, PATH etc.) updated for the 11.1.0 values, I ran the utlu111i.sql tool from the directory of 11 g pre-upgrade.
  I started the listener for instance 11g, 10g instance startup.
  When you run from the directory of 11 g dbua ($ORACLE_HOME/bin) mode silent, I have the following text in the file silent.log:
  
  The upgrade wizard has failed in the implementation of the NPS database. /Opt/app/Oracle/product/11.1.0 oracle Home from the/var/opt/oracle/oratab file was used to connect to the database. The database does not Oracle Home /opt/app/oracle/product/11.1.0 or the used pfile /opt/app/oracle/product/11.1.0/dbs/initSNM.ora is incorrect. Correct the error, then run the upgrade wizard again.
  The upgrade wizard has failed in the execution of a query on the database. /Opt/app/Oracle/product/11.1.0 oracle Home from the/var/opt/oracle/oratab file was used to connect to the database. Either the database is not Oracle Home /opt/app/oracle/product/11.1.0 running or its not in an OPEN State. Correct the error, then run the upgrade wizard again.
  Could not proceed with upgrade due to errors.
  Fix the errors and try again!
  
  The oratab file is already changed for the 11.1.0 version - should I change back 10.2.0 and restart the dbua? Is it okay to run it from the 11.1.0 tree?
  
  Thank you for your time,
  Adrian

  Hello

  In a normal upgrade, I guess the oratab the 10.2.0 instance at the beginning, then it is updated once the database instance is upgraded - I'm wrong?

  Yes you are right. But I also faced same issue then the upgrade to version 10.2.0.4 for 11.1.0.7 database in ERP apps 11i. I changed the entry in oratab and upgrade completed successfully.

  Kind regards
  Xaheer

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation

  When you try to upgrade Windows 7 SP1 to Windows 10 ' 0xC1900101 - 0 x 20017 installation failed during SAFE_OS with an error during the START operation "is a problem recurring and none of the solutions posted for a Samsung RV511 work.

  When will there be a solution of Microsoft?

  Concerning

  Hello

  Since Windows 10 is a completely new operating system, the computer manufacturer might still not have designed and developed drivers for it. As suggested waiting for the manufacturer to release the necessary drivers for the hardware and then try the upgrade.

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• Error during the upgrade of OBIEE 10 to 11

  Hi all
  
  I came across this problem trying to upgrade my 10g RPD and Catalog at 11.1.1.7
  
  After the installation of 11G, I launched the upgrade of Oracle_Common/bin/ua Linux utility.
  
  I get the below error:
  
  UPGAST-00797: Oracle Fusion Middleware Upgrade Wizard cannot be run from an Application Developer Oracle home.
  
  Based on the Oracle doc there the following desc:
  
  UPGAST-00797: Oracle Fusion Middleware Upgrade Wizard cannot be run from an Application Developer Oracle home.
  Cause: The user has chosen to make an upgrade of an Oracle home that does not allow an upgrade.
  Action: No.
  Level: 1
  
  Type: ERROR
  
  Impact: upgrade
  
  
  So what should I do to solve this problem?
  
  Thanks in advance

  Hello

  First of all I am not familiar on GNU / linux.

  I tried in windows environment, that the RPD is deployed with any errors.
  But I ran the ua.bat file in the following path
  \MWHOME\Oracle_BI1\bin\ua.bat.
  while I am running oracle_common\bin\ua.bat does not respond to my local system.

  Please Mark if useful.

  Thank you

• Errors during the upgrade and Ininstall of Adobe Reader 10.1.3

  I have problems updating Adobe Reader 10.1.3. The following error is generated: "Fatal error during installation" - error 1603.

  I tried to uninstall 10.1.3 but it crashes with the following error message: "msiexec.exe has encountered a problem and needs to close."

  What are the steps to perform a manual uninstall?

  I must point out that the current version 10.1.3 seems to work very well.

  OS: Windows XP

  Thank you

  Try http://labs.adobe.com/downloads/acrobatcleaner.html

• Startup error messages appear suddenly following failed repartitioning

  Following a repartitioning my hard drive using Partiton Manager, that bad happened and destroyed my system, I have now reinstalled Windows XP preparatory to the high upgrade to the Windows 7 page. However, during the time it failed to boot up my laptop, and after reinstalling the operating system, I get a BIOS message that reads

  Reprogramming & establishing Link and, after apause, 2 error messages appear:

  PXE - E61: Media Test Failure, check cable
  PXE - MOF: Existing Intel Boot Agent

  Apart from food, there is nothing attached to the laptop.

  What goes wrong and I need to do to correct the problems, please.

  You know what, install the OS by using initial recovery DVDs and the problem is solved.

• Windows Update error W510 try to return fail

  I have a W510 ICONIA.

  I made a recovery in the factory defects, with Windows 8. I have this tablet 1.5 years and before I updated the bios and upgrade to Windows 8.1, who I've worked with like 8 months.

  After recovery I do an update of Windows, it has 104 updates waiting, but after installation and reboot, the Tablet say "error during the configuration of windows update. Trying to restore changes. Do not turn off the computer.

  Nothing happens and I can't run windows.

  Any help?

  Someone knows how to know with update fails?

  Solved. It took so long, but he returned and then it updated correctly.

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Error while UPGRADING OLAP AW

  Hello
  
  I use AWM 11.1.0.7.0B and the 11.1.0.7.0 BDD
  
  After one or two everyday, I get this error... Whenever I maintain the dimension, I get the following error...
  
  An error occurred on the server
  Class of error: failure of the Express
  Server error descriptions:
  INI: Error creating a generic Manager definition to < BuildProcess > TxsOqConnection::generic
  INI: XOQ-00703: error running command OLAP DML "(UPDATED MDCT. MDCT: ORA-37605: error while UPGRADING OLAP AW
  [ORA-00600: internal error code, arguments: [xspggepGenPSErase01], [], [], [], [], [], [], [], [], [], []]
  ') ', Generic TxsOqAWManager::executeCommand
  
  at oracle.olapi.data.source.DataProvider.callGeneric (unknown Source)
  at oracle.olapi.data.source.DataProvider.callGeneric (unknown Source)
  at oracle.olapi.data.source.DataProvider.executeBuild (unknown Source)
  to oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$ 1.construct (unknown Source)
  to oracle.olap.awm.ui.SwingWorker$ 2.run (unknown Source)
  at java.lang.Thread.run (unknown Source)
  
  To view the data the error
  
  BIB-9509 Oracle OLAP does not create the cursor.
  An error occurred on the server
  Class of error: failure of the Express
  Server error descriptions:
  DPR: Failed to create the server-side, generic cursor at TxsOqDefinitionManager::crtCurMgrs4
  INI: XOQ-00703: error running command OLAP DML "(AW ATTACH MDCT. MDCT RO: ORA-34738 PF: a serious problem was detected. Operations of the analytic workspace have been disabled.
  ') ', Generic TxsOqAWManager::executeCommand
  
  
  And when I am trying to detach or remove the AW gives the following error...
  
  java.sql.SQLException: ORA-34738 PF: a serious problem was detected. Operations of the analytic workspace have been disabled.
  ORA-06512: at "SYS." DBMS_AW', line 93
  ORA-06512: at "SYS." DBMS_AW", line 180
  ORA-06512: at line 1
  at oracle.olap.awm.connection.AwAttachmentManager.detach (unknown Source)
  to oracle.olap.awm.connection.AwAttachmentManager$ 1DetachWorkspaceThread.run (unknown Source)
  
  
  Help, please...
  
  Thank you
  BIBA
  
  Published by: [email protected] on July 21, 2009 05:48

  I think Jim refers to a delete an import/export / in your analytic workspace via the OLAP worksheet. This is the approach I used during the restoration of broken AW.

  OLAP worksheet:

  AW attach MDCT
  allstat
  Name of the limit to all
  Export all FEI OCDM.eif of the file
  AW detach MDCT
  AW truncate MDCT
  AW attach MDCT rw
  import all Fei file "OCDM.eif" data NPO naskip
  UPD; CMM