error exe not working not
Download this warning "caution 1 importer of Type libraries detected an accessor property 'sessionPlaylistCount' Get the type"WMPLib.IWMPNowPlayingHelperDispatch"without a valid return type." The importer will try to import this property as a method instead. PresidentailElection ".
. Exe copied into the installation program. Discover interop. Lack of WMEncoder.dll but can seem to find it anywhere. Never had this happen before.
Thank you
Bob V
Bob v
Your message is more suitable for the MSDN Forums of programming. Please ask your questions to
http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads
Tags: Windows
Similar Questions
-
New components is a new computer.
Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
Rebooted comp 5 times with the same problem after BIOS.Hi Milkshake83,
Thanks for posting. Proceed as follows for this error.
Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.
To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.
In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.
Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.
NOTE: you must leave enough RAM for the computer to start and run Windows.
For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:
304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systemsIf the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.
For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.
http://support.Microsoft.com/kb/318729
I hope this helps!
Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?
I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.
-
When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.
This has happened
Each time Firefox opened
I tried to download firefox.
User Agent
Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)
When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.
When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.
If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.
A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.
-
0x802d007 WinUpdate and BIT error does not work - nothing is fixing.
0x802d007 WinUpdate and BIT error does not work - nothing is fixing.
Hello
(1) what is the exact error code that you get?
(2) service pack you have installed for XP?
Method 1: Verify that the services are started
Make sure that BITS and the automatic updates service are started. To do this, follow these steps:1.Click Start, click Run, type services.msc, and then click OK.
2. in the list of services, click on automatic updates, and then click Properties.
3. in the startup type list, click Automatic, and then click on apply.
4. If the service status is stopped, click Start, and then click OK.
5.right - click Background Intelligent Transfer Service, and then click Properties.
6. in the startup type list, click Manual, and then click on apply.
7. If the service status is stopped, click Start, and then click OK.Method 2: You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an updateMethod 3: You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
For reference:How to troubleshoot a service that crashes in Windows XP
http://support.Microsoft.com/kb/934650How to resolve problems connecting to Windows Update or Microsoft Update
http://support.Microsoft.com/kb/818018Method 4: How to reset Windows Update components?Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/)Note: You may need the XP disc for some functions in the steps above.I hope this helps! -
computer does not start.
the screen message is: "autochk.exe not found."
second message is: "stop: c000021a (fatal system error)".
«the session Manager initialization process ended unexpectedly with the State 0xc00003a (0x00000000 0x00000000).»
"the system is stopped.
Hi Bobzurcher,
· Did you do changes on the computer before the show?
I suggest you to consult the article in the Microsoft Knowledge Base and check.
How to solve an error "STOP 0xC000021A.
http://support.Microsoft.com/kb/156669
Let us know if that helps.
-
I had the virus ' Vista Internet Security 2010 "deleted using McAfee, but now I can't start my programs and browsers because I see the error:"application not found"for C:\Windows\system32\rundll32.exe" ".
How can I fix this problem? I use Vista SP2Your computer is still infected. Only McAfee will take care about that. First run .exe from Doug Knox fix:
http://www.dougknox.com/XP/file_assoc.htm
Then follow the instructions here:
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010 MS - MVP - Elephant Boy computers - don't panic!
-
Unable to Dassault catia v5 Setup error: CXINS.exe not found
Original title: CXINS.exe not found
My os is win7 32 bit, and I want to configure Dassault catia v5, when I click on setup, this error all?
CXINS not raise in C:\Users\...\AppData\Local\Temp\TempDSUnload what should I do: its very important for me to install this software
Hello
1. are you able to install other applications?
I suggest you to try the steps below and check if it helps.
Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Follow these steps to reset the computer to start as usual:
(a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click continue.
(b) under the general tab, click the Normal startup option, and then click OK.
(c) when you are prompted to restart the computer, click restart.
Method 2: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers
Method 3: Clear the following temporary folder:
\AppData\Local\Temp C:\Users\Also enable the option Show hidden files
If the problem persists then I suggest you contact the software publisher.
Hope this information is useful.
-
I get an error, "CXINS.exe not found" when trying to install catia v5 Dassault.
Original title: 123
Unable to Dassault catia v5 Setup error: CXINS.exe not found in windows7
Hi dinesh_922,
Look here for the answers and troubleshooting tips.
http://www.catiatutorialcad.com/CATIA-help/
Depending on what version it is, my interpretation is that it is not backward compatible...
Good luck.
-
Delphi 7, I installed five days ago. I had no problem until today. When I open delphi 7, created a problem and he ran, appeared in the syntax error, and the program may not start:
Delphi 7 - fatal error: could not create output file 'project1.exe.Also I noticed that program saved in projects, each icon has a golden padlock. However, I can open and run any other programs that are not registered in the projects.Note: I am the administratorWhat can I do about it?Vasilis salvation,
Welcome to Microsoft Community where you can find the answers related to Windows.
According to the description, it looks that you are facing a problem when accessing Delphi7 on your Windows 7 operating system.
It would be great if you could answer these questions to help you further.
1. is the question confined with Delphi7?
2 have you made changes on the computer before this problem?
Note: If the issue limited only with Delphi7, then I would say to contact the factory for assistance program.
Please come back with more information on the issue so that we can help you better.
With the help of Windows-related issues feel free to post on the Forums of community of Microsoft and we will be happy to help you.
-
I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it
I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it
-
I get these errors after updating, could you please review and advise.
Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j000_8224.trc file:
ORA-12012: error on auto work 2160513
ORA-06576: not a function or a procedure valid name
Sun 23 Jun 19:02:55 CDT 2013
Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:
ORA-12012: error on auto work 2160514
ORA-06576: not a function or a procedure valid name
Sun 23 Jun 19:03:53 CDT 2013
Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:
ORA-12012: error on auto work 2160514
ORA-06576: not a function or a procedure valid name
Sun 23 Jun 19:03:53 CDT 2013
Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:
ORA-12012: error on auto work 2160513
ORA-06576: not a function or a procedure valid name
Sun 23 Jun 19:04:53 CDT 2013
Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:
ORA-12012: error on auto work 2160514
ORA-06576: not a function or a procedure valid name
Sun 23 Jun 19:04:53 CDT 2013
Errors in the /d04/schval/product/10.2.0/admin/SCHVALS1/bdump/schvals1_j001_8463.trc file:
ORA-12012: error on auto work 2160513
ORA-06576: not a function or a procedure valid name
Checked the DB links are working properly
DB DB link: where I get these errors
SQL > select count (*) from [email protected] ;
COUNT (*)
----------
61233
the ERP DB
APPS-VAL1 > select count (*) from [email protected] ;
COUNT (*)
----------
439
If I try to run it manually, I am getting error below.
DBMS_SCHEDULER BEGIN. RUN_JOB ("SCHEDULE_REQUEST_DEQUEUE", TRUE); END;
*
ERROR on line 1:
"ORA-27475: ' XXSAP. SCHEDULE_REQUEST_DEQUEUE' must be work
ORA-06512: at "SYS." DBMS_ISCHED", line 150
ORA-06512: at "SYS." DBMS_SCHEDULER', line 441
ORA-06512: at line 1
SQL > SELECT master, job_name, error # FROM dba_scheduler_job_run_details
WHERE error # LIKE '% 6576% '; 2
OWNER
------------------------------
JOB_NAME
--------------------------------------------------------------------------------
ERROR #.
----------
SYS
SCHEDULING_LOCATION_UPDATE
6576
SYS
SCHEDULE_REQUEST_DEQUEUE
6576
OWNER
------------------------------
JOB_NAME
--------------------------------------------------------------------------------
ERROR #.
----------
SYS
SCHEDULE_REQUEST_DEQUEUE
6576
SQL > select job, what from dba_jobs where broken = 'Y' or chess > 0;
no selected line
LOG_DATE STATUS JOB_NAME
--------------------------------------------------------------------------- ------------------------------ ----------------------------------------
23 JUNE 13 11.37.53.128960 AM - 07:00 IS NOT SCHEDULING_NOTIFICATION_UPDATE
23 JUNE 13 11.37.54.619584 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.38.53.728264 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.39.53.830833 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.40.53.929791 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.41.54.047578 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.42.53.273320 AM - 07:00 IS NOT SCHEDULING_NOTIFICATION_UPDATE
23 JUNE 13 11.43.53.529692 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.44.53.628774 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.45.53.739038 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.46.53.848009 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
LOG_DATE STATUS JOB_NAME
--------------------------------------------------------------------------- ------------------------------ ----------------------------------------
23 JUNE 13 11.47.57.220078 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
23 JUNE 13 11.48.53.329549 AM - 07:00 IS NOT SCHEDULE_REQUEST_DEQUEUE
3324 selected lines.
SQL > 1
1 * Select log_date, status, JOB_NAME from dba_scheduler_job_run_details where status = 'in FAILURE. "
Thank you
Vincent
I suggest you to move (i.e. rebuild) jobs in the XXSAP scheme rather than use the SYS schema. In this way, you can run "BEGIN DBMS_SCHEDULER. RUN_JOB' to XXSAP correctly.
Hemant K Collette
-
Managed server now work: error 404 - not found
Hi all
I am very new in this field and you just install weblogic 10.3.3 Server.
I created a Server Admin and a cluster of two managed servers.
Server Admin works and opens in the console of the user interface.
When I start the managed server, this is show in the cmd console
< Opinion > < WebLogicServer > < BEA-000360 > < server started operation >
but in the user interface, is to show that:
Error 404 - not found
RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
10.4.5 404 not found
Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
How to start the Weblogic managed server?
TIA,
VishalFix.
There is no separate UI for managed servers.
The follow-up, management and configuration on the managed servers, clusters are are using Admin Console only.Thank you
Sandeep -
Satellite U405 - S2833 Fingerprint error: could not open the sensor
Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.
I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.
I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.
Any help would be greatly appreciated.
Thanks in advanceI am also having the same problem.
My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.
Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.
I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.
It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.
As the above poster said, HELP!
Thank you.
... a little later...
Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.
First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...
Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.
Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.
Good luck.
Post edited by: rewind22x
-
Hey all,.
I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?
Hi tripleb316,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click on restart to restart the computer.
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
Maybe you are looking for
-
I tried to use the app tabs, but when I open it again my browser they're gone
I added my favorite tabs as tabs app but when I restart my browser they aren't here anymore - is this normal?
-
Back button with a focus for 5 d Mark III. How do I put in place?
How can I configure button back focusing on my new 5 d Mark III. Can not find the instructions manual supplied Canon or third book.
-
When I opened my my wave slider is always disabled
-
Problem of card mother-suggestions
I have a Desktop Pavilion p6310y and I lost my second mother. He has a Paragon M2N78 - motherboard and said that it is the only one that can be used on this computer. Does anyone know if there is another motherboard that can be used on this computer?
-
Newbie here and try to understand the different categories of community so what is Wiki? Thank you.