Error: Failed validation of the AIR. Invalid namespace

Similar Questions

• Error - failed to import the certificate - you can fix this here

  I get this message when you try to create a new generation.

  Error - failed to import the certificate - you can fix this here

  I created a new .p12 file, but also a configuration profile. I can't understand why this keep happening. Thanks in advance for any help you can provide.

  This error means that the certificate and the private key in the p12 file don't match. Take a look at this post, which describes in more detail the creation and validation of your p12.

  I have not watched the certificate remains to be seen if this is indeed the expiration date.  Will look at this next...

  Unrelated and probably that your certificate has indeed expired.

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Try to update CC Bridge and Photoshop CC 2014 generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210)

  Try to update CC Bridge and Photoshop CC 2014 Creative Cloud program generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210). I am running Windows 7. Previous traffic on this subject did not help my situation.

  Please clean the cache of the MAO by deleting after the contents of the folder:

  For Mac:

  ·        /Volumes/%volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0

  To win:

  ·        C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0

  Then try to run updates.

  Kind regards

  Ashutosh

• Error: Failed to clone the volume "C:".

  I am to convert a 5 minutes and Win2k Server machine in the conversion, I get the following error:

  Task: To convert a physical machine.

  Created the virtual machine '.

  ---

  '.

  Starting block at the level of cloning for volume "C:".

  Error: Failed to clone the volume "C:".

  The only reason I see this failure is because the C: drive is a local mirror of the F: drive.  Unfortunately, when the Converter vCenter came it doesn't gives me an option to virtualize the F: drive.  Similarly, our drive D: is a local mirror of the G: drive and only drive D: is looming on vCenter Converter.

  Anyone has an idea why this error occurs.

  Thank you very much!

  Kind regards

  -William

  I hope that you use the Converter 3.0.3 and not 4

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  You find me also in the PhD Virtual Backup support team

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "failed to create the toolbar.

  Original title: Quick Launch toolbar

  I have a Windows XP Home SP3 PC and when I try to open the Quick Launch toolbar, I get a message "cannot create Toolbar".

  the quick lauch folder appears to be missing, but it is not recreated with the help of IE4UINIT. EXE and re register the dll recommended in the MS site doesn't help either.  The aims of registry keys to the MS site ion also seems also OK.
  Any other suggestions please?
  Hi wheelyjon,
   
  This problem may occur if the Quick Launch folder has been deleted.
   
  To resolve this problem, re-create the Quick Launch folder.
  See the following article to do the same thing:
  Error message: failed to create the toolbar

• Error "failed to initialize the Viewer...". »

  I am trying to display a CD Microsoft Office Specialist approved courseware for Excel 2003 and I get the following error

  "Failed to initialize the Viewer. If you installed the Viewer to your computer, rerun Setup. If you access the viewer of a server, contact your system administrator.

  General exception. "

  I tried to run the patch as described on this site in 2006 and the command has been executed but I still get the same message, even after reboot. Someone else recommended to rename one of the files windows32 but it won't let me do - it just keeps asking me to try again. It was previously posted in MELL (Microsoft E-learning library).

  It comes with Vista, upgrade install and activate Forum.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel in the Office discussion groups above.

  At soon Mick Murphy - Microsoft partner

• How to deal with the error "failed to get the kernel function pointer".

  I was running smoothly first Pro CC all day today. I stopped at the end of the day and now when I try to launch first yet, only a few hours later, the program will not open and I get the error "unable to get the kernel function pointer.  Help!

  I run first on a Macbook pro i5 processor at 2.3 Ghz with 16 GB RAM, graphic card 512 MB intel HD 3000 running OS 10.10.3.  It worked well (although sometimes a little slowly) for one year. I keep the project file on the portable hard drive, media files on a port firewire 800 Gdrive.  It has been working well.

  The only thing that happened between the first success today and refusal to open the first tonight, I ran something of card/holiday calendar interactive multimedia for my son that I had installed a few days ago but not yet opened. When he installed Abobe AIR opened and did the installation.  To see if this can help, I uninstalled the holiday card and rebooted the computer a couple of times. No dice.

  Help!  Luke

  I have the same problem on several machines. What seems to be the case is first is losing track hence basic audio filters are on the system. The only solution that works for me is uninstalling first, then put it back. I found myself to do this every day or almost.

• VMware converter 5.5 failed with the error failed to partition the disk of destination

  I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

  Error: Impossible to partition the disk of destination.

  FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"

  
  

  Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

  Tried several ways as the storage of data changing but still receive the same error message.

  Anyone encounter this before?

  Hello

  Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

  The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

  Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

  The options I can think of are:

  -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

  -install new and copy data

  -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

  Kind regards

  Plamen

• FPGA error: failed to create the C Series module

  I use sbRIO 9631 with LabVIEW 2012, as well as the FPGA 2012 module. Everything worked fine until yesterday, I got this error when creating a new FPGA project.
  «LabVIEW FPGA: an error has occurred loading the VI on the FPGA device.»  Check that the target is connected and powered and that the target resource is configured correctly.

  After ignoring this error, I can create any VI in the FPGA target, compile it and it works but can not do anything with host one. MAX configurations show so no error.
  I have attached snapshots for convenience.

  Note: This sbRIO came with a DVD of LabVIEW 8.6 and similarly associated modules version. I had been using this version for a year. Then I got LabVIEW 2012 with the last modules and now facing this error.

  Hi NapDynamite,

  You should not need to uninstall your previous version of LabVIEW for the development of your PC.

  You can see what version of NOR-RIO you have installed on your sbRIO? You can view it by selecting the sbRIO under "Remote Systems" of MAX, and then by selecting the category of software. You may need to update the version of NOR-RIO that is installed on the sbRIO.

  You can try this first?

  Kind regards

• Error "Failed to run the server" in Windows Media Player

  Original title: Windows 7 pro

  Failed to open the media player. To send a message, the Server execution failed

  Hello Douglas,.

  Please, try the suggestions provided by Halima S in the following thread. You can ignore the troubleshooting you have already tried.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/window-Media-Player-12-Server-execution-failed/d42f8d49-fb8a-4283-9a65-387177903bbf

  Do not respond if you have any other questions. Thank you.

• Impossible to update the location of the repository going on OEM. Error "failed to apply the information in the repository.

  Hi gurus,

  I'm trying to change my installation of 11g OBIEE (horizontal scale). To do this, I created a share location for the RPD, catalogue, cache global and Scheduler scripts. I placed my SPR files and catalog also under the shared location.

  When I'm trying to update the shared in OEM location, it does not update the location of the repository of the action, get the error "'did not apply the repository information". "

  I can't solve this problem.

  
  

  Plz help me in this consider as soon as POSSIBLE.

  Kind regards

  MK.
  

  I discovered the cause of this problem after a lot of trial and error.

  The problem is I'm trying to specify the folder is not empty. There is a folder in this directory, because of this, the problem persists.

  Once I deleted the hidden folder and make sure the directory is empty, I restarted the services now everything went well.

  Kind regards

  MK.

• When the upgrade of 4501 MCU - failed validation of the image

  When you transfer the image from 4.4 to my MCU 4501 file I receive validation image failed.  I tried to use Firefox and IE9.  Please adivse which can cause this error.

  Thank you

  Package must be decompressed before being transferred