Error: Failed to clone the volume "C:".

Similar Questions

• Error: Impossible to clone the volume mounted on ' / ' to 'servername '.

  I'm doing a P2V for one of my Debian Linux server.

  I use coverter 4 autonomous.

  FAILD conversion each time to 3% with this error: impossible to clone the mounted volume on ' / ' to 'servername '.

  Here is the log file attached.

  I really need your help.

  Thanks in advance.

  where the VM helper is that it can resolve the hostname smtp2?  Can you try to do this by IP...

  Don't forget, the VM helper (according to its IP address and where it is connected within vSphere) must be able to communicate with the system physical source via SSH.

  The agent job, just before the failure:

  > \[2010-07-07 12:15:41.384 info B02CEB90 "[task-1'] Exception caught during the copy of volume: ' /usr/lib/vmware-converter/copyFileSystem.sh--sshClient/usr/lib/vmware-converter/ssh - root - host smtp2 - port 22 user - sourceMountPoint /-targetMountPoint/mnt/p2v-src-root / sshConfigFile--/usr/lib/vmware-converter/ssh.conf--sourceTarOption--rare ' failed." Return code: 2; Message:

  > / usr/lib/vmware-converter/ssh - z f /usr/lib/vmware-converter/ssh.conf root@smtp2 Pei 22 "tar - one-file-system - sparse-C / / CF-. » | tar - digital-owner/mnt/p2v-src-root - C / y - xf -.

  >ssh: could not resolve hostname smtp2: temporary failure in name resolution

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Error: Impossible to clone the volume mounted on "/" from "ip address."

  Hi, I have a question that the title is consistent with the provisions.

  I use vmware vcenter standalone 4 running under windows xp, convert CC4 to esx3.0.2, and I assigned the IP statiic virtual machine help and dns server.

  When it operate at 98%, it turns out the title: error: impossible to clone the mounted volume on "/" from "ip address."

  I searched Google, it was said by someone, converter does not recognize the volume of software raid.but I also tried the hardware raid of CC4, the result is the same as above.

  So who can help me. I have download all the log files.

  Thank you.

  The reason is a failure, it is that tar fails after spitting on too many of these errors:

  tar:. / var: 2008-10-24 08:02:37 time stamp is 4243881.056239962 s in the future

  This issue is described in the release notes: http://www.vmware.com/support/converter/doc/releasenotes_conv40.html#76

  Whenever the 4.0.1 ships we will prevent it from causing the P2V fails, until then, you will need to repair the clocks on 1 or two of your systems.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Error: Failed to clone the C: volume

  Hello

  I'm about to clone a Windows 2003 server that is running on a VMWare ESXi. The attached log shows error 67109009, but I can't know what that this subject.

  The clone goes to a mapped drive Z: on another Windows Server. I am administrator on this machine, as well as on the computer that I want to clone and I traced the sharing using my admin account.

  The converter starts and creates a few files but stops at 0% with the error in the subject. There is enough space on the drive Z. I can convert another machine using the same information identification and settings without problems.

  Any ideas?

  Kind regards

  Michael

  Hello Michael

  The log reads as follows:

  DISKLIB are RARE: 'z:\Clients\Demo_52f\Demo_52f.vmdk': did not push the disc: the specified network name is no longer available

  Try to provide the network instead of mapping path to z:

  BTW, I noticed that you use Converter 4.0.1. You can upgrade to 5.0.

  Kind regards

  Plamen

• Clone the volume mounted on ' / boot ' doesn't have a machine of REDHAT Enterprise 5

  Hello

  I downloaded and installed Voncerter Standalone Client 4.0.0 on a Machine virtual Windows 2003.

  I tried to convert a physical Machine to RedHat 5 in a Virtual Machine (esx Server 3.5).

  The following error occurred at 3%:

  Error: Impossible to clone the volume mounted on ' / boot ' of 'ComputerName '.

  No one knows what to do here?

  (I have not all additional configurations except those proposed in the Wizard)

  Kind regards

  lmayr

  Another customer recently had a similar problem where the 1st volume cloning failed because he used a partial host name and had not configured DNS suffixes for the static IP settings of the VM assistance network.  Please check that.  If this does not solve your problem, then please upload the logs of the task (the "export logs... ("link just above the lower-right event log.)

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• Try to update CC Bridge and Photoshop CC 2014 generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210)

  Try to update CC Bridge and Photoshop CC 2014 Creative Cloud program generates the error "failed to extract the downloaded files. Press Retry to download again. (U44M1I210). I am running Windows 7. Previous traffic on this subject did not help my situation.

  Please clean the cache of the MAO by deleting after the contents of the folder:

  For Mac:

  ·        /Volumes/%volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0

  To win:

  ·        C:\Users\\AppData\Local\Adobe\AAMUpdater\1.0

  Then try to run updates.

  Kind regards

  Ashutosh

• Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.»

  Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.

  Thank you for visiting the Microsoft answers community.

  The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• Error - failed to import the certificate - you can fix this here

  I get this message when you try to create a new generation.

  Error - failed to import the certificate - you can fix this here

  I created a new .p12 file, but also a configuration profile. I can't understand why this keep happening. Thanks in advance for any help you can provide.

  This error means that the certificate and the private key in the p12 file don't match. Take a look at this post, which describes in more detail the creation and validation of your p12.

  I have not watched the certificate remains to be seen if this is indeed the expiration date.  Will look at this next...

  Unrelated and probably that your certificate has indeed expired.

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• VMware converter 5.5 failed with the error failed to partition the disk of destination

  I tried to convert the centos linux server physical to virtual. However, I received an error message at 1% as below,

  Error: Impossible to partition the disk of destination.

  FAILED: an error occurred during conversion: "CalculateGPTPartitionLocations failed!"

  
  

  Conversion of GPT partition is available vcenter converter 5.1 and higher, so the GPT partition on the source server will not be a problem.

  Tried several ways as the storage of data changing but still receive the same error message.

  Anyone encounter this before?

  Hello

  Unfortunately there is a bug with Linux P2V Converter when the destination drive is greater than 2 TB (is not whether TPG, it's size). Sorry for the inconvenience.

  The solution would be to reduce the volumes instead of destination and/or their distributed on multiple disks. Another solution would be to leave unchecked high-volume and clone them manually after the conversion.

  Another misfortune is that these workaround solutions are not possible in your case - the root volume occupies approximately 4.3 TB, and the two 'start-up' and '-' are needed to perform a conversion with the reconfiguration.

  The options I can think of are:

  -make a manual P2V, i.e. to create the destination (with partitions, logical volumes and base) computer created and formatted, clone the data (for example the converter uses tar via ssh) and manually configure the virtual machine. The final step is, fixing/etc/fstab, installation of GRUB and rebuild the initrd image

  -install new and copy data

  -Optionally divides the volume of root on the source machine if possible and then convert it. For example, to add a new drive temporarily and move some data so that all volumes become smaller than 2 TB.

  Kind regards

  Plamen

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: "failed to create the toolbar.

  Original title: Quick Launch toolbar

  I have a Windows XP Home SP3 PC and when I try to open the Quick Launch toolbar, I get a message "cannot create Toolbar".

  the quick lauch folder appears to be missing, but it is not recreated with the help of IE4UINIT. EXE and re register the dll recommended in the MS site doesn't help either.  The aims of registry keys to the MS site ion also seems also OK.
  Any other suggestions please?
  Hi wheelyjon,
   
  This problem may occur if the Quick Launch folder has been deleted.
   
  To resolve this problem, re-create the Quick Launch folder.
  See the following article to do the same thing:
  Error message: failed to create the toolbar

• Error "failed to initialize the Viewer...". »

  I am trying to display a CD Microsoft Office Specialist approved courseware for Excel 2003 and I get the following error

  "Failed to initialize the Viewer. If you installed the Viewer to your computer, rerun Setup. If you access the viewer of a server, contact your system administrator.

  General exception. "

  I tried to run the patch as described on this site in 2006 and the command has been executed but I still get the same message, even after reboot. Someone else recommended to rename one of the files windows32 but it won't let me do - it just keeps asking me to try again. It was previously posted in MELL (Microsoft E-learning library).

  It comes with Vista, upgrade install and activate Forum.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel in the Office discussion groups above.

  At soon Mick Murphy - Microsoft partner

• Error: Failed validation of the AIR. Invalid namespace

  Hello

  Just downloaded and installed the Webworks 2.2.0 for Tablet OS SDK (https://bdsc.webapps.blackberry.com/html5/download/sdk) and v3.1 to Adobe AIR SDK from Adobe.

  When I tried to compile applications Webworks, I got following error:

  [C:\Program Research In Motion\BlackBerry WebWorks SDK for TabletOS\bbwp] bbwp... \test.zip
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive WebWorks
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [INFO] Compiling applications WebWorks
  [INFO] Packaging of the record bar
  Error: Validation of the AIR is not
  \Temp\bar-app5208961890444725744.XML: error 102: space name invalid http://ns.adobe.com/air/application/2.7

  I have never such a problem before when using the Webworks SDK 1.x and AdobeAIRSDK 2.5

  I tried to change the namespace AdobeAIRSDK in C:\Program Research In Motion\BlackBerry WebWorks SDK for TabletOS\bbwp\AirAppTemplates\src\WebWorksAppTemplate-app.xml, but I kept getting errors:

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/3.1

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/3.0

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.9

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.8

  Error: Failed validation of AIR... error 102: space name invalid http://ns.adobe.com/air/application/2.6

  Error: Validation of AIR... failure error 305: initial window content SWF version 11 exceeds namespace version http://ns.adobe.com/air/application/2.5

  I Googled, it resembles a known problem in Adobe but I got are the fix for Adobe Flex development.

  How can I fix for SDK Webworks?

  Thank you

  This is usually caused by people simply crush their old AIR SDK installation instead of using a brand new installation of it and using our Installer. When you installed the SDK latest were you pointing to a pure install 3.1?