Error "Failsafe call support" Poweredge 1950

Similar Questions

• (Redirected) Dell poweredge 1950

  I have a dell poweredge 1950 server that was given to my school and I am trying to install windows server 2003 on it, but an error saying:

  Setup did not find any hard drives installed in your computer.

  Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running

  How can I fix?

  I also tried to boot Ubuntu from a usb key and that no longer works.

  I also said to update BIOS or Flash the Bios but I don't know how to do and do not know if that'll fix it.

  I want to just get to the top and running, it can be Ubuntu or windows everything is easier.

  Any help would be greatly appreciated

  Better for this post in the Forum Server-PowerEdge, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Error 2503 called RunScript is not marked in progress

  Cannot add or remove programs, always get this - "error 2503 called runscript is not marked in progress" the date in Windows Vista SP2 is set correctly.  In my view, that this error occurred initially during the installation of an upgrade of the program.  I also set permissions of files to show the files hidden by a suggestion. I'm at a standstill, any help is appreciated.

  Hi ALSJeff,

  O which program are you trying to install or uninstall?

  This problem occurs if the date is incorrect. Since you've already tried, try the following steps.

  Step 1

  Use the windows Cleanup utility to uninstall programs and then install the required programs.
  http://support.Microsoft.com/kb/290301

  Step 2

  Try to activate the built-in Administrator account and check if you are able to install or uninstall programs successfully.

  http://support.Microsoft.com/kb/555910

  Try these steps and let us know the result.

  Bindu S -Microsoft Support
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• PowerEdge 1950 problems

  I have a dell poweredge 1950 I am trying to load windows 2003 server on but keeps telling me that Setup not found not disks.i downloaded the controller driver on the site of lsi and copied on a diskette disk.i pressing f6 during installation of the OS and tried to install the driver from a floppy external drive.but usb system do you want mtp lsi supported stuff and I press S to mean yes he loads the driver but continues to get back to the page where it asks if I want to load support.what should I do? someone help pls

  
  

• map of scsi (redirect) dell poweredge 1950

  Hello world

  I installed and running a Dell poweredge 1950 that I use it to backup (tape) using Backup EXEC 2014. In the alley, he has an empty slot for a SCSI expansion card where a need can connect via a SCSI connection a different external tape drive. Due to the fact that the dell model is quite old, it is difficult to find a type of card.

  I found online something to my request: [View:www.xbyte.com/ProductDesc.aspx]

  but the problem is that it has two SCSI ports and it is too big to get it. I tried to find one with a single port, but I can't seem to find it. Have you also had this problem and if so where you bought the SCSI expansion? There is also the option to purchase a SCSI cable / USB, but I don't want to go with this solution. All advice what to do or where to buy expansion card I need.

  Thanks for the tips.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• : Error 35 call external function of the object

  I get "error 35: error when calling external object function driverinit on line 302 of the event open"and impossible to open a program. " A few solutions that I found for this search refer to an update to the SQL Server.  The only thing I tried to do lately is to update a printer driver, all was working fine before this.  I got an SQL error on a website trying to access the FAQ section.  I found an article to download an update to the original version of SQL Server 2005 SP2 but not sure if that's what I really do.  Can anyone help?

  CRTet,

  Error 35 is not a common Windows error. It is very likely that the registry scanner above will only cause more problems.
  The error you get is from your application. Given that this is not generated by Windows, I highly recommend directly contacting the support of bookkeeper.

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The lamp indicator yellow LED on Dell PowerEdge 1950

  Hello

  You asked me to "remove" the warnings of several Dell PowerEdge 1950 LED amber.

  I looked at the LED and was unable to 'remove' the warning using the controls on the LED display on the front the 1950s.

  How this is done?

  Thank you.

  Hello

  If the error is not active then you can get rid of the clear amber of the erasure of the journal of material. You can either start to the BMC to clear the or use one of our management as OpenManage Server Administrator utilities.

  Thank you

• ORA-39127: unexpected error in call to 'WMSYS '. "" "" LT_EXPORT_PKG '. "" SYSTEM_INFO_EXP ".

  While the export of database complete expdp following errors show?

  Start "SYSTEM". "" EXPORT_JOB_150506150137 ":

  Current estimation using BLOCKS method...

  Treatment of DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA object type

  Total estimation using BLOCKS method: 2,906 GB

  Object DATABASE_EXPORT/TABLESPACE of treatment type

  Type of object DATABASE_EXPORT/PROFILE of treatment

  Treatment of DATABASE_EXPORT/SYS_USER/USER object type

  Treatment of type of object DATABASE_EXPORT/SCHEMA/TYPE/SCHOLARSHIP/OWNER_GRANT/OBJECT_GRANT

  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, PRE_SYSTEM_ACTIONS, PROCACT_SYSTEM

  ORA-39127: unexpected error in call to 'WMSYS '. "" "" LT_EXPORT_PKG '. "" SYSTEM_INFO_EXP ".

  ORA-44002: incorrect object name

  ORA-06512: at "SYS." DBMS_ASSERT", line 383

  ORA-06512: at "SYS." Dbms_metadata", line 10079

  Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ

  Treatment of type of object DATABASE_EXPORT, SYSTEM_PROCOBJACT, POST_SYSTEM_ACTIONS, PROCACT_SYSTEM

  SQL > select * from v version $;

  BANNER

  --------------------------------------------------------------------------------

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  PL/SQL Release 11.2.0.4.0 - Production

  CORE Production 11.2.0.4.0

  AMT for 64-bit Windows: Version 11.2.0.4.0 - Production

  NLSRTL Version 11.2.0.4.0 - Production

  SQL > select * FROM SYS. EXPPKGACT$ WHERE SCHEMA = "WMSYS";

  LEVEL OF SCHEMA PACKAGE CLASS #.

  ------------------------------ --------------- ---------- ----------

  LT_EXPORT_PKG 1 1000 WMSYS

  LT_EXPORT_PKG 2 1000 WMSYS

  -------------------------------------------------------------------------

  expdp

  Export: Release 11.2.0.4.0 - Production Wednesday, may 6, 16:11:43 2015

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  ---------------------------------------------------------------------------

  Operating system == > > Windows server 2008 R2 Enterprise Edition.

  RAJESH. PK

  Hello

  Conn / as sysdba
  create the table sys.exppkgact$ _backup in select * from sys.exppkgact$;
  remove the sys.exppkgact$ where package = "LT_EXPORT_PKG";
  commit;

  Run the new expdp

  'This eliminated error' now

  Thank you Top.Gun your fast support.

  Rajesh

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• PowerEdge 1950 I have Gen with a Xeon X 5450?

  Is a Gen Poweredge 1950 motherboard, I support a swap of the Xeon 5060 for a Xeon X 5450 CPU? I know the Gen III support this CPU, but is it possible to put one in the first generation without a Board?

  Nope. Only boards III will support the 5400 series processors.

• PowerEdge 1950 SAS 5 / i maximum capacity of hard drive?

  Hi guys,.

  I am planning on getting an upgrade on one of our PowerEdge 1950 servers which has the SAS 5 / i controller.

  Currently as 1 x 80 GB SATA II drive and 1 x 250 GB SATA II hard drive.

  The upgrade, I'm eager to replace the 250 GB SATA II with a 2 TB SATA II drive so we can merge our cluster of stale data (Intel Celeron D 3, 06GHz) and our well-built used 1950 together to save power and room on our grid, while making access much faster data.

  Because the Cluster consists of 1 x 1 TB Drive and 1 x 500 GB drive, it would be impractical to pop just readers to the 1950s as two disks approaching their capacity. They also get a bit now with the 1 TB drive with a warning sector re-appropriated in SMART County (we received as a replacement for factory refurbished for a new brand doesn't have a disk of 1 TB in December 09).

  Are the questions I would ask: what is the maximum capacity hard drive SAS 5 / I controller can accept and: what is the combined total capacity of the hard drive?

  Obviously with the latest firmware of the controller (hence the reason why I request in a new thread).

  Thanks for your answers,

  Chris

  If it is a disk 2 (3.5 ") 1950: 2x2TB storage = 4 TB of total disk; 0 = 4 can be used to RAID, RAID 1 = 2 TB usable.

  If it is a 4 drive (2.5 ") 1950: 4x1TB storage = 4 TB of total disk; RAID 0 = 4 TB usable, usable 10 RAID = 2 TB, RAID 5 = 3 TB usable 2xRAID 1 = 2x1To can be used.

  I guarantee you that it refers to the total disk space of all disks included with the machine in the sale.

  A single disc (not the total of all disks in RAID array) can not be greater than 2 TB on any of the controllers supported for a 1950 (SAS PERC 5/6, 5/6).

• I get a JavaScript Application error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!

  (And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported. It is a film of saved project. How should I do?

  Creating Windows DVD gives me an error; not a supported file type, a TI could not be imported.  It is a film of saved project. How should I do?

  Hi jsims313,

   

  Welcome to Microsoft Answers Forums.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  ·         What is the format of the movie saved project file?

  ·         When you get this error message?

  To publish and burn a movie to a DVD, you must have Windows DVD Maker, which is included in Windows Vista Ultimate and Windows Vista Home Premium. You also need a DVD burner.

  1. Insert a DVD recordable or rewritable Virgin into your DVD burner.
  2. Open a project in Windows Movie Maker.
  3. Click file, and then click Publish Movie.
  4. Click DVD, and then click Next. Creation of DVD Windows opens.
  5. All the steps to create a DVD using Windows DVD creation.

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.