OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

Similar Questions

• I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand wh

  I really need someone to help me. I tried to figure out how to select a PDF to convert a Word doc. When I go to select a PDF file, all that comes is the WORD documents. doesn't show ANY of my PDF files... Please help me understand what is happening? We put it on automatic renewal so I know it's not that we have not renewed this subscription, because we pay automatically.

  Hi olivias,.

  Looks like there may be some confusion on your system which application should be associated with PDF files. You can reset the file name associations by following the steps described in these articles (depending on your operating system):

  How to change the default application for a file type. Macworld

  http://Windows.Microsoft.com/en-us/Windows/change-default-programs#1TC=Windows-7

  Please let us know if you have any additional questions.

  Best,

  Sara

• Failure installing ESXi 5.1.0 on Dell PowerEdge R210 II

  Hi all

  I tried to find my answer in the existing forums and found a similar mistake (Forum #423438), but he had put end to saying that particular server is not supported. I bought the different server, the PE210 II, and he showed up on the list of support for VMWare. If you need of advice please.

  It is a new server out of the box, bought without Windows/Linux installed. Get the installation to the point below where it was looking to select a drive... and he just stood there. When I hit F1 for more details, I got the text at the top left of the screenshot. "An unexpected error has occurred. Error code: YMxvZy5we... "Look at the logs for more details. AttributeError: 'Text' object has no attribute 'device'

  

  No idea how to go beyond this? Really, we want to start using VMware and bought equipment to devote to it. Now I can't make it work.

  Thanks in advance for any help you can provide.

  Scott

  Unfortunately "S" PERC controllers don't are not supported with ESXi, it may not even be detected during installation at all (see KB VMware: cannot install ESX/ESXi with Dell S class PERC)

  André

• Hello everyone: need someone to help me with something simple.

  HP technical support has not been much help to solve this problem. Could someone help me with this problem please.

  OK here is the scenerio. I just bought an Officejet Pro 8600 Premiunm AIO Printer. I am replacing an Officejet 8500 Pro with this new which is just one generation located under the new.

  The problem is that no caller ID appears on the display screen. I saw him once, but that's all. Technical support told me that he is not supposed to appear. But I have to disagree. Whenever I receive an incoming call, the display shows "incoming call of" but no caller ID information. The old 8500 displays information and I also saw him 1 time on the 8600. But technical support still said no. I got in touch with them 3 times on this issue and I have still a few words right person English, which is frustrating to try to commuicate with them.

  Please someone with the Officejet Pro 8600 printer, could check you how the caller ID works on your printer. So I need to know if mine is not working properly I can get it exchanged. But if she does not appear on yours, then I know that this is not supposed to appear. I just bought this printer 2 weeks ago. All my phones in the House appears the identifying information from the appellant, but just not on the printer, so I know that's not on the end of the phone company. ANY help will be greatly appreciated by everyone. Thank you!!!

  Yes, the caller ID should be appear.  I can't think many that might interfere with it.  You can try to update the firmware, just follow the link and it will take you to the instructions, but I don't know if this is a problem in the firmware or not.  What phone company you use?  Do you have digital services through this company, such as DSL or VOIP?

• I've updated my pc from windows xp to windows 7 since then I can not get my headset & mic to work. I know very little about computers and I need someone to help me, please.

  I've updated my pc from windows xp to windows 7. Since that time my headset & mic do not work. I know very little about computers, so I need some help, please.

  Not all Windows XP PCs, or their hardware is compatible win7.

  Usually if the PC manufacturer, or the manufacturer of the motherboard so a generic desktop computer provides no specific drivers for win7, its does not work

• I have a server with windows Small Business Server 2011. I need to uninstall windows SBS and install Win 7 pro on this server and use it as my personal computer. is this possible?

  I have a server that I do not use. She has windows SBS 2011.  I need to convert this powerful server to my PC I need.  Please tell me if this is possible, and how to do this.

  Thank you

  Could you provide the specifications of the server?

  Companies often convert departmental servers to client machines of the time when they are upgrading to the most recent. The process should be easy by inserting the Windows 7 disc and perform a custom installation.

  Consider the following text:

  How to: perform a customized Windows installation

  See the section for Windows 7.

• Install a non-of a Dell Poweredge 2850 server operating system

  Hello everyone.

  I was wondering how I could go about the installation of operating system, including Windows 7 and Windows XP on my server. I understand that they are not made for the server, but I would use Windows 7 instead of the server operating system. Windows XP is an option, but I'd rather not, if I have to

  Stick the DVD in the drive and start to install.  Chances are that Windows 7, like server 2008R2 will NOT have the drivers for the controller RAID (PERC 4e/Di), so use the driver 2008R2 for the RAID controller (and any other device requiring disks after installation).

  Controller RAID PERC 4e/Di to 2008R2 driver:
  http://ftp.Dell.com/SCSI-RAID/LSI-LOGIC_MULTI-DEVICE_A00_R227150.exe

  Also keep in mind that PERC does NOT support non-RAID, so you MUST configure RAID before installing, or even with the right driver, no hard drive is visible.

  Potential problems:

  Graphics - you should probably use the drivers of graphics/video 2008 x 64 for a decent resolution.  Keep in mind that server (such as 16 MB video memory) graphics will run NO Aero or high resolution/refresh.

  DRAC - if you have a DRAC (Dell Remote Access Controller) card installed, you will not be able to install drivers to meet these devices in Device Manager.

  Management system - software of management of Dell is NOT supported on the client OS.

  Other:

  In the 2850 processors do NOT support the VT, then you would be very limited with virtualization options.

  Sounds: there is no sound on a server.

• Dell PowerEdge 1950 BMC help!

  Hello

  I thought that the server takes a long time to start. I hooked up to a monitor and found that the BMC was having a "communications failure". I found also that the DRAC5 installed on the server was not working. I scoured the forums and I read the update from the BMC would solve this problem. I have 2012 R2 server installed on this system, so I downloaded the 2.50 for the BMC update (.) (EXE) and started to install it, fans crawls up to maximum speed and then I got a BSOD when the server restarts the PERC6 now cannot see my 2 TB drive that windows (SATA) installed, he can see the 300 GB SAS drive.

  Is it possible to get my 2 TB hdd working again and to get the BMC to work?

  Thank you

  Hardware and software failures occur. May not have been avoided. However:

  You might have been able to reflash the firmware BMC (unless it is completely unresponsive or nonfunctional).

  You may have attempted to clear the system NVRAM.

  As far as the reader goes. It is very important to learn the difference between CLEAR and IMPORT and when to use one or the other.

  Finally, consumer/desktop/computer portable readers should not be used in servers. WD Green, blue and Red are all bad choices for use on RAID of company systems.

• Cannot install ESXi 5.5 on Dell PowerEdge T620

  Hello

  I have a Dell PowerEdge T620 server and I want to install VMW VSphere Hypervisor 5.5 on that.

  I tried 2 ways above, but they are not successful.

  Track 1:
  -Start with DVD integrated with server
  -Config for RAID 5
  -Choose the option "VMW ESXI 5.5 HDD"
  -Error: "the provided raid configuration is not supported" and force reboot me.

  Track 2:
  -L' boot using an ESXI 5.5 CD-ROM
  -Follow the step on Setup screen.
  -Scan disk step HARD to install the process is too long too long scan...

  I hope that an idea can help me solve that.

  Thank you!

  You use the ESXi Dell installation?

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?DriverID=20VNP

• I would like to know if someone could help me to download the Flash player

  I need someone to help me to download, because it does not give me the download button

  Thanks, it was a problem with my modem, not the adobe program. It has been fixed, but thanks again!

  Carla O. Martinez R.

  Translator

  [email protected]

• I downloaded a file 'ADBESTPPCS3_WWE' for CS3. I need to know how to install it.

  I downloaded a file 'ADBESTPPCS3_WWE' for CS3. I need to know how to install it.

  Hi Brian,.

  Please double-click and run the file you downloaded to start the installation.

• Install ESXi on a Dell PowerEdge R820

  
  Greetings,

  I try to install ESXi on a Dell PowerEdge R820 server.  I have problems with the reason of the installation because the NETWORK adapter is not supported by the operating system (5.1 ESXi).  I did a little research and discovered that there are custom versions of ESXi out there to install on vaious systems.  That would be the problem?  If so, does anyone know a particluar website that I might be able to get the correct version of ESXi 5.1 for this server dell PowerEdge R820.
  Here are the specs:
  Dell PowerEdge R820 - RAID 5
  Interface NETWORK Broadcom 1 GB card

  Xeon processors (w / 8 cores)
  512 GB RDIMMS
  3 x 146 GB SAS hot plug hard drive

  Any help would be great!  Thank you!!

  Graduate of evil

  If so, does anyone know a particluar website that I might be able to get the correct version of ESXi 5.1 for this server dell PowerEdge R820.

  Try this site:

  Experience of VMware Front: ESXi-Customizer

  Graduate of evil

  Prepare for more fighting after obtaining the diploma

• Installing 2008 R2 on PowerEdge 1950

  We picked up a PowerEdge 1950 Server opportunity and trying to install the OS to 2008R2. "The system starting passes through the different screens and the cursor just keeps blinking after the following message" PXE - E61: Media test failure, check cable "PXE - M0F: exiting Broadcom PXE ROM.

  When you reboot with the 2008 R2 media in the drive once the installation type is selected in the screen "Where do you want to install Windows?" he says "no hard disk found. "Click on load driver to provide a driver for installing mass storage", I found the driver but how to install that when I try to load the driver it does not recognize.

  Any help would be appreciated!

  Thank you

  San

  Demarrer start CTRL-r, highlight the controller on the VD MGMT, F2 screen, Create New, select the disks that you want in the table and RAID level, give it a name if you want, and then check the boxes advanced and Initialize.

• I need someone on the phone to help me install acrobat standard dc

  I need someone on the phone to help me install acrobat standard dc

  Hi DAVID CHESLIN,.

  You can contact the customer service at the https://helpx.adobe.com/contact.html

  Kind regards

  Aurélie hamadi

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)