* ERROR *: file d:/build/ob/bora-127388/bora/vim/lib/gvmomiMOMgr. c: lin

Similar Questions

• NOT_REACHED d:/build/ob/bora-1379776/bora/lib/disklib/sparseChecker.c:1308

  Hey guys,.

  I recently copied on my VMs for my Linux installation to my installation of Windows. When I try to turn on one of them, you see the following error:

  Fatal error VMware Player: (worker #0)

  NOT_REACHED d:/build/ob/bora-1379776/bora/lib/disklib/sparseChecker.c:1308

  A log file is available in "C:\Users\filip\vmware\VM_NAME_HERE\vmware.log".

  You can request support.

  To collect the data to be submitted to the technical support of VMware, run 'vm-support.

  We will respond on the basis of your entitlement to support.

  and VMware Player goes back to my VM library. What is the problem with my virtual machines (VMware Player) and how to fix it?

  I tried to access my Windows partition from Linux (rather than access my Linux from Windows partition) and copy the file again - it works now! Thanks for your help.

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• [Error running javafx jnlp to the browser app: CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-Core-EjbClient.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 5185

  Can someone help me with this problem?

  I use netbeans 7.4 to build and launch my javafx application, the application works fine running on desktop, but when I try in chrome/firefox or ie browser I the erros below.

  PS: all the jar are signed and all permissions are granted.

  Thank you very much!

  Davis

  ****

  10.45.2.18 make Java plug-in

  Using a versão 1.7.0_45 - b18 JRE Java hotspot Client VM

  Diretorio House usuario = C:\Users\Davis Gordon

  ----------------------------------------------------

  c: limpar Alana console

  f: concluir objetos da fila continues

  g: lixo coleta

  h: exibir mensagem ajuda esta

  l: descartar lista carregadores classes

  m: print memoria uso

  o: trigger Journal

  q: ocultar console

  r: recarregar configuracao da politica

  s: descartar propriedades e sistema of settlements

  t: descartar lista threads

  v: descartar do son

  x: Limpar cache classes carregador

  0-5: define nivel fertilizacion como < n >

  ----------------------------------------------------

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-Core-EjbClient.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 5185

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-App-API.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 116706

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/App-Painel-Controle.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 141981

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/Tedros-Box.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 200921

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-Core-Model.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 47516

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-Core.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 108000

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-DataAccess-Model-API.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 13588

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-DataAccess-Server-API.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 32124

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-Exception.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:13 BRST 2013, length = 2624

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-Util.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:14 BRST 2013, length = 15348

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/Tedros-FXComponents.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:14 BRST 2013, length = 282972

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/commons-collections-3.2.1.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:14 BRST 2013, length = 583672

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/eclipselink-jpa-modelgen_2.4.1.v20121003-ad44345.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:14 BRST 2013, length = 12387

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/commons-lang3-3.1.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:14 BRST 2013, length = 319222

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/javax.persistence_2.0.4.v201112161009.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:20 BRST 2013, length = 128747

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/jfxrt.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:23 BRST 2013, length = 15117378

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/openejb-client-4.5.2.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:23 BRST 2013, length = 318492

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/javaee-api-6.0-5.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:20 BRST 2013, length = 989597

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/org.eclipse.persistence.jpars.source_2.4.1.v20121003-ad44345.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:23 BRST 2013, length = 65144

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/spring-beans-3.0.7.RELEASE.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:23 BRST 2013, length = 563508

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/org.eclipse.persistence.jpars_2.4.1.v20121003-ad44345.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:23 BRST 2013, length = 93694

  CacheEntry[file:/C:/Desenv/Projetos/workspace_beta02/Tedros-Box/dist/lib/eclipselink.jar]: updateAvailable = false, lastModified = Thu Dec 12 20:23:19 BRST 2013, length = 8449501

  ***************

  JNLP

  ***************

  <? XML version = "1.0" encoding = "utf-8"? >

  " < jnlp spec ="1.0"xmlns:jfx =" http://JavaFX.com "href =" Tedros - Box.jnlp "> "

  < information >

  < title > Tedros-Box < /title >

  < vendor name > Gordon Davis < / seller >

  value null < description > < / description >

  < offline permitted / >

  < / information >

  < resources >

  " < jfx:javafx - runtime version ="2.2 +"href =" http://javadl.Sun.com/webapps/download/GetFile/JavaFX-latest/Windows-i586/javafx2.JNLP "/ > "

  < / resource >

  < resources >

  " < j2se version = '1.6 +' href = ' http://Java.Sun.com/products/AutoDL/J2SE "/>

  < jar href = "Tedros - Box.jar" size = '200921' download 'impatient' = / >

  < jar href = "lib/App-message - Controle.jar" size = "141981" download = "eager" / >

  < jar href = ' lib/Tedros-App - API.jar' size = '116706' download 'impatient' = / >

  < jar href = "lib/Tedros-Core - EjbClient.jar" size = '5185' download 'impatient' = / >

  < jar href = ' lib/Tedros-Core - Model .jar' size = '47516' download 'impatient' = / >

  < jar href = ' lib/Tedros-Core' size = '108000' download 'impatient' = / >

  < jar href = ' lib/Tedros-DataAccess-model - API.jar' size = '13588' download 'impatient' = / >

  < jar href = ' lib/Tedros-DataAccess-Server - API.jar' size = '32124' download 'impatient' = / >

  < jar href = "lib/Tedros - Exception.jar" size = "2624" download = "forward" / >

  < jar href = "lib/Tedros - FXComponents.jar" size = "282972" download = "eager" / >

  < jar href = ' lib/Tedros - Util.jar' size = '15348' download 'impatient' = / >

  "< jar href="lib/commons-collections-3.2.1.jar ' size = download "583672" = "forward" / >

  "< jar href="lib/commons-lang3-3.1.jar ' size = tΘlΘchargement "319222" = "forward" / >

  "< jar href="lib/eclipselink-jpa-modelgen_2.4.1.v20121003-ad44345.jar ' size = tΘlΘchargement "12387" = "forward" / >

  < jar href = "lib/eclipselink.jar' size = download"8449501"="forward"/ >"

  "< jar href="lib/javaee-api-6.0-5.jar ' size = download "989597" = "forward" / >

  "< jar href="lib/javax.persistence_2.0.4.v201112161009.jar ' size = download "128747" = "forward" / >

  < jar href = "lib/jfxrt.jar' size = download"15117378"="forward"/ >"

  "< jar href="lib/openejb-client-4.5.2.jar ' size = download "318492" = "forward" / >

  "< jar href="lib/org.eclipse.persistence.jpars.source_2.4.1.v20121003-ad44345.jar ' size = tΘlΘchargement "65144" = "forward" / >

  "< jar href="lib/org.eclipse.persistence.jpars_2.4.1.v20121003-ad44345.jar ' size = tΘlΘchargement "93694" = "forward" / >

  "< jar href="lib/spring-beans-3.0.7.RELEASE.jar ' size = download "563508" = "forward" / >

  < / resource >

  < security >

  < all-permissions / >

  < / security >

  < width applet-desc = "1280" height = "760" hand-class = "com.javafx.main.NoJavaFXFallback" name = "Tedros-Box" >

  < param name = "requiredFXVersion" value = "2.2 +" / >

  < / applet-desc >

  < jfx:javafx - width desc = "1280" height = "760" hand-class = "com.tedros.Tedros" name = "Tedros-Box" / >

  < audit update 'always' = policy = "always" / >

  < / jnlp >

  I could be wrong, but I don't think that these are not errors. They just say you whence your jar files. In your case, they just cached entries. You probably want to clear your cache. I do this by running javaws - uninstall and then javaws - clearcache

• where are the location server log and the dimension to generate the error file located?

  I am running a build script and I got this error. Can someone tell me the location of the files below? (The server log and Dimnension generate error file)
  
  Construction of Dimension ERROR - 1007083 - failed. Error code [1090004]. Check the ser
  file log of worm and the dimension generate file for possible more info...
  
  Thank you

  I guess you are on Version 11 as your last post was on this version.

  You are customer of the EAS, take a look at \Hyperion\products\Essbase\eas\client
  If you load using maxl you should have a file of errors defined in the script.
  Newspaper to take a look at \hyperion\logs\essbase there will be essbase.log and application logs are lower than for example \hyperion\logs\essbase\app\Sample\Sample.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• LD:0711 - ERROR: file 715 BS - 44048.c cannot be processed &amp; CMDTUX_CAT:1832: UH...

  Hello..
  Use Tuxedo with IBM cobol for AIX 2.0 10.0...
  I tried to build a simple client IBM COBOL with the buildclient command program and got the return code of 4.
  
  After building the client tried to build the server and the return code is 4 for this and after that get these msgs. error.
  (IE. Compilation is over, but I guess that the problem is in the stage of binding edit)
  
  LD: 0711-715 ERROR: file BS - 4f0ce.c cannot be processed.
  The file must be a file object, an import file or an archive.
  CMDTUX_CAT:1832: ERROR: cannot run cobedit-I$ TUXDIR/include - o CSIMPSRV BS - 4f0ce.c - L$ {TUXDIR} / lib CSIMPSRV.cbl TPSVRINIT.cbl - brtl - qstaticinline - lcobatmis - ltux - lbuft-lfml lfml32 - lengine - lpthread
  
  and this .c BS-(a number) is included in buildserver... This number is generated randomly each time... Could someone please suggest a solution for this?
  
  
  Thanks in advance...

  Hello

  In this, I am always dig a little. Can you tell me what level of patch bearing run you? I think you need at least RP016 Tuxedo 10.0 using the IBM COBOL compiler. You can check the patch working capital level by using the-v option for tmadmin.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Error file not found in Temp. Firefox does not start

  When I try to start Firefox (Windows 8.1 desktop computer) I get a full white screen with only the following error message:

  File not found
  Firefox can't find the file at / c; /Users/ username/AppData/Local/Temp/name of file (more than fifty characters long, all the numbers and letters without anything that looks like a real word and ends in /BGAW05 .htm).

  It of only a button to Try Again that never works and some directions to verify the name of the error file, or check if the file has been moved, renamed or deleted. I check to see if the file is no where on C: and it doesn't. It is there no file in Temp even remotely close to that name. I run Firefox with several tabs that are registered and come back when I restart Firefox. So maybe this file in Temp was associated with a deleted tab.

  As I said, this error message comes up full screen, covering the taskbar and not reduce it, restore, close buttons, as if I was running in mode Metro, I never do and will never do.

  Because of this error I can not even start Firefox now, so I had to become a user of Internet Explorer.

  How can I get Firefox to stop looking for this file?

  Any help on this will be greatly appreciated. Thank you.

  I found a solution to my problem. Looking in my info on solving computer problems, I noticed that some problems can be resolved by the administrator. I tried with Firefox and it worked. The only damage was that I lost the current tabs. But Firefox seems to work fine otherwise.

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• 'write on worksheet' VI error: file already open

  I get this error when I write in a CSV file: I save data there permanently... Well, I programmed it stores about 100 points in memory and writes every 100 points.

  When I open the saved file in Notepad for example to preview, Labview returns error "File already open" and so he can't write.

  isn't this weird? aren't you just cached the file when opening information? How can I fix it?

  I use the VI "write on the worksheet.

  Thank you

  Maybe when you get the error, store what you were going to put in this file in memory or a temporary file.  Displays a dialog box that does not stop your program to tell people, don't not to open the file.  When your program detects the file is therefore more open giving the error, and then write about everything that you stored in the memory (or read about in the temp file and write) before adding the latest data to the file.

• Download XPsp3 error 'file corrupted '.

  I ran "SP3: <> http://www.microsoft.com/en-us/download/details.aspx?id=24 ' Microsoft Download site and saved on PC & tried to run. In both attempts, I got an error 'file corrupted '. Is there a suggestions on how to get the update of XP?

  It is reported that security software can inhibit successful installation of SP3. See...

  http://support.microsoft.com/kb/949377?

  Rather that to disable security software, uninstall may be a better choice because some 'disables' is not fully turns off. You already have the SP3 download then try this...

  • Make sure that you have the ability to re - install the security software (re - download or find installers, find a CD etc - also, to study the procedures for this with your provider support pages)
  • Disconnect from the internet
  • Uninstall your security software
  • Install SP3
  • Re-install security software
  • To connect to the internet and do Windows updates and software updates for security

  If you can't count on the possibility of re - install a security software for a reason any then just go with the neutralization of him while applying a SP3.

  You can also read this...

  http://support.Microsoft.com/kb/950717

  Tricky

• Updated MS page error: "files required to use Microsoft Update are longer registered or installed on your computer.

  Original title : Could not get the MS update or reinstalled is recorded on the XP Home SP3 machine

  Problem: MS page update error: "files required to use Microsoft Update are longer registered or installed on your computer.
  Now, I can't verify what has / has not been done!  Updates for years, now he did!

  Sort of bumped into a wall after trying a bunch of stuff. Here's what I've done so far:

  User login was Admin status for all activities tried & emumerees below, the various assignments of site Ms.

  Difficulty of test #1 (software installation)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to install it
  "c:\WindowsUpdateAgent30-x86.exe /wuforce".
  Installation failed with the error number after: 0x8024d007

  Difficulty of test #2 (registers dll files)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to register the dll
  DllRegisterSerer in c:\windows\system32\wuapi.dll failed. Return code is 0x80070005
  DllRegisterSerer to wuaueng1.dll succeeded
  DllRegisterSerer in successful c:\windows\system32\wuaueng.dll
  DllRegisterSerer in c:\windows\system32\dllcache\wucltui.dll succeeded
  DllRegisterSerer to successful wups2.dll
  DllRegisterSerer in c:\windows\system32\wups.dll succeeded
  DllRegisterSerer in successful wuweb.dll

  (checked the version of the file c:\windows\system32\wuapi.dll is 7.4.7600.226 in the system32 directory)

  Difficulty try #3 (MicrosoftFixit)
  MicrosoftFixit50597.msi--> ran, but he did not set

  Ran the Microsoft 1.0.3001.0 Security Scanner - nothing found

  A ran Malwarebytes Anti-Malware 1.61.0.1400 - no malicious items detected

  I have my "WindowsUpdate.log", but don't see a way of fixing here

  Help.

  Hi Dena. Thanks for check up.

  My machine now works. Here's what happened between my last post and the MS update feature works once more.

  I answered my own question about the SubInACL is allowed file to use on my machine. Googling it I found that it is a 'security descriptor and Editing Migration command-line tool' and that it would work on my XP Home edition. So I have done no harm. But he didn't explain why the machine does not respond to a stop command.

  So, with no harm done and an available restore point, I thought that I would see what the SubInACL program since the drive light was working but no message readable in detail until it was over.

  Googling the first line (echo off) in the batch file led me to a MS page that explains the function of command to echo. If I wanted to see out all I had to do was remove the echo off line. So I used Notepad to remove the line and saved the file. Re-run the bat file then produces a flow of lines in the cmd window - moving too fast to read. I got what I asked for but don't want that I really needed.

  Google "screen xp file output. The second Google result was a link to www.microsoft.com/resources/documentation , which explains how to redirect the output of a command file into a text file. So I followed the example and added a ">" and a unique filename at the end of each line. Worked like a charm. Weres big, very big files. All order lines have reported no failure except HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet which had modified 204160 entries and lines 901 has failed. Looking at a small sample of these faulty items, that they seem to belong to my McAfee AV, so I expect them to be special.

  A reboot of the machine successfully. Still didn't update.

  I ran the MicrosoftFixit program with no error reported.

  Rebooted and found the update feature works again. Cross my fingers batch of this next month of MS updates does not return this ghost.

  Hope someone can benefit from my experiences.

• I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup can not continue "when you try to reload windows xp on a computer problem. What should I do?

  I'm trying to "sweep" and reinstall windows XP pro on a computer that has had problems. I get the error ' file \i386\ntkrnlmp.exe could not be loaded error code 32768 is Setup cannot continue to press a button to exit "as soon as I got the boot from the cd (and actually after a long break). Help, please!

  Hello

   
  Try the steps listed in the link below and check if it helps:

  "Ntkrnlmp.exe could not be loaded. The error Code is 7 "Error Message occurs during installation of Windows: http://support.microsoft.com/kb/318729

• During installation - I get the error "file name too long."

  During the installation of the software downloaded to my psc1315v, I get an error "file name too long - {A1062846-0846-427A-92A1-BB8251A91E91} and my sanner will not work."

  OPS: XP 32-bit

  Download file: gc_wo1 - ENU_NB.exe

  Hi gcflost,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=374568&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• When I started &#62; run &#62; ncpa.cpl I get message error "file does not have a program associated with it... »

  XP SP3 with ALL critical & almost all critics not updated.

  I'm trying to follow the instructions in MS Article 871122 OTF Windows to configure my wireless network settings.

  But when I try to... Start > run > ncpa.cpl I get message error "file doesn't have a program associated with it".

  Thank you

  Steve

  HDTV - calibration.com

  Ok.  That's what steps 1 and 2 of the instructions in KB 871122.  You are now up to step 3.

  Now we will solve the problem "file does not have a program associated with it".  Go tohttp://www.dougknox.com/xp/file_assoc.htm .  Read the explanatory text and then click the 5th from the top:CPL file Association Fix download the zip file, extract the reg file, then run it.

  Because this association should not have broken, I suggest that you download, update and run

  Malwarebytes Anti-Malware and

  SuperAntiSpyware

• I get a system error file d3dx9_41.dll is missing when I install Fifa 2012.

  Original title: run error

  Mr President, I am trying to install fifa 2012 but it is showing system error file d3dx9_41.dll is missing on your computer

  Hi buxant,.

  You are able to install other programs on your computer?

  D3dx9_41.dll problems result in one way or another by a problem with Microsoft DirectX.

  I suggest you run the DirectX Diagnostic tool and check if it helps.

  How to determine the version of DirectX using the DirectX Diagnostic tool:

  http://support.Microsoft.com/kb/157730

  Note: check the DirectX features allows for the

  I suggest that you update the display driver, but also install the latest version of DirectX refer to the following Microsoft article:

  How to download and install DirectX: http://support.microsoft.com/kb/179113?wa=wsignin1.0

  Update drivers: recommended links: http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Keep us updated on the status of the issue.