error file name of report with the Chinese Date format

Similar Questions

• CS6 Pshop - alerts at startup; "All readable Documents" do not failing at opening; Format of file name not identical to the list of Format when you save the file

  Just downloaded CS6 Design Standard. System - OS10.6.8 (about to upgrade to 10.8), iMac 27 i5Intel 4core 12GBram clocked at 2.66 Ghz

  Pshop opens, I get three alerts...

  1 - Unable to load module e/s asynchronous activate because does not work with this version of Photoshop

  2. impossible to load the multiprocessor support plug-in because does not work with this version of Photoshop

  3. unable to load the module of FastCore Routines because does not work with this version of Photoshop

  Then asks if I want to be connected to the internet or something like that. Then Pshop opens before even I click OK

  None of them arrived with CS5.5

  I realize that CS6 is 64-bit. I have fixed 32-bit because of the CS5.5 plugins.

  Two questions, I've noticed so far with CS6.

  1. that I open a document, the Enable selection drop down at the bottom of the window is not set to anything. I always selects the Documents readable by all. Not the case in CS5.5, who was always default readable to all documents. Could not find anything in the Prefs to this question.

  2. When you save a document, RGB or CMYK, the drop-size selection are not accurate. The first three or four read properly correlated with the suffix (.jpg, .tif, etc.) in the name of the file at the top of the window. But then the selections later format below one third or fourth read than above the list.

  for example: as a RGB file: economy through BMP indicates even in filename above (.bmp). However, the following below that, Gif, choice still shows as .bmp in filename at the top. And so on down the list. Even with the CMYK file.

  Never seen this in CS5.5.

  When I initially installed CS6, I noticed that only items in the Plugins folder was folder Panels... without other plugins. I thought this to be an error in download of some sort and moved 5.5 database plugins to 6 Plugins folder. Could be the problem? Otherwise, I would have SOME plugins in CS6

  I downloaded CS6 think twice now first has been altered. I used two download options on the Adobe - Akamai and standard page

  Same questions at once. One country replied this to be a problem of plugins. I uninstalled 'after market' 5.5 and 6 SuperBladePro plugins was the only one. CS6 restarted. Still the same problem. Only the elements of Plugins are what came with the program.

  Yes, I think that the problem is caused by putting the cs5 plugins in the folder plugins photoshop cs6.

  Delete the plugins and cs6 should work much better.

  The reason why you don't see the plugins in the plugins folder, it is that adobe installs all the plugins bundled with photoshop cs6 to the necessary folder inside the Adobe Photoshop CS6.app

  and the empty plugins folder that you saw's plug-ins third as SuperBladePro.

• Error decoder IMAQdx configure enter with the Mono10 Pixel Format

  Hello

  I recently encountered the following problem, so I'm trying to capture images across an iPort CL - U3 Pleora USB3 vision.

  "Error 1074360265 occurred at IMAQdx configure Acquisition.vi.

  Possible reasons:

  NOR-IMAQdx: (Hex 0xBFF69037) no decoder available for the pixel format selected. »

  I always get this error when I switch the 'Pixel Format' to 'Mono10 '. In my images, I use 'Type of Image' 'levels of gray (I16).

  My test code works very well for 'Pixel Format' "Mono8" but not others.

  It is also important to note that in MAX, with 'Levels of gray (I16)' and 'Mono10', it works fine as well.

  Any help will be appreciated.

  Thank you

  Harry

  Have you changed the type of image requested the default value of 'Auto' to 'Gray levels (I16)' at some point? If you have changed this setting in MAX, and recorded, which would explain the error you see. Your code is only to change the pixel format, and there is no decoder available inside the IMAQdx which takes a Mono8 image and returns an image I16 (you would have to project the image with screws of the Vision).

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• During installation - I get the error "file name too long."

  During the installation of the software downloaded to my psc1315v, I get an error "file name too long - {A1062846-0846-427A-92A1-BB8251A91E91} and my sanner will not work."

  OPS: XP 32-bit

  Download file: gc_wo1 - ENU_NB.exe

  Hi gcflost,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=374568&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Oracle WebLogic Server 11 g 1 material (10.3.6) the file name is different in the site and while his error getting buildstage

  Hi all

  I downloaded Oracle EBS https://edelivery.oracle.com/EPD/ 12.2.0 and selected for "outsourced manufacturing and Oracle for discrete Industries R12.2 V5 (12.2.3) v1, Linux x 86-64" on the page

  downloaded the files required for the staging area, in the Linux x86_64 gave error for "file name V29856 - 01.zip Oracle WebLogic Server 11 GR 1 material (10.3.6) Generic and coherence but on oracle delivery page, I can only find Oracle WebLogic Server 11 GR 1 material (10.3.6) and coherence for the file name of Linux x 86" : V29851 - 01.zip which is already uploaded on the stage space, how can I find the file in the site or should I rename to V29856 - 01.zip you please help me on this problem.

  Thank you

  JAI Srinivas.

  Srinivas,

  I think I got an idea after reading it several times

  This is what I understood

  checksum is a failure, so you use version 12.2 Overview disk file (1320300.1) to find which zip file must be downloaded. The overview shows V29856 - 01.zip downloaded but delivery file only has V29851 - 01 V29856 - 01.zip instead.

  I remember something like downloaded this sometimes return that I did checksum digest view used to check the integrity of files and went ahead with the buildstage.sh script to build the stadium. I have been able to complete installation without problems.

  You could try the same thing or try to rename as you suggest.

  I also recommend to contact support so that you will be clear and they will get to know.

  Concerning

  SANAE

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to download the audio book gives the error "the version of this file is not compatible with the version of windows your race."

  frustrated, the overdrive software download player!

  I tried everything I can think of to download this audio book. whenever I try, I get a message error that says "the version of this file is not compatible with the version of windows your race. check the system and see if I need a 32 or 64-bit and contact the software publisher. "or something like that. I downloaded the overdrive media console software, but every time that I try to download an audiobook, it gives this message. I tried to change the settings with the "use an older program with this version of windows' software overdrive console in Control Panel with no luck. Anyone have any suggestions. I need help please!

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  How can I select the files in a folder with the help of a list with the files you want and after that rename only the files using another list with desired new names?

  I have only:
  D: / images (where are necessary + not need files)
  -a list with only the necessary files
  -a list with new names for the files needed
  Thank you.

  Hi Pustiu,

  Thanks for posting in the Microsoft Community.

  You want to know how to select the files in a folder using a list with the files you want and after that rename only the files using another list with desired new names.

  I would have you post your query in the TechNet forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Player error"the version of this file is not compatible with the version of Windows that you are using"

  Original title: need help with Windows Media Player.

  Whenever I try to start Windows Media Player, in my laptop, I get this message... "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I use Windows 7 (Ultimate) 64-bit. I tried to download WMP 64 bit, but could not download. I have evven I tried microsoft solve this problem, but in vain.

  Please, someone help me out here, with WMP.

  Thank you, in advance.

  This procedure has helped most users facing this problem.

  1. Reboot your system.
  2. Open cmd.exe as an administrator by selecting Start Programs/Accessories.
  3. Right-click on command prompt and choose Run as administrator.
  4. Type in
     Unregmp2.exe /UpdateWMPVersion
  5. Press ENTER.

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using Vista Home Premium 64 x. In Windows Explorer how to group by name to display with the simple letters like A, B, C, D, etc. instead of A - H, P, Q - Z?

  Original title: group Windows Explorer by name

  Using Vista Home Premium 64 x.  In Windows Explorer how to group by name to display with the simple letters like A, B, C, D, etc. instead of A - H, P, Q - Z?  In XP, it could be sorted by simple letter, which makes it easier in a folder with many files.  Thanks in advance.

  Hi kmcmi,

   

  Welcome to Microsoft Answers Forums.

  Well this feature is not available in Windows Vista.

  It only works on Windows XP.

  I've added a useful link

  Behavior and change folder views

  http://windowshelp.Microsoft.com/Windows/en-us/help/3a3bfe59-5268-4FB3-81c5-7972c28939cd1033.mspx

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The version of this file is not compatible with the version of windows you are runing problem.

  IM facing problem installing some software: the error message is below to:

  The version of this file is not compatible with the version of windows that you are running, check your computer's system information to see whether you need a x 86 version or x 64 of this program and then contact the software publisher

  

  while trying to change the compatibility to windows 7 option does not appear

  

  Windows 7 will not be included within the compatibility list, because you are already using Windows 7. Your only option is to contact the Publisher of software (the company that built the program) and get a version that works with your computer type (64 bit or 32 bit, whichever one you have).