[Error had occurred and could not activate the selected cartridges.]

Similar Questions

• Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/li

  Hello. I have the CC of LR 2015 version. It downloads fine, but when I try to open the application, I get a message saying: "an internal error has occurred" and "could not create the required folder: / users/celinserbo/library/application support/adobe/lightroom/develop presets." I tried disconnecting and then signing unistalling the app and back in and resettlement. nothing seems to work. any help would be appreciated.

  Cannot create the folder means that you don't have WRITE permission for this folder. Then... change your permissions.

• I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "E Yes

  I installed Adobe Lightroom CC.  Launching, a popup appears, which says: "AN INTERNAL ERROR has OCCURRED.  Could not create the required folder: /Users/(my user name)/Library/Application Support / Adobe / Lightroom / develop Presets. "So even if Lightroom CC is installed, it will not launch.  What should I do to allow him to launch?

  I had the same problem, just bought a new Macbook Pro (June 2015) and Lightroom CC had this error as well.  Here is the dialog box that I've had with Adobe, and it cures the problem:

  Adobe: Please click on the search option in your Dock at the bottom of the screen.

  Adobe: Then click GO on the MenuBar at the top of the screen.

  Adobe:, and then click GO to folder, and then type: ~/Library/Application Support/Adobe /.

  Scott: OK, I did

  Adobe: Control-click on the folder and choose read information.

  Adobe: Expand the section sharing & permissions.

  Adobe: Click on + icon, and check if the administrator select

  Scott: OK, I chose the Admin

  Adobe: Give read and write to the Admini

  Scott: completed

  Adobe: Click the gear icon and select apply changes to included items

  Scott: OK

  Adobe: In the Finder window, click GO and select GO to folder

  Adobe: Type in
  Adobe: / Library/Application Support/Adobe/ and press enter

  Scott: completed

  Adobe: Control-click on the folder and choose read information

  Adobe: Expand the section sharing & permissions.

  Scott: ok

  Adobe: Give read and write permissions to all users

  Adobe: Then click on the sign + and add the rest of the users from the list

  Scott: completed

  Adobe: Now, please try to use the Lightroom from your computer.

  Scott: Thank you - it works!

  Hope this helps others.

• Could not activate the integration features

  I clicked on start > all programs > Windows Virtual PC > Windows XP Mode.  Instead of loading Windows XP in the VM, I get an error message that says "could not activate the integration features", which would cause this error message?

  MLMH

  I just had the same thing happen. When I chose to continue, I got was a black screen and no option to enable the integration features.

  I found the settings screen for XP Mode via the start menu, all programs, Windows virtual PC, Windows Virtual PC. Right-click on the Virtual PC icon in windows, and then select settings. Select close and then change close automatically with the following measures: to Hibernate to stop.

  When I closed the window the next time xp mode, he asked me if I really wanted to force the shutown of the window, I said yes. The next time I started windows xp mode it came and all my programs were OK...

  Hope this helps

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• How to activate bluetooth Qualcomm Atheros AR3012 on laptop Asus when "Windows could not activate the device (the function of bluetooth?

  airplance mode: off

  WiFi: connected.
  Bluetooth: off
  Ultrabook ASUS, bought on 14 April 2013
  Qualcomm-Atheros Bluetooth 4.0 AR3012 + HS
  Unable to activate the device.
  Basic troubleshooting done:
  1. reboot the PC
  2. activate and deactivate the airplance mode
  3. put updated driver
  Impossible to activate bluetooth
  error message: windows could not activate the device.
  tried steps 1-3 again me. same message showed.
  no other device is connected via USB when trying to enable bluetooth.
  known issue after removing antivirus software and install another antivirus software. but now I'm running on windows Defender.

  Hello

  Thank you for the update.

  As none of the above suggestions work, I suggest you to contact the Asus support for any future reference.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  Feel free to contact us for any other questions related to Windows.

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• "could not activate the integration features" on virtual PC

  My host is running Windows 7. my virtual machine has XP Pro. It worked, but now when I try to run it in XP Mode I get the message "could not activate the integration features. When I click to go forward in any case, I get a black window with a slider _ and nothing doesn't work to open my virtual machine.

  Hi Randall,.

  Since the problem is related to the Windows XP Mode, I suggest you post your question in the below related forums.

  Windows Virtual PC and XP Mode Forum

• DB Link error: ORA-12154: TNS: could not resolve the connect identifier specified

  Hi all

  We need to make an entry in the tnsname.ora file in a local database to connect to the remote database using db link?

  Here is my code: -.

  create the database link * _DBLINK

  connect to the USER IDENTIFIED BY 'user '.

  using '(DESCRIPTION =)

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))

  )

  (CONNECT_DATA = (SERVICE_NAME = REM)

  )';

  After the creation of the DB connection when I'm trying to run select 1 of dual@***_DBLINK

  He throws me an error ORA-12154: TNS: could not resolve the connect identifier specified

  Am I expected to do an entry in the file tnsname.ora for "REM". I don't remember making any changes in the file tnsname.ora for the creation and access of the remote database via dblink.

  Help, please.

  Thanks in advance.

  2925917 wrote:

  Hi all

  We need to make an entry in the tnsname.ora file in a local database to connect to the remote database using db link?

  Here is my code: -.

  create the database link * _DBLINK

  connect to the USER IDENTIFIED BY 'user '.

  using '(DESCRIPTION =)

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))

  )

  (CONNECT_DATA = (SERVICE_NAME = REM)

  )';

  After the creation of the DB connection when I'm trying to run select 1 of dual@***_DBLINK

  He throws me an error ORA-12154: TNS: could not resolve the connect identifier specified

  Am I expected to do an entry in the file tnsname.ora for "REM". I don't remember making any changes in the file tnsname.ora for the creation and access of the remote database via dblink.

  Help, please.

  Thanks in advance.

  I've learned to trust in your obfuscation you covered something important, or you are showing some apples and oranges.  Error to declare you come from not being able to find referenced in tnsnames.ora entry, but the way you say you created your link db, you hardcoded the entire connection, so he never users tnsnames.ora.

  I would change the definition of db_link

  create the database link * _DBLINK

  connect to the USER IDENTIFIED BY 'user '.

  using "REM."

  Then create an entry in your tnsnames.ora

  REM =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = *. *. *. *)(PORT = 1521))

  )

  (CONNECT_DATA = (SERVICE_NAME = REM)

  )

  )

  Also, use server name instead of the HOST = IP address

  The closer looks that you can miss brackets final closing on your original definition.

• Lightroom error message could not prepare the selected file to/volumes/etc...

  IMac OS X using Lightroom 6 10.9.5,, try to edit the photo in another application (photoshop elements / Nik silver efex pro 2 etc.) via Photo > edit in >... Error message "Lightroom could not prepare the selected rule to / volumes/etc.". (the folder where the file is located) ». Have followed all instructions / suggestions so far. Nothing has worked. Having installed and uninstalled and installed all the app:s for several times now.

  What to do next? It seems fitting that Lightroon does not allow me to use a surface-mounted.

  Hi juhamar,

  It seems that you don't have permissions on this site for Lightroom create any file.

  Please provide permissions for reading and writing at this location.

  Let me know if it helps.

  ~ UL

• I have a trial version of Illustrator and could not find the pencil tool.  How can I add it to the toolbar?

  I have a trial version of Illustrator and could not find the pencil tool.  How can I add it to the toolbar?

  It is in a group with the Shaper tool

• Satellite L500D - Iinitially had a problem "could not load the profile.

  Satellite L500D initially had a problem 'could not load profile' then stop. It is now the windows installation discs that I don't have. Where can I get them? They can be downloaded from Microsoft or Toshiba sites?

  Error message:
  File: \boot\BCD
  Status: OxcOOOOOOf
  Info: an error occurred while trying to enter the boot configuration data

  ANY HELP WILL BE GREATLY APPRECIATED THANKS

  Hey Buddy,

  > They can be downloaded from Microsoft or Toshiba sites?
  No, the disc can t be downloaded because it s not for free.

  You can start in safe mode?

  In the worst case operating system is confusing to the top and you have to reinstall Windows, but so you can take the Toshiba Recovery disk that will restore your notebook back to factory with all the drivers and tools of Toshiba.

• DB Link error: ORA-12154: TNS: could not resolve the connect identifier...

  All,
  
  Help, please. I get the error above despite all I know to do:
  
  tnsnames.ora entry for the remote database (it is what is on the local database):
  
  ORACLE6. STAGING =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = oracle6.staging.hobank.net) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = banksys))
  )
  
  
  The following works without problems of local database to a remote database:
  
  On the local database:
  
  sqlplus kay/[email protected]
  ...
  ...
  
  Connected to:
  Oracle Database 10 g Enterprise Edition Release 10.2.0.2.0 - 64 bit Production
  With partitioning, OLAP and Data Mining options
  
  SQL > select * from emp;
  
  EMPNO, ENAME, JOB HIREDATE SAL COMM MGR
  ---------- ---------- --------- ---------- --------- ---------- ----------
  DEPTNO
  ----------
  2 Kay Baffy DBA 1 6 November 10 50000.25
  2
  
  * These data are correct and comes from the remote database *.
  
  Next, I created the database link that is connected to the local database:
  
  create the database public link oracle6.staging
  connect to identified by kay kay
  using 'oracle6.staging ';
  
  Database link created.
  
  !!! But the following does not work:
  
  SQL > select * from [email protected];
  Select * from [email protected]
  *
  ERROR on line 1:
  ORA-12154: TNS: could not resolve the connect identifier specified
  
  
  I am sure of the following:
  
  1 DB link has been created on the local database.
  2 oracle6.staging entry is tnsnames.ora
  3. I am able to connect to a remote database with: sqlplus kay/[email protected]
  
  * Any help will be be appreciated.* *.
  
  Thanks in advance.
  
  Baffy

  See the link:-hope, it will be useful for you.

  Troubleshooting of database links
  http://www.akadia.com/services/ora_dblinks.html

  Kind regards

• VISTA administrator accounts disabled. Could not activate the hidden admin

  HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user?

  Thank you
  Ganesh

  HI - all my VISTA administrator accounts are disabled. I could not allow the hidden administrator because it requires an active administrator. Can you help me create an admin user?

  Thank you

  Ganesh

  Sorry, if you are not set up as an administrator user account, you cannot enable the built-in administrator.

  This forum prohitbits someone help users to bypass the password protection, regardless of the reasons.

  This is the policy of the forum:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Why this warning occurs? "Could not complete the move to folder. An unknown error has occurred. »

  This warning appears from time to time as I migrate my photo folders LR 3 from an internal hard drive on an iMac to a hard drive external. Folders and images appear on the external hard drive OK and are accepted by the LR database 3 A greyed with zero files folder remains behind on the internal hard drive in the application of LR 3 file.

  Phil McAlary
  

  I discovered in at least one instance a folder of images with this warning had given no graphics inside this particular file (a file processing rich text reminding me to use some of the images in the folder). Will need to check the ten to twelve other files (migrated files that triggered the alert "cannot complete the move to folder. An unknown error has occurred. ") via the Mac Finder to see if a non file / unrecognizable remains behind in these records.

  Phil McAlary