Similar Questions

• WdiServiceHost does not get the error code 5 access denied

  Diagnostic Service Host System (WdiServceHost) has been unable to restart when you try to restart maintain error code 5 access denied. How to restart the Service

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Some services do not start in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/943996

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Cannot delete video files. Error "Destination folder access denied".

  Cannot delete files on Vista Ultimate vidoe as owner/administrator.

  I am the owner and administrator of my laptop and a single user. I am running Vista Ultimate. I have video files, that I can't remove. In the Properties window, it says I have full access and permissions for the files and folders. However, I get the message "Destination folder access denied."  Or "you must be authorized to perform this action." I get the window with the options RETRY or CANCEL. So boring. Any help would be great. I'm not a pro with computers, but know my way around the essentials. Step by step would be great. Thank you!

  Hi David,

  ·         What is the location of these files?

  Try the following.

  Method 1: Check if you can change the location of the files and then remove them.

  Method 2: Start the computer in safe mode and try to delete the files.

  Method 3: Check to see if this article helps you.

  Troubleshoot "access denied" when opening files or folders

• When you try to cut, copy, or delete on the external drive, get the error "Destination folder access denied. You must be authorized to perform this action. »

  When I try to create a folder, or cut, copy or delete anything on any external drive, the message "Destination folder access denied. You need permission to perform this action. "and by clicking on try again once he simply repeats. These drives work fine on any other system

  Appropriating the reader.

  How to take ownership and grant permissions in Windows Vista
  http://www.mydigitallife.info/how-to-take-ownership-and-grant-permissions-in-Windows-Vista/

  Instead of right clicking on folders, right click on the drive.

• Why the VBA code is not loading or saving an XML document in Windows 7 64 bit with this error: runtime error '-2147024891 (80070005) ' access denied

  Hi all

  I have a VBA program that worked like a charm on Win XP. I just installed on my Windows 7 computer. It installed fine but when I try to run it, it fails on the line where it tries to load an XML file with the following error:

  Runtime error '-2147024891 (80070005) '.
  Access is denied

  I've been reading about problems with msxml and Windows 7 but cannot figure out what to do. Any help would be greatly appreciated.

  I have.

  p.s. I suspect that the file in the C:\windows\system32 directory msxml might hae been overwritten with an older version during the installion. Can someone tell me how to find out?

  iikenze

  Please post your question on VBA to Visual basic for Applications Forum MSDN.

  http://social.msdn.Microsoft.com/forums/en-us/isvvba/threads

• Error code O9XNZMXB - access denied for briefing

  I gave access to information books to a user through the manage privileges. However, this user always gets the error:
  O9XNZMXB - access is denied for the user/users/ABC/_briefingbook path
  
  Can anyone help? We created groups with the same name as the user ID.
  
  Peppy

  So, you got your answer?

  If not then to delete the user ABC Catalog Manager Help and ask the user to sign in again as it will create a new folder with default privileges or click this user and then set permissions recursively for its ID

• EXEC System ERROR 1045 (28000): access denied for user 'ODBC'@'localhost' (password: NO)

  I am dynamically creating a MySQL database from a SQL script file, when I call the Exec VI system I get the above error

  my order entry looks like this:

  "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysql.exe"

  my standard input entry looks like this:

  "- defaults-file = C:\ProgramData\MySQL\MySQL Server 5.5\my.ini"uroot -""-Ppassword.<>

  If I paste the entire command in a CMD window, it works very well, my db is created (all quotes are included)

  If I try to convey the just the input of the command mysql simply view help info - no error.

  someone has an idea how I can get this working?, oh I'm using LabVIEW 2011 SP1

  TIA

  Hi DogOnWood,

  LabVIEW inserts the default escape characters in string constants.  This can be change your chain one waited one way when it goes off at the command prompt.  Try right-clicking on the string constants that you are entered into the system Exec VI and turn it on '-' option to display Codes on the shortcut menu.  Look carefully at how the escape codes are used to ensure that the correct channel is sent to the command prompt.

  When you use options as a result of a call to an exe file, a common method that works for people is to create a batch file with the file name and the options specified on the inside.  You can then call the file of commands directly from the system Exec VI.  This is described in the system Exec VI Help file:

  «To run an executable with options by using the syntax filename.exe - option1-option2, create a fichier.bat that calls the executable with the syntax of options and use this VI to call the fichier.bat.»

  In this case, you can programmatically create a batch file using the writing of text file VI first with your orders and then use system Exec to run the file:

  Write to help the text file - http://zone.ni.com/reference/en-XX/help/371361H-01/glang/write_characters_to_file/

  Ideally, we recommend the Database Connectivity toolkit for LabVIEW use to connect to databases, as he takes care of all that for you.  You can find more information on it here:

  Database connectivity - Kit http://sine.ni.com/nips/cds/view/p/lang/en/nid/209060

  Kind regards

• Activating Windows error «0xC000002 access denied»

  Original title: activate Windows.

  So some time ago I was having problems so I wiped my computer, now I want to activate windows. I received my product key, but every time I go it it gives me a few different error messages:
  0xC000002
  Access denied
  A process has requested access to an object, but has not been given these access rights
  0xC002001B
  The remote call procedure failed

  I made CPP runs by setting the Auto value and pushing to start and he explains how it works, but I don't know what else to do. I'm not good with computers, so I'm out of my League and I'm tired of Windows 8. If someone could please help.

  Oh and when I push the button of windows turn on and activate the windows screen it says check this key pour.0001 a second then closes and before I touvh nothing above the key it said activation not found error description.

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Access denied make sure that the drive is not full or write protected

  Original title: when insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected
  When insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected

  Hello

  Thanks for posting the question in the Microsoft Community Forum.

  Will guide us in the question.

  You can try the steps and check if you are able to copy a file from computer to the USB key.

  Method 1:
  You can try to copy the file on computer for USB in SafeMode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2:
  You can try the steps in the article to (KB) knowledge base and check if it helps:
  Error message when you try to delete a file in Windows XP: "access denied".
  http://support.Microsoft.com/kb/298345

  Reference link:

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/?kbid=308421

  Hope that the information provided is useful.

  If you need further assistance, please answer and we will be happy to help you.

• ACCESS DENIED WHEN YOU TRY TO SET THE AFFINITY OF THE PROGRAM.

  Hi people, this is my first post here. I have searched the forum for an answer but couldn't find it so please forgive me if I missed it and write the question again.

  I'm trying to get better performance from my pc. I am running a quad core C.P.F. and try to set the affinity for certain programs are not not multi thread. (PC ONLINE EVERQUEST GAME 2)
  I managed to channel some programs, but when I try to set the affinity for Everquest I comes up with an error message.  'ACCESS DENIED '.

  I found a page that had a work around, but I could not quite work on what they were saying.

  If you know an easy way to do it could you help me please.

  Thanks for your time :)

  Hi Dagenham Dave,

  You run the computer as an administrator?

  You can follow the steps indicated by the msspbm, which addresses a similar issue, please see the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a6a57cda-3f2c-48b2-ae8e-42c5965567bb

  This may interest you

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  Please post if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• File Sharing - access denied

  I have a small network (no domain server) with 3 desktop computers, all connected to the same switch:

  Computer #1) Windows 7 32 bit.
  Computer #2), Windows 7 64-bit.
  Computer #3) Windows 7 64-bit.
  I'm having problems trying to navigate between computers, readers:

  	Computer 1	Computer 2	Computer #3
  Computer #1:		Error: 8004005	Access denied
  Computer #2	Access OK		Access denied
  Computer #3	Access OK	Access OK

  Computers 1 & 2 get Access Denied errors when I enter the valid administrator ID/PW

  * I tried to turn off the Windows Firewall.
  * I allowed network discovery, file and printer sharing and the possibility of using accounts of users & passwords for you to connect to other computers in the 'Center of network & share '.
  * In each case there was an error "Access denied" when prompted, I used the id/password admin for the destination computer.
  * All 3 computers WAS part of a group of houses, but none are now part of a group home.
  Any ideas as to why I get 'Access denied' with the admin ID/PW?
  Thank you

  Take a look at this discussion.

• computer will not start the service, access denied

  I installed this windows service: http://code.msdn.microsoft.com/windowsdesktop/CppWindowsService-cacf4948

  and when I try to start the service in the GCS I get the error 5 error message: access denied
  my account is set to admin and I even tried to use the default admin user, but still it will not work

  Hello

  From the description above, you get the error code 5 access denied cannot start the service.

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  Method 2: I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Post us the results once you try the steps above.

• Support Program (OCP) Certification Oracle (access denied) form

  Hello

  I'm trying to post a question in the form of support for the program of Certification Oracle (OCP), but I get the error below:

  Access denied

  You do not have permission to access to " " http://education.Oracle.com/pls/eval-eddap-DCD/ou_support_ocp.submit_sr "on this server. "

  Reference #18.9fd8f648.1412697561.162986c1

  
  

  Thank you

  Hello

  The problem was the firewall. Problem solved!

  Thank you

• Access denied ("java.util.PropertyPermission" "user.timezone', 'writing') [WINDOWS 7 64 bit]

  Hello

  that we got on several computers, the error message

  
  

  access denied (java.util.PropertyPermission""user.timezone', 'write')

  When we try to open an internal Web site. Until today, that everything worked well.

  An update of Java for windows 7 64, Version 7 45 update does not resolve the problem.

  I tried to set the Java security permissions in the control panel to the Middle, but it also did not work after this change.

  We also got this problem on another computer when you try to open an external site that also use the Java.

  Someone has any idea how to solve this problem?

  Hi guys.

  I solved the problem by adding a rule to the following file

  $JAVA_HOME\lib\security\java.policy

  grant {}

  ...

  permission java.util.PropertyPermission "user.timezone", "write";

  };

  After that I killed the java process and rebooted. The problem disappeared

• access denied to download acrobat 10

  I get the error message:

  Access denied

  You do not have permission to access to " " http://trials2.adobe.com/AdobeProducts/Acro/10/Win32/AcrobatStd_10_Web_WWEFD.exe ? "on this server. 

  Reference #18.74bb97d8.1391391721.63b98f

  What is c?

  If you tried to download via the website ProDesigntools, you will need to follow to the letter the very important, otherwise the download will fail.  You can get a message such as the one you posted, or you can get the download for the latest version instead.