Error in bps

Similar Questions

• Request close does not correctly after the addition of SceneCover (QML)

  Just added a SceneCover exposed to QML, wanted to change my implementation of shit,

  Page {
  
      onCreationCompleted: {        Application.setCover(sceneCover)    }
  
    attachedObjects: [
  
        // An Active Frame is a Scene Cover      SceneCover {          id: sceneCover          content: Container {              background: Color.create("Black")          }
  
        },
  

  
  #include "applicationui.hpp"
  //#include "ActiveFrameQML.h"
  
  #include 
  #include 
  #include 
  #include 
  #include 
  //#include "OrientationSensor.hpp"
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
          QObject(app) {
      displayInformation = new si::blackberrydev::DisplayInformation;
      qmlRegisterType("bb.cascades", 1, 2, "SceneCover");
      qmlRegisterUncreatableType("bb.cascades", 1, 2, "AbstractCover", "");
      // Create scene document from main.qml asset, the parent is set
      // to ensure the document gets destroyed properly at shut down.
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      // Create root object for the UI
      qml->setContextProperty("display", displayInformation);
      AbstractPane *root = qml->createRootObject();
      // Set created root object as the application scene
      Application::instance()->setScene(root);
  }
  

  Now, whenever the application closes, it does and does not correctly close until terminated manually:

  

  It does not show this on the console but I'm not a clue what he is to me: "0x85ab510 error: must be attached to a control, no bb::cascades:QmlPage (0x85269a8).

  Any Suggestions?

  10.2 minimum API level targeting

  I noticed that, while this works, attaching class SceneCover application directly gives an error of bps to the exit event.

  To avoid this error, set the class of SceneCover via ComponentDefinition and attach it to the Application class.

  I have attached a code snippet below:

  onCreationCompleted: {
      Application.setCover(sceneCoverDef.createObject())
  }
  attachedObjects: [
      ComponentDefinition {
          id: sceneCoverDef
          SceneCover {
              content: Container {
                  background: Color.create("#000000")
                  Label {
                      text: "hello"
                  }
              }
          }
      }
  ]
  

  Try and see if the error persists.

• sbRIO-9651: FPGA RS-485 baud rate 230400 beyond? Error-1073807330

  I use a sbRIO-9651 and drop the CLIP of FPGA in "Other devices" it shows six Serial1 serial ports... Serial6. The first four are described as "RS-232 serial Port" and the two last "RS-485 Serial Port".  On Serial6 (RS-485), I have configured the TX, RX and TX pins activate.

  In my .vi on real time, I put my "VISA set up a Serial Port (Instr) .vi" with a baud rate. A works 115200 or 230400 baud rate, but the pace I want to use (256000) generates a run-time error.  "Error-1073807330 VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource."

  I suspect the FPGA hardware is capable of 256 Kbps, but I know that if it is a fundamental limitation of the NI UART IP block, or some places I have to change to allow a wide range of transmission speeds (?)

  Hello

  The maximum rate for these serial ports is 230 400 bps, so there is a limitation on the connection of the UART.  In the manual, you will find more specific information if you need it!  http://www.NI.com/PDF/manuals/376962c.PDF#page=8

• Cannot create a disk image. Error: 0x80780002a and 0x8007045d.

  I just got a wd passport ultra. When I try to make a disk image of my hard drive I get the error messages

  ox80780002a and ox8007045d. What can I do? do I need to format the external drive.

  Thank you very much for your help

  Pedro

  If the new HARD drive is formatted using 4 096 bytes per sector that poses problem.

  Microsoft has not started taking charge of system images on hard drives with 4096 bytes per sector up to what Windows 8.

  To see what you have, follow these steps:

  Click on the round starting and in the type box:

  order

  Click with the right button on command prompt and choose Run as administrator to open a command prompt window and enter the following command to the drive letter of your new (I use D drive so you put in your drive letter):

  fsutil fsinfo ntfsinfo d:

  Watch them bytes per value of industry and whether it is 4096 that is the problem.  Windows 7 supports only 512 bytes per sector as in this example from my D drive which contains 512 bytes per sector (this will not work):

  

  In this example the Bytes per sector is 512 MB then it will work well for the Image of the system.

  What is the Bytes per sector on your new HARD drive?

  If the bytes per sector on your new drive is of 4096 you will reformat to 512 bps, use a different HARD drive or a program that takes in charge 4096 bps third.

  You can read more here:

  https://support.Microsoft.com/en-us/KB/2510009

  There is an update "too complicated for me" that might work, but I can't test it - it's too complicated for me:

  https://support.Microsoft.com/en-us/KB/982018

  Western Digital has tools to help you, and since you know what the problem is I suggest you keep things in their community to ensure you get the best advice (there are no good tips from Microsoft):

  Here's the WD community:

  https://community.WD.com/

  WD also has a quick format module that may be useful (never used, none of the examples, etc.).

  http://support.wdc.com/knowledgebase/answer.aspx?ID=3868

• ANE BB10: error 3500 "the context of the extension has no method '.

  I tried this on the Simulator and the device, and I get the error no matter what:

  ArgumentError: Error #3500: The extension context does not have a method with the name init.
      at flash.external::ExtensionContext/_call()
      at flash.external::ExtensionContext/call()
      at com.o2interactive.sensor.gps::GeolocationExt()
  

  Have you:

  this.ext = ExtensionContext.createExtensionContext( 'com.o2interactive.sensor.gps', null );
  this.ext.call( "init" );
  

  In ContextInitializer donkey:

  const char *functionNames[] = { "init", "gpsStart", "gpsStop", "gpsSupport", NULL };
  FREFunction functionPtrs[] = { init, gpsStart, gpsStop, gpsSupport, NULL };
  

  Just dones not like when I call anything that has been mapped.

  Any suggestion is appreciated.

  The mistake of 3500 a do because the "bps" library is not linked with your application. You have to do to "[all Configuration]" or you will get the error even depending on your deployment. This changed in the latest version of the IDE (thanks to RIM which helped to discover this).

  * C/C++ build / Configuration settings: [configurations]

  * Select QCC Linker / library.

  * Under libraries (-l) 'Add' /'s.

  

• Problems with BPS

  I have a utility class that I use in my application. This utility class give me information on the device and his son in this utility class include a method returns if the device has or no internet access.

  I use the code in the tutorial BPS and take the class StatusEventHandler to my application. However, I had problems when compiling in this line:

  signals:
  void networkStatusUpdated (bool status, type QString);

  He only told me that there was a syntax error...

  I am also in the console:

  o-g/.obj/moc_BlackBerry10Utils.o: In function 'BlackBerry10Utils::qt_static_metacall(QObject*, QMetaObject::Call, int, void**) ':
  C:\Users\ybracho\ndk-10.1.0-workspace\ProfitMovil\x86/o-g/. MOC / moc_BlackBerry10Utils.cpp:49: no reference to "BlackBerry10Utils::networkStatusUpdateHandler (bool, QString) '.

  A trick to solve this problem?

  TIA,

  You are missing a second settler within names for the AbstractBpsEventHandler.

• reading Mp3 error

  Hello

  I just try to add sounds in my game, took example playAudio Ndk samples.

  created two simple ethical methods are the same that in the sample, but still get error could not open source.

  Here is my code

  MySoundPlayer.h

  /*
   * MySoundPLayer.h
   *
   *  Created on: Jul 13, 2012
   *      Author: vivek
   */
  
  #ifndef MYSOUNDPLAYER_H_
  #define MYSOUNDPLAYER_H_
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include "types.h"
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  #if ! defined(DEFAULT_AUDIO_OUT)
      #define DEFAULT_AUDIO_OUT "audio:default"
  #endif
  #define MSG_SIZE 1024
  
  class MySoundPLayer {
  public:
      MySoundPLayer();
  
      bool loadSound(const char * Url);
      void playsound();
      void mmrerror( mmr_context_t *ctxt , char *errorMsg);
      float volume;
      mmr_connection_t *connection;// = NULL;
      mmr_context_t *ctxt;// = NULL;
      char msg[MSG_SIZE];
  
      virtual ~MySoundPLayer();
  };
  
  #endif /* MYSOUNDPLAYER_H_ */
  

  and CPP

  /*
   * MySoundPLayer.cpp
   *
   *  Created on: Jul 13, 2012
   *      Author: vivek
   */
  
  #include "MySoundPLayer.h"
  
  MySoundPLayer::MySoundPLayer() {
      // TODO Auto-generated constructor stub
  
  }
  
  MySoundPLayer::~MySoundPLayer() {
      // TODO Auto-generated destructor stub
  }
  
  bool MySoundPLayer::loadSound(const char * Url) {
  
      const char *ctxt_name = "testplayerr";
      const char *audio_out = "audio:default";
      const char *input_type = "track";
      char cwd[PATH_MAX];
      char inputurl[PATH_MAX];
      int audio_oid; //outputId
      const char *audioout = NULL;
      const char *mmrname = NULL;
      getcwd(cwd, PATH_MAX);
      int rc;
      rc = snprintf(inputurl, PATH_MAX, "file://%s%s", cwd, Url);
      if (rc > PATH_MAX - 1) {
          printf("File name and path too long");
      }
      mode_t mode = S_IRUSR | S_IXUSR;
      strm_dict_t *aoparams = NULL; // output parameters
      audioout = DEFAULT_AUDIO_OUT;
      const char *inputtype = "track";
      if ((connection = mmr_connect(mmrname)) == NULL) {
          snprintf(msg, MSG_SIZE, "mmr_connect: %s", strerror(errno));
          return false;
      } else if ((ctxt = mmr_context_create(connection, ctxt_name, 0, mode))
              == NULL) {
          snprintf(msg, MSG_SIZE, "%s: %s", ctxt_name, strerror(errno));
          return false;
      } else if (audioout
              && (audio_oid = mmr_output_attach(ctxt, audioout, "audio")) < 0) {
          mmrerror(ctxt, msg);
          return false;
      } else if (aoparams && mmr_output_parameters(ctxt, audio_oid, aoparams)) {
          mmrerror(ctxt, msg);
          return false;
      } else if (mmr_input_attach(ctxt, inputurl, inputtype) < 0) {
          mmrerror(ctxt, msg);
          return false;
  
      } else if (mmr_play(ctxt) < 0) {
          return false;
          mmrerror(ctxt, msg);
      }
      printf("Success :%s", msg);
      return true;
  }
  
  void MySoundPLayer::mmrerror(mmr_context_t *ctxt, char *errorMsg) // const char *errmsg )
          {
      const mmr_error_info_t *err = mmr_error_info(ctxt);
      unsigned errcode = err->error_code;
      //char errorMsg [1024];
      switch (errcode) {
      case MMR_ERROR_NONE:
          sprintf(errorMsg, "No error", "%s");
          break;
      case MMR_ERROR_UNKNOWN:
          sprintf(errorMsg, "unKnown error", "%s");
          break;
      case MMR_ERROR_INVALID_PARAMETER:
          sprintf(errorMsg, "invalid parameters", "%s");
          break;
      case MMR_ERROR_INVALID_STATE:
          sprintf(errorMsg,
                  "An attempt to play or seek while there's no input attached or to talk to the context after it's been destroyed",
                  "%s");
          break;
      case MMR_ERROR_UNSUPPORTED_VALUE:
          sprintf(errorMsg,
                  "Input or output type not recognized by any plugin Speed out of range",
                  "%s");
          break;
      case MMR_ERROR_UNSUPPORTED_MEDIA_TYPE:
          sprintf(errorMsg, "No plugin recognized data format", "%s");
          break;
      case MMR_ERROR_MEDIA_PROTECTED:
          sprintf(errorMsg,
                  " The media format was recognized but file is DRM-protected and either uses an unsupported DRM scheme or the reason for failure is not one of the specific DRM errors listed below",
                  "%s");
          break;
      case MMR_ERROR_UNSUPPORTED_OPERATION:
          sprintf(errorMsg,
                  "A seek or set speed call with media that doesn't support it  Attach/detach output with a plugin that doesn't support it",
                  "%s");
          break;
      case MMR_ERROR_READ:
          sprintf(errorMsg, " I/O error at source", "%s");
          break;
      case MMR_ERROR_WRITE:
          sprintf(errorMsg, " I/O error at sink", "%s");
          break;
      case MMR_ERROR_MEDIA_UNAVAILABLE:
          sprintf(errorMsg, "Can't open source", "%s");
          break;
      case MMR_ERROR_MEDIA_CORRUPTED:
          sprintf(errorMsg, "Media currepted", "%s");
          break;
      case MMR_ERROR_OUTPUT_UNAVAILABLE:
          sprintf(errorMsg,
                  "Can't open sink (possibly because no plugin recognizes it)",
                  "%s");
          break;
      case MMR_ERROR_NO_MEMORY:
      case MMR_ERROR_RESOURCE_UNAVAILABLE:
          sprintf(errorMsg, "No Memory or res unAvaiable", "%s");
          break;
      case MMR_ERROR_MEDIA_DRM_NO_RIGHTS:
          sprintf(errorMsg, "No rights to play the file", "%s");
          break;
      case MMR_ERROR_MEDIA_DRM_OUTPUT_PROTECTION:
          sprintf(errorMsg, " DRM output protection mismatch", "%s");
          break;
      case MMR_ERROR_DRM_CORRUPTED_DATA_STORE:
          sprintf(errorMsg, " DRM data store is corrupted", "%s");
          break;
      }
  }
  

  with this, I added my wav and Mp3 files in assets in handle bar, check the playsound

  and make the added files

  # Basic libraries required by most native applications
  LIBS+=bps screen mmrndclient strm
  

  but still getting the error "cannot open source." my error decoding box switch, it will. "

  MMR_ERROR_MEDIA_UNAVAILABLE
  

  What stage is wrong, or I forgot to add something.

  can someone point out a wrapper class to play sounds on the playbook.

  or can I use open AL to play sounds. If OpenAl can b used to please please post a simple or a link to that

  also attached source.

  You're going to get when you see the solution, change:

  rc = snprintf(inputurl, PATH_MAX, "file://%s%s", cwd, Url)
  

  TO

  rc = snprintf(inputurl, PATH_MAX, "file://%s/%s", cwd, Url)
  

  or change

  if( mplayer->loadSound("app/native/farewell.mp3"))
  

  TO

  if( mplayer->loadSound("/app/native/farewell.mp3"))
  

  I just had the same problem.

• Error: the file is not a valid Java code file

  Hello

  IM new in the development of BB, so bad to describe my problem step by step:

  -First of all, had installed jdk-1_5_0_14-win, BlackBerry_JDE_4.6.0, j2sdk-1_4_2_18-win, Desktop manager 4.6

  -Open BB JDE, create a new workspace

  -Add a project HelloWorldDemo.jdp file (located in the sample folder)

  -Debug the application in the Simulator (9000-JDE) without any error

  -Construction of the project and generate the .axl and .cod files

  -Try to install this app (HelloWorldDemo.cod) in my device with error

  C:\Archivos programa\Research in Motion\BlackBerry JDE 4.6.0\samples\com\rim\samples\device\helloworlddemo>javaloader u load HelloWorldDemo.cod
  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2007 Research In Motion Limited
  Connected
  HelloWorldDemo load error: the file is not a valid Java code file
  7832 bytes sent to ~ 15664 bps
  Disconnected

  -Also try to install the application with Desktop Manager and the .axl file, but show this message "a fatal error has occurred while updating your software to devices." Please try again ".

  My device is a Blackberry 8700

  Software: v4.1.0.351

  Help, please!

  Thank you!

  Thank you!! Problem solved.

• Entry interface errors

  We see entry errors on the Gi0/1 interface on cisco 1941/K9

  Also, after reset the counters, we see these errors is cumulative once in 2-3 hours

  Any suggestions where to start?

  See logging no signal is today all the...

  #sh int gi0/1
  GigabitEthernet0/1 is up, line protocol is up
  Material is CN Gigabit Ethernet, the address is bc16.2222.1111 (bia bc16.2222.1111)
  Description: For the LAN-Lehavim
  The Internet address is 172.16.55.2/29
  MTU 1500 bytes, BW 1000000 Kbit/s, 10 DLY usec,
  reliability 255/255, txload 3/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  KeepAlive set (10 sec)
  Full-Duplex, 1 Gbps, media type is RJ45
  control output stream is not supported, control of input stream is not supported
  Type of the ARP: ARPA, ARP Timeout 04:00
  Last entry of 00:00:00, 00:00:00 exit, exit hang never
  Last clearing of "show interface" counters 07:15:19
  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0
  Strategy of queues: fifo
  Output queue: 0/1024 (size/max)
  30 second entry rate 5911000 bps, 2439 packets/s
  exit rate of 30 seconds 14787000 bps, 2919 packets/s
  72815038 package, 3854388881 bytes, 0 no buffer entry
  Received 16169 broadcasts (5648 multicasts to IP)
  0 Runts, 0 giants, 0 shifters
       entry 46 errors, 0 CRC, 0 frame, invaded 46, 0 ignored
  Watchdog 0, multicast 16164, break 0 comments
  78723290 packets output, 1917039290 bytes, 0 underruns
  0 output errors, 0 collisions, 0 resets interface
  870 drops of unknown protocol
  0 babbles, collision end 0, 0 deferred
  carrier, 0 no carrier, lost 0 0 interrupt output
  output buffer, the output buffers 0 permuted 0 failures

  Yesterday was 1120 errors.

  In show processes cpu sound there is no cleats

  Hi you entered mistakes and cost overruns at the same time

  This means that your more using the interface, too inbound, buffers are filled and drops traffic when its maxed out

  It's Cisco response to exceedances

  In a small number of cases, the overrun counter can be incremented due to a software fault. However, in the majority of cases, it indicates that the capacity of the interface has been exceeded. Nothing can be done on the router that reports of cost overruns. If possible, the rate at which frames are to come should be controlled at the remote end of the connection. Otherwise, if the number of exceedances is high, the equipment must be upgraded.

• How to read Wireless Interface error

  I have a few questions about this error on the interface.

  (1) what could be the problem and the solution for the mistakes of this interface? I noticed that the number of output errors multiply.

  (2) why the number of errors is different from the interface of two?

  (3) how to know either the AP or external antennas is defective? This access point is a 1200 series.

  AP #sh int dot11Radio 0

  Dot11Radio0 is up, line protocol is up

  Material is 802.11 G Radio, the address is 1111.1111.1111 (bia 1212.1212.1212)

  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,

  reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation 802. 1 q Virtual LAN, Vlan ID 1., loopback not set

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry of 00:00:00, 00:00:00 exit, exit hang never

  Last clearing of "show interface" counters 17:19:47

  Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 7338

  Strategy of queues: fifo

  Output queue: 0/30 (size/max)

  5 minute input rate 5000 bps, 6 packets/sec

  5 minute output rate 243000 bits/s, 145 packets/s

  1034266 package, 1153540007 bytes, 6 no input buffer

  Received 6155 broadcasts, 0 Runts, 0 Giants 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  entry packets 0 with condition of dribble detected

  1171797 packets output, 443779394 bytes, 0 underruns

  449 output errors, 0 collisions, 0 resets interface

  0 babbles, collision end 0, 0 deferred

  0 lost carrier, 0 no carrier

  output buffer, the output buffers 0 permuted 0 failures

  AP #sh int dot11Radio 1

  Dot11Radio1 is up, line protocol is up

  The material is 802. 11A Radio, the address is 2222.2222.2222 (bia 2323.2323.2323)

  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,

  reliability 255/255, txload 2/255, rxload 1/255

  Encapsulation 802. 1 q Virtual LAN, Vlan ID 1., loopback not set

  Type of the ARP: ARPA, ARP Timeout 04:00

  Last entry of 00:00:00, 00:00:00 exit, exit hang never

  Last clearing of "show interface" counters 17:20:11

  Input queue: 0, 75, 2, 0 (size/max/drops/dumps); Total output drops: 7775

  Strategy of queues: fifo

  Output queue: 0/30 (size/max)

  5 minute input rate 3000 bps, 5 packets/s

  5 minute output rate 528000 bps, 144 packets/s

  241379 package, 35065157 bytes, 4 no input buffer

  Received 4941 broadcasts, 0 Runts, 0 Giants 0 shifters

  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored

  entry packets 0 with condition of dribble detected

  686438 packets output, 149994557 bytes, 0 underruns

  291 output errors, 0 collisions, 0 resets interface

  0 babbles, collision end 0, 0 deferred

  0 lost carrier, 0 no carrier

  output buffer, the output buffers 0 permuted 0 failures

  Rare exceptions, errors always will... increase the key factor is "how (what sort of) errors," and "how long are they produced."

  It is a common process in troubleshooting to reset the counters (XXX clear interface counters) and analyze them for a period to determine the error rate (how fast the mistakes happen).

  You can also use this time to investigate whether counters increase because of some external actions (a Manager or some other iXdXiXoXtX standing in front of the antenna, for example).

  (2) you can activate one both antennas and measures on the ground with a laptop running Netstumbler (www.netstumbler.com , it's free) and compare the results of one antenna compared to another.

  Good luck

  Scott

• BPS dialogues seem to stop working after the initialization of the OpenGL

  In the following example (the main.c to GLES20Template), if the call to show_alert (taken from the example of the dialog box) is performed before the call to bbutil_init_egl, we see a dialog box.  Otherwise, we do not see a dialog box (or an error message explaining what we did wrong).  That passed?

  OpenGL is not compatible with BPS?

  Anyone know how to get the dialogs BPS works in an application that uses OpenGL?

  /*
   * Copyright (c) 2011-2012 Research In Motion Limited.
   *
   * Licensed under the Apache License, Version 2.0 (the "License");
   * you may not use this file except in compliance with the License.
   * You may obtain a copy of the License at
   *
   * http://www.apache.org/licenses/LICENSE-2.0
   *
   * Unless required by applicable law or agreed to in writing, software
   * distributed under the License is distributed on an "AS IS" BASIS,
   * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
   * See the License for the specific language governing permissions and
   * limitations under the License.
   */
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  #include 
  #include 
  
  #include 
  
  #include "bbutil.h"
  
  #include "pthread.h"
  #include 
  
  dialog_instance_t alert_dialog;
  
  static GLfloat vertices[8];
  static GLfloat colors[16];
  
  static GLuint program;
  
  static GLuint transformLoc;
  static GLuint positionLoc;
  static GLuint colorLoc;
  
  static GLfloat matrix[16] = {1,0,0,0,0,1,0,0,0,0,1,0,0,0,0,1};
  
  static GLuint vertexID;
  static GLuint colorID;
  
  static screen_context_t screen_cxt;
  
  EGLContext derived_ctx;
  
  void handleScreenEvent(bps_event_t *event) {
      screen_event_t screen_event = screen_event_get_event(event);
  
      int screen_val;
      screen_get_event_property_iv(screen_event, SCREEN_PROPERTY_TYPE, &screen_val);
  
      switch (screen_val) {
      case SCREEN_EVENT_MTOUCH_TOUCH:
      case SCREEN_EVENT_MTOUCH_MOVE:
      case SCREEN_EVENT_MTOUCH_RELEASE:
          break;
      }
  }
  
  int initialize() {
      //Initialize vertex and color data
      vertices[0] = -0.25f;
      vertices[1] = -0.25f;
  
      vertices[2] = 0.25f;
      vertices[3] = -0.25f;
  
      vertices[4] = -0.25f;
      vertices[5] = 0.25f;
  
      vertices[6] = 0.25f;
      vertices[7] = 0.25f;
  
      colors[0] = 1.0f;
      colors[1] = 0.0f;
      colors[2] = 1.0f;
      colors[3] = 1.0f;
  
      colors[4] = 1.0f;
      colors[5] = 1.0f;
      colors[6] = 0.0f;
      colors[7] = 1.0f;
  
      colors[8] = 0.0f;
      colors[9] = 1.0f;
      colors[10] = 1.0f;
      colors[11] = 1.0f;
  
      colors[12] = 0.0f;
      colors[13] = 1.0f;
      colors[14] = 1.0f;
      colors[15] = 1.0f;
  
      //Query width and height of the window surface created by utility code
      EGLint surface_width, surface_height;
  
      eglQuerySurface(egl_disp, egl_surf, EGL_WIDTH, &surface_width);
      eglQuerySurface(egl_disp, egl_surf, EGL_HEIGHT, &surface_height);
  
      // Create shaders
      const char* vSource =
              "precision mediump float;"
              "uniform mat4 u_projection;"
              "uniform mat4 u_transform;"
              "attribute vec4 a_position;"
              "attribute vec4 a_color;"
              "varying vec4 v_color;"
              "void main()"
              "{"
              "    gl_Position = u_projection * u_transform * a_position;"
              "    v_color = a_color;"
              "}";
  
      const char* fSource =
              "varying lowp vec4 v_color;"
              "void main()"
              "{"
              "    gl_FragColor = v_color;"
              "}";
  
      GLint status;
  
      // Compile the vertex shader
      GLuint vs = glCreateShader(GL_VERTEX_SHADER);
      if (!vs) {
          fprintf(stderr, "Failed to create vertex shader: %d\n", glGetError());
          return EXIT_FAILURE;
      } else {
          glShaderSource(vs, 1, &vSource, 0);
          glCompileShader(vs);
          glGetShaderiv(vs, GL_COMPILE_STATUS, &status);
          if (GL_FALSE == status) {
              GLchar log[256];
              glGetShaderInfoLog(vs, 256, NULL, log);
  
              fprintf(stderr, "Failed to compile vertex shader: %s\n", log);
  
              glDeleteShader(vs);
          }
      }
  
      // Compile the fragment shader
      GLuint fs = glCreateShader(GL_FRAGMENT_SHADER);
      if (!fs) {
          fprintf(stderr, "Failed to create fragment shader: %d\n", glGetError());
          return EXIT_FAILURE;
      } else {
          glShaderSource(fs, 1, &fSource, 0);
          glCompileShader(fs);
          glGetShaderiv(fs, GL_COMPILE_STATUS, &status);
          if (GL_FALSE == status) {
              GLchar log[256];
              glGetShaderInfoLog(fs, 256, NULL, log);
  
              fprintf(stderr, "Failed to compile fragment shader: %s\n", log);
  
              glDeleteShader(vs);
              glDeleteShader(fs);
  
              return EXIT_FAILURE;
          }
      }
  
      // Create and link the program
      program = glCreateProgram();
      if (program)
      {
          glAttachShader(program, vs);
          glAttachShader(program, fs);
          glLinkProgram(program);
  
          glGetProgramiv(program, GL_LINK_STATUS, &status);
          if (status == GL_FALSE)    {
              GLchar log[256];
              glGetProgramInfoLog(fs, 256, NULL, log);
  
              fprintf(stderr, "Failed to link shader program: %s\n", log);
  
              glDeleteProgram(program);
              program = 0;
  
              return EXIT_FAILURE;
          }
      } else {
          fprintf(stderr, "Failed to create a shader program\n");
  
          glDeleteShader(vs);
          glDeleteShader(fs);
          return EXIT_FAILURE;
      }
  
      glUseProgram(program);
  
      // Set up the orthographic projection - equivalent to glOrtho in GLES1
      GLuint projectionLoc = glGetUniformLocation(program, "u_projection");
      {
          GLfloat left = 0.0f;
          GLfloat right = (float)(surface_width) / (float)(surface_height);
          GLfloat bottom = 0.0f;
          GLfloat top = 1.0f;
          GLfloat zNear = -1.0f;
          GLfloat zFar = 1.0f;
          GLfloat ortho[16] = {2.0 / (right-left), 0, 0, 0,
                              0, 2.0 / (top-bottom), 0, 0,
                              0, 0, -2.0 / (zFar - zNear), 0,
                              -(right+left)/(right-left), -(top+bottom)/(top-bottom), -(zFar+zNear)/(zFar-zNear), 1};
          glUniformMatrix4fv(projectionLoc, 1, false, ortho);
      }
  
      // Store the locations of the shader variables we need later
      transformLoc = glGetUniformLocation(program, "u_transform");
      positionLoc = glGetAttribLocation(program, "a_position");
      colorLoc = glGetAttribLocation(program, "a_color");
  
      // We don't need the shaders anymore - the program is enough
      glDeleteShader(fs);
      glDeleteShader(vs);
  
      // Generate vertex and color buffers and fill with data
      glGenBuffers(1, &vertexID);
      glBindBuffer(GL_ARRAY_BUFFER, vertexID);
      glBufferData(GL_ARRAY_BUFFER, sizeof(vertices), vertices, GL_STATIC_DRAW);
  
      glGenBuffers(1, &colorID);
      glBindBuffer(GL_ARRAY_BUFFER, colorID);
      glBufferData(GL_ARRAY_BUFFER, sizeof(colors), colors, GL_STATIC_DRAW);
  
      // Perform the same translation as the GLES1 version
      matrix[12] = (float)(surface_width) / (float)(surface_height) / 2;
      matrix[13] = 0.5;
      glUniformMatrix4fv(transformLoc, 1, false, matrix);
  
      //////////////////////////////////////////////////////////////
      // Test code to stimulate multi-threading bug:
  
      EGLint contextAttribs[] = { EGL_CONTEXT_CLIENT_VERSION, 2, EGL_NONE, EGL_NONE };
  
      // Create a shared context:
      derived_ctx = eglCreateContext(egl_disp, egl_conf, egl_ctx, contextAttribs);
  
      return EXIT_SUCCESS;
  }
  
  /*void* aThread(void *not_used) {
  
      EGLint numConfigs;
      EGLConfig auxConfig;
      EGLSurface auxSurface;
  
      const EGLint auxConfigAttribs[] =
          {
              EGL_SURFACE_TYPE, EGL_PBUFFER_BIT,
              EGL_BLUE_SIZE, 8,
              EGL_GREEN_SIZE, 8,
              EGL_RED_SIZE, 8,
              EGL_ALPHA_SIZE, 0,
              EGL_DEPTH_SIZE, 0,
              EGL_STENCIL_SIZE, 0,
              EGL_NONE
          };
  
      EGLint pbufferAttribs[] =
          {
              EGL_WIDTH, 1,
              EGL_HEIGHT, 1,
              EGL_TEXTURE_TARGET, EGL_NO_TEXTURE,
              EGL_TEXTURE_FORMAT, EGL_NO_TEXTURE,
              EGL_NONE
          };
  
      eglChooseConfig(egl_disp, auxConfigAttribs, &auxConfig, 1, &numConfigs);
      auxSurface = eglCreatePbufferSurface(egl_disp, auxConfig, pbufferAttribs);
  
      EGLBoolean  result = eglMakeCurrent(egl_disp, auxSurface, auxSurface, derived_ctx);
      if (result == EGL_FALSE){
          fprintf(stderr, "UNABLE TO MAKE CONTEXT CURRENT\n");
          //int err = glGetError();
          bbutil_terminate();
      } else {
          fprintf(stderr, "made shared context current!\n");
      }
      return NULL;
  }*/
  
  void render() {
      // Increment the angle by 0.5 degrees
      static float angle = 0.0f;
      angle += 0.5f * M_PI / 180.0f;
  
      //Typical render pass
      glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
  
      // Enable and bind the vertex information
      glEnableVertexAttribArray(positionLoc);
      glBindBuffer(GL_ARRAY_BUFFER, vertexID);
      glVertexAttribPointer(positionLoc, 2, GL_FLOAT, GL_FALSE, 2 * sizeof(GLfloat), 0);
  
      // Enable and bind the color information
      glEnableVertexAttribArray(colorLoc);
      glBindBuffer(GL_ARRAY_BUFFER, colorID);
      glVertexAttribPointer(colorLoc, 4, GL_FLOAT, GL_FALSE, 4 * sizeof(GLfloat), 0);
  
      // Effectively apply a rotation of angle about the y-axis.
      matrix[0] = cos(angle);
      matrix[2] = -sin(angle);
      matrix[8] = sin(angle);
      matrix[10] = cos(angle);
      glUniformMatrix4fv(transformLoc, 1, false, matrix);
  
      // Same draw call as in GLES1.
      glDrawArrays(GL_TRIANGLE_STRIP, 0 , 4);
  
      // Disable attribute arrays
      glDisableVertexAttribArray(positionLoc);
      glDisableVertexAttribArray(colorLoc);
  
      bbutil_swap();
  }
  /**
   * Show an alert dialog that has two buttons: a "Cancel" button, and a "Submit" button.
   */
  static void
  show_alert()
  {
      if (alert_dialog) {
          return;
      }
  
      if (dialog_create_alert(&alert_dialog) != BPS_SUCCESS) {
          fprintf(stderr, "Failed to create alert dialog.");
          return;
      }
  
      if (dialog_set_alert_message_text(alert_dialog, "Hello World!") != BPS_SUCCESS) {
          fprintf(stderr, "Failed to set alert dialog message text.");
          dialog_destroy(alert_dialog);
          alert_dialog = 0;
          return;
      }
  
      /*
       * Create a context to attach to the cancel button
       */
      char* cancel_button_context = "Cancelled";
  
      /*
       * Use a button label defined in bps/dialog.h. Attach a context to the button.
       */
      if (dialog_add_button(alert_dialog, DIALOG_CANCEL_LABEL, true, cancel_button_context, true) != BPS_SUCCESS) {
          fprintf(stderr, "Failed to add button to alert dialog.");
          dialog_destroy(alert_dialog);
          alert_dialog = 0;
          return;
      }
  
      /*
       * Use a button label of our own. Don't attach a context to the button.
       */
      if (dialog_add_button(alert_dialog, "Submit", true, 0, true) != BPS_SUCCESS) {
          fprintf(stderr, "Failed to add button to alert dialog.");
          dialog_destroy(alert_dialog);
          alert_dialog = 0;
          return;
      }
  
      if (dialog_show(alert_dialog) != BPS_SUCCESS) {
          fprintf(stderr, "Failed to show alert dialog.");
          dialog_destroy(alert_dialog);
          alert_dialog = 0;
          return;
      }
  }
  
  int main(int argc, char *argv[]) {
      int rc;
      int exit_application = 0;
  
      //glGetError();
      //Initialize BPS library
      bps_initialize();
  
      //Create a screen context that will be used to create an EGL surface to to receive libscreen events
      screen_create_context(&screen_cxt, 0);
  
      //Signal BPS library that navigator and screen events will be requested
      if (BPS_SUCCESS != screen_request_events(screen_cxt)) {
          fprintf(stderr, "screen_request_events failed\n");
          bbutil_terminate();
          screen_destroy_context(screen_cxt);
          bps_shutdown();
          return 0;
      }
  
      if (BPS_SUCCESS != navigator_request_events(0)) {
          fprintf(stderr, "navigator_request_events failed\n");
          bbutil_terminate();
          screen_destroy_context(screen_cxt);
          bps_shutdown();
          return 0;
      }
  
      //Signal BPS library that navigator orientation is not to be locked
      if (BPS_SUCCESS != navigator_rotation_lock(false)) {
          fprintf(stderr, "navigator_rotation_lock failed\n");
          bbutil_terminate();
          screen_destroy_context(screen_cxt);
          bps_shutdown();
          return 0;
      }
  
      //Use utility code to initialize EGL for rendering with GL ES 2.0
      if (EXIT_SUCCESS != bbutil_init_egl(screen_cxt)) {
          fprintf(stderr, "bbutil_init_egl failed\n");
          bbutil_terminate();
          screen_destroy_context(screen_cxt);
          return 0;
      }
  
      //Initialize application logic
      if (EXIT_SUCCESS != initialize()) {
          fprintf(stderr, "initialize failed\n");
          bbutil_terminate();
          screen_destroy_context(screen_cxt);
          bps_shutdown();
          return 0;
      }
  
      dialog_request_events(0);
  
      /*
       * start the application with a dialog.
       */
      show_alert();
  
      // start a thread:
      //pthread_t  _t, _t2;
      //pthread_create(&_t, NULL, aThread, NULL);
      //pthread_create(&_t2, NULL, aThread, NULL);
  
      while (!exit_application) {
          //Request and process all available BPS events
          bps_event_t *event = NULL;
  
          for(;;) {
              rc = bps_get_event(&event, 0);
              assert(rc == BPS_SUCCESS);
  
              if (event) {
                  int domain = bps_event_get_domain(event);
  
                  if (domain == screen_get_domain()) {
                      handleScreenEvent(event);
                  } else if ((domain == navigator_get_domain())
                          && (NAVIGATOR_EXIT == bps_event_get_code(event))) {
                      exit_application = 1;
                  }
              } else {
                  break;
              }
          }
          render();
      }
  
      //Stop requesting events from libscreen
      screen_stop_events(screen_cxt);
  
      //Shut down BPS library for this process
      bps_shutdown();
  
      //Use utility code to terminate EGL setup
      bbutil_terminate();
  
      //Destroy libscreen context
      screen_destroy_context(screen_cxt);
      return 0;
  }
  

  Try this: Edit bbutil.c to create a group of windows with screen_create_window_group() immediately after creating the window with screen_create_window().

• Radio error 1140 series access point

  We have recently been deployed 1142N access points along the
  our campus and have experienced some problems with stability of connectivity.
  It seems that at random times Radio 0 will descend and connectivity to anyone to kill
  Active access point. By issuing a command to 'see the dot11 association', not
  get a result at as such research:

  150 5-516-AP > sh dot11 association

  802.11 client Stations on Dot11Radio1:

  SSID [Berklee student]:
  Unknown - auto Drv_Add_In 0.0.0.0 0026.xxxx.xxxx
  Unknown - auto Drv_Add_In 0.0.0.0 9027.xxxx.xxxx
  Unknown - auto Drv_Add_In 0.0.0.0 9027.xxxx.xxxx
  Unknown - auto Drv_Add_In 0.0.0.0 9027.xxxx.xxxx

  While in this State, making orders for d0/d1 int show gives you the following results:

  Dot11Radio0 is reset, line protocol is down
  The material is 802.11n 2.4 GHz Radio, the address is 1c17.d3ca.82f0 (bia 1c17.d3ca.82f0)
  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation 802. 1 q Virtual LAN, Vlan ID 1., loopback not set
  Type of the ARP: ARPA, ARP Timeout 04:00
  Last entry 1d16h, 00:00:00 exit, exit hang never
  Final cleaning of "show interface" counters never
  Input queue: 0/1677/81485/0 (size/max/drops/dumps); Total output drops: 72073802
  Strategy of queues: fifo
  Output queue: 0/30 (size/max)
  5 minute input rate 0 bps, 0 packets/s
  5 minute output rate 0 bps, 0 packets/s
  119910815 package, 4144709374 bytes, 0 no buffer entry
  Received 1084186 broadcasts, 0 Runts, 0 Giants 0 shifters
  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
  entry packets 0 with condition of dribble detected
  165186574 packets output, 503099299 bytes, 0 underruns
  19743 output errors, 0 collisions, 116 interface resets
  unknown protocol 0 drops
  0 babbles, collision end 0, 0 deferred
  0 lost carrier, 0 no carrier
  output buffer, the output buffers 0 permuted 0 failures

  Dot11Radio1 is up, line protocol is up
  The material is 802.11n 5 GHz Radio, the address is 1c17.d37b.9a20 (bia 1c17.d37b.9a20)
  MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation 802. 1 q Virtual LAN, Vlan ID 1., loopback not set
  Type of the ARP: ARPA, ARP Timeout 04:00
  Last entry 1d04h, 00:00:00 exit, exit hang never
  Final cleaning of "show interface" counters never
  Input queue: 0/1677/10511/0 (size/max/drops/dumps); Total output drops: 75923217
  Strategy of queues: fifo
  Output queue: 0/30 (size/max)
  5 minute input rate 4000 bps, 6 packets/sec
  5 minute output rate 0 bps, 0 packets/s
  200792332 package, 999483950 bytes, 0 no buffer entry
  Received 722359 broadcasts, 0 Runts, 0 Giants 0 shifters
  entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
  entry packets 0 with condition of dribble detected
  293761017 packets output, 4202490277 bytes, 0 underruns
  6043 output errors, 0 collisions, 3 interface resets
  unknown protocol 0 drops
  0 babbles, collision end 0, 0 deferred
  0 lost carrier, 0 no carrier
  output buffer, the output buffers 0 permuted 0 failures

  The only way out of this state the AP should perform a reload/restart.

  Once again this problem seems to be random but I had to connect to all daily from the AP
  basis to ensure that they are all in place and working properly which is a pain! We have about 40
  running and about 60 percent of 1142 have experienced this problem at one time or another. So far, I
  have not found any pattern or record information that can direct me to root causes
  Thus, any idea that you can provide would be a great help!

  Hello

  Please open a case with us (TAC), help you... There are a few bugs that is...

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtf10941

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCte16139

  Concerning

  Surendra

  ======

  Please rate the posts that answered your question or was useful

• Link error Nexus 5548

  Hi all

  I have problems with the ports of 1000Go Nexus 5548 ports. They go down once a while with the error "connection not connected" while the links are connected. When I move the connections to other ports, they work, but after a while the thumbs down with the same error. I can confirm it is currently down worked and its currently connected. Has anyone seen the error before?

  Please see the output of the interface that evolves down below:

  Sho VNX_NEXUS # interface eth1/11
  Ethernet1/11 is down (not connected link)
  Material: 1000/10000 Ethernet, address: 002a.6a71.1f92 (bia 002a.6a71.1f92)
  Description: Link_to_EMC_RPA3
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec
  reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA
  Port mode is access
  Auto-recto-sided, 1000 Mbps, media type is 10G
  Lighthouse is off
  Input stream control is turned off, output flow control is disabled
  Flow mode is dedicated
  Switchport monitor is off
  EtherType is 0 x 8100
  Last link flapped 2d23h
  Last clearing of "show interface" counters 5w6d
  entry 30 seconds 0 bps, 0 packets/s rate
  exit rate of 30 seconds 0 bps, 0 packets/s
  Load-time #2: 5 minutes (300 seconds)
  heat flow 0 bit/s, 0 pps; output rate 0 bps, 0 pps
  RX
  43384443 30 packs 1496 multicasts packets broadcast unicast packets
  packages of entry 43385969 7837558138 bytes
  0 bytes removing storm Jumbo packets 0
  Giants of Runts 0 0 0 CRC 0 no buffer
  short entry error 0 0 0 overflow under-run 0 0 ignored
  0 0 bad etype watchdog fall 0 bad proto place 0 if drop
  0 entry with dribble 0 rejection of entry
  Rx pause 0
  TX
  56587244 packet 3937125 packets 1487058 multicasts packets unicast broadcast
  62011427 packets output, 14141808286 bytes
  0 jumbo packets
  collision of errors 0 0 released 0 postponed end collision 0
  0 lost carrier 0 no 0 0 output babble carrier throw
  Tx break 0
  18 interface resets

   Last link flapped 2d23h 18 interface resets

  You have a failure of the line.

• P2V conversion failed to 95% a general error has occurred: Reconfiguration failed

  Try to convert the laptop HP dv2000 WinXP home.

  Here are some of the errors in the logs. Any help would be appreciated. My search resulted in little things.

  Was a warning in the journal highlights: failed to refresh the drive letters for the layout of the target volume.

  ===========

  error impossible to extract the media type for
  ? \VOLUME{380506fc-2ddd-11db-b221-806d6172696f}\: incorrect function (1)

  User agent is "VMware-client/4.0.0".

  ===========

  Number of partition: Invalid magic sector.

  Disk number 1 were ignored due to errors when reading partition table

  Number of partition: Invalid magic sector.

  Disk number 1 were ignored due to errors during playback of dynamic disks header or LDM database is corrupt

  Number of partition: Invalid magic sector.

  Number of partition: Invalid magic sector.

  Number of partition: Invalid magic sector.

  Number of partition: Invalid magic sector.

  ===========

  Directory creation error using CreateDirectoryEx: cannot create a file when that file exists already (183)

  ===========

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  . \vstor2-mntapi10-374D384D007E00000000000001000000
  WINDOWS\system32\config\SYSTEM under the name of the mntApi286208973830050397 key.

  Unable to load the registry hive
  . \vstor2-mntapi10-374D384D007E00000000000001000000
  WINDOWS\system32\config\SYSTEM, error 0 x 3.

  Could not open the registry hive, MNTAPI_ERROR = 50

  Cannot open the system registry hive. Preserving jump drive letter mapping

  ===========

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  Boot\BCD under the name of the mntApi300615223830050397 key.

  Unable to load the registry hive
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  Boot\BCD error 0 x 3.

  Boot.ini file read error
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  Boot.ini

  ===========

  program boot

  timeout = 30

  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Edition family "/ noexecute = optin/fastdetect

  ReconfigurationTransaction: volume of comments system caching

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  .\vstor2-mntapi10-374D384D007E00000000000003000000\WINDOWS\system32\config\SOFTWARE under the name of the mntApi301193348830050397 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-374D384D007E00000000000003000000\WINDOWS\system32\config\SOFTWARE, error 0 x 3.

  50 error when you open the software hive

  Cannot read the news of the OS on the system disk: 50

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-374D384D007E00000000000003000000\

  LocalUndoFolder:
  .\vstor2-mntapi10-374D384D007E00000000000003000000\$reconfig$

  Error 3 (hive to load error: the system cannot find the specified path (3)) temporary hive loading
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  system32\config\SYSTEM under the name of the mntApi301224598830050397 key.

  Unable to load the registry hive
  . \vstor2-mntapi10-374D384D007E00000000000003000000
  system32\config\SYSTEM, error 0 x 3.

  Cannot access registry SYSTEM comments, error 50

  Journal of the undo entry...

  The C:\WINDOWS\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory cleaning...

  TaskImpl failed with MethodFault::Exception: vmodl.fault.SystemError

  RecordOp add: event [9], task-1

  ConvertTask updates, States: 4, percentage: 95, xfer rate (bps): 1615946

  GetEvent (taskID = task-1) task converter

  RecordOp REMAP: info, task-1

  Task failed:

  SetError (taskID = task-1) task converter

  Completing the task-1 task with State = 3

  ===========

  Error 1 setting SFN

  ===========

  Try the Converter 3.0.3 - which seems to be a bit more reliable

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• database does not start because of the error 445

  Hello
  
  We have three databases on HP - UX 11.31 server, DB version is 10.2.0.4, at the slow pace, we started in all databases, when I tried to connect to the server, it was very slow, even the sqlplus took a long time, when checked all databases alert logs, and found the error in each log file alert. below
  

  ksvcreate: Process(m000) creation failed
  Sun Apr 10 12:56:56 2011
  ksvcreate: Process(m000) creation failed
  Sun Apr 10 12:59:00 2011

  The use of server resources has been very well with almost 15% 55% memory usage, CPU usage.
  
  I gave up the databases, then tried to start, failed to start with error for all databases. below
  
  ORA-00445: "PMON" background process is not started after 120 seconds
  
  Here is the content of the journal of the alerts for a database;
  

  ksvcreate: Process(m000) creation failed
  Sun Apr 10 13:09:17 2011
  ksvcreate: Process(m000) creation failed
  Sun Apr 10 13:24:29 2011
  Starting ORACLE instance (normal)
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  WARNING: Could not create SMR
  Picked latch-free SCN scheme 3
  Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
  Autotune of undo retention is turned on.
  IMODE=BR
  ILAT =242
  LICENSE_MAX_USERS = 0
  SYS auditing is disabled
  Sun Apr 10 13:27:10 2011
  ksdpec: called for event 13740 prior to event group initialization
  Starting up ORACLE RDBMS Version: 10.2.0.4.0.
  System parameters with non-default values:
    processes                = 2000
    sga_max_size             = 3221225472
    __shared_pool_size       = 1828716544
    __large_pool_size        = 16777216
    __java_pool_size         = 16777216
    __streams_pool_size      = 16777216
    nls_date_format          = dd-mm-yyyy
    nls_calendar             = Arabic Hijrah
    filesystemio_options     = NONE
    disk_asynch_io           = FALSE
    sga_target               = 3221225472
    control_files            = /oradb/oradata/centl/control01.ctl, /oradb/oradat
  a/cent/control02.ctl, /oradb/oradata/cent/control03.ctl
    db_block_size            = 8192
    __db_cache_size          = 1325400064
    db_writer_processes      = 4
    compatible               = 10.2.0.3.0
    db_file_multiblock_read_count= 16
    db_recovery_file_dest    = /arch
    db_recovery_file_dest_size= 32212254720
    undo_management          = AUTO
    undo_tablespace          = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain                =
    dispatchers              = (PROTOCOL=TCP) (SERVICE=centlXDB)
    smtp_out_server          = 10.241.16.118:25
    job_queue_processes      = 10
    background_dump_dest     = /u01/app/oracle/admin/cent/bdump
    user_dump_dest           = /u01/app/oracle/admin/centl/udump
    max_dump_file_size       = 1024
    core_dump_dest           = /u01/app/oracle/admin/cent/cdump
    audit_file_dest          = /u01/app/oracle/admin/cent/adump
    db_name                  = cent
    open_cursors             = 2000
    pga_aggregate_target     = 1699741696
  Sun Apr 10 13:31:50 2011
  USER: terminating instance due to error 445
  Instance terminated by USER, pid = 2089

  Contents of the Trace file for one of the databases;
  

  ORACLE_HOME = /u01/app/oracle/db
  System name:    HP-UX
  Node name:      db01
  Release:        B.11.31
  Version:        U
  Machine:        ia64
  Instance name: cent
  Redo thread mounted by this instance: 0 <none>
  Oracle process number: 0
  Unix process pid: 4667, image: oracle@db01
  
  *** 2011-04-10 15:44:19.475
  Dynamic strand is set to TRUE
  Running with 2 shared and 242 private strand(s). Zero-copy redo is FALSE
  *** 2011-04-10 15:50:40.280
  Waited for process PMON to initialize for 60 seconds
  *** 2011-04-10 15:50:40.280
  Dumping diagnostic information for PMON:
  OS pid = 4701
  loadavg : 1.36 1.35 1.29
  Swapinfo :
          Avail = 15520.08Mb Used = 2490.52Mb
          Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
          Free Mem  = 10161.05Mb
    F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    S
  TIME TTY       TIME COMD
  1401 S   oracle  4701     1  0 154 20 e000000413447080 53772 e00000017cefa140 15
  :49:39 ?         0:00 ora_pmon_cent
  /bin/sh[2]: /opt/langtools/bin/gdb:  not found.
  *** 2011-04-10 15:50:40.372
  *** 2011-04-10 15:50:50.470
  Waited for process PMON to initialize for 111 seconds
  *** 2011-04-10 15:51:31.180
  Dumping diagnostic information for PMON:
  OS pid = 4701
  loadavg : 1.36 1.35 1.30
  Swapinfo :
          Avail = 15520.08Mb Used = 2490.52Mb
          Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
          Free Mem  = 10160.98Mb
    F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    S
  TIME TTY       TIME COMD
  1401 S   oracle  4701     1  0 154 20 e000000413447080 53772 e00000017cefa140 15
  :49:39 ?         0:00 ora_pmon_cent
  /bin/sh[2]: /opt/langtools/bin/gdb:  not found.
  *** 2011-04-10 15:51:31.250
  Killing process (ospid 4701):  (reason=x4 error=0)
  ... and the process is still alive after kill!
  *** 2011-04-10 15:51:40.190
  KSTDUMP: In-memory trace dump
  TIME(usecs):SEQ# ORAPID   SID EVENT  OP DATA
  ========================================================================
  kground PMON
  2C463A42:000000F8  1999     0 10254  42 KSBS1P: timed out while waiting
  2C463A48:000000F9  1999     0 10254  51 KSBS1P: out of loop: process did not sta
  rt
  KSTDUMP: End of in-memory trace dump
  *** 2011-04-10 15:51:40.190

  All databases have similar trace files, I rebooted the server and still none of the database begins.
  The use of server resources seems to be very good;
  

  oracle$ iostat 3 3
    device    bps    sps   msps
  
     disk3     93    6.9    1.0
     disk5     17    2.4    1.0
    disk17      0    0.1    1.0
  
     disk3     21    4.3    1.0
     disk5     20    4.0    1.0
    disk17      0    0.3    1.0
  
     disk3      0    0.0    1.0
     disk5      0    0.0    1.0
    disk17      0    0.0    1.0
  
  oracle$ swapinfo -tan
               Kb      Kb      Kb   PCT  START/      Kb
  TYPE      AVAIL    USED    FREE  USED   LIMIT RESERVE  PRI  NAME
  dev     24576000       0 24576000    0%       0       -    1  /dev/vg00/lvol2
  reserve       -  918204 -918204
  memory  15892564 2550292 13342272   16%
  total   40468564 3468496 37000068    9%       -       0    -
  
  System: hrdbdr01                                      Sun Apr 10 16:25:28 2011
  Load averages: 1.61, 1.60, 1.55
  237 processes: 182 sleeping, 55 running
  Cpu states:
  CPU   LOAD   USER   NICE    SYS   IDLE  BLOCK  SWAIT   INTR   SSYS
   0    1.61  27.7%   0.0%  71.3%   1.0%   0.0%   0.0%   0.0%   0.0%
   1    1.59  32.0%   0.0%  67.0%   1.0%   0.0%   0.0%   0.0%   0.0%
   2    1.61  13.0%  14.0%  71.0%   2.0%   0.0%   0.0%   0.0%   0.0%
   3    1.60  10.0%  20.0%  69.0%   1.0%   0.0%   0.0%   0.0%   0.0%
  ---   ----  -----  -----  -----  -----  -----  -----  -----  -----
  avg   1.61  20.8%   8.9%  69.3%   1.0%   0.0%   0.0%   0.0%   0.0%
  
  System Page Size: 4Kbytes
  Memory: 974032K (512772K) real, 1317016K (704304K) virtual, 12491712K free  Page
  # 1/24
  
  CPU TTY  PID USERNAME PRI NI   SIZE    RES STATE    TIME %WCPU  %CPU COMMAND
   3   ?  4249 root     255 39 20140K  1612K run     42:41 49.96 49.88 stm
   2   ?  3360 root     255 39 20140K  1612K run     55:11 49.65 49.56 stm
   0   ?  3040 root     240 20 20140K  1612K run     72:27 49.08 48.99 stm
   1   ?  2419 root     241 20 20140K  1616K run     77:20 48.81 48.73 stm
   1   ?  4850 root     168 20 20140K  1612K sleep    4:15 23.99 23.95 stm
   2   ?  4583 root     168 20 20140K  1612K sleep   12:21 22.93 22.89 stm

  Hello

  No change around the IP address of the server has occurred?

  If Yes, the following Note of My Oracle Support can help you:

  Ora-00445: Background Process "Pmon" Did Not Start After 120 Seconds [ID 1301185.1]
  

  NB: It applies on Oracle * 10.2.0.3 and later *.

  Hope this helps.
  Best regards
  Jean Valentine