error in creating simple FNPP base map

Similar Questions

• error in creating simple procedure

  I don't understand why Ms below complains of this:
  
  PROCEDURAL LOADTABLE errors:
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  3/1 PLS-00103: encountered the symbol "DECLARE" when waiting for an a
  What follows:
  Start function < an ID > pragma procedure subtype type
  < between double quote delimited identifiers > delete the current cursor
  There are the external language prior
  The symbol 'start' is substituted for 'DECLARE' continue.
  
  17/4 PLS-00103: encountered the symbol "end-of-file" when waiting for him
  one of the following values:
  (begin case declare exit end exception for goto if loop mod)
  pragma raise return null select update while with
  
  LINE/COL ERROR
  -------- -----------------------------------------------------------------
  < an ID > < a between double quote delimited identifiers of >
  < a variable binding > < < continue close check out lock remove current
  Insert restore open savepoint sql execute commit forall
  purge pipes of fusion
  
  
  
  CREATE OR REPLACE PROCEDURE loadtable AS
  
  DECLARE
  I have pls_integer;
  sql_stmt VARCHAR2 (4000);
  all_names VARCHAR2 (4000);
  all_names2 VARCHAR2 (4000);
  TYPE typ_coltab IS TABLE OF dba_tab_columns % ROWTYPE INDEX BY pls_integer;
  coltab_table typ_coltab;
  coltab_table2 typ_coltab;
  coltab_rec dba_tab_columns % ROWTYPE;
  CURSOR cur is SELECT *.
  FROM dba_tab_columns where owner = "MYSCHEMA" and table_name = 'CONFIG ';
  
  BEGIN
  NULL;
  END;
  /
  
  
  Thank you
  Floyd

  Hello, you don't need the DECLARE it:

  CREATE OR REPLACE PROCEDURE loadtable AS
  
  i pls_integer ;
  sql_stmt VARCHAR2(4000);
  all_names VARCHAR2(4000);
  all_names2 VARCHAR2(4000);
  TYPE typ_coltab IS TABLE OF dba_tab_columns%ROWTYPE INDEX BY pls_integer;
  coltab_table typ_coltab ;
  coltab_table2 typ_coltab ;
  coltab_rec dba_tab_columns%ROWTYPE ;
  CURSOR cur is SELECT *
  FROM dba_tab_columns where owner='MYSCHEMA' and table_name='CONFIG' ;
  
  BEGIN
  NULL;
  END;
  /
  
  Procedure created.
  

  Edit : DECLARE is not necessary in the procedures (functions or packages), but perhaps need for PL/SQL anonymous blocks - oracle wait statements in procedures, but needs to be explicitly said about them within anonymous blocks.

• Thread: 11gPS2: error in creating the model of wsdl when creating a WebService

  Hello
  I am trying to create a Web Service Proxy using Jdev.I am using a WSDL file in my local system for the same. I choose all the default options, but the proxy is not created due to the following error:
  "Error creating the model of wsdl < wsdl_name >: a class/interface with the xyz name already in use.
  https://picasaweb.Google.com/Sudipto.desmukh/ADFIssues?AuthKey=Gv1sRgCJeF2bWcoM_ZBg#5610073699826050514
  
  I found a few threads that had similar problems, but the solutions did not work for me-
  1)creation of wsdl error model (create model projects for proxies, since in the existing model of project files I had already generated using the created a WebServiceData control assistant)
  2)Error creating Web Service Proxy (there are none of the variables in double or patterns in my wsdl)
  
  Please can anyone suggest what could be bad?
  
  Thank you

  Nassima,

  When you create a proxy, give the name of the package in the "Specify Default Mapping Options" window and continue.
  You will be able to create the proxy now.

  Thank you
  Kamal T

• Error 0x800704b3 when you try to map a network drive

  Hello

  I have the following error message when you try to map a network drive in my home network:
  "\\iomegahmd cannot be reached" and the error code is 0x800704b3.

  I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
  "The system could not find the specified path".

  I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
  Auxiliary function for Winsock driver
  NetBT
  TCP/IP protocol driver
  NetIO-legacy-TDI Support driver
  in the Device Manager is running, but they are all running. Startup is set to 'system '.

  Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

  What else could try, so that I can map network drives?

  I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

  Thanks in advance,
  Tithe

  > I should also mention that the problem persists for a few weeks. Before, it was working properly.

  It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

  I recommend also to disable all security software and check if you experience the same problem.
  If you still experience the problem, then follow the link to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• DVD player don't play - error message «create Overlay» impossible

  Can someone please help. On my satellite player does not playback of the DVD using is InterVideo WinDVD. Error message 'create Overlay failed... ". Please lower your screen resolution or the depth of the screen. "Any help appreciated. Thank you Owen

  Hello

  Try it please follow the instructions in this document. I hope this will help you.

  Good bye

• When the computer restarts, I get the error cannot create shell notification icon please help

  When I reboot count it I get error cannot create shell notification icon can any body help me

  Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

  Apart from that, I suggest you do an online virus and malware scan on the system.

  http://OneCare.live.com/site/en-us/default.htm

  If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why do I get the DDSSecondary error message create

  you try to view the web viewer remote DDSSecondary error message create keeps popping up

  Hello
  I suggest contact you the help support Web site regarding this issue.

• In creation of Windows 7 DVD, download "unspecified error cannot create DVD.

  in creation of w7 dvd, I get after 0.8% "unspecified error cannot create dvd" How can I find this kind of error is, so I can fix it, because on this forum, there is no real answer to this problem. I have a new 64 bit w7 pro, no other software installed computer and works fine engraving only dvd burner the files.

  Hi alexveres,

  1. what type of file you want to burn?

  2. is it works much earlier? If so, then remember to make changes to the computer?

  Take a look at the following links for possible solutions and check if that helps:

  Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".

  Problem with "unknown error" when burning DVD

  I hope this helps.

• error when creating a new partition "the operation you selected will convert the selected disk from basic to dynamic disk...". »

  Original title: getting the error while creating a new partition

  here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.

  I would like to join the screenshot of the error, how?

  Hello

  1 have had any changes made on the computer before the show?

  2. how many partitions are there currently on the computer?

  3. how many hard disks on the computer do you use?

  4. when exactly you get the error message?

  I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:

  Create a new Partition on a hard disk in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx

  I also suggest you the link and attach a screenshot of the screen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-post-a-screen-shot-on-this-forum/c86de820-C620-401c-A804-9f6337cd3053

• Getting error while creating partitation on hard drive

  Getting error while creating partitation on hard drive

  Attached screenshot for warning msg

  You can have up to four primary partitions. Since you already have four of these partitions, you cannot create a fifth partition. You must do this:

  1. Delete a primary partition.
  2. Create an extended partition.
  3. Create logical partitions as you wish within the extended partition.

• New to OAF - oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for HeaderTableEO line

  Hi I'm new to OFA. I am trying to create a master-details form based on the example given on Youtube (but using my own paintings).

  I have already defined in table colums.

  AM code is as follows:

  Public Sub CreateEmailHdrRow()

  {

  xxVmmcSendEmailDefHdrVOImpl vo = getxxVmmcSendEmailDefHdrVO1();

  String s = "Test";

  Line = vo.createRow ();

  If (!) VO.isPreparedForExecution ())

  {

  vo.setMaxFetchSize (0);

  }

  row.setAttribute ("EmailDefName", s);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  When I run, the error occurs at the level of line (rank rank = vo.createRow ();)

  Error message: oracle.jbo.RowCreateException: Houston-25017: error when creating a new entity for xxVmmcSendEmailDefHdrEO line.

  Any help is appreciated.

  Anjan,

  Please check that the type of the CreatedBy attribute is a number representing the id in FND_USER and not the actual text of the name of the user. Standard Oracle columns that use a number for this value not varchar.

  Kristofer Cruz

• I would like my year 10 students design and create simple mobile Web sites

  I would like my year 10 students design and create simple mobile suitable sites that can be used on mobile devices. The idea is that they design the site for their chosen idea and then be able to test this on their own mobile phones or their friends. Ultimately I would like that they can create a site for important events for example, camps sports carnivals etc which could be hosted on our school site. I use BusinessCatalyst for that. I tested a few sites of model by export html and then try to send the file to my phone, but the site is not resize in the phone and most of the media does not work for example sounds. What would be the best way to do this?

  Thank you

  They can use any third-party widget or plugins or use the features of BC for the creation of events, etc.

  Thank you

  Sanjit

• ERROR IN CREATE SPFILE FROM PFILE

  Hello to all... I use oracle 10g and OS is linux... I am creating my existing pfile spfile in the specified location... but I'm getting error... Here is the scenario... pls help me... Thank you

  Create spfile='u01/app/oracle/product/10.2.0/db_1/dbs/spfileorcl.ora 'to pfile='u01/app/oracle/product/10.2.0/db_1/dbs/initorcl.ora ';

  Create a spfile='u01/app/oracle/product/10.2.0/db_1/dbs/spfileorcl.ora' to pfile='u01/app/oracle/product/10.2.0/db_1/dbs/initorcl.ora'

  *

  ERROR on line 1:

  ORA-01078: failure of treatment system parameters

  ORA-27040: create file error, cannot create the file

  Linux error: 2: no such file or directory

  I suspect that you are missing the first slash as below

  Create spfile='/u01/app/oracle/product/10.2.0/db_1/dbs/spfileorcl.ora 'to pfile='/u01/app/oracle/product/10.2.0/db_1/dbs/initorcl.ora ';

• There was an error in creating the temporary file

  (Signature) certificate not saved to the file, as says the answer "there was an error in creating the temporary file.  Opening of the applied wa file says which no valid signing certificate.

  When the file has been saved to a local drive, the certificate has been accepted...

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit