Error in disk drive to upgrade to Windows 7 by Arvato

Similar Questions

• HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

  I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

  I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

  I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

  I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

  My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

  I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

  I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

  I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

  With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.

• Driver video error Code 10 after the upgrade to Windows 7

  Upgrading to Windows 7 & have the following error messages:

  Standard VGA graphic card work not only can not start (Code 10)

  Converter USB - LAN has no driver

  SMA 851 X USB to Fast Ethernet Adapter

  During the initial installation of Windows 7 the monitor works but when Windows upadates are applied it gives the messages described above. Everything worked then on Vista... but also Vista would work!

  Dell does not have a driver for a monitor solution - 2 years. I was running as an extended desktop on a Dell Inspiron 6400 with 2 GB of RAM, new 500GIG Hitachi hard drives.

  Also cannot load the Office Small Business 2007 Business Contact Manager.

  Hi remaxguy,

  See the following article on setting error Code 10:

  http://support.Microsoft.com/kb/943104#appliesTo

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Desktop a6530f Pavilion, new hard drive and upgrade to Windows 7

  I have a desktop Pavilion a6530f with Vista.  My hard drive has been the production of errors, so I bought a new hard drive.  The original hard drive works pretty well as I should be able to create a recovery with a usb flash drive media.  I want to install the new hard drive (Seagate 1 TB SATA 3), and then install Windows 7 upgrade on the new drive.  Will be the ASUS M2N68 - LA / Narra3-GLBE motherboard supports SATA 3 (SATA 2 pilot courses)?  If Yes, where can I get the drivers?  Is there a Web page on the HP site for upgrade to Windows 7 on a new hard drive?  Or I just follow the guests after boot of the Windows 7 upgrade disc and enter the code of Vista product from the label on the side of the PC?

  Here are the specifications of your desktop HP Pavilion a6530f. Based on the specifications, this model shipped from the factory with Windows Vista Home Premium SP1 64-bit installed. This model supports the use of disks SATA 3, however transfer speeds will be limited to the rates for the motherboard SATA 2. No special drivers are required. Seagate 1 TB SATA 3 drive should work fine on this computer, but you may have problems using your HP recovery discs if the new drive is a Format "Advance" AF drive.

  It is unlikely that you will be able to create a recovery media on a USB FlashDrive with this computer. In my view, that this model only supports the creation of recovery DVDs.

  You have a choice of a couple of paths when it comes to the installation of Windows on your computer with a new hard drive installed.

  (1) use your HP Vista recovery disks to install Vista... This may or may not work depending on the new hard drive installed. Then, upgrade to Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Note: the key of Vista with Windows 7 will not work)

  (2) If you don't mind losing the "value-added" software HP originally installed on the computer, you can install Windows 7 without using Vista installed first. Install Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Do not enter the key during the installation of the window) (Note: the key of Vista with Windows 7 will not work)

  In both cases just follow the prompts as needed. I suggest to use Windows 7 SP1, because it seems to be more compatible with the new material, including readers of the AF.

  Please see HP - upgrade to Windows 7 customer care using basic upgrade or install Windows 7. Please see HP Forum - how to install Windows 7 without the disc for useful information and download for Windows 7.

  Please send Bravo

• No CD/DVD drive after upgrade of Windows 8 on Satellite Pro S300L

  The cd Rom drive no longer works after upgrade to Windows 8.
  The drive is not displayed in the Solution Explorer, either. It is mentioned: error in the register.

  I can not change the right driver in Device Manager - probably it was deleted.
  Is the driver of the * MATHSITA DVD-RAM UJ880AS drive * for Windows 8 available?

  How can I make my cd Rom drive working again?
  How can I fix the error?

  Could guide you me in registry change (upper and lower filters) if necessary?

  Post edited by: GRIX

  Hello

  Check please follow thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=68988

  Here, you can find the solution to your problem.

• Get several errors everytime I try to upgrade to windows 10 home

  Original title: Windows 7 Home Premium

  Hello

  I was wondering if anyone could help with my updates of windows 7 Home Premium, I was making several mistakes whenever I try to update for windows Home 10 try the software distribution method I tried convenience stores to update windows - including Microsoft Fixit can you help I even tried to use command prompt to auto download the update but still nothing It's a Windows 7 Home Premium DELL paid the Windows installation disc, but I use it on my ACER for the moment so need to I do? I'm ready to give up, my windows update is not even that check updates more and update Windows 10 keeps telling me to try again. Would that be a virus or malware or a rootkit can please someone help to solve my problem if not free then name your price but please someone help?

  Is there a COA sticker at the bottom of the laptop edition with product key indicated on it?

  It looks like the following:

  

  If you see it, try to update the product key values if the edition installed corresponds to the product key on the COA sticker.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  If you are able to get activated, you should be able to upgrade to Windows 10:

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• creation of recovery disks after the upgrade to windows 8

  I already install windows 8 pro RTM I get MSDN, but I forgot to do the recovery disc.

  I want to know is possible if I now Windows 7 recovery disk? Which means that when I upgraded to windows 8.

  I already check using the Recovery Manager, and he needs 5 DVD-R for recovery, - is this normal?

  Hello

  Yes, normally you need 5 DVD. I believe that you always C:\Wndows.old and you can use it to go back to Windows 7 to Windows 8.

  Kind regards.

• Intel technology quick start error in event visors after upgrade to Windows 10

  Hello

  I get questions with technology Intel Rapid Start after upgrade my Portege Z30t-A-103 to 10 Windows.

  The Windows Event Viewer shows:

  irstrtsv
  Error: Cannot read LBA sector directly

  I tried to disable the technology Intel Rapid boot from the BIOS, but it seems that the problem is not resolved.

  Any ideas?. I guess that an Intel Rapid Start driver technology is coming.

  Kind regards

  Intel might be the point to approve their Windows 10 pilots, at the same time just keep it disabled in BIOS for now.

• Blue screen errors, hard disk crash and now the windows activation question

  These last six months, I had a problem of error frequent blue screen crash. Suddenly last month the drive crashed, hard my computer didn't load windows on several effors, finally the hard disk had to be changed. Reinstalled the operating system after copying the files of restoration for windows, now windows says is not a genuine copy. Now, today still crash blue screen error after from once again, he says that this window is not genuine. MT laptop is a sony vaio 3 years old and came with a preinstalled windows 7 licenses and the key that I use is one written behind the laptop on the microsoft certificate.

  He seems to have removed the incompatibility of CID at least.

  Please try activating suggestion of Andre now - the system is now simply say that it is out of time, require activation by telephone.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• How can I correct an error of the driver realtek ethernet for windows vista?

  I had my hard drive fail so I went and bought a new and put it in. but when I reset everything I couldn't all internet and I get an error that says something about a fail driver realtek ethernet or something like that. HELP PLZ!

  Hello

  ·         What is the brand and model of your computer?

  ·         What hard drive was causing the problem?

  I would l recommend you follow the steps in troubleshooting section and check if it helps:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  You can also contact technical support for Realtek and check the availability of drivers for Windows Vista.

  http://www.Realtek.com/contact/

• Windows Update error code: C1900101 - 4000D (failed upgrade to Windows 10)

  Hello. I recently tried to install Windows 10 Home in my PC. But the upgrade process froze in 87%. And later, it is rolled back to Windows 7 Home Premium (64-bit) , showing the following error "C1900101 - 4000 D,"

  What should I do to fix this problem and install Windows 10?

  Details of my PC - Acer Aspire Z5771 ,.

  Operating system: Windows 7 Home Premium (Service Pack 1) (64-Bit) (supplied with the PC)

  Processor: Intel Core i5 (64-Bit)(2.50 GHz) (4 cores)

  Memory: 4 GB (DDR3)

  Storage: 1 TB (HDD)

  Graphics card: GeForce of Nvidia and Intel HD Graphics

  Sound: RealTek High Definition Audio and Dolby

  Touchscreen: Yes

  Hello

  Thanks for posting on Microsoft Communities.

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  Please find the link below to find out "how: solve common installation problems and stop errors during the Installation of Windows 10.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

  How to: a list of things to do if the Windows 10 install fails.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-Windows-10-Setup/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  Just reply with the results. I'll be happy to help you.

  Thank you.

• Can I use my drive to upgrade to Windows 7 on another computer because the original is dead?

  Reuse the disks to upgrade?

  I bought the upgrade to win7 Home premium for an XP machine. Update went well. This machine is now deceased, and destroyed hard drive. Can I use my upgrade on another XP machine disks?

  I bought the upgrade to win7 Home premium for an XP machine. Update went well. This machine is now deceased, and destroyed hard drive. Can I use my upgrade on another XP machine disks?

  As far as I know, Yes.

  May need to activate by phone.

• Rebuild (OS disk) drives can re - install Windows after installation of Linux?

  Hi folks,.

  Question: Can the disks to rebuild (OS + pilots) Re-install Windows, after a Linux installation?

  Goal: The goal is to alternate between facilities of OS: Linux - and Windows - and Linux - etc.

  Thanks again, good people.

  Of

  a valued customer

  You have more question?

  If you do not, please click to accept as a Solution to close this case.

  Tank You

  Cristian

• Formatting a hard disk for the upgrade to Windows 7

  Hello

  If I want to install Win 7 one newly buy external hard drive, my I know if I have I can format it using ain XP PC or I need to use a different PC WIn7?

  Thank you

  Low

  You can in the form of any computer.  You need to format NTFS.

• Meet the error code during upgrade to Windows 10 Windows 7

  I encounter an error code: 0xc1900204 during the upgrade of Windows Windows 7 10.  Anyone has idea what the code refers to, and how it can be fixed?

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Make sure your machine name is simple not periods or hyphens or dashes.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

    You can try other things:

    • How to: 10 tips before installing Windows 10
    • How to: 10 things to do if the Windows 10 install fails.