Intel technology quick start error in event visors after upgrade to Windows 10

Similar Questions

• Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  Where can I find a copy of the Windows Vista Quick Start Guide provided with the retail version of Windows Vista?

  I need the Guide quick start, as I have lost mine. A copy of the paper, as in a PDF file or similar.

  Hello

  You can check this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/products/home

• Satellite P50 - B - internal error power after upgrade to Windows 10

  After the upgrade to Windows 10 and after reboot, I got Internal_Power_Error and laptop restarts automatically.
  After signing, get the same error of internal power and the repetitions of the process.

  I contacted Toshiba Support and they did NOT have a fix for this problem.

  The power driver should be updated but no ETA on when the fix will be available.

  Be wary.

  This does not resemble Toshiba problem. The issue (error message) appears due to AMD graphics card driver compatibility issue.
  This seems to be a problem with all computers with a particular AMD GPU.

  Probably the 10 Windows take the old driver (catalyst process) is not fully compatible and the solution could be:
  -graphics card ATI catalyst unisntall
  -updated the driver... (try to download the drivers Win10 for AMD driver AMD site)

  You should be able to update the drivers for the GPU in right click Device Manager the GPU.

  In case the 10 Windows will not find an AMD update, it must simply wait and use the internal Intel GPU that is part of the CPU. This occurs after the AMD/ATI driver has been uninstalled.

• Get the error message after upgrade to Windows 10: peer certificate has no Secure Connection has an invalid signature.

  Error message trying to connect to Facebook after update to Windows 10: secure connection failed

  An error occurred during a connection to www.facebook.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Hey, if you're an avast user, please disable https scanning software:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Firefox crashes at the start even in safe mode after upgrade to version 7.0.1

  Firefox crashes on startup after upgrade to version 7.0.1

  It hangs at the start even in safe mode.

  I tried a complete uninstall and reinstall, but choose to keep all my settings (e.g. bookmarks) etc that I don't want to lose my favorites.

  Your crashreport is
  
  https://crash-stats.Mozilla.com/report/index/BP-24b848e4-7d2a-4cf1-B0B0-31ccd2111021
  
  Report of Crash Firefox 7.0.1 [@ mozcomp.dll@0xab51]
  
  Crash start-up mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V - GO, IBM Tivoli Access Manager SSO
  
  See Bug 680927 for more information
  
  The problem likely is the use of some software Oracle etc., the Oracle Developer being aware of the problem and working on a fix. Meanwhile, there is a hack for registration as a potential solution, or the simpler solution of temporary demotion to firefox 3.6.23.

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• Activation error: 0xC004C003 after upgrade to Windows 10 8.1

  Last September, I bought this computer, it is Toshiba Satellite L50-A-19N, he was originally Windows 8, I've updated for Windows 8.1 and it enabled all the time until the upgrade of Windows 10, now it shows "error code: 0xC004C003" which means that the key is not valid.
  "Connect to the internet to activate windows.

  

  Change product key button does not work, the settings window just freezes and I have to close it using the Manager tasks.

  I found the original key using this script, it's quite different key that is displayed in settings > Privacy page
  http://pastebin.com/THmGQcgk
  

  Running this command

  slmgr-IPK MY47H deleted

  This appears when I try to activate using the original key, at least I think it is original because I got using this vbs script

  Activation of Windows (r), Core edition (2b1f36bb-deleted)...
  Error: 0xC004C003 the activation server determined that the specified product key is blocked

  I read that I can somehow contact toshiba or microsoft for the original for my product key, but I can't find any info contact, or live chat, only in this forum, so I ask here

  Microsoft was told to contact TOSHIBA... How can I contact TOSHIBA for the original key? I have the original key, but I want to be sure if that is true.

• Get several errors everytime I try to upgrade to windows 10 home

  Original title: Windows 7 Home Premium

  Hello

  I was wondering if anyone could help with my updates of windows 7 Home Premium, I was making several mistakes whenever I try to update for windows Home 10 try the software distribution method I tried convenience stores to update windows - including Microsoft Fixit can you help I even tried to use command prompt to auto download the update but still nothing It's a Windows 7 Home Premium DELL paid the Windows installation disc, but I use it on my ACER for the moment so need to I do? I'm ready to give up, my windows update is not even that check updates more and update Windows 10 keeps telling me to try again. Would that be a virus or malware or a rootkit can please someone help to solve my problem if not free then name your price but please someone help?

  Is there a COA sticker at the bottom of the laptop edition with product key indicated on it?

  It looks like the following:

  

  If you see it, try to update the product key values if the edition installed corresponds to the product key on the COA sticker.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  If you are able to get activated, you should be able to upgrade to Windows 10:

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Error message after upgrade to Windows XP on the Microsoft Update site

  I have just taken delivery of a Satellite Pro A120 and updated the XP components on Microsoft Update, windows site when the system has restarted to make the changes he developed an error message during the final phase of the start-up of the user.dll Realtek.

  It basically says that user32.dll was written to memory, because the location, as it was stored was reserved for windows components. The file in question is c:windows\system32\hhctrl.ocx, this caused some components of the system sound not working.

  He advises me to realtek comtact for a new dll? The last player on the download from Toshiba site is older than the one installed. Any suggestion please.

  Thank you

  Hi mohamed

  Thanks a lot for this useful info!

• How can I restore HP Quick Launch and keyboard filter driver after upgrading OS to Win7?

  I've recently updated my windows vista Home Premium x 32 to windows 7 Home Premium x 32

  now, I was aware that drivers wernt going to be supported but had clicked next and now my Quick launch buttons do not work, or my keyboard filter that when I run a troubleshooting tool to find wat is wrong with the problem, it says not installed keyboard filter driver and I installs the latest drivers from HP.com is my ENE CIR driver Buttons to quick launch HP recommend updated all the HP.com drivers on my support page and pilot books, my laptop is A HP Pavilion dv6 Notebook PC product number 1203ax entertainment series

  Please help me correct this problem have downloaded and uninstalled the drivers and still not fixed am very frustrated at this point

  Hi all here is the method I had issue it used to fix my HP 3D drive guard was not install so I went to my device manager and expanded the system properties then clicked on the HP mobile data protection sensor and vivid after all calls from fone to HP and not fixed I took a punt and a good to and driver rollback selected then entered my configuration of sws in c: / and found the player 3D HP installed guard finished without error and restarted and now its fixed try this as a solution if your had the same prob as me

• HP Pavillion 11-N028TU X 360: boot device error after upgrade to Windows 10

  Hello

  My laptop had been improved automatically to Windows 10 about 3 days ago. It was fine, but last night, he had a funny noise and stopped working suddenly. I restarted my laptop, but it has shown a pop-up notification:
  "not found - boot device please install an operating system on your hard drive.

  This morning, I took my laptop to the IT Help Desk at my University, but strangely I could start it and the connection to my windows without any error notification but it took like a usual (about 15 minutes).

  What should I do with my laptop? It seems to work normally now, but I fear that it will freeze again all of a sudden. By the way, anyone know if I can use my warranty to the United Kingdom if I bought my laptop in my home country?

  Thank you.

  HI @rose0521,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that once your laptop cannot start with the error message "not found boot device" and now is recovered, but you want to confirm that there is no problem with the laptop.

  You can follow the document below to test the hardware of the laptop:

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  If you want to contact HP support to check if the warranty covers service to the United Kingdom, please click http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html for more contact information.

  Please let me know if that solves the problem by marking this message as "accept as a Solution.  To simply say thank you, click the thumb upward below!   If you need more assistance let me know and I will gladly do everything I can to help. Thank you.

  Kind regards

• C5550 error after upgrade to Windows 7

  I upgraded my computer to HP Pavilion Elite Windows VISTA Home Premium 64-bit for Windows 7 Home Premium 64 bit. I have a HP Photosmart C5550 printer is connected via USB.  All different printer dialog boxes print operated without problems in Windows VISTA.  The Windows 7 upgrade process without incident and I thought it was full until I tried to adjust the preferences of printer (HP Photosmart C5550) for a print request.  Basically, I like to print things with a low resolution only in black ink and for this I select the Preferences link in the print window.  I was able to select the link Preferences only once and adjusted the print settings according to what I wanted and printed the task successfully.  The next time I tried to print something, I wanted to change my preferences to something with color but encountered the following error:

  Window title: C:\Windows\splwow64.exe

  Address of the 0x5005f6a1 function caused a protection fault. (code 0xc0000005 exception)

  Some or all property pages cannot be displayed.

  Ok

  Select product OK then:

  Operation could not be performed.

  Ok

  At this point I want to emphasize that the print request will display when I select the button print.  I can not simply adjust preferences.  Further study produces the same error message in the HP Solution Center.

  I visited HP website to try to find a solution and:

  1. Uninstalled my printer
  2. Downloaded the last installation file "PS_AIO_04_C5500_NonNet_Full_Win_WW_130_140.exe".
  3. Installed the printer according to the instructions

  Subsequently, I was happy to see I could once more click the Preferences link in the print window, but was quickly disappointed when I received the same exact error messages when I tried to repeat a change in preferences for a second printing (and all) the print requests.

  Any help will be welcomed.

  Thank you.

  Hey TicoBird,

  I am familiar with the error code that you see, but there is a solution available for upgrades of USB. It looks like you don't have run the patch included in the solution, so perform an uninstall/patch/reinstall might fix the problem.

  Also make sure that you download the 64-bit drivers.

  If this solves your problem please let me know.

• Windows Update error code: C1900101 - 4000D (failed upgrade to Windows 10)

  Hello. I recently tried to install Windows 10 Home in my PC. But the upgrade process froze in 87%. And later, it is rolled back to Windows 7 Home Premium (64-bit) , showing the following error "C1900101 - 4000 D,"

  What should I do to fix this problem and install Windows 10?

  Details of my PC - Acer Aspire Z5771 ,.

  Operating system: Windows 7 Home Premium (Service Pack 1) (64-Bit) (supplied with the PC)

  Processor: Intel Core i5 (64-Bit)(2.50 GHz) (4 cores)

  Memory: 4 GB (DDR3)

  Storage: 1 TB (HDD)

  Graphics card: GeForce of Nvidia and Intel HD Graphics

  Sound: RealTek High Definition Audio and Dolby

  Touchscreen: Yes

  Hello

  Thanks for posting on Microsoft Communities.

  I'll be happy to help you with the problem you have with the computer. I understand the frustration when things do not work as it should.

  Please find the link below to find out "how: solve common installation problems and stop errors during the Installation of Windows 10.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-troubleshoot-common-Setup-and-stop-errors/324d5a5f-d658-456c-bb82-b1201f735683

  How to: a list of things to do if the Windows 10 install fails.

  http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-a-list-of-things-to-do-if-Windows-10-Setup/eba3c864-d9fe-4F8E-9468-81b1f89473ed

  Just reply with the results. I'll be happy to help you.

  Thank you.

• After upgrade from Windows Vista to Windows 7 get error 0000 when turn on computer

  I've recently updated my Windows from Windows Vista to Windows 7. Now, whenever I turn on my computer, I get an error message that says ERROR 0000. How can I fix this and what it means? I tried to get help online, but my ID is not recognized. Can someone help me?

  You could try a few things first, check the Action Center in Windows 7 for all possible solutions (click Start, type: Action Center > press enter).

  Then you can also try repair your installation of Windows 7:
  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.

  If the problem persists, try these other suggestions:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Check your hard drive for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.
  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• OBIEE 11 g parse error: error 500 - internal error from the server (after upgrade to 11.1.1.9)

  Hi, I have a problem after the update successfully from 11.1.1.7 to 11.1.1.9. All the upgrade steps are successfully completed. But the analysis is down with the error below. Presentation server seems to be down and will not start. Sometimes it starts and still the same error. Any help would be appreciated.

  Parse error:

  Error 500 - Internal server error

  bifoundation_domain.log / bi_server1 - diagnostics.log

  < 3a6e0f40214b390d:-386ebfa2:14e69d6303c: - 8000-0000000000000023 > < 1436294858264 > < OBI-SEC-00101 > < failed validation of the system – the system user profile user is not found in the identity store.

  oracle.bi.security.service.UserProfileNotFoundException

  at oracle.bi.security.service.URIdentityStoreProvider.getUserProfileHolder(URIdentityStoreProvider.java:378)

  at oracle.bi.security.service.SystemUserValidator.validateSystemUserProfile(SystemUserValidator.java:224)

  in oracle.bi.security.service.SystemUserValidator.access$ 100 (SystemUserValidator.java:32)

  to oracle.bi.security.service.SystemUserValidator$ 1.run(SystemUserValidator.java:116)

  to oracle.bi.security.service.SystemUserValidator$ 1.run(SystemUserValidator.java:110)

  Thank you

  RC

  The problem has been resolved by removing the Active Directory (MSAD) of the list of suppliers and creating a new bisystemuser in the defaultauthenticator.