Error in Media Center after installed XP3

Similar Questions

• loss of Windows Media Center after a recovery of systems (Vista 32 bit)

  loss of Windows Media Center after a recovery of systems (Vista 32 bit) this happened after a recovery of systems has fallen without a current backup.

  Hello

  you don't say what you used to perform a recovery of vista

  Family Vista premium and vista ultimate both come with Windows Media Center

  other versions of vista does not come with Windows Media center

• Error: "Windows Media Center has stopped working. Windows is checking for a solution. "when tried to open it after installing the KB983590 update

  Original title: WMC no longer works after update of August 10

  Windows Media Center has stopped working after installation of my Windows 7 Professional pc all 11 updates gave me on August 11, 2010. I used system restore to the day before the updates, and install them individually. The first 9 no trouble with WMC. But the IE8 KB982664 for Windows 7 compatibility view list caused my action center to report that I needed to check the undeclared solutions to problems. WMC would still start. But after installing KB983590 .NET framework 3.5.1 for Windows 7 x 86, WMC has stopped working.

  After you uninstall update 2 above WMC would still not start.

  After using the system again restore forward updates, I installed the other 9 updated with, so far, no problem with WMC.

  New installation of Windows 7 Pro.

  V.1.0.1963.0 MSE completely up to date. [have not installed the latest beta version due to this problem]

  Former pilot Mig15. Now using Windows 7 Professional and Project Professional 2010 Beta.

  Hi Davy-D,

  Step 1: Perform the upgrade on the spot
  a. close all applications, insert the DVD into the DVD drive of the computer.
  b. in the settings window, click install now.
  c. click go online to get the latest updates for installation (recommended).
  d. type the CD key if you are prompted to do so.
  e. click Yes to accept the Microsoft software license agreement.
  f. on the type of installation do you want? screen, click upgrade.
  g. when the installation is complete, restart your computer and check the difference.

  See Method 2 of this article: http://support.microsoft.com/kb/958044/en-us

  Very Important: Run a repair installation will not damage files and applications that are currently installed on your computer. However we recommend that you back up data, performing the steps incorrectly can delete data.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message - Media Center had to close after you install the updates in the Windows XP computer.

  Original title: Media Center error and close message.

  I received a windows update last night and when I restarted my computer I got an error message that Media Center had to close. I sent error report, but the error message comes back upward. How fix the error or at least get rid of the error message?

  Hi PaulArnesen,

  Update that you installed before the problem?

  (a) that you try to run the system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  (b) later, you can manually download the update from the Microsoft Download Center and install it.

  Hope the helps of information.

  Please post back and we do know.

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• How to re - install Windows media center after it was restored by default

  my pc has been restored by default and now it says I have to re - install windows media center and many other programs

  Hello

  Media Center comes with vista Home Prenium and Vista Ultimate editions, not Vista Basic or Vista Business

  If you have problems after you use manufacturers recovery process contact the manufacturer

  It's their recovery process not microsofts

• CREATIX card TV no longer works for Windows Media Center after you install Vista Edition Home Premium to Windows 7 Professional

  I recently updated my computer Windows Vista Edition Medion Home Premium to Windows 7 Professional. While my computer was running Vista, I could use the tuner TV SAA7131 Creatix card in my computer to watch digital TV British, that is to say Freeview. Before my upgrade to Windows 7, I checked all my drivers would be compatible, and the Advisory program told me that they would be sufficient. However, when I tried to setup of the library to receive a TV signal, the implementation will not progress beyond the screen "Considering television signals" Percentage of completion bar gets to about 90% and then does not move, or entirely 100%, but the screen does not change, and if I try to return to the main menu screen, Windows Media Center crashes with the 'circle of rotation of loading"and does not change.

  I reinstalled Cyberlink Home Cinema after realization of the Medion TV improve extra that comes with it, but that didn't seem to help. The same problem persists.

  I have still the disk with the drivers on, but I'm not sure how to reinstall the drivers using the disk, because the record for drivers TV Tuner does she not an executable file, just a series of system files, application extensions and the DAT files.

  Any help would be greatly appreciated.

  You must find the CTX driver version in the code of your tv card provider (poster Device Manager it under hardware ID in the Details tab) in the list of suppliers PDF in the FAQ section of the site Creatix. Then, you can download the right CTX driver from the support section. Is there a Windows 7 driver for my SAA7131 card.

• Error in device IO after installing Vista on Satellite A105-S334

  Need help please!
  Recently, I did a full restore of my computer Toshiba Satellite laptop.
  My computer came pre-installed with Windows XP Media Center edition.
  I had upgraded to Windows Vista, which was one of the worst computer decisions I had made.

  That's why... I did the full restore with the factory restore disk that came with my laptop.
  Before restoring, my CD player worked fine.

  Now all I get is an error message "the request cannot be performed because of an i/o device error."
  When I put in the disc, I can hear it turn. I see even my mouse cursor will turn to a disc as if she was about to open the drive, but the error message.

  I tried to reinstall the driver... no luck. I also tried to change IDE properties that don't seem to work either.

  Someone please help!
  If it helps, I have a rug * drive his DVD Ram UJ - 841 S Satellite A105-S334. I can't boot any CD, however, if a disc contains a few documents, it will open up very well!

  Help, please.

  Stand by. I'm a bit confused.
  If I understand you right you can use the drive as a boot device and boot media is readable, but you cannot use the drive just under the operating system. Am I right about that?

  Have you noticed this problem right after the clean install of OS? Did you remove some pre-installed software components? Did you install additional software for burning CD/DVD?

  Also check this Microsoft document http://support.microsoft.com/kb/891894

• Error Windows Media Center full disk, but the disk is not full?

  Watching TV Live I get a 'Disk full' error after 10-15 minutes of watching (HD if it matters) telling me to delete recorded programs or assign another drive. I havenotregistered program and my assigned drive has 50 GB of free space with 40 allocated in the WMC settings for recording/tv live (although I have no record).

  I want to wrong thinking that 40gigs of free space should be much to just watch live TV?  It should not just delete the buffer to rewind etc once it fills up?

  PS once I get this message if I closed and reopened WMC, he worked for another 10-15 minutes, then gives the same error.

  Edit - don't know why, but this ended in forum music and sound

  I had the same problem and found that not a single one of these solutions has solved my problem.

  I solved it by making a backup copy of the recorded TV (c:\users\public\public TV recordings) directory and then delete this directory. When you open Media Center, it seems to recreate the directory hidden in the directory recorded TV (\temprec), which is used for the live TV buffer, freeing all the corruption that may have already.

• video error in media center, will not play videos or DVDs

  I cannot read the DVD, Live TV, or ripped movies in Media Center on my computer (64-bit) of W7. I just upgraded to W7 (64-bit). However, I can play all content in Media Player. I read somewhere that MC uses 64-bit and 32-bit codecs MP codecs. Can I register the 64-bit codec or fix them somehow without completely re - install W7?

  I found what was the cause of my video error message in MC. I had to disable the functions of exclusive Mode on the Advanced tab in the Audio properties for my audio device.

  1. right click on the speaker icon at the bottom right of the screen

  2. click on playback devices

  3. Select your audio device by clicking on it.

  4. click on properties, below on the right.

  5. Select the Advanced tab.

  6. the functions of exclusive Mode deselect the option and click on apply.

  Who did it for me. Everything works 100% now. Finally!

  Hope this helps you or someone else here with the same problem.

• Error ink system Oxc19a0042 after installing new ink cartridges 564 in Photosmart B209a

  After installing real 564 HP cartridges in a printer Photosmart B209a, screen reads incompatible cartridges, and the printer went to err Oxc19a0042 ink system. Have you tried to unplug it, put the old cartridges, etc. and yet cancel the error and print. It's unused cartridges HP 564. Why are they incompatible and what can I do to solve the problem?

  This document on the 0 x.rror can help:

  http://support.HP.com/us-en/document/c03081973

• XP Media Center - re-installed, can't activate

  Hello

  In 2009, I bought an Acer laptop with XP Media Center for my friend. The Windows certificate of authenticity is on the system and legible.
  A while ago, I had to have the operating system reinstalled by a local computer store because the OS disks got misplaced.
  I want to bring this system into service.
  When I started it yesterday, I reached the activation screen and choose to activate online.  The field to enter the COA was not active.  So I tried a second time with the same result, the system stops.
  I rebooted the system, and this time, choose to use MS support for telephone activation.  Before I could copy down all the numbers of the screen activation or phone number the closed system.
  When I try to restart now, the system will stop until I get to the activation screen.
  What now?  It is a legitimate version of Windows on a belonged to a user system, a disabled elderly person.
  Thanks in advance for your help.

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Language Runtime Debugging Services process ID current errors in Media Center

  Separated from:  http://social.answers.Microsoft.com/forums/en-us/mediacenter/thread/c6d65a01-000b-4abf-a0a9-40c1ade236cf

  It did not help me, still the same problem.

  Try this: -.

  Start > run and type: cmd

  in the command prompt window, type the following commands and press ENTER after each command of the: -.
  Type: regsvr32.exe atl.dll
  Type: cd.
  Type: windows cd
  Type: cd eHome
  Type: ehSched /unregServer
  Type: ehSched/service
  Type: ehRecvr /unregServer
  Type: ehRecvr/service
  Type: ehRec.exe /unregServer
  Type: ehRec.exe/regserver
  Type: ehmsas.exe /unregServer
  Type: ehmsas.exe/regserver
  Restart the Media Center

  S.Sengupta Media Center MVP

• I get the error 66 has code after installing IE9.

  original title: 66A error code

  I received this error 66A code after installing IE9.  Low IE9 loaded correctly but the update of security for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008 x 86 (KB2446708)

  will not be down load. This is the important part?

  Roxanne Conway
  http://go.Microsoft.com/fwlink/?LinkId=204898

  Help

  and support:
  http://support.Microsoft.com

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha