Error of the IDE controller after using vCenter Converter Standalone

Similar Questions

• Windows 2008 R2 VM disk system increased substantially after moving from VM to ESXi host 5.1 to 5.5 ESXi host using vCenter Converter Standalone

  Hello:

  I moved a Windows 2008 R2 VM from a 5.1 ESXi host to an ESXi host 5.5 using vCenter Converter Standalone.  The c: / drive system passed largely to where I now have to extend the volume.  Is this normal/expected behavior?  Perhaps the conversion/move creates temporary files I can delete?

  Thanks much for the ideas.

  This is not the expected behavior.

  Size of the disk is defined during the conversion and which will not increase by its own during conversion.

  Now, you need to V2V, if you want to reduce the volume.

• Internet connection lost because of the error of the Ethernet controller after installation of the OS

  OK, I installed Windows XP3 Pro on Windows XP2 Pro on my computer of friends because of severe virus problems. However after installation, the controller Ethernet, video card, etc. also took out drivers. The computer manufacturer is no longer available, and some drives are available with these drivers. So is it possible to get the drivers on the system in order to restore the Internet connection? How can I determine what drivers to install?

  Open "Device Mamager" and search for points of question marks (?). Also make a list of all the drivers that are listed.

  Uninstall SP3: How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249/en-us

  If you still have a restore point made just before you install SP3, I'd
  Uninstall SP3 and then use the system restore, I hope that the combination will
  get you where you want to be.

  Now open the Device Manager"again and compare the list of SP3 for what is currently enrolled. Now you have a list of these drivers you need.

  Don't forget the video drivers: visit the download of the manufacture of the graphics card: download and install the latest Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• How to add the new nic to target VM using vCenter Converter SDK?

  Hi all

  I use vCenter Converter Standalone program to add new nic for VM.

  Then, I tried to use the following code to add a new computer virtual network card, but it failed.

  The log indicates an invalid argument for the addition of NIC.

  What should I change to these settings?

  Network ConverterNetworkParams = new ConverterNetworkParams();
  ConverterNetworkParamsNicParams nic_info [] = new ConverterNetworkParamsNicParams [1];
  nic_info [0] = new ConverterNetworkParamsNicParams();
  nic_info [0] .setConnected (true);
  nic_info [1] .setConnected (true);
  nic_info [1] .setConnected (true);
  network.setPreserveNicCount (false);
  network.setPreserveNicMapping (false);
  network.setNic (nic_info);
  cloningParams.setNetworkParams (network);

  Thank you

  Scott

  ConverterNetworkParamsNicParams nic_info [] =
  new ConverterNetworkParamsNicParams [1];
  NIC ConverterNetworkParamsManagedNicParams =
  new ConverterNetworkParamsManagedNicParams();
  nic.setNetworkName ("the VM network");
  nic_info [0] = nic;

• VMware vCenter Converter Standalone 5.5.0 build-1362012 - unknown internal error trying to P2V Windows Server 2003 SP2

  I have a box of Windows Server 2003 SP2 Standard that fails to convert using vCenter Converter Standalone 5.5.0 build-1362012. After you submit the task in the wizard's GUI, I get "a general error has occurred: unknown internal error". A virtual machine is created and deleted and then a few moments later.

  Create the virtual machine

  192.168.1.201

  Completed

  Search entity by UUID

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Remote disk open read-write

  Completed

  Search entity by UUID

  Completed

  Delete the entity

  SRV-cspnsn. CSPNSN.local

  Completed

  The destination is VMware ESXI version 5.5.0 build-1623387 managed by vSphere Client version 5.5.50 build-1618071. The destination data store is a 5.60 VMFS volume with block size of 4 MB, on a local SATA HDD with 923, 50GB.

  Both machines are in the same network and have no any King or firewall or ACL in switches.

  In the log file, the only error is "error"Ufa.HTTPService"] Impossible to read the application; "flow: io_obj p:0x03403f24, h:-1, < tube"\\.\pipe\vmware-converter-server-soap">, < pipe"\\.\pipe\vmware-converter-server-soap"> >, error: class Vmacore::TimeoutException (Operation timed out).

  Any help would be appreciated.

  Thanks in advance.

  Hi all

  Once the converter VMware-converter-en - 5.5.1 - 1682692 does not work, with a touch of friend uninstall the 5.5 version of Converter Standalone Client, look for the VMware converter version - 4.0.0 - 146302 and install this version to the other machine. No not that I had to be Converter, but the windows 7 Pro 64-bit.

  After this race, the Standalone Client 4.4 Converter and everything work fine.

  Now I have the P2V converted and good machine, as was the real operation!

  I thank all of you.

  Best regards

  ADAJio

• Errors from the linker resettlement after 10.2 software development kit update?

  Hello BBRY devs.

  Someone known errors from the linker relaction after upgrade of NDK 10.2 when linking to create in-house static libraries to the executable?

  / Applications/Momentics.app/host_10_2_0_15/darwin/x86/usr/bin/ntoarm-ld:... /... /.. /.. /.. (/ Engine/lib/blackberry/Device-Release/libEngine.a(VMUtil.o): relocation R_ARM_THM_MOVW_ABS_NC against 'a local symbol' can not be used when an object shared; Recompile with - fPIC

  .. /.. /.. /.. /.. / Engine/lib/blackberry/Device-Release/libEngine.a: could not read symbols: bad value

  Compile static libraries with - fPIC seems to fix the problem, however, curious as to why this has just creeped upward. Perhaps from the old project files using different default compiler settings?

  Thank you

  Stéphane

  Hello.

  That's a likely scenario.  There was a 10.1 change that had t be solved with - fPIC, but that latest IDEs use models that account for it properly.

• How can I get rid of the razor tool after use.

  I am a new user.  I can't get rid of the razor tool after use.  Help

  Press a to return to the normal cursor. or use the tool window.

  

• Save an ESXi 4.0 virtual using the VCenter Converter Standalone

  I'm having a 'moment' here because it's been a while since I've done it.

  I have a Windows Server 2008 virtual machine running on ESXI 4.1. I want to make a one-time backup of the virtual. It's a Terminal Server I don't need of daily backups, etc.

  I have it in mind that I can do this with the VCenter Converter Standalone. I downloaded and installed version 5 of this.

  When I tried to communicate with the virtual virtual "Machine VMWare Infrastructure" using the converter drop-down I get this:

  Unable to reach the specified host 192.168.254.154. The host may not be available... or management on this host services do not react.

  The IP address is correct. Am I missing something here? Management services? I put the VM converter on this virtual server Client?

  The goal is to get the hard local machine in order to restore it in case of failure.

  Thank you very much.

  Mike Gallery

  you will need to have comments turned off for export as OVF, but you don't need to use the converter.

  Also, in the future, if you use the converter and a source of 'VMware Infrastructure virtual machine', the virtual machine must thus put off.

  .. .and to return the FVO in your inventory... File - deploy OVF

• Windows Server 2003 x 64 conversion using VMware vCenter Converter Standalone Boot CD error

  Hi all

  I downloaded "VMware vCenter Converter Standalone" v 4.0 and from this directory

  C:\Program VMware vCenter Converter Standalone

  I was able to find these ISO files:

  Converter-helper-vm - x 64 .iso - & gt; I have burn the CD it and then perform the reboot

  converter-for assistance - vm.iso

  However, during the boot, he went into the start of linux, and then he asked me a login and a password?

  What should I type here then?

  My goal is to be able to convert this physical machine in one. File VMDK to load later on ESXi or VMWare Server 2.0

  Thank you.

  Have you tried domain user and password?

• Restore-error vCenter Converter Standalone / Server

  Hi guys,.

  It's my first post in the VMware community and I'm looking forward to many useful discussions. Back to my problem...

  I have a serious issue in our virtual environment. Last weekend, I had to restore a virtual machine to a backup vcb. My first idea was to import the machine with the vCenter Converter 4.1.0. So far so good... I chose the .vmx of the virtual machine, which lies directly on the hard disk server vCenter ( file://hostname/e $/vm/vm.vmxUNC path) connection references: domain\administrator (access rights are set correctly)

  After a few seconds, I get the error message: cannot open the file file://hostname/e $/vm/scsi0-0-0-vm.vmdk (the name of the file is of course correctly)... ok, now I'm going to started to sweat... not only for the reason that it was Sunday morning, no, the virtual machine is our production database, and I could not restore it O.o

  Okay, the next idea was to import the machine with the vCenter Converter standalone, that is installed on my workstation. Source type is again Image backup, machine virtual file is always on
  hostname/e$/VM/VM.vmx--... we'll press next... and what past? Error: agent.internal.fault.FileOpenError.summary... have I said already, that the virtual machine is our most important server?

  2 hours later, I finished the installation of the new database server that was not the way things, I want to do...

  Monday: I couldn't believe it, the backup is corrupt... so I copied the files on my local drive on my computer and tried again... what my eyes see? It work fine? Now, I really couldn't believe it... If files is located directly on the vCenter server, it does not work and if the files are on my computer, it works correctly?

  can anyone help my in this matter? I really have no explanation for such a mistake...

  Thanks in advance for your help

  was soon Andi

  PS: I'm sorry for my English, but it is not my native language

  lights,

  There is a KB on a topic like this:

  "DISKLIB-LINK:
  host\e$\vm\scsi0-0-0-VM.VMDK': cannot open (the file is too large).

  Conversion fails when the source or destination do not support large files

  http://KB.VMware.com/kb/1008633/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• VMware vcenter converter standalone physical conversion to virtual stuck to the completion of 81% for several days

  Hello everyone I have an interesting question, I'm physical conversion to virtual pointing to the new virtual directly on the server esx conversion would set schedule for a day. But now, it's just stuck at 81% and not go further! I don't get any errors of ideas? questions are there a basis that I can look to see what is happening? Is there a way I can fix it without start over again. There are enough resources on the destination esx I had to change the hard drive space for destination and ram, but done nothing radical imprint more small which I think should do better.

  It's an interesting case, you have here. I guess that conversion is complete, but somehow you do not see or a deadlock occurred.

  Anyway you will probably be able to export logs to the customer. Go to the directory of newspapers to %ALLUSERSPROFILE%\Application Data\VMware\VMware vCenter Converter Standalone\logs (for WP/W3K) or vCenter Converter Standalone\logs %ALLUSERSPROFILE%\VMware\VMware (for Vista +) and find the log of the last worker (vmware-converter-worker - .log #). The status of the conversion is currently connected. Take a look, or that she has finished, is still running, is stuck.

  If he has you can try restarting the client and/or server converter service. Do not stop the worker service unless you are sure that there is no conversion running!

  HTH

  Plamen

• Can't access file system host (MAC) shared in VMware vCenter Converter Standalone Client when wanting to create a VMware image (Windows 7 in Parallels virtual machine running on a MAC) for the option of machine Powered On.

  File HOST (Mac) system is currently shared in the Parallels virtual machine and is accessible through Windows Explorer and works correctly in the Virtual Machine environment, however, after installing vCenter Converter application on the Windows virtual machine these shared folders are not accessible from the conversion tool in the selection of the target destination of the file VMware (s). I can't select an existing folder on drive "C:" to write the image so that there is not enough space available for the VMware image and it must be written in a different file system, while the image is being created.

  Anyone know a way around it to show the target to write the image on the host (MAC OS) file system or is it a bug?

  Thanks for the reply.  It seems that the maps are not displayed if they were created as actions by the hosts.  When I created a mapping directly from Windows, then this mapping appeared and the conversion worked fine.

• Virtual to virtual using vCenter Converter

  Hello

  I want to convert a computer virtual located in host esx3.5 to vSphere using vCenter Converter.plz someone can help me that Morel will make me convert successfully. I don't have all the documents and videos about V2V using P2V. while I am not able to do.

  Please help me in this regard.

  Thanks in advance

  Suresh

  http://www.VMware.com/support/pubs/vcc_pubs.html

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• y at - it an easy way to convert w7 64-bit with VMware vCenter Converter Standalone

  Hallo

  I am struggling with the VMware vCenter Converter Standalone with windows XP everthing works well...

  I would like to convert a 64-bit Windows 7 computer and run it on a windows 7 64 bit with vmware player > 4

  I get a blue screen and message windows cannot be bootet normally...

  Thanks for any help

  was soon rene

  Welcome to the community,

  It is most likely a problem with the virtual drive created for the converted virtual machine controller. Unless you specify the correct controller ("LSI Logic SAS' for Windows 7) type in the Converter Wizard, you can end up with an IDE controller.

  André