Error in PortalObjectsFactory.CreateSession: Init has not been called.

Similar Questions

• RMAN-04006: auxiliary database error: ORA-12504: TNS:listener has not been

  HIII...
  
  I was doing my dataguard configuration, my primary side is a 2 node RAC and my stand by is a single node.
  IM using the database and 11 GR 2 grid infrastructure.
  
  When I try to connect to the rating system standy priamry using RMAN im getting the following error.
  
  [*[*Oracle@Rac2 ~] rman target $ / auxiliary sys / sys@to_std *.
  
  Recovery Manager: release 11.2.0.1.0 - Production on Thu Sep 29 20:39:04 2011
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
  
  connected to target database: RAC (DBID = 2346715690)
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04006: auxiliary database error: ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA
  
  
  My tnsnames.ora file is as follows
  
  to_std =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp (PORT = 9999))(HOST=datagrd))
  )
  (CONNECT_DATA =
  (SERVICE_NAME = STB.msftpnq.com)
  )
  )
  
  
  and my listsner.ora file is as follows
  
  list_std =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = tcp (PORT = 9999))(HOST=datagrd))
  )
  )
  SID_LIST_list_std =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = STB.msftpnq.com)
  (SID_NAME = STB)
  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
  )
  )
  
  
  Please can someone help me to solve the issue.
  
  
  Thanks in advance.

  change the string Service_name in the tnsnames.ora file in the following and try again

  (SERVICE_NAME = STB) will be replaced by (SERVICE_NAME = STB.msftpnq.com)

• Windows 7 with the same error message of "Notfication dll has not been registered, program will not work correctly."

  This error message has started to come after have been a Setup screen saver display in Control Panel. It doesn't seem to do anything "not work properly", but it's pretty disgusting to see this error message every time. May is going to help me?

  Ann Snyder

  Coldwater, KS

  Hello

  If you know the name of the dll file, you can register it manually of elevated command prompt:

  Regsvr32 fullpath\yourfilename.dll

  How to run as administrator command prompt (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• cellForAtIndexPath has not been called in ViewDidLoad()?

  Hello everyone,

  I made a simple application chat which is analysis by Protocol NSXMLParserDelegate an XML file from public API and shows pictures of cats in a TableView. It works fine, but I'll try some refactoring. I did a CatsDataSource like! Class NSObject when it's analysis and calling tableView functions that are part of the UITableViewDataSource. I have put in my main ViewController an instance of the CatsDataSource class and put my catsTableView.dataSource IBOutlet = instance CatsDataSource, also for the delegate. It works but partially. Only when I call reloadData() from a random function, which is a function of the randomize images of cats in the tableView.

  I found that this tableView cellForRowAtIndexPath func was called at all in ViewDidLoad(). He only called when click on random function. (what is IBAction func).

  Thnaks.

  Bojan

  Bojan

  1 viewdidload function is * only called a time * when the viewcontroller is built, the accent * ONLY once *.

  2. when uitableview is built, cellForRowAtIndexPath function is called, but only a few lines, which is displayed, is called

  Ex: you have 30 rows in tableview, but only 3 rows is shown = > cellForRowAtIndexPath is called 3 times.

  What load scroll to the end of tableview = > cellForRowAtIndexPath is called again to load the next row to show

  We hope to help your problem.

  See you soon ~ ~

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• 6000 wireless mouse does not work with error Windows XP "it has not been verified with the Windows XP Logo."

  Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
  I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.

  Dave

  Hello
  The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.

  Mobile Mouse 6000 wireless

  http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support

  You can also get in touch with Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• iTunes has not been installed correctly. Error 7 (Windows error 126)

  I tried to update itunes and I get the following error. ---------------------------

  iTunes.exe - Unable to locate component
  ---------------------------
  This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem.
  ---------------------------
  Ok
  ---------------------------
  When I try to re - stall get the same error.
  ---------------------------

  iTunes

  ---------------------------

  iTunes has not been installed correctly.  Please reinstall iTunes.

  Error 7 (Windows error 126)

  ---------------------------

  Ok

  ---------------------------
   
  Original title: itunes problem

  Hello

  Uninstall everything according to the instructions from Apple:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• ERROR "the system has not been modified" when you try to install a game.

  Hey guys, I am trying to install a game called Smite but a little while in the installation, I get an error that says that "the system has not been modified. To install this program at a later time, run the installation again' can someone tell me how to solve this problem? I am running Windows Vista 34 bit

  Hey Connor,

  I wish that you contact the support of game from here-

  www.hirezstudios.com/smitegame.

  Back to us for Windows issues, and we will be happy to help you.

• Error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. Unplug all printers on this port, and then delete this port.

  Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?

  I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc

  Hello Apollo,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.

  Perform the steps in the link to uninstall Redmon.

  http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39

  Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• KB936330 custody relocation, uanable to install Norton 360, error that it is not compatible because service pack 1 has not been installed

  Original title: KB936330 custody relocation

  After starting without error black screen display problems indicating "start with vista or run diagnostics" etc. I did a full restore. A few problems with windows update which has finally been overcome themsevlves except 1. Service pack KB936330 continued to come as needing to be installed although the "installed updates watch it 8 times successfully installed.". When I try to reinstall Norton 360 I get error that it is not compatible because service pack 1 has not been installed. Run Microsoft Fixit and found the updates installed in different place and has been corrected, but problem persists.

  Hello

  1. you receive an error message?

  2 are you able to install other updates successfully?

  Check out the following link to check the status of the Service pack installed on your computer

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can follow the steps in the following article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important: The article mentioned above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the following link:

  Back up the registry      

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  To install Norton 360, you can follow the process.

  Step 1:

  You can try to completely uninstall Norton 360.

  Check out the following link to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Check the following link to install Norton 360 again.

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Post back with the results for you help more.

• Windows Update has not been installed successfully in 8 months (error codes: 8007371B & 643)

  original title: Windows Update has not been installed successfully in 8 months

  Windows needs to install 7 updates each time I receive the notification. in any case, he attempts and succeeds only and him remains always fail. Those who succeed keep be redownloaded too, so I really have no idea if it's REALLY successful.

  Error codes:

  Code 8007371B

  Code 643

  And the last 4 are as follows:

  Code 8007371B

  The success is always to:

  A security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)

  Thank you

  -Mike

  Run the tool and then try WU.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

• error: 'PositioningMethod' has not been declared

  error: 'PositioningMethod' has not been declared

  This error occurs after I've solved another issue in:

  http://supportforums.BlackBerry.com/T5/Cascades-development/error-QGeoPositionInfo-does-not-name-a-t...

  Am I missing some setting out?

  Should what file I include to PositioningMethod?

  See what... http://supportforums.BlackBerry.com/T5/Cascades-development/error-QGeoPositionInfo-does-not-name-a-t...