Similar Questions

• AxesOrientationMode has not been declared?

  I have a project of cascades c ++ which uses QCompass.  I understand the at the top of the hpp file.  I have a compass to level class named m_compass.

  In the pro file, I added the CONFIG += mobility and sensors += MOBILITY

  In the cpp file, I have this:

  // at the top
  using namespace QtMobility;
  //...
  // in the constructor
  m_compass->setAxesOrientationMode(AxesOrientationMode::FixedOrientation);
  

  It gives me the error:

  'AxesOrientationMode' has not been declared
  

  But it seems that its share of the file Compass.  I'm guessing that I'm missing an inclusion, but can't find that one.

  Did not use this API but seems the enum is declared in the QCompass class itself. Try:

  m_compass-> setAxesOrientationMode (QCompass::FixedOrientation);

• My Epson stylus photo R1800 printer will not install and keep driver error 28 has not been installed

  Original title: my Epson stylus photo R1800 printer does not install. I get error 28 driver has not installed... I need help that I have tried everything I can think...

  I had one installed R800 and I used it for about 2 hours. Then he disappeared. I tried everything to reinstall it and no luck (error 28) now, I've upgraded to R1800 and same problem... Someone had the same problem?

  Hi Roy,

  I am sorry to say that the Epson Stylus Photo R1800 printer is not compatible with the Windows 7 operating system.

  I suggest you to check the system requirements for the printer from the link:

  http://files.support.Epson.com/PDF/r1800_/r1800_01ug.PDF#page=103&view=FitV&pagemode=none

  I also suggest you to install the drivers for the printer in compatibility mode and check from the link:

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

   

  For reference:

   

  What is program compatibility? :

  http://Windows.Microsoft.com/en-in/Windows7/what-is-program-compatibility

   

  If the problem persists, then I suggest you to contact support Espon from the link:

  Contact Epson Support:

  http://www.Epson.com/cgi-bin/store/AboutContactUs.jsp?BV_UseBVCookie=Yes

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

   

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• PDF has not been configured for this web server-2008 Server

  Hello
  
  Try to open a report in preview PDF in the workspace and get the error "" PDF has not been configured for this web server ".
  I use a 32-bit server and hyperion 2008 11.1.1.4...
  I already installed Ghostscript 8.51 in my server...
  
  Thank you

  Yes, I got the solutions... .i need to run the HRprinters.exe then I restart EN and pool services

• "HH_GET_WIN_TYPE has not been specified" in Robohelp 9 HTML

  Hello. I know that this error has been around before, but I have found no solution to my problem. I imported a Robohelp x 5 Robo 9 HTML project, and everything seems to import fine. I compiled the project and everything works except when I try to go to a topic by clicking on the TOC link. Then I get the error "hh_get_win_type has not been clarified" and if I click on the message, subsequently, it will go away, and then the section will open correctly. (All links in the main frame work correctly without error message). Obviously, I need to fix it before you send it. A specific window that he mentions is not used in the project settings, so I just can't remove it. Does anyone have a suggestion for this? Thank you, Mark.

  Well, one more thought. There is a space to specify the default window for the table of contents and Index. I think that under the button Advanced Settings change the screenshot posted above. See if the default window in the tabs of this dialog box have the incorrect window selected.

• photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  can I do or just wait for someone to fix it

  photos has not been loaded for weeks (usually the browser chrome on PC windows at work).  I tried now on some other computers and get the same error message and I report every time.  is there anything I can do or just wait for someone to fix it?

  If you want any help here, you'll have to tell us what the error message.

  Which report you errors to?

• 6000 wireless mouse does not work with error Windows XP "it has not been verified with the Windows XP Logo."

  Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
  I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.

  Dave

  Hello
  The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.

  Mobile Mouse 6000 wireless

  http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support

  You can also get in touch with Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• How to uninstall microsoft no product which has not been installed good product is intunemp3 (error windows cannot install acsess)

  I downloaded intunemp3 to get music, but it did not work properly so I tried to uninstall the product and all I get is (error windows cannot install acsess, this can happen if the installation program has not been installed correctly) and as it happened I met other problems which I think may be related to the first problem. When I use my system tools to defragment files, it only that Flash and never starts, when I try to download windows updates they fail.even when I try to run a security scan the sas error McAfee has encountered a problem please click Home and try again. can any body out there help me out?

  Thank you

  Donald

  Try to do a system restore: click on start, all programs, accessories, System Tools, System Restore.  Then choose the restore point from when itunes tried to install.  If this does not work, let me know and I can give you another way to do it.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• iTunes has not been installed correctly. Error 7 (Windows error 126)

  I tried to update itunes and I get the following error. ---------------------------

  iTunes.exe - Unable to locate component
  ---------------------------
  This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem.
  ---------------------------
  Ok
  ---------------------------
  When I try to re - stall get the same error.
  ---------------------------

  iTunes

  ---------------------------

  iTunes has not been installed correctly.  Please reinstall iTunes.

  Error 7 (Windows error 126)

  ---------------------------

  Ok

  ---------------------------
   
  Original title: itunes problem

  Hello

  Uninstall everything according to the instructions from Apple:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-AU/HT204275

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• ERROR "the system has not been modified" when you try to install a game.

  Hey guys, I am trying to install a game called Smite but a little while in the installation, I get an error that says that "the system has not been modified. To install this program at a later time, run the installation again' can someone tell me how to solve this problem? I am running Windows Vista 34 bit

  Hey Connor,

  I wish that you contact the support of game from here-

  www.hirezstudios.com/smitegame.

  Back to us for Windows issues, and we will be happy to help you.

• Error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. Unplug all printers on this port, and then delete this port.

  Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?

  I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc

  Hello Apollo,

  Welcome to the Microsoft community where you can find all the answers related to windows.

  According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.

  Perform the steps in the link to uninstall Redmon.

  http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39

  Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• KB936330 custody relocation, uanable to install Norton 360, error that it is not compatible because service pack 1 has not been installed

  Original title: KB936330 custody relocation

  After starting without error black screen display problems indicating "start with vista or run diagnostics" etc. I did a full restore. A few problems with windows update which has finally been overcome themsevlves except 1. Service pack KB936330 continued to come as needing to be installed although the "installed updates watch it 8 times successfully installed.". When I try to reinstall Norton 360 I get error that it is not compatible because service pack 1 has not been installed. Run Microsoft Fixit and found the updates installed in different place and has been corrected, but problem persists.

  Hello

  1. you receive an error message?

  2 are you able to install other updates successfully?

  Check out the following link to check the status of the Service pack installed on your computer

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can follow the steps in the following article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  Important: The article mentioned above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the following link:

  Back up the registry      

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  To install Norton 360, you can follow the process.

  Step 1:

  You can try to completely uninstall Norton 360.

  Check out the following link to uninstall the program.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2:

  Check the following link to install Norton 360 again.

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Post back with the results for you help more.