Error in proceso virtualizacion

Similar Questions

• Equipo physical Exchange 2003 Virtualizacion

  People:

  Hace unos dias realice the virtualizacion of a server of a Exchange 2003 a TIB con (Acronis) starting from UN archivo VMware vCenter Converter Standalone. El proceso is realizó sin problemas. Luego montar el equipo, configurar el red useful again e instalar los VM aditions, este inicio con errores Comunicación con los DCs.

  Is el proceso virtualizacion are material to UN cambio como of (if no me equivoco) tender that perform Exchange/disasterrecovery reinstalacion una y luego el ultimo restore respaldo exchanging?

  Dato: has los equipos conectaron a este virtualizado Exchange, luego apagar el mismo e iniciar el equipo Exchange physical, what renombrar el archivo OST hubo para los Outlook pudieran volver a connect.

  Saludos.

  Hola

  También he visto otro "low performance" hilo in Iberia, y siempre lo mismo, to virtualiza muchos procesadores (o mas 2-4) a solo uno, y eso dedicate o no decreased the Máquina una barbaridad.

  Lo del raid, yo siempre UN raid 10 tr aconsejo comment are possible, if no, al menos raid United Nations, 1.

  Te Aa±ado mi en el otro hilo provision:

  
  Re: Maquina recien virtualizada tarda mucho en arrancar
  12. 20-ago-2010 14:33 en respuesta a: akumal2
  Pulsar para ver el perfil de Samquejo Master
  Samquejo
  623 publicaciones desde
  11-dic-2008
  Buenas
  
  A vueltas con los procesadores....
  
  Lo primero, ¿que tasa de carga tiene el procesador inicial?, si la máquina va mal con un Xeon PIII@900, el que se ejecute en un core de un X5500 no va a resolver gran cosa si es por tema de rendimiento (obiamente va mejor, pero no el doble de mejor)
  
  Si la máquina original (pongamos un DGaviion con 2 Xeon PII 300 y 256 de ram con NT Enterprise) tiene 2 procesadores, echando cuentas deberian tener 300+300 y por lo que he leido hasta aqui, un core de cualquier procesador actual debaría valer.
  La realidad es que si esa máquina (me da igual el procesador, el sistema operativo y la ram que tenga) se cambia a menor en alguno de los componentes físicos, lo lógico es que pierda rendimiento, aunque corra en un hp blade 680 G7 (4 hexacores).
  
  En principio y salvo muy raras excepciones yo siempre virtualizo 1 a 1. (en las excepciones entran los procesadores HT y solo respeto los cores en la serie P4-478) con lo que pongamos el primero de los procesadores, Xeon de PIII a 900, que en un 2003 representa 4 cores en 2 pastillas. En este caso le virtualizo a 2 vcpu y pruebo su rendimiento. En los casos en los que son xeon PIV a 2000 por ejemplo (sin HT) en 2 pastillas, se quedaría igual, con 2 vcpu.
  
  Al igual que en un ESX, el tema de las cpu en la VM es delicado porque pueden tener aplicaciones y servicios multihilo a los que el KB de microsoft no les afecta para nada (oracle es un buen ejemplo, cristal reports, GIS, y alguna mas). Y ademas, las herramientas de inventario como puede ser el capcity (de vmware o de m$) o perfmon suelen registrar poco o nada de esto ya que los servicios arrancan incluso antes que el monitorizador o el servicio wim (y no digamos que caiga una consulta en ese momento) por lo que puedes tener en apariencia una máquina física muy sobredimensionada, que al reducirla durante su virtualización caiga por su propio peso.
  
  Y dicho esto, recojo y me voy de vacaciones :)
  Ahi queda.
  
  Si esta u otra respuesta es util, por favor marca su correspondiente notificador.
  
  Gracias/Regards 
  

  If esta u otra respuesta're util, por favor su marca used notificador.

  Gracias / looks

• that opinais of virtualizar el 2003 en vsphere

  Hola y buenos dias, os hago esta pregunta is that in our company we are in ESX 3.5, plena Migración y has the 4, pero eso destrezas, como in todas las empresas surge the duda of ' what can virtualizar.

  "' Soy el Manager del entorno vmware pero no del DA y esta persona me July pegas esta ' of that if neither vmware nor microsoft soportan ' patatine y y paratan.

  Yo siempre he sido, Delcourt notice of that todo are virtualized salvo los recursos that asks sean large tal, what that tengas usar a host o datastore exclusive, en esos casos en UN nor me molesto, there is that if hay so many i/o, uso red, o o memoria o HD cpu, nada pues una Máquina física para el y punto.

  El tema viene cuando tienes a Da in 2,3,4 o mas maquinas, knew uso're infimo, pero as of course necessary son y no debe haber any fallo Replicación or DNS, neither structure nor otras cosas internas del DA:

  Aqui os dejo sus comentarios uno:

  !!!!!

  Haddad HE con soporte empresas back ingenieros y me han confirmed what is me imaginaba y as in su Día waiting a XXXXX, none will be replaced by Recomiendan conversion of DC´s reales por ser sensitive a los cambio HW virtual.

  One of the rape mas comunes in el fallo are the Replicación, fallos in DNS, objetos than desaparecen (TOMBSTON) even the database need local del Activo directory.

  Por mucho than soporte al proceso mediante Virtualizacion VMware knew "convertering" can be a riesgo por eso quiero hear a VMware u XXXXXX: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1006996

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004588 ... VMware does not recommend virtualization of an active DC with converter.

  Fijate what dice aqui http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004588 ... "The best approach for the conversion of a Windows operating system in a virtual machine is hot migrating with VMware Converter installed locally in the operating system. If this is not possible, a hot remote migration is the best choice. Perform a cold migration using the converter boot CD is the final choice as it may require additional drivers. »

  The transport of Microsoft in aspects technical siempre hay than fantasies al dedillo segun our documentation cara publica su remember has the Virtualizacion.  Vereis aqui el documento por excelencia donde lo aclara. OS adelanto, the essentially technical contenido tiene http://support.microsoft.com/kb/888794/en-us

  !!!!!

  Sin mas aqui os dejo the chapa, cordially

  Buenos dias Irasines,

  I think that you can be util este documento: http://www.vmware.com/files/pdf/Virtualizing_Windows_Active_Directory.pdf

  Para poder garantizar a proceso virtualizacion, conveniente conocer los the application clearly what esta virtualizando's sus en entorno virtual strategy. In many cases, a P2V tool facilitated happy labor. In other, are necessary tener siempre present best practices para garantizar el exito y el entorno virtual en operation (Active Directory are an example, Citrix XenApp, SAP u tantos otros tambien).

  I hope you sea of utility.

  Kind regards

  Alejandro.

• Migración of Vmware server 1.0 y 2.0 by ESX 4.0

  Hola, tengo varios servidores con Vmware server 1.0 2.0 y y estoy valorando el pasarlos an ESX 4.0, is that he read Dan mucho mas performance than estas versiones. I have several dudas Development Qué os agradeceria me ayudarais a program of resolution:

  No me importa pay for ESX 4.0 model, but what differences the ESXi gratuita con Hay con respecto the capabilities?

  ¿mediante pueden traspasar las maquinas copiandolas, como he hecho alguna vez office between 2 Vm server 2.0 ESX 4.0 al (o ESXi)?

  También voy a montar nuevos, usually instalo servidores 3 maquinas office, 1 con linux y otras 2 con Win2003-2008 by Terminal Server's Active Directory cada una, what're mejor, montar discos duros rapidos (sas) o poner 2 processors fisicos?

  Gracias.

  Hola,

  El hecho usar el esxi free dificulta a poco (o mucho depende para only) Administration del día a Día del entorno esxi.

  Las and/or mas una obvias tiene el free esxi are that for example any faffa you will have provide una para esxi backup respond. Have usar things scripts of the VMWare para programar una comunidad como forma automated los backups, without is las soportan jumbo frames, the VI API are en modo lectura (eso limited you one that no other realize mediante don't scripts Quarto tasks you en entorno virtual), etc...

  UNA license apetecible a nivel caracteristicas y precio (ahora durante a periodo esta limitado a UN 50% descuento!) the es Essentials. Esta license allows disponer hasta 3 servidores esxi 2 Sockets (CPU) fisicos cada uno a vCenter through centralizados.

  Te paso UN link para veas as caracteristicas las get licenses of VMWare pago.

  Para el proceso virtualizacion you recomendaria usases el vmware converter 4.01 as in the majority of cases facilitated the Migración.

  Respecto has the las CPU pregunta y discos, cuando to virtualiza para reaching a good level of page are important disponer o the processor cores. In principio few mas mejor.

  Pero igual o mas important las CPU are UN acceso a rapido disco (e/s). A menudo suele ser el of botella in los entornos virtualizacion cuello.

  Por tanto siempre are mucho mejor usar discos en vez as sata sas y cuando mejores caracteristicas (lectura/escritura RAM, Cordless, etc.) tenga controladora of discos del virtualizador, better than best.

  Bueno creo as con esto is tienes suficiente partida para hacerte una idea information

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• HP 800ps: SISTEMA 8601 ERROR

  El tracer inicialmente tenia el carro desalineado, y el proceso limpieza y search respond ahora este error appears.

  error 86:01

  carmotor.c, 2403

  in los Zundung del carro (imagen) inicialmente faltaba UN tornillo y me seemed as tenia bastante juego, oscilaba mucho, unarmed y volvi a arma. ahora el error appears that muestra.

  por eso tanmbien could ser puse los ignition dreams, pero al no to which are el lado correcto, o tal vez originalmente estaban al dreams.

  Gracias

  

  

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  Spanish: Foro of HP users
  French: Forum users
  Portuguese: Forum back HP users
  Chinese: 惠普个人客户支持论坛
  Korean: HP 지식커뮤니티

  Thanks for your understanding

  Duane_D

• vCenter Server: error 29102

  Hola a todos, estoy instalando vCenter in una Máquina virtual y me arroja el siguiente error:

  

  Tengo than tener wont vCenter Single Sign-On? If lo instalo no me toca nada of mi Active Directory? Porque vi some options del 'Site name' y UN number del dominio "vsphere.local." Quiero estar seguro that no me haga cambios in the mi dominio instalarlo antes infrastructure config.

  Saludos.

  Hola,

  If you have than instalarlo. In el propio Assistant tienes los clearly previos para cada parte of the instalacion del vCenter. Para instalar el vCenter antes tienes than tener wont como minimo el vCenter Single-Sign-On y el vCenter Inventory Service, sino los tienes obtienes pones el that error. SSO El none go you a touch el Active Directory, "simplemente" lo go a usar para autenticar users of dominio con los Sue al vCenter a traves del vSphere Client Access o del Web client vSphere. Dentro del SSO tienes than configurar UN identity Source aren't otra cosa that indicate UN dominio driver y unas credenciales validas en el Active Directory para that el SSO can see post of users. If esto no esta hecho o no podras works solo connect al vCenter con users local del propio Server vCenter. El dominio vsphere.local're a number FQDN el vCenter usa para sus users local solo y no tiene none Relación con el Active Directory.

  Para una correcta instala el todo instalacion software "of arriba abajo" where por el Single Sign - on is if todo el proceso goes well tendras el vCenter operating system.

  Kind regards

• Error al desinstalar creative cloud

  Desinstalar al creative cloud don't con el uninstall.exe no finishes el proceso y as el programa esta desinstalado pero con errores.

  Hello Alberto,.

  Please try the cleaning tool Adobe CC:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Kind regards

  Sheena

• Error servidor reiniciando

  Buenas tardes,

  Hace a momento I made par UN actuaciones in a Windows Server 2003, concretamente an antivirus cambio y UN cambio del archivo paginacion one otro disco duro, y me pidio reiniciar. As lo reincie ASI of forma manual, pero cuando brought arrancar no lo hace, is is still in the pantalla inicio vmware as editor.

  There s several the tests determining what esta pasando para, y creo are el fichero vmdk what corrompido, ya ha than utilizando el vmotion if that pude change el servidor virtual host, pero no local data store, there is that al migrar intentarlo me da el siguiente error:

  "Name: move the virtual machine.

  "Status: Error caused by HGEMC1\HGEMC1_1.vmdk [VNXDS02] file.

  Yo forzar para that the bios arrancara, pero no llega a complete este proceso departure.

  También Yo realize her copia del fichero, making United Nations manual browse datastore download a mi equipo local pero tambien me da error: "expected put the message.» "Eu: ERROR".

  There mirado en el Journal, y no he visto nada significant (lo transcontine También).

  The structure led directory datastore the editor in the image, no hay segunda del archivos par UN "International" swap como, pero no se TR are normal.

  Y tambien say that the MV back discos duros, vmdk given antes el uno tiene, y otro RAW.

  

  If someone can help me lo agradeceria, a worm if hay forma reparar el servidor.

  Gracias y saludos.

  Hola Paulitus,

  Los datos UN disco RDM don't be pierden, ago that el hypervisor solo hace a enlace an el y esa LUN no datos lo formatea en VMFS or where.

  If you want ampliar el RDM than dirigirte one have you SAN y redimensionar esa LUN. Cuando hayas redimensionado vuelves a RDM connect el y luego con the tool of Dell Diskpart hacer UN is extend Québec in 2003 no esta incluido.

  A greeting.

  P.D. Como mid-week crearia a nuevo del VMDK paginacion that whole tamano y no el usaria RDM.

• Error con VMware Converter para pasar MV an otra vidéoconférence

  Buenas tardes,

  Este momento estoy realizando el paso una Máquina virtual pc una mi vidéoconférence, the cuestion are me sale el siguiente error, not be that pasa... por favor me can help!

  "Unable to get hardware information for the selected computer.

  Gracias

  Caroline,

  If lo're queres hacer bajar the virtual machine than corriendo en esta UN ESXi a Máquina you no hace falta than corras converter of the United Nations.

  Tenes that hacer lo siguiente:

  1. Apagas the virtual machine
  2. Going to a config y despues del ESXi storage
  3. Rabino el datastore donde esta you virtual machine, boton derecho--> browse datastor
  4. Directory donde esta the Máquina el Rabino y virtual das al boton descarga

  Best wishes / Saludos

  Por don't favor no olvides calificar las responses you valiosos ayuda o were should

  Please, do not forget the points of call of the "useful" or "correct" answers

  ________________________________________
  Nicolas Solop

  VMware vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  My Business Blog (Blog of the Wetcom group)

  Follow me on Twitter

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  

• Error clonando con vmware converter una maquina virtual en entorno esxi

  No can not copy con MVWARE CONVERTER una Máquina virtual an ESXi environment. The current situation are the following:

  -ESXi-01 Servidor con discos local con una Máquina virtual con Exchange:
  125 GB virtual disco (Disco C: 25 GB - Disco D: 100 GB).

  -REPLICA ESXi-02 Servidor con discos local con una replica (VMWARE CONVERTER) of the Máquina virtual Exchange than realizó habitualmente sin problemas.

  -El disco D of the MV of change to esta quedando sin espacio. Debo nao enlarge. VOY was the MV y creo UN segundo virtual Disco of 30 GB. Entro en el to the MV y en el administrator of clubs, realizó lo siguiente. Convierto en el disco-0 dinamico (discos logicos C y D) y los 30 GB al disco D. TODO OK momento agrego.

  -Name necessary ampliar mas los discos C y D para el futuro y realizó lo siguiente:
  1 rows with the CONVERTER of VMWARE ESXi of MV - 01 a ESXi-02 en destino generating virtual disco solo este paso UN 250 GB (Disco C: 50 GB - Disco D: 200 GB). Arranco the MV y veo that works correctamente.
  2 Desmonto el RAID Server ESXi-01 y return a montarlo al maximo el espacio ampliando. Instalo nuevo el entorno ESXi.
  3 return has con clonar the VMWARE CONVERTER MV en este caso ESX - 02 one ESX-01. Arranco MV difinitivamente ESX-01 are the Máquina en production. TODO OK.

  El problema are real in Quebec are not can not volver has the ESX - 01 one ESX-02 MV clonar. Me da los errores segun following training to realize the injerto:

  COPIANDO VIRTUAL DISCO:
  (OK) Task: Convert virtual machine
  (OK) Created the virtual machine "Exchange".
  (OK) Starting block at the level of cloning for volume "C:".
  Error: Failed to clone the drive 0 on the VM "Exchange".

  (Al 0% error)

  COPIANDO DISCOS C y d:
  (OK) Task: Convert virtual machine
  (OK) Created the virtual machine "Exchange".
  (OK) Starting at the level of files cloning for volume "C:".
  Error: Failed to clone the volume "C:".
  (Al 8% error)

  Comentar than aunque teoricamente el tamano del archivo en mi entorno esxi esta limitado a 256GB, el fichero generated in origen (ESXi-01) y tambien en destino (ESXi-02) are 262 GB. ESO if, yo it solo asignado al virtual disco 250 GB.

  Hola Antonio como estas?

  No en you estoy following del todo lo estas intentando realize vamos por partes:

  • The virtual disk solo Máquina-virtual tiene a con 2 particiones. Esto are asi?
  • If the esta Máquina virtual configurada como is indica in el punto anterior lo ordered hacer're durante el proceso of conversion are seleccionar the option to create a virtual disco para cada n y esta forma evitarias el exceso en el datastore tamano
  • Otra opcion en TR of're volver a clonar Máquina sin x the size of los discos pero doing that each n is convierta en un nuevo disco y este momento el unico disco esta generating problems are el D, una las options are directly ampliar el tamano del disco (siempre y cuando los don't discos sean different y no UN disco unico particiones) y luego con diskpart mover n hasta el final del disco
  • No entiendo porque estas serve there such do disco pero TR los desmontando're por a formateo tema y cambio tamano of blocks con los puntos lo podes avoid arriba las options

  Saludos,

  Nicolas

• Error al configurar VMware HA

  Amigos muy buenas tardes

  Quiero consultarles el error me presenta al crear try a Québec tenga property of HA cluster. I am in a prueba ambiente con vshere (60dias)

  El error sell me in los back ESXi are: esxi1.miempresa.com host currently has no management network redundancy

  Al parecer is alguna red redundancia config Québec is no e s, no e visto Québec is tenga than perform in any config ese tipo HA adicional. But if so agradeceria bastante el apoyo. u orientarme an alguna respond.

  That tal vmcris,

  Esta alerted to muestra con the finalidad recordarte Québec no tienes natachasery (red physical cards) redundantes para el virtual switch donde reside you service o red management console:

  Here we can see a virtual switch con redundancia (2 red cards)

  

  In case that sea una prueba o no solo sea UN lab o no tengamos suficientes tarjetas para tener redundancia podemos avoid what our esta muestre alerted leaves el siguiente Parâmetro HA advanced:

  das.ignoreRedundantNetWarning

  Configuras going to of the cluster of el y a tener an options advanced, ingresas dicha option button y knew valor must be 'true '.

  Saludos.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• In error FT

  Hola

  He estado running normal con con una las maquians than I have in FT.

  He performed the tests of HA unas forzandos caida servidores y, esto despues no could volver a hacer funcionar FT.

  El HA esta ahora ok running.

  El error me da FT are el bones editor.

  He mirado por el error me da, to comenta por ahi than tiene than worm con algo MMU, os editor tambien pantallazo config in esa mv.

  A worm if an alguien ha pasado.

  Gracias

  are some processors to enable FT sub-granting estar f las vms, you recommend that take vm's skills este KB upon that processors tienen esa limitacion FT:

  http://KB.VMware.com/kb/1008027

  Saludos.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• P2V defective after installation of the Converter Agent, unknown error produced to the customer

  Hello! I need help with that on:

  vSphere Client 4.0.0 build 208111

  vCenter Server 4.0.0 build 208111

  Host ESX 4.0.0 build 261974

  Company agent Converter 4.1.1 build 20617

  Source of Windows Server 2003 SP1 x 86-HP ProLiant ML370 std

  Trying to P2V using "Import Machine" vcenter. After that the converter Agent is installed, the Import Wizard displays an error: unknown error produced to the customer. After you click OK. The VI client ends.

  The source servers and ESX host are on a place other than the vCenter, but on the 'same' network. Other P2V in the same place are passed without problem.

  VMware converter - client.log:

  Journal for VMware Converter Enterprise Client, pid = 4408, version = version 4.1.1 = build-206170, option = release, section = 2

  Current working directory: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\Plugins\Converter Enterprise 4.1.1

  HOSTINFO: See Intel CPU, numCoresPerCPU 2, numThreadsPerCore 1.

  HOSTINFO: This machine has 1 physical CPU, 2 total hearts and 2 logical processors.

  Recorder P2V created

  Initialize SSL

  Using the libcrypto, version 9070CF

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  Created SSL context

  AppInit finished

  Start of the execution of a task

  By ensuring that this interface UFAD version vmware converter - 4.1.1

  SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. 172.25.17.19

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • Used to connect host name does not match name the object on the certificate of the host

  • A certificate of the host string comes from an untrusted root.

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  UFAD interface version is vmware-converter - 4.1.1

  Execution completed the task

  Start of the execution of a task

  SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. osl1019

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • Used to connect host name does not match name the object on the certificate of the host

  • A certificate of the host string comes from an untrusted root.

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  Connecting to host osl1019 on port 443 using the https protocol

  SSLVerifyCertAgainstSystemStore: Incompatibility of topic: VMware vs. osl1019

  SSLVerifyCertAgainstSystemStore: The certificate of the remote host has these problems:

  • Used to connect host name does not match name the object on the certificate of the host

  • A certificate of the host string comes from an untrusted root.

  SSLVerifyCertAgainstSystemStore: Verification of the certificate is disabled, so connection will continue despite the error

  Execution completed the task

  Start of the execution of a task

  Connection to IPC$ on 172.20.2.10 as domain\user1

  Manager of SMB: host has already had a different share mapped with conflicting credentials.  Could not map share http://\\172.20.2.10\IPC$.

  Task failed: P2VError REMOTE_UFA_CREDENTIAL_CONFLICT_ERROR (172.20.2.10)

  Start of the execution of a task

  Connection to IPC$ on 172.20.2.10 as domain\user1

  Successfully connected to IPC$ on 172.20.2.10

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Unable to connect to
  172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

  From vmware-converter on 172.20.2.10

  Could not open service handle to with 983103:1060 level access

  Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

  Failed to start the vmware converter service

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Unable to connect to
  172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

  From vmware-converter on 172.20.2.10

  Could not open service handle to with 983103:1060 level access

  Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

  Failed to start the vmware converter service

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Unable to connect to
  172.20.2.10\pipe\vmware-converter-VMDB. Reason: The system cannot find the specified file. . Error code: 2.

  From vmware-converter on 172.20.2.10

  Could not open service handle to with 983103:1060 level access

  Failed to start VMware Converter Agent service on 172.20.2.10. Reason: Service control manager error.

  Failed to start the vmware converter service

  Give up trying to connect to
  172.20.2.10\pipe\vmware-converter-VMDB

  Task failed: P2VError UFA_NOT_RUNNING()

  Installation UFAD hostname = 172.20.2.10, user name is domain\user, postponeReboot = 1

  Start of the execution of a task

  Connect to ADMIN$ on 172.20.2.10 as domain\user1

  Successfully connected to ADMIN$ on 172.20.2.10

  MakeSafeDirectory: directory exists, skip the security lock

  MakeSafeDirectory: directory exists, skip the security lock

  MakeSafeDirectory: directory exists, skip the security lock

  ہ service args: com.vmware.courier - vntixenubmcaveth

  Could not open service handle to with 983551:1060 level access

  Execution completed the task

  Start of the execution of a task

  Connection to IPC$ on 172.20.2.10 as domain\user1

  Successfully connected to IPC$ on 172.20.2.10

  Connection to
  172.20.2.10\pipe\vmware-converter-VMDB, use the SSL protocol: true

  Connected to the
  172.20.2.10\pipe\vmware-converter-VMDB

  Unknown path: /vmomi/

  Impossible task without error message

  VMware converter - agent.log:

  Journal for the VMware Converter Enterprise, pid = 1396, Agent version = 4.1.1 build = build-206170, option = release, section = 2

  Cannot create the writer console

  Current working directory: C:\Program VMware Converter Enterprise Agent

  HOSTINFO: See Intel CPU, numCoresPerCPU 1, numThreadsPerCore 1.

  HOSTINFO: This machine has 1 UC physical and carrots 1 1 logical processors total.

  TaskMax = 40, IoMin = 1, IoMax = 81

  Try ufa_agent

  Plugin path 0: ufa - agent.dll

  Absolute path of the plugin 0: C:\Program VMware Converter Enterprise Agent\ufa - agent.dll

  Initializing the SSL context

  Using the libcrypto, version 9070CF

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  Plugin initialized

  Try ufa_client

  Plugin path 1: ufa - client.dll

  Absolute path of the plugin 1: C:\Program VMware Converter Enterprise Agent\ufa - client.dll

  UfaClientPlugin Init

  Try ufa_slave

  Plugin path 2: ufa - slave.dll

  Absolute path of the plugin 2: C:\Program VMware Converter Enterprise Agent\ufa - slave.dll

  Microsoft Windows Server 2003,

  Standard Edition

  Service Pack 1 (Build 3790)

  UfaSlavePlugin Init

  Try ufa_sysMigration

  Plugin 3 path: ufa - sysmigration.dll

  Absolute path of the plugin 3: C:\Program VMware Converter Enterprise Agent\ufa - sysmigration.dll

  NFC connection accept timeout: 180000 milliseconds

  NFC request timeout: 180000 milliseconds

  NFC read timeout: 60000 milliseconds

  NFC write timeout: 600 000 milliseconds

  NFC connection accept timeout: 180000 milliseconds

  NFC request timeout: 180000 milliseconds

  NFC read timeout: 60000 milliseconds

  NFC write timeout: 600 000 milliseconds

  SysMigrationPlugin Init

  Try ufa_sysReconfig

  Plugin path 4: ufa - sysreconfig.dll

  Absolute path of the plugin 4: C:\Program VMware Converter Enterprise Agent\ufa - sysreconfig.dll

  SysReconfigPlugin Init

  The data store of reconfiguration of loading XML from C:\Program VMware Converter Enterprise Agent\reconfigurationDataStore.dat...

  ReconfigurationDataStore of filling...

  Action free of charge

  CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_1000 & dev_0030 patch: C_SYMMPI

  CurrentControlSetKey update of the register: Services\symmpi patch: S_SYMMPI

  Update the filePathInWinDir file: system32\drivers\symmpi.sys source: BASEOS sourceFileName: symmpi.sys

  Action BuslogicMylex of loading

  CurrentControlSetKey update of the register: enum\root\LEGACY_BUSLOGIC patch: L_BUSLOGIC

  CurrentControlSetKey update of the register: services\buslogic patch: S_BUSLOGIC

  Update the filePathInWinDir file: system32\drivers\buslogic.sys source: VMWARE_DRIVERS_CAB sourceFileName: buslogic_for_nt.sys

  Action Buslogic_vmscsi of loading

  CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_104b & dev_1040 patch: C_VMSCSI

  CurrentControlSetKey update of the register: Control\Class\ {4D36E97B-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_VMSCSI

  CurrentControlSetKey update of the register: Services\vmscsi patch: S_VMSCSI

  Update the filePathInWinDir file: system32\drivers\vmscsi.sys source: VMWARE_DRIVERS_CAB sourceFileName: vmscsi.sys

  Action Buslogic_vmscsi_ACPI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_104B & DEV_1040 & SUBSYS_1040104B & REV_01\3 & 61aaa01 & 0 & 80 patch: E_VMSCSI

  Action Buslogic_vmscsi_NotACPI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_104B & DEV_1040 & SUBSYS_1040104B & REV_01\2 & ebb567f & 0 & 80 patch: E_VMSCSI

  Action Enable_Lsi_Scsi_Driver of loading

  CurrentControlSetKey update of the register: Services\LSI_SCSI patch: S_LSI_SCSI

  Action Mouse_Keyboard_Common of loading

  Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0303 patch: C_PS2KBD

  CurrentControlSetKey update of the register: Control\Class\ {4D36E96B-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_PS2KBD

  Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0f13 patch: C_PS2MOUSE

  Update the registry currentControlSetKey: Control\CriticalDeviceDatabase\ * pnp0f03 patch: C_PS2MOUSE

  CurrentControlSetKey update of the register: Control\Class\ {4D36E96F-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_PS2MOUSE

  Action Mouse_Keyboard_ISAPnP of loading

  CurrentControlSetKey update the registry: Control\CriticalDeviceDatabase\pci #ven_8086 & dev_7110 & cc_0601 patch: C_ISAPNP

  Action Mouse_Keyboard_ACPI of loading

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0303 patch: E_PS2KBD

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F13 patch: E_PS2MOUSE

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F03 patch: E_PS2MOUSE

  Action Mouse_Keyboard_ACPI_Vista of loading

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F13 patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\ACPI\PNP0F03 patch: SKUNKWORKS_FILLER

  Action Mouse_Keyboard_NotACPI of loading

  Update the registry currentControlSetKey: Enum\Root\ * PNP0F13 patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: Enum\Root\ * PNP0F03 patch: SKUNKWORKS_FILLER

  Action NT_SVGA_Registry_Updates of loading

  CurrentControlSetKey update of the register: enum\root\LEGACY_VMX_SVGA patch: E_VMX_SVGA

  CurrentControlSetKey update of the register: services\vmx_svga patch: S_VMX_SVGA

  Action Common_SVGA_Updates of loading

  CurrentControlSetKey update of the register: services\vmx_svga patch: S_VMX_SVGA

  CurrentControlSetKey update of the register: Control\Class\ {4D36E968-E325-11CE-BFC1-08002BE10318} \0009 patch: CL_VMX_SVGA

  Update the filePathInWinDir file: INF\vmx_svga.inf source: VMWARE_DRIVERS_CAB sourceFileName: vmx_svga.inf

  Update the filePathInWinDir file: system32\vmx_fb.dll source: VMWARE_DRIVERS_CAB sourceFileName: vmx_fb.dll

  Update the filePathInWinDir file: system32\vmx_mode.dll source: VMWARE_DRIVERS_CAB sourceFileName: vmx_mode.dll

  Update the filePathInWinDir file: system32\drivers\vmx_svga.sys source: VMWARE_DRIVERS_CAB sourceFileName: vmx_svga.sys

  Action SVGA_Registry_Updates_APCI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00\3 & 61aaa01 & 0 & 78 patch: E_VMX_SVGA

  Action SVGA_Registry_Updates_NotACPI of loading

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_15AD & DEV_0405 & SUBSYS_040515AD & REV_00\2 & ebb567f & 0 & 78 patch: E_VMX_SVGA

  Action Restore_i8042_NT5 of loading

  CurrentControlSetKey update of the register: Services\i8042prt patch: SKUNKWORKS_S_I8042

  Update the filePathInWinDir file: system32\drivers\i8042prt.sys source: BASEOS sourceFileName: i8042prt.sys

  Action Deref_vpcsrvc of loading

  CurrentControlSetKey update of the register: Services\1-driver-vpcsrvc patch: SKUNKWORKS_FILLER

  Update the registry CurrentControlSetKey: Services\1-vpcsrvc patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: Enum\LEGACY_1-DRIVER-VPCSRVC patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: patch Enum\LEGACY_1-VPCSRVC: SKUNKWORKS_FILLER

  Action Deref_mrxvpc of loading

  CurrentControlSetKey update of the register: Services\MrxVPC patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_MRXVPC patch: SKUNKWORKS_FILLER

  Action Deref_vpcmap of loading

  CurrentControlSetKey update of the register: Services\VPCMap patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_VPCMAP patch: SKUNKWORKS_FILLER

  Deref_vpc-s3_NT4 of loading action

  CurrentControlSetKey update of the register: Services\vpc-s3 patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_VPC-S3 patch: SKUNKWORKS_FILLER

  Deref_vpc-s3_NT5 of loading action

  CurrentControlSetKey update of the register: Services\vpc-s3 patch: SKUNKWORKS_FILLER

  Update the registry CurrentControlSetKey: Enum\PCI\VEN_5333 & DEV_8811 & SUBSYS_00000000 & REV_00\3 & 267a616a & 0 & 40 patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\s3legacy patch: SKUNKWORKS_FILLER

  Action Deref_vmsrvc of loading

  CurrentControlSetKey update of the register: Services\1-driver-vmsrvc patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: Enum\Root\LEGACY_1-DRIVER-VMSRVC patch: SKUNKWORKS_FILLER

  Update the registry CurrentControlSetKey: Services\1-vmsrvc patch: SKUNKWORKS_FILLER

  Update the registry currentControlSetKey: patch Enum\Root\LEGACY_1-VMSRVC: SKUNKWORKS_FILLER

  Action Deref_netfin of loading

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_NETFIN patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\NetFin patch: SKUNKWORKS_FILLER

  Action Deref_cpqdmi of loading

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_CPQDMI patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\CPQDMI patch: SKUNKWORKS_FILLER

  Action Deref_cpqalert of loading

  CurrentControlSetKey update of the register: Enum\Root\LEGACY_CPQALERT patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\CPQALERT patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\EventLog\System\CPQALERT patch: SKUNKWORKS_FILLER

  Action Deref_cpqagent of loading

  CurrentControlSetKey update of the register: Services\EventLog\System\Snmp patch: SKUNKWORKS_FILLER

  CurrentControlSetKey update of the register: Services\Snmp patch: SKUNKWORKS_FILLER

  Action Deref_ipmi of loading

  CurrentControlSetKey update of the register: Services\IPMI patch: SKUNKWORKS_FILLER

  Action RemoveUnwantedKeys of loading

  CurrentControlSetKey update of the register: Services\VPCMap patch: SKUNKWORKS_FILLER

  Action FixSetupLog of loading

  String replace updated filePathInWinDir: repair\setup.log model:
  System32
  value of ntoskrnl.exe.*\.exe:
  System32
  Ntoskrnl.exe = "ntoskrnl.exe".

  String replace updated filePathInWinDir: repair\setup.log model:
  System32
  value of Hal.dll.*\.dll:
  System32
  HAL.dll = "hal.dll".

  Action DeleteInfCacheFile of loading

  FilePathInWinDir delete the file: inf\INFCACHE.1

  Definition of loading GenericWin2k364Bit

  Definition of loading GenericVista64Bit

  Definition of loading GenericWinXP64Bit

  Definition of loading GenericWin64Bit

  Definition of loading NotWin64Bit

  Definition of loading GenericVista

  Definition of loading GenericWinNT5

  Definition of loading GenericWin2k3

  Definition of loading GenericWinXP

  Definition of loading GenericWin2k

  Definition of loading GenericWinNT4

  Definition of loading NotWinNT4

  Definition of loading NotWinVista

  Loading ACPI expression definition

  Definition of loading NotACPI

  Loading definition expression MultiProc

  Definition of loading InstallSVGA

  Definition of loading MustUpdateCoreNTFiles

  Definition of loading BuslogicMylex

  Definition of loading Buslogic_vmscsi

  Loading reconfiguration FixSetupLog

  Action FixSetupLog for reconfiguration of loading

  Loading reconfiguration BuslogicMylex

  Action BuslogicMylex for reconfiguration of loading

  Loading free reconfiguration

  Reconfiguration of loading free action

  Loading reconfiguration Buslogic_vmscsi_ACPI

  Action Buslogic_vmscsi for reconfiguration of loading

  Action Buslogic_vmscsi_ACPI for reconfiguration of loading

  Loading reconfiguration Buslogic_vmscsi_NotACPI

  Action Buslogic_vmscsi for reconfiguration of loading

  Action Buslogic_vmscsi_NotACPI for reconfiguration of loading

  Loading reconfiguration Enable_Lsi_Scsi_Driver

  Action Enable_Lsi_Scsi_Driver for reconfiguration of loading

  Loading reconfiguration Mouse_Keyboard_ACPI

  Action Mouse_Keyboard_Common for reconfiguration of loading

  Action Mouse_Keyboard_ISAPnP for reconfiguration of loading

  Action Mouse_Keyboard_ACPI for reconfiguration of loading

  Loading reconfiguration Mouse_Keyboard_NotACPI

  Action Mouse_Keyboard_Common for reconfiguration of loading

  Action Mouse_Keyboard_ISAPnP for reconfiguration of loading

  Action Mouse_Keyboard_NotACPI for reconfiguration of loading

  Loading reconfiguration Mouse_Keyboard_ACPI_Vista

  Action Mouse_Keyboard_Common for reconfiguration of loading

  Action Mouse_Keyboard_ACPI_Vista for reconfiguration of loading

  Loading reconfiguration SVGA_NT

  Action Common_SVGA_Updates for reconfiguration of loading

  Action NT_SVGA_Registry_Updates for reconfiguration of loading

  Loading reconfiguration SVGA_notNT_ACPI

  Action Common_SVGA_Updates for reconfiguration of loading

  Action SVGA_Registry_Updates_APCI for reconfiguration of loading

  Loading reconfiguration SVGA_notNT_NotACPI

  Action Common_SVGA_Updates for reconfiguration of loading

  Action SVGA_Registry_Updates_NotACPI for reconfiguration of loading

  Loading reconfiguration Restore_i8042_NT5

  Action Restore_i8042_NT5 for reconfiguration of loading

  Loading reconfiguration Deref_vpcsrvc

  Action Deref_vpcsrvc for reconfiguration of loading

  Loading reconfiguration Deref_mrxvpc

  Action Deref_mrxvpc for reconfiguration of loading

  Loading reconfiguration Deref_vpcmap

  Action Deref_vpcmap for reconfiguration of loading

  Loading reconfiguration Deref_vpc-s3_NT4

  Deref_vpc-s3_NT4 for reconfiguration of loading action

  Loading reconfiguration Deref_vpc-s3_NT5

  Deref_vpc-s3_NT5 for reconfiguration of loading action

  Loading reconfiguration Deref_vmsrvc

  Action Deref_vmsrvc for reconfiguration of loading

  Loading reconfiguration Deref_netfin

  Action Deref_netfin for reconfiguration of loading

  Loading reconfiguration Deref_cpqdmi

  Action Deref_cpqdmi for reconfiguration of loading

  Loading reconfiguration Deref_cpqalert

  Action Deref_cpqalert for reconfiguration of loading

  Loading reconfiguration Deref_cpqagent

  Action Deref_cpqagent for reconfiguration of loading

  Loading reconfiguration Deref_ipmi

  Action Deref_ipmi for reconfiguration of loading

  Loading reconfiguration RemoveUnwantedKeys

  Action RemoveUnwantedKeys for reconfiguration of loading

  Loading reconfiguration Delete_InfCacheFile

  Action DeleteInfCacheFile for reconfiguration of loading

  Load patches for WINDOWS4.0

  Load patches for WINDOWS4.0

  Load patches for WINDOWS4.0

  Load patches for WINDOWS4.0

  Try ufa_vmImporter

  Plugin path 5: ufa - vmimporter.dll

  Absolute path of the plugin 5: C:\Program VMware Converter Enterprise Agent\ufa - vmimporter.dll

  VMImporterPlugin Init

  VMDB channel name:
  .\pipe\vmware-converter-VMDB, use the SSL protocol: true

  New format for serialization of VMDB VMOMI

  Plugin has started

  UfaClientPlugin Start

  UfaSlavePlugin Start

  SysMigrationPlugin Start

  SysReconfigPlugin Start

  VMImporterPlugin Start

  vmware converter service started

  IVmdbPipe2Impl operation completed with error: the pipe is closed.

  Thanks in advance for any help provided!

  Cannot find anything on your error. It is sometimes better to install standalone converter locally on the server that you are trying to convert. Then run the converter locally on your virtual infrastructure.

  Best wishes / Saludos

  Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.

  Please, do not forget the points of call of the "useful" or "correct" answers

  ________________________________________

  Nicolas Solop

  VMware vExpert 2010 - VCP 410 - VCP 310 - VAC - VTSP

  My Linkedin profile

  Join the Virtualizacion en Español group in LinkedIn

  ! http://feeds.feedburner.com/WetcomGroup.1.gif!

• Double error databases

  Hello
  
  I just created two databases 11.2.0.1 on windows 7 64 bit on my laptop, called the PRODUCTION and TEST, and I want to duplicate PRODUCTION on TEST.
  
  I only created two and take a full backup of PRODUCTION (' rman > backup database include current controlfile more archivelog '), nothing more.
  
  I connect with rman to TEST:
  
  $ rman target sys/oracle@PRODUCTION auxiliary.
  
  RMAN > target database duplicate to nofilenamecheck 'TEST '.
  
  Then, I get this error:
  
  the recuperaci¾n del medio Fysico iniciando

  fallo de la recuperaci¾n del medio fÝsico
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: fallo del comando Duplicate Db en 08/06/2012 08:45:06
  RMAN-03015: se ha producido un error en el script Memory Script almacenado
  ORA-00283: recovery session canceled due to errors
  RMAN-11003: fallo al analizar/ejecutar la sentencia SQL: alter database recover
  if needed
   start until change 994197 using backup controlfile
  ORA-00283: recovery session canceled due to errors
  ORA-01110: data file 1: 'C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\SYSTEM01.D
  BF'
  ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
  ORA-01110: data file 1: 'C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\SYSTEM01.D
  BF'

  my file system data is correct in the PRODUCTION database:
  
  STATUS
  -------
  NAME
  -------------------------------------------------------------
  SYSTEM
  C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\SYSTEM01. DBF
  ONLINE
  C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\SYSAUX01. DBF
  ONLINE
  C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\UNDOTBS01. DBF
  ONLINE
  C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\USERS01. DBF
  ONLINE
  C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\EXAMPLE01. DBF
  
  to alert.log on TEST I see some mistakes on all the data files:

  Errors in file c:\users\my_user\mibbdd\diag\rdbms\test\test\trace\test_dbw0_1332.trc:
  ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
  ORA-01110: data file 1: 'C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\SYSTEM01.DBF'
  ORA-27086: unable to lock file - already in use
  OSD-00002: información adicional sobre errores

  the DBWr trace file I see the same error on all data files:

  O/S-Error: (OS 32) El proceso no tiene acceso al archivo porque está siendo utilizado por otro proceso.
  skgfglk: C:_USERS_my_user_MIBBDD_ORADATA_PRODUCTION_UNDOTBS01.DBF possible holder 6716:5580, flags 1DDE: Problem Key 'ORA 1110' was flood controlled (0x1) (no incident)
  ORA-01110: data file 3: 'C:\USERS\my_user\MIBBDD\ORADATA\PRODUCTION\UNDOTBS01.DBF'
  ORA-27086: unable to lock file - already in use
  OSD-00002: información adicional sobre errores

  I do not use the PRODUCTION database for nothing, it to only open, no DDL, no DML, nothing...
  
  What is the problem and how to solve?
  
  Thank you

  Hello

  When duplicating a database without giving further details on the same computer, rman will try to replicate files on the same! folder structure.
  Thus (and because you specify nofilenamecheck) that he tries to overwrite your files of production (which he can not do, given that your DB is open).
  I'd be happy of the error... otherwise you would have destroyed (knowingle, due to the nofilenamecheck use) your production DB.

  For the restore, you should RMAN for Exchange storage for your database files. Use the "set newname for datafile/tablespace/database" to a new location.

  Concerning
  Sebastian

• Recovery plan test failed - a file is not found error

  Hi all

  Finally, I got my SRM environment installed a few days ago and made a small test with 2 VMS successfully recovery plan. Today, we run a new trial with 18 virtual machines of low priority and everything went smoothly until after 15 minutes, the process failed with the error "file not found" turn on/off the virtual machines on the remote site.

  Basically, we have 1 EMC Clariion each site with mirrorview which have been configured after EMC VMware Site Recovery Manager with EMC CLARiiON CX3 and MirrorViewS implementation and MRS. 1.0 Guide. We have detected that the snashot created recovery Clarrion is placed to the right of the active state after the beginning of the trial, but after 15 minutes later he returned to Inactive.

  Other research showed me that the error that gives me the recovery plan test is correct given that the snapshot is no longer active and all files in the virtual machines (VMX and VMDK) that the SRM tries to light are on the snapshot.

  Any of you have seen something like that?

  

  Thanks in advance.

  Saludos/looks

  Nicolas Solop

  Buenos Aires, Argentina

  -

  ---

  Mi empresa

  En mi perfil LinkedIn

  Grupo de Virtualizacion en Español of Linkedin

  -

  ---

  Hello

  Our best practices for configuring CLARiiON SnapView, which copies itself on the first point of entry in the catch instant times the volume of production is to distribute between 20-30% of the production LUN for the RLP LUNS box

  Regarding your volume of 300 GB of LUN LUN Pool reserved (and you might need more than one - that is to say if you have a consistent snapshot that includes multiple LUNS it will add ot the space required)-you should provide at least a 30 GB, otherwise a 60 GB LUNS in your region Reserved LUN Pool

  I would try to increase the RLP LUNS for this kind of size and try again

  Concerning

  Alex Tanner