HP 800ps: SISTEMA 8601 ERROR

Similar Questions

• G62: Hi David

  Hi David, can you help me with a problem. My laptop does not start the administrator password fails and is disabling sistem with error code 55318068... THX, I hope that respond you!

  @Deppjhonny

  Enter: 40070068

  Kind regards

  DP - K

• Task Scheduler service fails, so I am unable to defragment my hard drive.

  original title: Task Scheduler service does not start

  OK, I have some stability issues with my new win 7 OS and I want to remedy. to do this, I would like to solve any potential problems which can cause my system crashes.

  I check the logs and noticed that the Task Scheduler service is not running. for newspapers of sistem registry errors and i cannot defragment my hard drive.

  So how do you start the Task Scheduler service? When I press the Start button service, I get an error. This is a perforated Cap.

  http://I27.Tinypic.com/2rp4mm8.PNG

  Try to do a repair installation;
  1. Insert the DVD of Windows 7
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on "repair your computer".
  6. Select the operating system you want to repair.
  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  I don't have the possibility to repair the operating system or select one as you suggested in step 6. I have and here is a picture of the dialog box http://www.sevenforums.com/attachments/tutorials/1010d1227511616-startup-repair-repair.jpg

  EDIT: Here is the solution I found: http://social.technet.microsoft.com/Forums/en-US/itprovistasp/thread/0c438376-1486-4ae4-9847-2de7a8767f27

• El of Al connect moden en pantalla appears breach al sistema al pulsar aceptar appears error address000002EC

  El Al connect not moden en pantalla appears breach al sistema al pulsar aceptar appears error address000002EC y otras veces some're error address006A87BA if no 004A 2358.

  M question: there are como el para moden vuelva a trabajar en pc again is only antes lo hacía el.

  Hi jesus,.

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Thank you

• El sistema me indica error 5008

  Como corregir 'Error 5008'

  Hi Ender, (OT: have your reading the great books of Orson Scott Card on the heroic and brilliant Ender?)

  Your question seems to imply error 5008.   With only that it is difficult to correctly direct you since he has good ways that 5008 error can occur and many products or programs to which it may apply.

  Speaking only English here.  If the error relates to Microsoft Security Essentials (I don't never heard forward), there is a Spanish version of this forum: http://answers.microsoft.com/es-es/protect/forum?tab=all.

  If it's anything else (you can't link the error to do something with MSE) or you do not have MSE, there is a Forum answers for system repair Windows and restore in Spanish at: http://answers.microsoft.com/en-us/windows/forum/windows_other-system?page=1&tab=all&tm=1300700638376 where you can get expert services in your language.  Upward, remember next to the Version of Windows, you use the drop-down menu to select your version of Windows to join the forum appropriate for your system.

  Good luck and best wishes.

  *********************************************************

  Hola Ender (OT: tiene su lectura los libros of Orson Scott Card excelentes sober the heroica is brilliant Ender?)
  El problema parece implicar error 5008. Con solo are difficult dirigir correctamente usted is that hay muchas maneras that error 5008 can ocurrir y muchos productos o programas a los than you can apply.
  Hablamos solo an Inglês aqui. If the error is refiere has Microsoft Security Essentials (nunca he heard eso antes), una version en Español in este foro: http://answers.microsoft.com/es-es/protect/forum?tab=all.
  If to otra is cosa (no is can empatar el hacer algo that MSE error) o no tiene MSE, no hay a creative foro para Windows sistema Reparación y recuperacion en Español: http://answers.microsoft.com/en-us/windows/forum/windows_other-system?page=1&tab=all&tm=1300700638376 donde is you can get help from experts in su lenguaje. Cerca of cima, no album of junto a version of Windows, use el menu desplegable para seleccionar Windows version para el foro para su sistema right.
  Buena suerte y mejores deseos.

• Help. AYUDA! Error interno 0 x 80042302 no puedo realize copia of sistema tampoco restore sistema. I can't restore the system, or make a copy.

  Error interno 0 x 80042302 THE APPLICATION OF COPIED DE SEGURIDAD No. SE you CAN REALIZE POR ONE ERROR INTERNO 0 x 80042302

  No puedo realize copia of sistema tampoco restore sistema Hace pocos dias is ejecuto automatically UN update there is revirtio solo desde entonces tengo este problema, than hago?. No are you can open propiedades del sistema me sale el cartel del error. I can't restore the system, or make a copy. Since a few days ago was the installation automatlicly one updated, then it reversed itself changes. I can't open system properties either.

  SONY VAIO VPCEA35FL

  NO STARTS WINDOWS DEFENDER AS EL SERVICIO DEL PROGRAMA SE HA DETENIDO ERROR 0X800106BA
  hacer los pasos manuals Québec explican in other responses concerned y no me permite run any .exe los steps in the system32 vidéoconférence
  Please select your language in the drop-down list at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below: 

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace:
  

  http://support.Microsoft.com/common/international.aspx

• I can't open several creative cloud app, error opens: ther'snt MSVCR110.dll in window 10 sistem

  I can't open several creative cloud app, error opens: ther'snt MSVCR110.dll in window 10 sistem

  Hi David,

  Please, try the following steps:

  Resolve the error "missing file msvcp110.dll.

  Kind regards

  Chirag

• No puedo ver mi proyecto web en sistema IOS, el error are that missing files...

  I am doing a project web site, cada vez as freight el archivo al servidor y quiero visualizardo sell me: error as the missing archivos en el servidor. In el sistema IOS not to can see the pages, cual fue mi error diganme como corregirlo y.

  Gracias

  Hello

  Please export the site muse in HTML format by choosing file--> export to HTML

  Copy the CSS folder that is created in the exported files and upload manually to the server using any external client like Filezilla FTP.

  Please let me know if that helps.

  Kind regards

  Neha

• HP 800ps: misaligned print heads and tracking errors

  It seems to have problems with the growth of transport often does not complete diagnostics because errors appear:

  error 79:04

  susprimitives., 221

  error 86:01

  carmotor.c, 2403

  error 7904

  Mech.c 1299

  error 02:10

  SB.c 228

  error 79:04

  Mech.c 1299

  error 02:10

  SB.c 228

  error 7904

  inkmem.c, 2257

  the plotter was hit, thank you

  

  It seems that that's what the user tried to do it like the example comes from the print head alignment.  First thing you want to do is to clean the MICR band that runs through the carriage Assembly and has fine lines.  Use a damp cloth and go easy on the encoder strip across from left to right and from right to left.  If necessary, turn off first on the plotter and when the carriage moves out of the right side, unplug the printer.  In this way, you will be able to move the carriage to the road that you clean the encoder.  Do not press fort or own to hard that these lines have been known to come off.  Slowly, switch a soaked cloth on one side to the other.  Now, it is clean when you get are more black marks on the canvas.  When the truck is off to the right, you want to move using the belt to see if the action is smooth or bumpy.  So chaotic that would indicate that the belt needs to be replaced.  The last element is transport crossings.  If you look down at the bottom of the carrage to rails, you will see a screw on each side of the carriage house.  Make sure that the screw is not loose.

• I got code 80070426 when I try to update my windows vista professional. I tried to start the sistem but I couldn t. An error pops up: "error 0xc004e002, Woindows cannot start the service. What can I do about it?

  Please your help!

  Hello

  It's the usual correction:

  Windows Vista 0 × 80070426 Activation Service not started or Validation not genuine error
  http://www.tipandtrick.NET/2008/Windows-Vista-0x80070426-activation-service-not-started-or-validation-not-genuine-error/

  ---------------------------------------

  You can try to run these to see if they help.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Description of the update for Windows Vista and Windows Server 2008 system preparation tool
  http://support.Microsoft.com/kb/947821

  --------------------------------------

  If necessary to start a free incident report:

  Click-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  and follow the instructions.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• El sistema esta lento y según muchos error arroja

  El internet is soon o cuando Habré to traba

  Lo sentimos, pero estos foros solo offer support in frances. Please choose you country here: http://support.microsoft.com/common/international.aspx> y haga click in the flecha para soporte in su idioma.

  Microsoft patrocina los foros para discusion has todos aquellos habla hispana para relevant information, dudas y temas Aduaneiras a participar interchanging ideas between if e.

  Aqui you pongo estos 2 URL

  http://social.answers.Microsoft.com/forums/es-ES/>

  http://social.technet.Microsoft.com/forums/es-ES/>

  Buena suerte

  UTC/GMT is 01:15 on Monday, February 27, 2012

• Mensagem erro:exception e os error in win 32 exe to 0001b23d sistem error module. Code: 126

  Esta aparecendo essa mensagem sempre ligo o not, pode ser o?

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
  http://support.Microsoft.com/common/international.aspx
  Thank you

• Designjet 800PS 21:10 then 86:01 - band coding?

  Hi everyone-

  I have a Designjet 800PS 42 ". After running is not for a week, he threw a 21:10 error. I have removed the right side of the machine, extract the gas station and he cleaned. He was in BAD condition and was about to sink to the ground.

  TIP: WEAR GLOVES. I don't have.

  During this process, I put at the beginning of the station back in incorrectly then the error remained. I then cleaned the rest of the machine, including the holes of the dust and the MICR band. Later, I realized my mistake, put it in correctly and the 21:10 error disappeared.

  Now I have a new error 86:01 that makes obstruction of paper.

  This is the process:

  1. in initialization: this is the position of the gas station. http://S17.PostImage.org/rklapk20f/image.jpg

  2. complete initialization: the chariot moves all the way to the left and right, then parks above the gas station (which moved in position). No errors. Message shows load paper. http://S17.PostImage.org/n19241k4v/image.jpg http://S17.PostImage.org/rymmp5m3z/image.jpg

  3. I load the paper and the cart moves to check. Paper rolls back and forth. etc. This is the image during this process that the carriage moves back to the gas station. http://S17.PostImage.org/uve936hbj/image.jpg

  4. transport moves slightly to the left and position, error 86:01. http://S17.PostImage.org/apar4alnz/image.jpg

  The belt is basically new. The trolley moves freely the length of the printer (by my measurement, see this video which shows what I consider that it is easy to get around - I'm using a finger on transport). Nothing seems to be it the way of the gas station. I think that it is free to move. Stem is lubricated. http://videobam.com/OGvAL

  I noticed that my band of coding is in poor condition. See this image. It is worn (exactly where the transport seems to stop). This may cause the issue? http://S17.PostImage.org/b3c33w5rj/image.jpg

  When I do a test of movement of transport, if I put myself to the test when the transport is parked above the gas station it moves slightly then stops. When I test in the Middle, it works perfectly.

  So my question is: is this likely to be the MICR band? Or have I given the station incorrectly (despite No 21:10 error)?

  THANKS IN ADVANCE!

  Replace the tape coding.

• error 0xC0000225, recovery partition does not start

  Hello

  I have a HP dv7 with Windows 7 Home premium 64-bit.

  A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

  So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

  A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

  I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

  I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

  Any ideas on how I can do?

  Thank you!

  It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

  I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

  I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

  After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

  Thanks for your all your support.

• error 2200

  Hola

  El software (Labview 10) compilar works correctamente, pero al instalarlo in another PC before con el mismo sistema operating system, 2200 sale UN error, he comprobado Los X as uso asi como algun dll esten también el el destino PC, pero sigue newspaper said error active.

  Alguien sabe algo.

  Gracias

  Respondo yo mismo, is that he found the causa.

  PASA en Windows XP solo

  The respond, aun as not very coherent, pasa por instalar el MAX en el destino reiniciarlo ago despues PC no vuelve a appear el error 2200