Error in the marquee tool.

Similar Questions

• Editing audio first in Audition, when the marquee tool, the changes do not take effect or I would like to export.

  Editing audio first in Audition, when you use the marquee tool to get rid of unwanted 'knocking' noise audio, the changes do not take effect or I would export after changes in the spectral display.

  No indication on how to save the changes to the marquee selection tool would be great.

  Hmm.  You did something for the audio in the selection?  It looks not to the file has been modified at all, and the registration option is not enabled, unless a change has occurred.  I suppose you try to remove or reduce the volume of the sound inside the selection rectangle, is that correct?  With this selection, you can press DELETE to remove it completely, or set the volume floating just above the selection of lower button.

  It also seems that you stopped reading, and while that save the selection under will be activated pause, of many other commands will not.

  So, try in the following order:

  1 stop playback.  Is File > Save now activated?

  2. otherwise, do some edit to this file.  You will know that the file is considered 'dirty' when an asterisk * appears next to the name of the file in the files Panel and the top of the editor Panel.

  3. There is no number 3.  I feel confident, one of the first two options will work.  Once the file is saved and overwritten, go back to the first and you should hear the content updated the.

• Can I lock the marquee tool to make the only rectangles?

  I lose track of the issue of whether the selection tool is selected - and press M to get, and often this means I get the circle marquee. Is it possible to lock the marquee tool to make a rectangular selection only? that is, I have to reach the top in the Toolbox to make the circle--as was the case in earlier versions of the PSD.

  There is one very annoying thing that I hope that they have considered!

  Correction: Based on the M key is changing your selection Rectangle rectangle, ellipse, then you should go to Edit > Preferences > General and tick "use Shift key for tool switch."

  This will require then you hold the SHIFT key before you press M and your marquee tool will stay on the rectangle.

• I lost the marquee tool cursor control

  Running PSE9 under MAC OS X 10.6.8 Snow Leopard.

  I was setting in flag of borders of several pictures using the marquee tool > select > feather > inverse selection > remove and it works well.  Then I started another picture and the marquee selection tool now won't give me a rectangle of varying size, but rather a little square that moves, but will not change its size (unlike the option shift which, if I understand correctly, lock in a square shape, but allows a change of size).  I have to hit keys wrong somehow, but what?  And how to return to normal operation?  Attached picture shows the small square in the upper left corner of my image.

  Oh yes, Happy New Year!

  

  To the left of the options bar is a small triangle. Click on it and choose Reset tool.

• The height adjustment of product with the marquee tool. How?

  When I use the marquee tool to draw a shape - square/circle etc. I sometimes don't get the size exactly to my needs. is there a way to fine-tune the size of the product? I guess that there is a key combination that will allow me to make fine adjustments upwards or downwards for the size of the shape. Does anyone know how to do this without closing and starting again and again until I get what I ask?

  Hello.

  In the toolbar, you can set a specific size in pixels or whatever.

  Or, you can do a right click on the selection and choose transform selection.

  Lee

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• Photoshop program error when the text tool is selected

  I tried to use the text tool in Photoshop and I am able to select the tool, but as soon as I place the cursor on my document, I get a program error. From there on, I have to force quit the program out. I downloaded an update of safety for my mac yesterday, but since I was not using the text tool in photoshop recently, I'm not sure if that had anything to do with this issue or not. Someone had the same problem?

  Would appreciate any help. Thank you.

  You must give us more information:

  -What system, what version of photoshop, the error message says, have you tried using a different font (maybe you have a corrupt font), you reset your tools, delete your preferences, etc.

• Odd choice issue when usign the marquee tool...

  boy, I hope someone knows the answer to that.

  When I chose something of an image and copy it to a new image (using the marquee, selection tool, select copy, paste it into a new image layers I'm trying)... I get the 1px boring 'edge' to the image that resembles a transparency of 50% around him.  My plumage is set to 0px.

  I have no idea where the parameter is to remove it.

  It's Photoshop CS3 10.0.1 on PC.

  Let me know.

  Dave was soon

  In the tool mark there may be a setting in "refine edge"?  Adjustments can be made once the selection is made.

• How activate you the marquee tool in the hearing?

  How?

  You must be in display mode frequency distribution for the selection tool enabled... Once you select the spectral display, it should be there for you

  

• ERROR OF THE OVF TOOLS

  Hi all,

  I would like to make my vm... ovf file I read on internet that to make the ovf file, I can use OVFTOOLS... then I studied the ovftool guide and I made a script with the code below:

  C:\Programmi\VMware\VMware OVFTool > vi ovftool: / / root:mypwd@ip_host_vmware/fs_x_vapp e:\FS_VAPP\fs.ovf

  is this correct? Did I miss something?

  The executed batch apparently correct, but in the end, he send me and error that I have attached the image (JPG)...

  The error is the following:

  "This application has requested the runtine to terminate in an unusual way. Terminate the process received signal - abandonment of operation. "

  Can you help me?

  Thanks in advance!

  I can't specifically talk about the ovftool, because I've never used.  However, using VMware vCenter Converter can be easier?

• My rounded rectangle tool is missing from the marquee tool Panel

  I don't know how to get it, or even if I had it before, the rounded tool translate is not loaded by default? See my screenshot to see what I mean

  

  Thank you all!

  And it is here if you like a column two tools Panel in Photoshop Standard Edition...  Click and hold on the position to see the selections of the replacement tool.

  

  Note that this is not (directly) a selection tool like the ones you are shown above, but creates traces or vector objects.  A path can be converted to a selection, however.

  -Christmas

• Limited to the marquee tool to document the limits?

  Why is dragging a selection with the rectangular selection tool now to limit the boundaries of the document, so that the elliptical selection tool is not?

  Thanks for the update.

  I just checked on my end and found that this is the expected behavior.

  Limits of Rectangle tool to the linked documents.

• get the selection instead of the puppet pin tool marquee tool

  I imported a png file in the new composition and wanted to distort the image with the puppet tool, but instead of the puppet pin tool that I always get the marquee tool

  tried to keep Alt, Shift, Ctrl, did not help

  puppet pin tool works fine on the other compositions. It's the first time I encounter such a problem with the puppet tool. What is going on?

  AE CS6 on win7

  First question, what size is this file? I don't see any dimension.

  Second question, it is necessary to have layers in this picture? Looks like you apply puppet pin on the entire fly.

  Third question, have you tried to reduce the size of the file in Photoshop to about the size of your computer and then saving it as a png 24-bit or single-layer PSD or tiff with an alpha channel?

  It is difficult to know because there is no detail about right PSD, but it could be wrong, too much color space, or have another problem that I don't see.

• Various measures between the ruler tool and marquee tool?

  I use Photoshop CS 5 Extended

  Why are there two different measures?

  I positioned guides on the image for purposes of measurement.  I have the snap-to Guides on. I used the ruler tool snap a guide and I extended a straight line to the other guide (the SHIFT key down). The ruler tool read 712 pixels.

  Then I used the marquee tool to align the guides and it read x 720 pixels.

  What you believe?
  

  raylaur wrote:

  Then I used the marquee tool to align the guides and it read x 720 pixels.

  Where?  In the Info Panel?  If Yes, have you read the W (width) and not the X (horizontal pixel position)?

  I just did what you said and got consistent measures.

  

  -Christmas

• Why the gradient tool has no effect?

  OK, so I figured out how to rub the head and tail of a piece with the marquee tool - why must you select Tools twice?  Why are there two selectors side-by-side? - and now, I'm trying to get the Fade tool at work.  After selecting the Fade tool (twice!), I can highlight the region at the end that I want to disappear, but he does not draw a fadeout, and it has no effect whatsoever.  The documentation says to just drag and they appear.  And Yes, I have a zoom of the track at the bottom of the screen, I work with (where I select the Fade tool (twice!) once again).

  Is there something about this program that is intuitive and logical, or it should be hostile user?  Laughing out loud

  TIA,

  GEO

  Bleaching works fine here...

  

  The tool the leftmost is the tool of the left mouse button, the Center is what the mouse pointer becomes when you hold the key, command key, and the right is assigned to the right mouse button.

  

  You can exchange this behavior for other behaviors here:

  Logic Pro > Preferences > General > edition