Odd choice issue when usign the marquee tool...

Similar Questions

• Editing audio first in Audition, when the marquee tool, the changes do not take effect or I would like to export.

  Editing audio first in Audition, when you use the marquee tool to get rid of unwanted 'knocking' noise audio, the changes do not take effect or I would export after changes in the spectral display.

  No indication on how to save the changes to the marquee selection tool would be great.

  Hmm.  You did something for the audio in the selection?  It looks not to the file has been modified at all, and the registration option is not enabled, unless a change has occurred.  I suppose you try to remove or reduce the volume of the sound inside the selection rectangle, is that correct?  With this selection, you can press DELETE to remove it completely, or set the volume floating just above the selection of lower button.

  It also seems that you stopped reading, and while that save the selection under will be activated pause, of many other commands will not.

  So, try in the following order:

  1 stop playback.  Is File > Save now activated?

  2. otherwise, do some edit to this file.  You will know that the file is considered 'dirty' when an asterisk * appears next to the name of the file in the files Panel and the top of the editor Panel.

  3. There is no number 3.  I feel confident, one of the first two options will work.  Once the file is saved and overwritten, go back to the first and you should hear the content updated the.

• Can I lock the marquee tool to make the only rectangles?

  I lose track of the issue of whether the selection tool is selected - and press M to get, and often this means I get the circle marquee. Is it possible to lock the marquee tool to make a rectangular selection only? that is, I have to reach the top in the Toolbox to make the circle--as was the case in earlier versions of the PSD.

  There is one very annoying thing that I hope that they have considered!

  Correction: Based on the M key is changing your selection Rectangle rectangle, ellipse, then you should go to Edit > Preferences > General and tick "use Shift key for tool switch."

  This will require then you hold the SHIFT key before you press M and your marquee tool will stay on the rectangle.

• The height adjustment of product with the marquee tool. How?

  When I use the marquee tool to draw a shape - square/circle etc. I sometimes don't get the size exactly to my needs. is there a way to fine-tune the size of the product? I guess that there is a key combination that will allow me to make fine adjustments upwards or downwards for the size of the shape. Does anyone know how to do this without closing and starting again and again until I get what I ask?

  Hello.

  In the toolbar, you can set a specific size in pixels or whatever.

  Or, you can do a right click on the selection and choose transform selection.

  Lee

• I lost the marquee tool cursor control

  Running PSE9 under MAC OS X 10.6.8 Snow Leopard.

  I was setting in flag of borders of several pictures using the marquee tool > select > feather > inverse selection > remove and it works well.  Then I started another picture and the marquee selection tool now won't give me a rectangle of varying size, but rather a little square that moves, but will not change its size (unlike the option shift which, if I understand correctly, lock in a square shape, but allows a change of size).  I have to hit keys wrong somehow, but what?  And how to return to normal operation?  Attached picture shows the small square in the upper left corner of my image.

  Oh yes, Happy New Year!

  

  To the left of the options bar is a small triangle. Click on it and choose Reset tool.

• Select an exact size of the image to be copied when you use the "Marquee" tool

  How can I select an exact size of the image to be copied when you use the "marquee"?...

  I like to choose a section image of 14.00 x 12,00... When you use the marquee selection tool, you can not control the mouse to select exactly 14.00 12.00 x is always a little higher or lower at 14:00 or 12: 00 am...

  is there a way that you can easily select the exact size of 14,00 x 12,00?...

  Please advise...

  see you soon,

  Hi wong168,

  You can use the fixed size option and enter the size in the input fields using the unit of measure of your choice; That is to say in, px, cm etc.

  If you right click in the entry boxes there are the list of measured values.

  

  

• Why is my spell express outlook stuck on French and don't have any other choice of language in the option Tools/pull down?

  When I do a spell check in outlook express, all I get is French. When I go to tools/options to change the language, the only listed choice is French. What should I do to recover my English?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974

  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.

  Vampirefo spell check.

  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952

  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html

  You wanted TinySpell or. (Check spelling while typing).

  Download it here:
  http://www.tinyspell.M6.NET/

  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/

  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• It rounded corners why when I use marquee tool?

  I use Photoshop 7.0, but hope someone can help me, even if it is old.

  I frequently use the marquee selection tool. It is always used to have straight corners, but last week, he started to automatically of rounded corners. I have not modified parameters. Why does this happen?

  I mention that I'm using InDesign CS2. I've worked with rectangles with rounded corners it recently, but each time changed the corners manually. After a few weeks, but the program began to automatically change each rectangle with rounded corners. I didn't know how to change it, but after a few weeks he returned to corners automatically.

  I use Windows Vista. Initially, he had some problems to go with Photoshop and InDesign, but now it works fine most of the time.

  check the amount of your bet in flag in the Options bar, make sure that it is set to 0

• Photoshop CC 2015.5.1 Crash when select the Notes tool

  With the help of Windows 10 birthday. Update, Photoshop CC 2015.5.1:

  Open a picture

  Select the eyedropper - Notes-> Get the ruler tool tool (can not select the Notes tool)

  Scroll to the top, color sampler tool select-> Photoshop crashes

  This error will not occur on previous versions of Photoshop (CS6, CC 2015).

  Solution?

  It would be useful to reset the Photoshop preferences.

  Click on the link below,

  Photoshop preferences

• How activate you the marquee tool in the hearing?

  How?

  You must be in display mode frequency distribution for the selection tool enabled... Once you select the spectral display, it should be there for you

  

• Issue when executing the planning of business rules

  Hello
  
  I get the following error when trying to run a Planning Business Rules of EPMA production environment. The same rules of business work without any problem in UAT which is exactly in line with the production.
  
  Getting the following message while starting business rules:
  
  Error detected while trying to perform the work: naming rules
  
  Newspaper:
  
  [ACTIVE] ExecuteThread FATAL: '2' for queue: com.hyperion.planning.calcmgr.HspCalcMgr '(self-adjusting) weblogic.kernel.Default"- cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  -Cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  
  FATAL Thread-2352 calcmgr.launch - Server/Application/base of data: localhost Business Rule Name: user: M05 FP data planning.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  Please could someone tell if you're aware of something like this?
  
  Thank you
  Jean

  Remove essbase Server console of Regional service,
  Add Server Essbase with IP address or host name and try again.

• My rounded rectangle tool is missing from the marquee tool Panel

  I don't know how to get it, or even if I had it before, the rounded tool translate is not loaded by default? See my screenshot to see what I mean

  

  Thank you all!

  And it is here if you like a column two tools Panel in Photoshop Standard Edition...  Click and hold on the position to see the selections of the replacement tool.

  

  Note that this is not (directly) a selection tool like the ones you are shown above, but creates traces or vector objects.  A path can be converted to a selection, however.

  -Christmas

• Error in the marquee tool.

  I am currently working on the cropping of photos.  All of a sudden, my Rectangle tool converts the elliptical tool every time I

  try cropping.  I tried everything, but the elliptical dotted line appears in the middle of the picture whenever I try to create a

  rectangular cultures.  I'm sure it's probably just a simple mistake on my part, but I don't know what it is.  Thanks in advance.

  Them

  First, make sure you select the Rectangle tool

  and not the elliptical Selection tool, which shares the same tool housing.

  

  Also check that the pen is set to 0 (zero).

  

  MTSTUNER

• CS6 hangs when using the Brush tool

  Hello

  I m using:

  Adobe Photoshop Version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64

  on Windows 7 64 bit

  My problem:

  When I do the following:

  -move a picture (place it somewhere)

  -Open a layer (dosen´t matter if it s black or white)

  "crash" and then click the tool brush CS6

  The error that says: CS6 dosen´t longer works... try to solve the problem... because of an error, the program does not work properly, you will get a message if a solution is available.

  
  

  
  

  Can you tell me whats wrong?

  
  

  Greetings

  The problem was a graphics driver crashed. Pilot has worked well since the last update of the PS. A re-installation of the driver GET the solution, I ve found the flaw in the Preferences

• Error when installing the Toshiba tools and energy savings

  Hello

  I have a Satellite A100-771 and installed Windows XP Professional with Service Pack 2.
  Subsequently, I installed all the drivers. After that, I wanted to install the Toshiba Utilities and received an error message: "Toshiba common Module not found! This configuration will end."
  Also, I tried to install the tool of Eve, which is more important than the uilities I think. And here, I got the error message: "a fatal error has occurred. The program will end. "Code: 0x7E.
  I don't know what I can do. I also installed the patches for Windows that are on the Toshiba ToolCD. But the problem is still there.
  The difference between these two errors, is the installation of the configuration of the utilities stop before finishing the installation. On the installation of safer food, she completed at 100% and put an end to the installation or the program after installation.

  Maybe someone can help me.

  Eathen

  There is that drivers and utilities Toshiba should be loaded in a certain order. This list is located on the Toshiba download page, and the modules common is a the first utilities that must be charged for others to work