Error in the Windows registry

Similar Questions

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• LVRT 8.5 in the Windows registry: where is it?

  Hello

  I am not satisfied by the System Installer OR. So, I moved to thing as NSIS (http://nsis.sourceforge.net/Main_Page) that is spectacular so far and gives really a total control over all aspects of the installation/uninstallation process.

  So I made my request with LV 8.5.

  The idea is that during installation, the NSIS installer will check if the TERM Labview 8.5 is installed in the system, if so, it will continue the installation, otherwise it will start the installation of the LVRT 8.5 first.

  Then, in the Windows registry, where I can find information on the presence of the LVRT 8.5?

  In other words: when I correctly install the LVRT 8.5 in a computer running Windows XP, the strings and Dwords it will write in my registry? and in the paths of the registry?

  Thank you

  PS: Windows Vista? There a registry?

  Hello Pierre,.

  You are right.

  The registry keys written by the development environment or just the execution time are the same.

  So, just as you said, you will find them under HKLM\Software\National Instruments\LabVIEW Time\8.5 run.

  Kind regards

• error downloading the Windows install cleanup

  error downloading the Windows install cleanup, c:\docume~\owner\local~1\Temp\ixp000.tmp\startmsi.vbs do not know what to do.  Help, please

  Hello timbo 1976,.

  The Microsoft Installer Cleanup (MSICU2.exe) utility has been removed as this may damage some of the files on the computer. The tool has been replaced by a new installation and uninstall set, you can download and run the tool from here:

  http://support.Microsoft.com/kb/2438651

  Hope this helps

  Bobby

• Online backup is unable to update its settings in the windows registry. Your connection profile must support access to the registry to be able to use the online backup.

  OT: Online backup.

  When I try to use quicken backup, I get this message: online backup cannot update its settings in the windows registry.  Your connection profile must support access to the registry to be able to use the online backup.  Please run the Setup program by using the run as Administrator option.  How can I do this?

  Right-click on the file and choose Run as administrator.

• video files preview 'this file cannot be previewed because of an error in the windows media player manager rich low."

  I used to be able to watch VIDEO (including the .avi) files in the preview pane in windows Explorer, but it has since stopped working. This change took place after the update to the latest version on windows media player. (version 12.0.7601.18150)

  attempted fixes:
  1. in options from files of the variations of tab - all reviews of checking / unchecking "always show icons, never thumbnails" and "show previewhandlers in the preview pane. the first has nothing to do with this problem. However, the 'show previewhandlers... '. "when checked this error message is displayed in the preview pane" "this file cannot be previewed because of an error in the windows media player rich preview Manager." When unchecked the poster preview pane a thumbnail with the icon of the program it is supposed to open, in the present case, WMP, this correction allows the preview of the PHOTO but NOT of VIDEO. " also I reset by default, of course.
  2. they also examined the options under system settings panel-advanced control and troubleshooting without success.

  all the less someone ' one can confirm that there is a problem with windows media player? or it comes from windows Explorer?

  UPDATE:

  I found this temp. The difficulty of the problem:
  https://www.YouTube.com/watch?v=xBgrJ3XO-Z8

  This shows that the problem is with WMPRPH.exe (Windows Media Player Rich Preview Handler) it happens when wmprph farm, now if someone knows how to impose this program to continue to work as it should which would solve my problem.

• How can I add a product to my Adobe account or locate serial number by using the Windows registry?

  I can't find my receipt of e-mail on my purchase of CS6 end 2012. (I had a long illness, packed things away and now experience some loss of memory) I want to start again use my CS6 and thought that I would be able to go to my Adobe account to retrieve my serial number. However, my account does not show the order or registration of CS6 under my products even if I received an email from Adobe System Incorporated, welcoming me and thank me for my purchase. Cat officers do not find the corresponding product to my e-mail and refuse to make exceptions or provide assistance to a disability or illness. They say that they must have the right email address associated with the product or a proof of purchase! Other software companies have helped me to locate the serial number by using the Windows registry and then had me answering security questions. I even offered to fix the Adobe email thanking me for buying the CS6, but they said, it would not help! Does anyone know if/how I can add the CS6 to my account and get partner to my email address? Maybe Adobe cat could help me? Also, does anyone know if an encrypted version of the serial number is indeed somewhere in the Windows registry, which make possible for Adobe to help me, if they were ready? This software was very expensive and I don't understand why they won't help me if they could.

  Belarc Advisor | PCWorld

• Print directly to the printer option in the Windows registry

  I need to find the location for the option "Print directly to the printer" in the Windows registry.  I am trying to create a GPO to enable this option when connecting and I can't find the place for that.  Is this possible to do?  If not, is there another way to activate this to start for all users?  We run Adobe Acrobat X on Windows 7 Enterprise 32-bit.

  Thank you

  This parameter is actually a printer in Windows, not in Acrobat.

  Take a look at this KB from Microsoft for general admission locations.  Each printer according to OEM may have different entries according to the document.

  http://support.Microsoft.com/kb/102966

• Can someone point out code examples on how to access the windows registry?

  I'm new to the Acrobat SDK/Visual C++ and would like to know how to access the windows registry to view the identity of the current user of the reader.

  I know it's at the following registry location:

  HKEY_CURRENT_USER\Software\Adobe\Adobe Reader\9.0\Identity

  I don't know how to access programmatically by using Visual C++.

  Thank you

  Gregory

  There is nothing special a plugin regarding the registry - standard OS calls work fine.

• How to check the Windows registry for you ensure that it is correct in Vista?

  How a 'clean', or their "Windows registry", to ensure that it is still correct? Windows has a program, or the download for this?
  * original title - how can I check or clean, my Windows registry? Windows have a program, or download for this? *

  Hi rickfaulkner,

  ·         You receive an error message for the registry entries?

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/are-registry-cleaners-necessary

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• Help! Problem with the windows registry

  Hello

  For the past few months I am not been able to apply windows updates and get code 646 and some windows registry errors, I would like to know how to repair the registry errors...
  Example: C:\Windows\System32\cmd.exe
  The NTVDM CPU has encountered an invalid statement
  CS:1237 IP:0156 OP:c5 f5 d8 4f 97 choose 'Close' to terminate the application.

  C:\Windows\System32\cmd.exe
  The NTVDM CPU has encountered an invalid statement
  CS:1237 IP:0160 OP:f0 22 bf 5th bb choose 'Close' to end the application.

  Thank you
  Kiran

  Hello

  For update problems:

  Try to disable UAC and then make below.

  Panel configuration-Classic view - user accounts - turn User Account Control Off

  How to turn User Account Control (UAC) on or off in Vista
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  ------------------------------------------------------

  After the foregoing:

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this click - Control Panel - Windows Updates - updates that will be installed not - the
  Important updates or update itself - double click one, and then click View more information
  (or click on it and then discovered on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool
  and for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups
  who might have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error 1719: The Windows Installer Service could not be accessed

  Original title: Please help, almost nothing works: video, audio, internet, most of the programs.

  It is a long story and it arrived a bit at random so I have no idea where to start, but I'm going. While trying to install autodesk software, I received the message: Error 1719. Install the WIndows service could not be accessed. This can happen if windows install is not properly installed. Contact your support team. I didn't know what to do so I rebooted and that's where the trouble started. I'm unable to play any audio or video. I am unable to connect to the internet as there is no connection available, but I'd just been connecting to my wireless home network earlier. I am unable to do a system restore because I got the message: System Restore is not working properly on this system. A volume shadow copy Service component has encountered an unexpected error. See the log even application for more information. (0 x 80042302). I think that this problem may have to do with a corrupt registry or some proxy problems or something. I tried to reinstall drivers, but I'm unable to access my cd drive to launch the backup drive drivers provided by microsoft. Please help me, I dual boot ubuntu is how I can access the internet. It must be a software problem if I have my other OS works perfectly. NEEED HELP SO BADLY. THANKS in advance.

  Hi cweb512,

  ·        You have opened a session in normal mode?

  To check that we will follow the tests below:

  (1) you see the mode without fail at the ends of the screen?

  (2) otherwise, and then check the status:

  a. click on start

  (b) in the search box, type msconfig

  c. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  d. under the general tab, make sure a Normal startup is checked.

  e. If not click the option and restart the computer

  Check the status of the Volume shadow copy service and the Windows service install in the services window. Use the following steps to check:

  a. Click Start and type services.msc in the search box

  b. search for services

  c. make sure that the startup type is automatic. Steps to set the auto services

  d. right-click on the service

  e. If the service is stopped and then starts the service

  f. Select Properties

  g and in startup type, select automatic

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Customization in the windows registry file 8 is missing

  I sometimes changed the lock screen image and everything worked well.                                                                                             But no reason known, I cannot now edit or delete the current picture and I get an error message "Setting of the lock screen has failed, please try again" this also occurs when you try to change the image of the account.

  After doing some research, I have been guided in the records of the registry;

  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Personalization

  But when I failed the Windows folder, there is no customization file it contains.                                                                              I don't understand why he would be missing. Can someone tell me how to restore this folder and the key that it contains?

  Thank you

  Hi Gorgon,

  Thank you for being part of the Microsoft Community.

  This occurs generally if there are changes that happened in group policy. I would suggest trying the following methods and check if it works for you.

  WIN8: How to handle the screen lock on Windows 8 and Windows Server 2012 Image:

  http://support.Microsoft.com/kb/2787100/en-us

  Please reply with the status of the issue, so that we can better help you.

• Control switch radio wireless (Fn + F5) via the Windows registry / software

  In a school environment, students have discovered that they can cause problems using the software switch Fn + F5 to turn off the Wifi radio. I know that the material LED turns off when this happens, but the teachers are too busy to identify it. The result is that users are unable to connect, and the Windows Welcome screen is not quite intuitive, which gives a message error "there currently no server connection.

  I am interested in applying a "fix" to this problem at startup. Maybe a fix Windows registry to "force" the Lenovo software switch to turn on the Wifi.

  I had a bag autour with a comparison of registry Interstate market and am currently getting the following (among other changes, such as DHCP etc.) diff:

  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000000
  HKLM\SYSTEM\ControlSet001\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000001
  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000000
  HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0018\RadioEnable: 0x00000001

  However, forcing these dwords to 0 x 1 doesn't seem to be enough to turn on the radio.

  Has anyone else had a similar experience? Is there a BIOS/UEFI underlying setting that might be able to be accessed via the software?

  Acxtually that I found after searching a bit more. Can be controlled via the command line:

  "C:\Program Files\Lenovo\HOTKEY\TpFnF5.exe" /wlon