Problem with less available graphics memory.

Similar Questions

• I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

  I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

  This solution could not be downloaded

  --------------------------------------------------------------------------------

  The most likely causes:
  Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  --------------------------------------------------------------------------------
   
  I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

  Download and install the latest driver for your graphics card nVidia.

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problem with Standard VGA graphics card

  Hello everyone!

  I have problem with Standard VGA Graphics Adapter.

  State of the device: this device cannot start (code 10)

  My specs are:

  AMD Radeon HD 6470M

  Intel Core i3 - 3110 M CPU @ 2.40 GHz 2.40 GHz

  RAM: 4.00 GB (2.41 GB usable)

  Type of system: operating system Windows 7 32-bit

  Can someone help me with this problem! I can't start my games!

  Please, I beg you! Everyone!

  Hello:

  When you see the label adapter VGA Standard, this means that the graphics driver is not installed or improperly installed.

  Go to the page of the driver and support for your laptop and install the graphics driver from AMD W7 32 bit.

• I have a problem with the ATI graphics driver.

  My laptop has rebooted, twice so far, as I was watching an episode of a series, and in the center of the action it is said that: a problem with ATI Graphics Driver and the ATI graphics card has stopeed working 2 times, last occurring on the 11.06.2014 13:36.Steps are available to solve this problem... .but when I click on it it says that;

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  ... and I searched the internet on the microsoft.com site, and the page is like this:

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.

  What can I do?

  You should go to this site and make sure you have the latest drivers for your video card.

  http://support.AMD.com/en-us/download

• Satellite A200-1YX - what is the maximum of the available graphics memory?

  Hello

  I have a 1YX Satellite A200 with an Intel Graphics Media Accelerator on WIndows XP 32.

  On the Toshiba website says (http://eu.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=EU&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w .broadvision = Yes & PRODUCT_ID = 144755) as my maximum graphics memory is up to 358 with 2 GB of RAM but in my DirectX says that my maximum graphics memory is 128, and I have 4 GB of RAM.

  How can I increase it? I have the latest drivers.

  Hello

  The video RAM will be automatically assigned and t, you can change it. This means that if the system is in need of video RAM more then it will be automatically assigned more video RAM.

  But I put t understand why you need more like video 128 MB of RAM. I think that's enough, because the graphics chip isn't designed for games.
  There are maps better graphics in the games market.

  Good bye

• problem with a block of memory in labview 2009

  Hi all

  I have "ERROR: MapLib:979 - LUT4 symbol" during the compilation process (lots of errors like this), and I discovered that the reason of my problem is block of MEMORY.

  To be sure that the problem is in this block, I did a very simple project in LabView 2009 (on FPGA Target PCI5640R) only with the use of this block you can see in the photo, as well as in file test_memory block.lvproj attached link: https://www.dropbox.com/sh/u87f1oihelmm4dq/Jo_6-bICSf

  

  I have a problem with compiling VI with this block, and I have so many errors like:

  ERROR: MapLib:979 - LUT4 symbol
  "window/Thatcher/n_00000036/nSCTL_00000013_00000014/n_000000A3/cOutLoc<0>1.
  (output = window/Thatcher/res000001ed_wi<2>) is the input signal
  "window/Thatcher/res0000020d_wo<1>" that will be deleted. See Section 5 of the
  Map a report file to find out why the input signal will become conveyors.

  or

  ERROR: MapLib:978 - LUT4 symbol
  "window/Thatcher/n_00000036/nSCTL_00000013_00000014/n_000000A3/cOutLoc<23>1.
  (output = window/Thatcher/res000001ed_wi<25>) is an equation that uses
  input pin I2, which no longer has a connected signal. Make sure that all the
  the pins used in the equation for this LUT are signals that are not cut
  (see Section 5 of the report file map for details on which signals were
  adjusted).

  Entire report, you can see in the file report.txt on the attached link.

  I would appreciate if someone could take a look at my problem with simple project and suggest me a solution.

  I'm really stuck with my biggest project which need to have this memory block.

  I'm looking forward to hear from you,

  King looks

  ING. Damir Hamidovic

  Hi all

  I find a sollution to my problem.

  In memory-properties-general-setting up, I changed the block to look up Table memory, and I compile memory.vi and run it successfully.

  I did change as you can see on the picture:

  

  Just, can you tell me is it all "bad properties" and limits the use of this type of memory (Look up Table) of the implementation?

  King looks

• Problems with tdms built executable; memory.cpp write error

  Hello

  I have a problem with writing tdms files in bed which executable, that I created with the Builder application in LabView 8.2.1.

  I created a small requesting readings some channels in the DAQmx. This schould results written in a PDM file. All this happens within a while loop, even the steps open-entry-closing-PDM.

  This test in the development environment everything is fine. But if I create an executable file and try this on the same and other computer, I received an error warning.

  The error that says: error on line 342, memory.cpp

  Is there anyone who has any idea what is the problem? What I have to insert something in the creation of PDM application designer?

  best looks, T.Malec

  The problem of TDMS is special to 8.20. However, you cannot run the executable with a new runtime, because the compiled code is not compatible between major releases (example: code compiled with 8.5.0 will run on 8.5.1, but not on 8.6.x).)

  Herbert

• Problems with e250 and SD memory card?

  Basic information about the player: e250, 2 gig, version 1, 01.02.24 has

  Basic information on the SD card: Sandisk micro SD, 2 GB

  I have my sansa for a year and a half, and I have never had any major problems with it so far.  Recently, I had to remove the songs to put on the new songs due to lack of memory, so I decided to buy a memory card for it.  Getting the empty memory card I inserted and recognized my drive and everything was fine.  The problems started when I put songs on the memory card.

  I put my player in MSC mode (as indicated in the manual), it is hooked to my computer (windows XP), and everything was fine.  I used windows media player to synchronize music on the memory card, then picked up my drive.  It is restarted, as he should, and I went to listen to music I would put right on and yet once again, it was fine.  Then, I wanted to listen to my music, and he flipped out on me and wouldn't let me play it.  After determining that it was not just this song, I removed the memory card and tried to play the old music, but he would always let me.  A small red box saying 'Wrong way' just kept popping up.

  I decided to start over, so I have deleted all of the player (via the computer) and then attempted to deliver music on.  I tried a few songs, sync and play the two media of windows and my computer says that the songs were on the player.  To get the player from the computer, I went to "songs" and saw that it was always empty.  I hung up, and the computer says that these songs are on the player.

  In a nutshell: my computer says it is synchronization of the songs to the player, but in reality, it isn't.  This has only started to happen after I had the memory card.

  If someone could help me, that would be great.  Thank you!

  I don't think that Windows Media Player will work in players v1 in MSC mode. It must be in MTP mode for WMP to recognize. In addition, with the cards in players v1, you HAVE to add/remove music in MSC mode only by drag and drop from your computer to the card (read as a drive in Windows Explorer). You have to treat the reader and the card as the "separate entities", even if physically they are connected. Once music is on the map, the player will fit perfectly on both songs.

  In what concerns the "bad tracks", you need to run CHKDSK to repair corrupt files, so you can remove them properly. Answer NO when it asks you if you want to save the files "bad strings" (or something like that). Check the 'sticky' & the FAQ at the top of the body for specific instructions on running CHKDSK. While you're at it, also check out & play on your player of formatting, as you should probably next to you to go to a clean slate.

  I believe that files (songs) put on using WMP in MTP mode can ONLY be played in this mode, and MSC placed files using drag ' drop can be read in THAT mode, which can be part of your problem. Probably best to start fresh and then don't forget you must manually put the songs on the map in MSC mode.

  Another oddity of SD cards (at least with players of v1) is that you must also manually add the 'album art' to the file containing the music if you want to see the album art that song. With WMP and MTP mode on the player, it will play the album art embedded in the ID3tag. It will not do this on the SD card . You can see specific instructions on how to do it here. There is also a video showing the procedure here.

  I hope this helps...

• problem with the computer graphic

  I have windows 7 ultimate and have updated my directx9 to directx11 but when I run nfs game mw13 it says directx10 or best graphic is necessary. my windows version is also compatible with the game so now what can I do?

  Please... Help.

  Hello

  Try to update your graphics driver. You can find the driver in your computer manufacturer's website. If you directx11 on it already, then it should be no problem with it. I suggest that you run the directx diagnostic tests.

  David

• Problem with localization and graphic (pt_BR)

  Hello
  
  I am having some problems with the location and the graphics. I have a series that has a date and a value in the format: (2000.00) where the period (.) is the thousandsSeparator and the comma is the decimalSeparator. But to the vertical axis, the values are in the format (2,000.00) (comma for thousandsSeparator) and the dot for the decimalSeparator
  
  I ve tried to create the mining assets to pt_BR framework and recompile the project, but it didn't work. I know it's related to assets mining framwork but I don't have any ideas for what I can do. One solution is to change the format of the values of the series, but I don't like this solution.

  I found the solution:

  I created a parseFunction to the VerticalAxis:

  public void corrigeValor(value:String):Number {}
  var nb:NumberBase = new NumberBase(",",".",",",".");
  Return parseFloat (nb.parseNumberString (value));
  }

• Problem with the ATI graphics card in 200 M in a Satellite A110-334

  The computer is used both for the office and home (games, music, etc.)
  One issue after 6 months of use, but I can't get around it.
  When I start Quake 3, everything is good I can play for us Let's say 10-20 minutes.
  After that, I got a Blue Screen of Death, saying it was a mistake of memory connected with the graphics card.
  Windows "tells me" to change the graphics card (it isn't is not something I can do with a laptop ;)) or to contact the producer of material to change the bios because that something could be wrong.

  Well just thinking I could do on my own was to change the drivers (I found a few compatible with my card) but that did not help. I also tried to change the memory embedded amount used by the card (it uses x amount of available RAM), but does not

  Hello

  what you´re to help drivers?

  Already checked these drivers:

  http://www.OmegaDrivers.NET/

  Maybe it helps. Otherwise, you must send your machine to a service partner chartered for a checkup of material given that your machine is still in warranty and it won´t costs you nothing.

  Here´s a link to find the nearest ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Concerning

• Problem with 16 GB Sandisk memory card

  Hi all

  I just bought a Clip Zip and use a Sandisk memory card to use with it. Unfortunately, while most of the library, there are a few artists who don't. I tried moving them on the player's memory, and then they operate, so it seems to be a problem reading the card, rather than the tags of the files. I bought the card from Amazon, so I eliminated the possibility that it might be a fake card. Does anyone have any suggestions as to what may be the problem?
  Thank you very much for your help!

  How many records you on the drive? Keep inmind that the zip has a database of song 8000 limit. anything above 8000 will not be crawled and appear not in the menu. If you have less than 8000 files can you put some of the bad files so we can take a look?

• Problem with the AMD - graphics - ATI Radeon graphics cards

  I have a custom built laptop out of the list P170EM QuickSpecs
  Intel Core i7-3820QM processor
  32 GB OF RAM
  AMD Radeon 7970 M graphics card
  Windows 7 Professional (64 bit) OS

  I had an unexpected shutdown of the blue screen after the opening of Autodesk Maya 2013 64 bit and try to resize the window almost immediately a graphics error. I'm used to doing things like this easily on this platform. But this time, Maya crashed managed to send an error report, then windows crashed, and then the blue screen went up. Now, I have a PC problem indicator that corresponds to the title of this post. When windows is running the Troubleshoot utility, I get this:

  This solution could not be downloaded most likely causes:

  • Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  Of course, I'm connected to the internet because I can post this message. Any help would be appreciated. Below is my info BlueScreen.

  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  BCCode: 116
  BCP1: FFFFFA801DCDA4E0
  BCP2: FFFFF88003DA3AE4
  BCP3: 0000000000000000
  BCP4: 0000000000000002
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1
  Bucket ID: X64_0x116_TdrBCR:2_Tdr:2_IMAGE_atikmpag.sys
  Information about the server: 710f09fb-c4c9-40f9-ba8f-eb457e4f953b

  Hello

  Thank you for contacting Microsoft Community.
  The problem is with atikmpag.sys. I suggest you to update software and drivers. If no update is available, uninstall the drivers and software, restart the PC, install the drivers and software, restart the PC and check. If the problem persists, answer here.

• Problem with the latest graphics drivers Intel 82830 M graphics Satellite 1100

  I have a 1100 Satellite with the Intel 82830 M graphics card. The latest driver is version 14.7 which I just installed - icon of graph in the right lower corner of a multicolored square changes a blue screen when you install this, and the mouseover text says "Intel(r) Extreme Graphics.

  However, since installing it, my screen freezes everytime I start a game, or if I go into display properties & change anything. A hard reboot is required. Also, the startup process takes 2 - 3 times as long since this upgrade.

  Everyone knows about this problem? Does anyone know of a solution? I've seen a few posts on other forums about this, including some say that this problem came from XP Service Pack 2. Can anyone confirm this?

  Hello

  I assume that you have installed the driver for graphics card on the Intel site and you do NOT use a graphic driver Toshiba, which has been designed especially for the use of the laptop.
  Well, Toshiba recommend that you use the drivers from Toshiba. In this case, you should try to use the recommended graphic driver that you can download from the Toshiba driver page.