error in voce not found

Similar Questions

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• error pages 404 not found

  I have a HP vista Home premium sp2.  When I try to update windows, then view update history - I get an error 404-page not found. This happens on any window of the window. If I click on a hypertext link, I get the 404 error message. Any thoughts?  greynoodle

  Hello

  Welcome to Microsoft answers forums!

  How long have you had this problem?

  What version of IE are you using?

  Are you able to browse other Internet sites without any problem?

  What happens if you click on a link hyper in safe mode with networking?

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).
   
  To start your computer in safe mode, you can check the link below:
   
   http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  Run an online virus scan and check.

  Microsoft Security Essentials offers protection in real time to your PC at home that protects against software viruses, spyware and other malicious software.
   
  Please see the link below to launch the scan:

  http://www.Microsoft.com/Security_Essentials/

  I hope this helps.

  Kind regards

  Savan - Microsoft technical support.

• application startup error: module 'net_rim_networkapi' not found

  Hello
  I'm a BlackBerry Connect for my thesis.
  to test the application, the University gave me a blackberry bold 9000, firmware v 4.6.0.303, but when I try to start my request, he said "MyApp from error: Module"net_rim_networkapi"not found."
  I used the BlackBerry Java SDK 6.0.0.30

  5 SDK won't help you, unless you upgrade your phone for OS 5 (which is possible).

  If you use the plugin + eclipse by default, you can change the version of the JRE used in the build properties.
  If you are using APIs that are 6.0 only, you will need to rework your program - or use a BB with OS 6 or later.

• Error: Type was not found or was not a compilation constant: AlertDialog.

  I tried to compile one of my PlayBook AIR applications using the SDK of AIR BB10 tonight and got:

  Error: Type was not found or was not a compilation constant: AlertDialog.

  The command I used to compile was:

  Set JAVA_HOME = e: files (x 86) \Java\jre7
  set PATH = % PATH %; E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0\bin

  CD E:\Users\Daniel\Dropbox\Apps\iTunesSync\Version0.3
  mxmlc + configname = air - library-path +=. iTunesSync.as o iTunesSync.swf - swf-version = 10

  This works if I use the SDK 2.0.0, but doesn't if I'm using 3.0.0.

  Strange.

  I confirmed that AlertDialog is always present:

  https://developer.BlackBerry.com/Air/beta/APIs/QNX/dialog/AlertDialog.html#includeExamplesSummary

  In BB10, device skins (and others) require the ANE must be loaded with the installation.

• [ERROR] Feature is not found in any extension (org.apache.cordova)

  Hello

  I am trying to compile and sign my application and faced with the question:

  c:\BBWP\bin>java-jar bbwp.jar 'C:\Project\Projet RIM\App\Test.zip' g - o "C:\Project\Projet RIM\AppSigned" mypassword
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [ERROR] Feature is not found in any extension (org.apache.cordova)

  The configuration is based on:

  > JDK 1.7

  > Ant 1.8.4

  > Blackberry SDK 2.3.1.5 Webworks

  > PhoneGap 2.0.0

  I have alread experienced solutions on several forums, such as:

  https://groups.Google.com/Forum/?fromgroups=#! phonegap/hY6bkLJWEVA/topic

  http://StackOverflow.com/questions/10978834/PhoneGap-1-8-BlackBerry-failed-to-find-feature-with-ID-o...

  but without success.

  The error still remains.

  Is someone can help me?

  THX

  Sorry if I posted this message in the wrong queue. I found the solution to my problem:

  I have not used the Test.zip file.

  1 / the project is initially placed at:

  C:\Project\Projet RIM\App\Test

  2 / after the compilation with the 'build Ant blackberry' command, the project Test.zip is generated in

  C:\Project\Projet RIM\App\Test\build

  3 / If the command to use to sign within a seoncd period must be:

  C:\BBWP>bbwp 'C:\Project\Projet RIM\App\Test\build\Test.zip' g - o mypassword
  "C:\Project\Projet RIM\AppSigned".

  4 / the output files are then

  C:\Project\Projet RIM\AppSigned

• Installation of the OTA for Storm: "907 invalid COD. "Error HTTP 404: not found.

  Installation of Storm OTA:

  -----------------------------------------------------------------------------------------------

  COD

  -----------------------------------------------------------------------------------------------

  My request 'abc' has a big .cod file and > 64 KB. I extracted and produced 6 .cod files.

  ABC. COD

  ABC - 1.cod

  ABC - 2.cod

  ABC - 3.cod

  ABC - 4.cod

  ABC - 5.cod > 64 K

  ABC - 5.cod is always larger than 64 KB

  -----------------------------------------------------------------------------------------------

  JAD

  -----------------------------------------------------------------------------------------------

  However abc.jad file has files of 7 cod enteries

  RIM-COD-URL-6: abc - 6.cod

  RIM-COD-URL-5: abc - 5.cod

  RIM-COD-URL-4: abc - 4.cod

  RIM-COD-URL-3: abc - 3.cod

  RIM-COD-URL-2: abc - 2.cod

  RIM-COD-URL-1: abc - 1.cod

  RIM-COD-URL: abc.cod

  When you download it gives me "907 invalid COD. "Error HTTP 404: not found" error.

  -----------------------------------------------------------------------------------------------

  I also tried deleting after 3 enteries of the .jad file.

  RIM-COD-URL-6:

  RIM-COD-SHA1-6:

  RIM-COD-size-6:

  But it still gives the same error.

  -----------------------------------------------------------------------------------------------

  Emergency assistance is required.

  Alhumdulillah

  Problem is solved

  Mistake I made was that I have not put the .zip file on the Web server that was originally the .cod > 64K file.

• I get an error, "CXINS.exe not found" when trying to install catia v5 Dassault.

  Original title: 123

  Unable to Dassault catia v5 Setup error: CXINS.exe not found in windows7

  Hi dinesh_922,

  Look here for the answers and troubleshooting tips.

  http://www.catiatutorialcad.com/CATIA-help/

  Depending on what version it is, my interpretation is that it is not backward compatible...

  Good luck.

• Remote VPN Error 797 (modem not found)

  I get an error 797 (modem not found) error when I try to connect to my DSL connection. It started recently and I don't know what else to try, I uninstalled the modem and reinstalled without effect.  I have Windows 7 and the only thing that has changed is an update of Windows.  Help, please.

  Hello

  Thank you for writing to Microsoft Community Forums.
  The question you have posted is related to the VPN Dialup Network and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• We get an error ' ' operating system not found "while tyring to windows 7 boot

  * Original title: only F11 can start

  I installed Windows 7 from a USB on a new ssd using F11. Now I can only access Windows by pressing F11 at startup upward. Otherwise, I get "Not found operating system". I have a Vaio S.

  Hello

  This problem may occur if one or more of the following conditions are met:

  (a) basic input/output system (BIOS) does not detect the hard drive.

  (b) the hard disk is damaged.

  (c) sector 0 of the physical disk has an incorrect or malformed master boot (MBR) record.

  Note: Some third-party programs or alteration of the disk can damage an MBR.

  (d) an incompatible partition is marked as Active.

  (e) a partition which contains the MBR is no longer active.

   

   

  Method 1:

  I suggest that you update the basic input/output system (BIOS) to the last version by contacting the motherboard or computer manufacturer, and the Coachman.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

   

  Method 2: Please follow the steps in the following article and check.

   

  Error: the OS not found or lack of operating system.

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docTypeID=DT_KNOWLEDGEARTICLES_1_1&docType=kc&externalId=C1001886

  For more information, see the link:

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

   

  If the problem persists, I suggest you to contact the Sony Support for assistance.

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=contact

  Let us know if it helps!

• Run-time error '48': file not found t2win - 32.dll

  Since I've updated my Astrocalc program I can't program to open on my desktop. I get the message: run-time error '48': file not found t2win - 32.dll.

  You have any ideas how I can fix this problem please?  I have been trawling the web for months on and outside, but had nowhere :-(

  Gill

  The file t2win - 32.dll is a Visual Basic Runtime file that should be installed by the AstroCalc program.

  Suggest you contact them and get the latest AstroCalc version that supports Windows 7.

• PhoneGap CLI: {"error": "app 2201132 not found"}

  With the help of Phonegap CLI I get error

  
  {"error":"app 2201132 not found"}

  I tried to delete the app via the web interface, but the next time I try to push the soft, it gives the same message.

  Is this reference stored somewhere and must delete?

  Seem to get a lot of weird questions today!

  A Supprimer.Cordova/config.JSON that contains the binding to the ID of the remote application. This should be treated by the CLI, I created a problem here.