Error inserting line in the w_etl_run_s table

Similar Questions

• Obtaining error APP-FND-00874: Routine FDFBDF found no line in the FND_DESCRIPTIVE_FLEXS table

  I wrote a stored procedure in our custom schema.  I have granted rights of running APPS to it.   When put in a concurrent program I get this message and it will not even start running. I'm under the it the purchase of Super user

  
  

  APP-FND-00874: Routine FDFBDF found no line in the FND_DESCRIPTIVE_FLEXS table

  
  

  So I created 2 exactly stored procedures as below but different name.  I put one in our custom schema and the other in the scheme of the APPS and I still get the same error message.

  
  

  create or replace

  PROCEDURE TESTPROCEDURE1 (errbuf OUT VARCHAR2, OUT VARCHAR2 retcode) HAVE

  BEGIN

  NULL;

  END TESTPROCEDURE1;

  Was that there was a control on behalf of the simultaneous request character and, possibly, the short name.   It was not visible until I stuck in another application.

  Thank you for all your help.

• Insert and update the nested table

  Hello
  
  I created a nested table containing the following columns. I need to insert records into the nested table. And also I have to update the nested table. Please find below my table and get error message.
  
  Please advose...!

  SQL> create type details as object(
    2  basic number(7,2),
    3  da number(6,2),
    4  hra number(6,2),
    5  pf number(6,2),
    6  it number(6,2),
    7  gross number(7,2),
    8  ded number(6,2),
    9  net number(8,2));
   10  /
  
  Type created.
  
  SQL> create type details_t is table of details;
    2  /
  
  Type created.
  
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create table emp_tab(empno number(4),name varchar2(10),details_tab details_t)
    2* nested table details_tab store as empl_details
  SQL> /
  
  Table created.
  
  
  SQL> ed
  Wrote file afiedt.buf
  
    1* insert into emp_tab values(&empno,'&name',details_t(details(&da,&hra,&pf,&it,null,null,null)))
  SQL> /
  Enter value for empno: 1
  Enter value for name: asdf
  Enter value for da: 120
  Enter value for hra: 130
  Enter value for pf: 120
  Enter value for it: 120
  old   1: insert into emp_tab values(&empno,'&name',details_t(details(&da,&hra,&pf,&it,null,null,null
  new   1: insert into emp_tab values(1,'asdf',details_t(details(120,130,120,120,null,null,null)))
  insert into emp_tab values(1,'asdf',details_t(details(120,130,120,120,null,null,null)))
                                               *
  ERROR at line 1:
  ORA-02315: incorrect number of arguments for default constructor

  Can I use '&' while inserting records in the nested table? Yes / No?
  
  I do need to update also net gross, ded, columns... !!
  
  Please help me... !!
  
  Concerning
  A

  $ sqlplus scott/tiger
  
  SQL*Plus: Release 10.2.0.2.0 - Production on Thu Apr 21 16:18:16 2011
  
  Copyright (c) 1982, 2005, Oracle.  All Rights Reserved.
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL> CREATE TYPE details AS OBJECT(
   basic NUMBER(7,2),
   da NUMBER(6,2),
   hra NUMBER(6,2),
   pf NUMBER(6,2),
   it NUMBER(6,2),
   gross NUMBER(7,2),
   ded NUMBER(6,2),
   net NUMBER(8,2));  2    3    4    5    6    7    8    9
   10  /
  
  Type created.
  
  SQL> CREATE TYPE details_t IS TABLE OF details;
    2  /
  
  Type created.
  
  SQL> CREATE TABLE emp_tab(empno NUMBER(4),name VARCHAR2(10),details_tab details_t)
   NESTED TABLE details_tab store as empl_details  2
    3  /
  
  Table created.
  
  SQL> INSERT INTO emp_tab VALUES(7001,'Saubhik',details_t(details(100,100,50,10,10,null,null,null)));
  
  1 row created.
  
  SQL> SELECT * FROM TABLE (SELECT details_tab FROM emp_tab WHERE empno=7001);
  
       BASIC         DA        HRA         PF         IT      GROSS        DED
  ---------- ---------- ---------- ---------- ---------- ---------- ----------
         NET
  ----------
         100        100         50         10         10
  
  SQL> ^C
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  UPDATE TABLE (SELECT details_tab FROM emp_tab WHERE empno=7001)
    2     emp_sal
    3*    SET emp_sal.net=emp_sal.basic+emp_sal.da+emp_sal.hra
  SQL> /
  
  1 row updated.
  
  SQL> SELECT * FRM emp_tab;
  SELECT * FRM emp_tab
           *
  ERROR at line 1:
  ORA-00923: FROM keyword not found where expected
  
  SQL> SELECT * FROM emp_tab;
  
       EMPNO NAME
  ---------- ----------
  DETAILS_TAB(BASIC, DA, HRA, PF, IT, GROSS, DED, NET)
  --------------------------------------------------------------------------------
        7001 Saubhik
  DETAILS_T(DETAILS(100, 100, 50, 10, 10, NULL, NULL, 250))
  
  SQL>
  

• When I try to automate - fusion photo I get this error - which freezes my Mac and I have to force leave to use anything - 19 error: bad argument: invalid resource format. Error on line 0, the character offset 560, in ' {alignChildren: 'fill', text: ' $$$

  Error 19: Bad argument: invalid resource format. Error on line 0, the character offset 560, in ' {}

  alignChildren: 'fill', text: ' $$$ / AdobePlugin/Shared/Photomerge/process/Name = Photomerge', orientation: 'row', alignment: "fill."

  View1: Panel

  {

  "text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/layout = layout", direction: "column", alignment: ["fill", "fill"],

  View2: Group

  {

  orientation: "column", alignment: "fill."

  _LOauto: RadioButton {text: ' $$$ / AdobePlugin/shine/Photomerge/Scr/Auto = Auto ", alignment: 'left'"},

  view4: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Automatic_87x38.png"}

  },

  view5: Group

  {

  orientation: "column", alignment: "fill."

  _LOperspective: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/Perspective = Perspective', alignment: 'left'},

  Vision7: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Perspective_87x38.png"}

  },

  view8: Group

  {

  orientation: "column", alignment: "fill."

  _LOcylindrical: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/cylindrical cylindrical = ', alignment: 'left'},

  view10: Image {image: "/Applications/Adobe%20Photoshop%20CS6/Presets/Scripts/Stack%20Scripts%20Only/P_AutoAlign _Cylindrical_87x38.png"}

  },

  view11: Group

  {

  orientation: "column", alignment: "fill."

  _LOspherical: RadioButton {text: ' $$$ / AdobePlugin/Shared/Photomerge/Scr/spherical ball = ", alignment: 'left'"},

  view13: Image {image: ' /}

  Hi Donald,.

  Sorry for the inconvenience.

  This happens usually when the script does not have enough permissions to manage this.

  Please make sure that this folder applications, and two libraries have full read and write.

  Also if it happens again, please tell me if you use Bridge for example or directly with Photoshop.

  Thank you

  Jitendra

• How to add new features to the line in the nested table advace?

  Hello

  I want to create a new line in the nested table advance.

  Help, please.

  Thank you

  Hello

  Use the code below to add a line in the nested Table.

  If (PageContext.GetParameter ("addRows")! = null) {}

  OAAdvancedTableBean sectionsTable = (OAAdvancedTableBean) webBean.findChildRecursive ("AdvTblRN");

  OAInnerDataObjectEnumerator sectionsEnum = new OAInnerDataObjectEnumerator (pageContext, sectionsTable);

  {while (sectionsEnum.hasMoreElements ())}

  Set of rows sectionsRowSet = sectionsEnum.nextElement () (set of lines);

  for (int i = 0; i)< 1;="">

  NewRow = sectionsRowSet.createRow ((OARow)) OARow;

  sectionsRowSet.insertRowAtRangeIndex (sectionsRowSet.getRowCount (), newRow);

  }

  }

  Thank you

  Dilip

• making line for the current line on the expansion table

  Hello
  
  I use JDeveloper 11.1.1.5.0
  
  I have a table with facet detailstamp enabled. Each line is to have an arrow icon to expand this line.
  
  My problem is that line expand action seem to work independently with the selection of rows in the table. When I develop a line, it does not only rank as current. I tried with the code below to make the line of the current table, but could not do.
  

      public void makeCurrentRow(RowDisclosureEvent rowDisclosureEvent) {
          usersTable = (RichTable)(rowDisclosureEvent.getSource());        //usersTable is the binding of the table on the page
          RowKeySet discloseRowKeySet = usersTable.getDisclosedRowKeys();
          usersTable.setSelectedRowKeys(discloseRowKeySet);
  
          AdfFacesContext.getCurrentInstance().addPartialTarget(usersTable);
      }

  Please let me how can know I do the table row under the current name on the expansion of this line.
  
  Kind regards
  Fox

  I implemented a sample here http://tompeez.wordpress.com/2013/04/12/make-disclosed-row-the-current-row-when-using-a-detail-facet-of-a-table/

  Timo

• view multiple lines in the advanced table

  Hi all
  
  I have a requirement. I created advancedtable. When the page loads, to display 4 rows at a time. Can anyone please help how to achieve this req
  
  Kind regards
  Murali

  Hello

  Write the code below in AM that will create 5 blank lines in the advanced table.

  xxVOImpl voImpl = getxxLineVO1();
  voImpl.setWhereClause ("1 = 2");
  voImpl.executeQuery ();
  for (int i = 1; i)<=5>
  {
  Line = voImpl.createRow ();
  voImpl.insertRow (row);
  row.setNewRowState (Row.STATUS_INITIALIZED);
  row.setAttribute ("column1", i);
  row.setAttribute ("column2", "XYZ");
  }

  Kind regards
  Mary

• Restore the value of the selected line in the editable Table.

  Hello, I use Jdeveloper 11.1.2.1.0.
  
  My problem is:
  1. Select a line in the editable table.
  2. change the value inside elements of the af:inputText of columns.
  3. tap on restore.
  4. the values of the selected line remains the same.
  
  If I select another line, before the restore, the restore will work as expected.
  
  I want to when you press the button cancel the values of the selected row to be rollback-ed as well.

  Set the immediate on all the inputTextFields in the table and it worked.

  Thank you.

• Line in the ADF Table color

  Is it possible to alternate the color of the lines of the ADF table? Do I have to use a skin?
  
  Code example would be much appreciated.
  
  Thank you, Mitch

  Read about the line of the bands here:
  http://download.Oracle.com/docs/CD/E12839_01/apirefs.1111/e12419/tagdoc/af_table.html
  Basically, you can use the rowBandingInterval attribute.

• Add lines to the slot table with apex_item.checkbox form?

  Hello
  
  I created a data manipulation process to add a line in a tabular presentation. The problem is that I have a few boxes and when I click on the button to call the procedure for adding line is not
  create one of the only text fields. Is anyway for me to create the checkboxes in this way?
  
  Thanks in advance!

  Hello

  Take a look on Re: Add a line in the detail table when the checkbox is enabled on a table of master report clone an entire line so it should include check boxes. Just make sure that ypu run updateInputs() or something similar to make sure that all the boxes have unique attributes "name".

  Andy

• Add more than 2 lines for a select statement without inserting rows in the base table

  Hi all
  
  I have a below a simple select statement that is querying a table.
  
  Select * from STUDY_SCHED_INTERVAL_TEMP
  where STUDY_KEY = 1063;
  
  but here's the situation. As you can see its return 7 ranks. But I must add
  2 rows more... with everything else, default or what exist... except the adding more than 2 lines.
  I can't insert in the base table. I want my results to end incrementing by 2 days in
  measurement_date_Taken on 01-APR-09... so big measurement_date_taken expected to
  end at study_end_Date...
  
  
  
  IS IT STILL POSSIBLE WITHOUT INSERT ROWS IN THE TABLE AND PLAYIHY ALL AROUND WITH
  THE SELECT STATEMENT?
  
  Sorry if this is confusing... I'm on 10.2.0.3
  
  Published by: S2K on August 13, 2009 14:19

  Well, I don't know if this request is as beautiful as my lawn, but seems to work even when ;)
  I used the "simplified" version, but the principle should work for your table, S2K.
  As Frank has already pointed out (and I fell on it while clunging): simply select your already existing lines and union them with the 'missing documents', you calculate the number of days that you are "missing" based on the study_end_date:

  MHO%xe> alter session set nls_date_language='AMERICAN';
  
  Sessie is gewijzigd.
  
  Verstreken: 00:00:00.01
  MHO%xe> with t as ( -- generating your data here, simplified by me due to cat and lawn
    2  select 1063 study_key
    3  ,      to_date('01-MAR-09', 'dd-mon-rr') phase_start_date
    4  ,      to_date('02-MAR-09', 'dd-mon-rr') measurement_date_taken
    5  ,      to_date('01-APR-09', 'dd-mon-rr') study_end_date
    6  from dual union all
    7  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('04-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
    8  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('09-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
    9  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('14-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   10  select 1063, to_date('03-MAR-09', 'dd-mon-rr') , to_date('19-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   11  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('23-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual union all
   12  select 1063, to_date('22-MAR-09', 'dd-mon-rr') , to_date('30-MAR-09', 'dd-mon-rr') , to_date('01-APR-09', 'dd-mon-rr') from dual
   13  ) -- actual query:
   14  select study_key
   15  ,      phase_start_date
   16  ,      measurement_date_taken
   17  ,      study_end_date
   18  from   t
   19  union all
   20  select study_key
   21  ,      phase_start_date
   22  ,      measurement_date_taken + level -- or rownum
   23  ,      study_end_date
   24  from ( select study_key
   25         ,      phase_start_date
   26         ,      measurement_date_taken
   27         ,      study_end_date
   28         ,      add_up
   29         from (
   30                select study_key
   31                ,      phase_start_date
   32                ,      measurement_date_taken
   33                ,      study_end_date
   34                ,      study_end_date - max(measurement_date_taken) over (partition by study_key
   35                                                                          order by measurement_date_taken ) add_up
   36                ,      lead(measurement_date_taken) over (partition by study_key
   37                                                          order by measurement_date_taken ) last_rec
   38                from   t
   39              )
   40         where last_rec is null
   41       )
   42  where rownum <= add_up
   43  connect by level <= add_up;
  
   STUDY_KEY PHASE_START_DATE    MEASUREMENT_DATE_TA STUDY_END_DATE
  ---------- ------------------- ------------------- -------------------
        1063 01-03-2009 00:00:00 02-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 04-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 09-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 14-03-2009 00:00:00 01-04-2009 00:00:00
        1063 03-03-2009 00:00:00 19-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 23-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 30-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 31-03-2009 00:00:00 01-04-2009 00:00:00
        1063 22-03-2009 00:00:00 01-04-2009 00:00:00 01-04-2009 00:00:00
  
  9 rijen zijn geselecteerd.
  

  Is there a simpler way (in SQL), I hope that others join, and share their ideas/example/thoughts.
  I feel that it is using more resources there.
  But I have to cut the daisies before now, they interfere my 'grass-green-ess";)

• How to display a message after inserting line in the table...

  Hello
  
  I want to display a message after inserting rows in the table as *' you have inserted a new line with success *'.
  
  
  I use the ADF button createinsert to insert the rows in table.after that I am stolen it.
  
  
  After commit I want to display message for the user.for what I need to do.
  
  
  
  
  
  Please help me.
  
  
  
  
  
  Sanchez.
  
  

  Double-click the validation button, to link Action property dialog will appear and then create a method of bean managed for the validation button.
  Then, add the following code to the method:

  public String saveButton_action() {}
  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
  Object result = operationBinding.execute ();
  Note "!" operator has been removed from the default code.
  {if (OperationBinding.GetErrors (). IsEmpty())}
  FacesContext ctx = FacesContext.getCurrentInstance ();
  FacesMessage saveMsg is new FacesMessage ("saved successfully");.
  ctx.addMessage (null, saveMsg);
  }
  Returns a null value.
  }

  Then, restore the ActionListener value.

  I hope this helps.

• How to insert multiple lines to the DB table

  I create processes in BPM Studio 10 g.
  
  I write below the code snippet to insert data in the database.
  However, it does not work.
  
  In the flow of the screen, the user can key in several rows of data. I try to add the to_char (element.purpose), but the Studio does not allow me to do.
  
  I think the code is wrong, but I don't know how to change it.
  
  ----------------code in PBL------------------------------------------------------------------------------
  for each item in BPMObject.group1
  do
  
  Insert in DBM. SOADEMO. SZ_TABLE (id, amount, purpose, result)
  values (element.id, element.amount, element.purpose, element.result)
  
  end
  
  -----------------------------------------------------------------------------------------------------------------
  
  ID, amount: decimal
  Purpose, result: String
  
  DBM: Module
  A group is under a BPMObject but not inherit a table.

  Hello

  It seems that you do not use a variable in the statement "for each.

  Right now you have:

  for each item in BPMObject.group1...

  You can add a new instance variable called 'bpmObject' which is of the type "BPMObject". You must use this variable in the job call the interactive component fills the table of the group. Then, you would change your logic to reflect this change by making it to read:

  for each item in bpmObject.group1...

  Hope this helps,
  Dan

• Insert select on the same table: possible without side effects?

  I have a very large table T1 containing millions of records. I need to treat its lines and create a few new lines based on selection.

  Table T1 contains events and one of them, with the code 100, is created by the further development of other events inside the table.

  My code is as follows:

  insert /*+append */ into T1 (code,...) values (100, c1,c2,...)
  select c1,c2... from T1 where (code=20 or code=10) and <other conditions>...
  
  

  as you can see I'm extract T1 lines to insert again in T1 with a different code and I use the direct path in order to get good performance.

  My fear is: choose is made from the same table I risk data loss? In general it is a good practice? Or is it better to create another table?

  Hello

  No I don't think that there may be loss of data. But that may depend on the behavior of the application and your where clause.

  I will explain how it is treated, so you can see if it's ok:

  1. the table is locked because of the insert add, (as)

  2 lines are read by select and make compatible from the State that was at the beginning of the query - 1.

  3 rows are inserted at the end, after the high-water line

  4 columns for new lines are sorted to be merged in the index

  5. high watermark is adjusted - visible new lines and lock is released

  Note that 2. and 3. occur at the same time: rows are inserted all read.

  Note that anyone can choose in the table during the operation - they see the changes committed only - if the State 1.

  all other DML are waiting for the lock being released, and will see new ranks and then

  If you have things that prevent the direct-path insert, append the hint will be ignored. So, if you must rely on close to 1. then the best lock explicitly with table lock. But I don't think that you need.

  Kind regards

  Franck.

• Submitting a form by creating multiple lines in the DB table

  Hi all

  I created a new Apex application and have created a table with columns - USER_ID, ADDRESS, TELEPHONE, CREATEDON etc.

  I want to read the USER_ID of the user and complete this field on the form and fill in the CREATEDON field with the date system. These two fields are hidden on the form.

  Now, when the user fills his address and phone on the form and click on send, 3 identical rows are inserted into the DB table. The values of user and date system are set correctly.

  To set the UserID field, I inserted a $APP_USER. in the default value of the form section. I am not able to understand why the Apex is to insert several lines even when you click the submit button once.

  Help, please.

  The problem is solved now. I noticed that add default values for the form fields added process duplicate. That's why the form has been processed three times. Remove the additional process solved the problem.