Error JPEG #53 when starting Windows Vista

Similar Questions

• Error when starting Windows Vista

  "This application has failed to start because BHO.". DLL was not found. Reinstalling the application may fix this problem.

  and

  "IE3SH Application has stopped working properly. Windows will close the program and notify you if a solution is available. »

  and

  When you open a tab in Windows Explorer I get a "Script error, do you want to keep running the script, yes or no?"

  Hi Buster12345,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. you get script errors in Explorer Windows or internet explore?

  It is possible that some third-party programs installed on the computer causes the error at startup.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  See the Microsoft article below as well as try the steps mentioned if you are referring to internet explore.

  How to resolve script errors in Internet Explorer on Windows computers

  http://support.Microsoft.com/kb/308260

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when starting Windows Vista and recovery system, 0xc00000f

  When I restarted my laptop, Windows Error Recovery appeared.

  None of these options (for example, Safe Mode) worked to solve the problem.

  The next page (Windows Boot Manager) appeared subsequently.

  Message from windows:

  Windows could not start. A recent hardware or software change might be the cause.

  File: \Windows|system32\config\system

  Status: 0xc00000f

  Info: Windows could not load because the system registry file is missing or corrupt.

  I tried to recover my windows using Recovery DVD of ASUS N2034 V1.0 15G3560310C0, but facing the error in the middle of the recovery process. I chose Windows recovery on partition 1 of the HD, because I don't want to lose my data in another partition. Message from Windows:

  Cannot open the WIM file

  Big red error message

  Hello

  1. who is the manufacturer of your computer?

  2 were there any hardware or software changes made on the computer before this problem?

  Try to start the computer in recovery options and then make a form of system restore it and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Need to do a fresh install, it would be useful to know what was last removed or installed before this started.

  It will be useful.

• Error code 0x8007001F when reinstalling Windows Vista

  Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

  Please can I just get a new clean copy of vista?

  Well I try to perform a restore of the system since the restore disc, that I got with my PC 4 years and it copies the files and broadens their and then I get the 0x8007001F error code and he said: he can't complete the installation.

  Please can I just get a new clean copy of vista?

  Hey becci1978

  you don't say why you were reinstall vista

  You may have a hardware problem with your computer that causes the error

  I suggest you contact your computer manufacturer for assistance with the help of their recovery methods

  Walter, the time zone traveller

• I can't start windows Vista, I get this message: Loadkey failed with error 1016

  Hello. I can't start windows Vista in all configurations. I get this message: Loadkey failed with error 1016 (sthive = 0).
  I get the same message when I try normal or safe modes. The mouse and keyboard do not work. I have
  don't know what to do next. Any suggestion would be appreciated. Victor

  Hello and thanks for your reply. The problem has been fixed. I'm not exactly sure how, but that's what happened. When I'm at a screen that says "repair windows" the cursor would not move to click on proceed. When I had almost gave up and was will wipe the hard drivbe and do a clean installation of "Windows 7", I turned on the computer and got to repair screen and the cursor was somehow operable. I clicked on continue and the computer fixed itself and has been running as good as new since. The computer is 'HP' office and running "Vista".
  Thank you and this problem is solved. Victor1244

• When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?

  Original title: Msimbz32.dll

  Hello

  When my windows (Vista) starts coming, he said: "Msimbz32.dll is missing". What should I do?
  Best wishes
  Hassan

  Hello
  Try the methods provided below and check if the problem persists.

  Method 1:

  Msimg32.dllis a file system in Windows Vista

  If you get the message when you open any program or when you start suggests that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Perform the clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the above article.

• Cannot start windows vista: bugcheck 9f

  Title: bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648

  my laptop crashed and closed, and I don't know what to do. can someone help me please.
  yesterday when I turned off my laptop it's ok.but today when I pressed the power button, it started normally
  He showed only two options:
  'launch start up repair (recommended)' or 'start windows normally '. Startup Repair cannot fix the problem and start windows normally does not work, it remains just on page load for hours.
  the problem is bugcheck 9f, parameters = 0x3, 0xaf5fc030, 0xaf5fc030, 0x84e6c648
  I really need my computer soon, and I do not have the windows cd .i don't really know what to do someone help me please

  Hi Ak_609,

  1. Did you the latest changes on the computer?
  2. When you receive the error message from error checking?

  First unplug all external devices (except keyboard and mouse) and then try to boot to the desktop and let us know the status.

  Method 1

  Check if the computer starts in safe mode and after back with the results.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If the computer starts in safe mode then I would suggest you to perform control and clean boot if it helps.

  It is possible that some third-party programs installed on the computer is at the origin of the problem in normal mode.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• I get an error message (80070005) when download windows updates.

  I get an error message (80070005) when download windows updates. This laptop is only 6 months old. I tried everything I know to do. Please help if anyone know what I should do to fix this problem.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error code 80070490 when installing Windows updates.

  I GET THE ERROR 80070490 CODE WHEN THE WINDOWS UPDATE IS RUN.
  CAN A HELP ON THIS?
  I READ THE ANSWERS TO MOST OF THE SIMILAR COMMENTS, WITHOUT SUCCESS.
  Thank you
  AMEER

  Finally, I erased the disc & reinstalled the operating system.  The loss of some data, but the problem is finally resolved.  The ONLY solution I could find that actually worked!

• Updates KB2533523 and KB2468871 cannot install and I got the error code 643 on my windows vista computer.

  Help! How can I get those blasted things to install?

  Hello

  Follow the step and check if that helps.

  Method 1: you receive error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates

  http://support.Microsoft.com/kb/976982

  Method 2:When, that you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive a Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  Method 3: you receive error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

  Method 4:Try download and install the update

  http://www.Microsoft.com/download/en/default.aspx

• Error lanacfg utility using the Windows Vista system

  Hi, I have an error using lanacfg.exe on Windows Vista Home Premium system utility.

  Whenever I try to change the LANA number, I have an error as shown below:

  > lanacfg setlananumber 1-0
  Lana has changed.
  Error 80070005

  And after that this error LANA number is not changed in fact.
  That worked very well under Windows XP. The problem appears only on Vista.

  I appreciate any help or comment on that.

  Thank you.

  Akhr salvation,

  The same thing happened to me. What I did to connect to the computer with an account having local administrator rights. I copied the file lanacg to the root of C:. I ran it again and it worked so well.

  Laura

• Cannot start windows Vista in safe mode.

  I followed these instructions to start Windows 7 in safe mode:

  I tried to start windows vista in safe mode by using the following:

  1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
  2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
  3. Choose "restart".
  4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
  5. Restart the computer in normal mode.
  6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
  7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

  Can you tell me what I am doing wrong?

  You tap f8.

  You can have a F-Lock key in the upper right corner of your keyboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the other way at the link above.

  Table of contents > Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I remove DLL run error messages when I start windows vista

  C:\users\karen\vloadB6.dll and

  C:\users\karen\Appdata\roamimg\MICROS~1\windows\STARTM~1\programs\startup\SCANPD~1.dll

  Suffice to say that the specified module could not be found.

  whatdoes the eman, what do these messages and how to delete results?

  Thank you

  Hello

  "vloadB6.dll" is Malware.

  You Antivirus can be removed but left a start for her entry.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If the problem persists after that, remove them starting.

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Error 0 x 80070005 when installing Windows Vista service pack.

  Cannot install service packs on vista ultimate. have tried since 3/2009

  Here is the accesscheck running of generated text

  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  This problem may be caused by third-party security programs such as firewalls and antivirus software.

  "Please follow these instructions if you are experiencing this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads "

  My notes - TaurArian [MVP] 2005-2011 - Update Services

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller