I can't start windows Vista, I get this message: Loadkey failed with error 1016

Similar Questions

• I put a new hard drive in my laptop and when I installed Windows Vista I get this message: "windows cannot configure windows to run on this hardware of computers."

  I put a new hard drive in my laptop and when I install Vista I get this message: "windows cannot configure windows to run on this hardware of computers."  I can't install an oem on a new hard drive version?  This is the portable original in all other respects.

  original title: new hard drive and vista

  Hello

  strange that you can request that

  HP computers have been known to not let you install Vista on a non HP bought replacement hard drive

  There were a few posters with this problem here

  If the OEM disc for this particular laptop, you should be able to reinstall it as many times as you want as long as you have not changed the main material (the motherboard)

  You can change the hard drives, RAM, etc.

  I presume that you boot from the Vista DVD

• I can not properly install an update called (internet explorer 8 for windows vista) I get this message (Setup cannot continue because a newer version of internet explore was detected on this computer)

  Ideas:

  • I had problems with google before but everything was OK after uninstalling all programs of google
  • Error messages like end of google, but that was before
  • I change web browser safari because some time cannot open internet explore it, but so far, I get the message this new update available that it's the same update with the same problems that cannot install
  • I use windows vista business 32-bit

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  All,
  I suggest that you run repair the automated for: reset Windows Update components and then after restarting your computer, run Windows update and see if it is available again.  Also, you should look through this article as well: Troubleshooting Windows Update: updated proposed repeatedly.

  Let us know the results.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start my computer, I get this message: fm3032.exe. application error fail to initialize and it is not allowing me to open the files on my desktop or access the system restore? My OS is XP

  My operating system is windows xp

  http://www.file.NET/process/fm3032.exe.html

  Read this thread and see if you have list them installed programs.

  Also, follow these steps:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  Post back with the results of the analyses and also answer the following questions:

  brand and model of the pc

  current antivirus

  What service pack?

• I use a dongle for my internet but suddenly I can't connect. "" When I run windows diagnostics I get this message "not set up to establish a connection on the port.

  Internet connection problem

  I use a dongle for my internet but suddenly I can't connect. When I run windows Diagnostics I get this message... "www.microsoft.com"is not configured to establish a connection on port "service world wide web (HTTP)" with this computer. Can anyone help please?

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1: Try to start your system in safe mode with network and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3: Of connection problems in Windows wireless and wired network:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this information is useful.

• When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  Hello

  -Remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   

  Step 2:

  If the computer starts in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

  Step 3:

  If you haven't already done so, I would say doing a full scan on your system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

  while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

  Hello

  ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

  Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

  See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

  Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

• I'm having a problem of publishing in muse. I get this message: an unknown authentication error occurred to you using adobe ID (shared_uknown_error). can anyone help? Thank you

  I'm having a problem of publishing in muse. I get this message: an unknown authentication error occurred to you using adobe ID (shared_uknown_error). can anyone help? Thank you

  Hello

  As we found during the chat session, your creative application Cloud wasn't so far because of what server Muse and British Colombia were not getting synchronized.

  Concerning

  Vivek

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

• Failed to start. Screen with black error "Loadkey failed with error 1450" when starting.

  Original title: Loadkey failed with error 1450

  Windows Vista does not load on HP Pavilion. Is just a black screen and Loadkey failed with error 1450. What is the solution?

  Hello

  1. Since when are you facing the issue?

  2. what exactly do you mean when you say that Windows Vista will load not Hp Pavilion?

  3 are you referring to the built-in software or you are facing problems of not being able to boot to the desktop?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for more information about the System File Checker analysis

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest you to download and install the latest drivers from the manufacturer's Web site.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or you can also use the link provided:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Hope this helps and provide us more information if you need more assistance.

• Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Try to install adobe reader & I continue to get this message... Error 1606. Could access the location %APPDATA%\ network what do I do?

  Check the registry values listed in the present statutes are suitable:

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

  If this does not resolve the problem, create a new administrator account and use it to do the installation.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget

  After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X. I bought it originally, but do not know were my installers are. Can I get a new installer?

  1st, CS5 is 4 + years old so you MAY have problems with the latest Apple operating system

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  - and a Java update https://forums.adobe.com/thread/1507936

  -Update may break things https://forums.adobe.com/thread/1772260

  2nd, try previous versions http://www.adobe.com/downloads/other-downloads.html

• I'm trying to update Adobe encoder CC (2015). Whenever I try to update the application, I get this message: update failed. There was an error of installation of this update. Try again later or contact customer support (U44M1p34). I have no idea what to do

  Whenever I try to update the application, I get this message: update failed. There was an error of installation of this update. Try again later or contact customer support (U44M1p34). I don't know what to do to solve this problem and update of my application.

  Cannot install updates of Creative Cloud

• Errorloading C:\WINDOWS\agodulof.dll__I get this message whenever I start my PC. I find no research of this type of error.

  Errorloading C:\WINDOWS\agodulof.dll
  I get this message whenever I start my PC. I find no research of this type of error. Any help would be greatly appreciated.

  30pt,
  Thanks for posting in the Microsoft answers Forum.  Well, you aren't the only one who came empty looking for this error.  I suggest that you perform a clean boot to determine what program is trying to call this dll.

  Follow the steps in this article to resolve problems with a clean boot.

  Advanced problem resolution by clean restart.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.