Error keyboard satellite 4090 xcdt

I installed winxp home on mij satellite, it works (slow but works).
Since a few days I had problems with keyboard mij.
When I press left SHIFT I get Windows XP help screen. The left alt is given too many strange things.
So I can not use capitals because the right pass to give me the office.
The keyboard is messed up, I reinstalled Windows XP. Formatting the hd but no use. When you enter the name of the installation, I got the same problem.

What is this possible?

Hello

try using the original recovery CD. Install the original software (Win 98 I guess) and check if it still the same. If Yes, then I guess you have a problem with your keyboard or keyboard. If this isn't the case, then I'm completely lost.
Try attaching an external keyboard and check if the problem is still there.

Good luck!
Tom

Tags: Toshiba

Similar Questions

  • Replacement of hard training for Satellite 4090 XCDT

    I have a Satellite 4090 XCDT, who needs a new hard drive, I'll try to find out if the computer/laptop BIOS can support a 20 GB hard drive (Toshiba Mk-2018GAS), can someone help me?

    Also until the size will it bear?

    Hi Steve

    I can't give you specific information about 20 GB of HARD drive, but I know that 8 GB of HARD drive will be recognized by the BIOS and it will not work properly. One of my friends has 4100XCDT and it works with 20 GB HARD drive with no problems.

    My opinion is that you should take some information from partners of service or Google around and I'm sure you can find HARD drive provider that can give you good information. I know that it is possible to built in the HARD drives to high capacity for older machines, but how exactly I can not explain.

  • Caps lock error & keyboard - Satellite L50-A-1F2

    Hello world!

    Can someone help me solve these problems with the SHIFT key?

    * 1st problem: *.
    The led on the key caps in my Toshiba Satellite L50-A-1F2 is always on.

    * 2nd problem: *.
    I did some tests using MS Word:
    When caps lock shift is not active, I can write without problem.
    When shift caps lock is enabled, I have problems with some keys (all in the same "column"): 3, D, E, C.
    When I press on:
    3: I get the symbol ' - '.
    D: the cursor moves to the line below
    E: I get the symbols TM; Sometimes it activates Intel graphics deal
    C: the cursor moves to the beginning of the first line.

    Thank you in advance for help you!

    Usually the CAPS LOCK key can be turned on and off by pressing the same button once more.
    If this isn't possible, I'm afraid that this could be a hardware problem m.

    But new Toshiba notebook s supports the special feature called the special function mode key.
    This mode allows you to use the FN keys without pressing the FN key extra.

    I put t know if this mode may affect the functionality of the CAPS LOCK, but its worth a check.

    However, I would recommend you to connect external keyboard and check if the same problems of CAPS LOCK would appear. In case the external USB keyboard would work correctly, the problem of LOCKING of UPPER is related to malfunction internal keyboard.

  • Satellite 4090 XCDT - upgrade RAM

    Hi all
    can someone tell me what kind of RAM I should get to upgrade my 64 MB? I am not a technician, but I hope someone can help.

    Who are waiting to hear from you.
    AGM

    Hello

    You can upgrade your 4090 Satellite up to 192 MB of RAM.
    At http://www.toshiba-europe.com/bv/computers/products/notebooks/satellite4090/product.shtm you'll find options all upgrade possibilities!

    The order number for a 128 MB RAM module is PAPA2062U
    This module can be ordered for each partner to Service Toshiba.
    Sammy

  • Satellite 4090 XCDT and display on LCD screen area

    I recently bought the laptop above, running a Celeron 400, with 128 MB of ram and a 4.3 GB HARD drive. It has a 14 "screen. But when I installed windows XP Pro on this laptop when it boots into windows the visible area current decreases to approximately 12 ". It has a bios update to correct... ?

    When I go into Device Manager it shows 2 monitors, the default and the flat screen Toshiba 1024 * 768. I tried to remove the value by default, but in vain.
    It be possible to have windows running in a screen size... ?
    And if so HOW...?
    Any ideas would be most appreciated.

    Hello

    Your camera has video Trident Microsystems Cyber 9525 card. Try to find a good driver on the manufacturer's download site.

    Let me know if it works.

    Good luck!

  • Need to keyboard for Satellite 4080 XCDT

    Hello

    on my keyboard the Butts left (TAB, q, a, y, CAPS) are defects. But if I press "- a" a "L" will appear on the screen, so I think that the buttons are broken, maybe a chip in the keyboard or laptop.

    I want to buy a new keyboard, where can I get a cheap?
    Keyboards (from which Toshiba-modells) climb too in my book? (for ebay search ;-))

    Satellite 4080 XCDT

    Thanks in advance

    Biber

    HY Biber,
    Part number for your KB is P000256660

    BR,
    Stiv

  • Satellite 4100 XCDT, memory upgrade

    My friend has a Satellite 4100 XCDT with 64 MB of ram installed. He would like to wear this if possible.
    1. where is the memory? It's under the keyboard?
    2. What is the maximum that this laptop will work?

    Kind regards.

    My Info is: 192 MB of memory maximum capacity.

    Good bye

  • Lost my Satellite 4090 CDS recovery CD

    Hi all,

    I have a purchased a former used Satellite 4090 CDS, but unfortunately without a recovery CD and the OS.

    Does anyone know which OS is on recovery and where I could get a new one?

    Antoni Bye

    Hi Antoni,

    It's bad, but here's a FAQ to solve your problem.

    FAQ is a list of laptops with their OS Recovery CD supplied.
    Reach

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/faq_selection.jsp?

    and choose the FAQ with the following title:
    "What operating system and recovery media came with my Toshiba Satellite Notebook PC?"

    If you want to order a new recovery CD, you must go to a Service partner and write a solemn declaration
    with some general information about your machine. Then, you can order a!

    On the following site is a list of all Service partners
    under Support & downloads - Find Service partner

    http://EU.computers.Toshiba-Europe.com

    I hope this will help you!

    Rudi

  • 4090 XCDT - Boot by disc

    Hello

    I own a 4090 XCDT with Win2K.
    The win32k.sys file on the HARD disk is damaged. If Win does not, in any case.
    On the HARD drive, I have a copy of all the files system victory. So normally I will just copy my win32k.sys to its original place.

    Problem:
    My 4090 does not start from floppy or the CD. Only the start of the HARD drive - so I can't access all files on the HARD drive.
    When I remove the HARD drive and then the computer boots from floppy. My Toshiba utility-disc is without an operating system, so I can't start with them.

    Is there any solution that I can boot up my system disk with INSTALLED HARD disk?

    Thanks a lot for any suspicion.

    Greetings
    Michael

    Hello

    If you want to start the unit by using the startup disk, please change the boot priority in the BIOS settings. When starting press ESC button and hold the button. On this way, you will be able to enter the BIOS settings.

  • Cannot start my satellite 4060 XCDT mode standby

    I can't start my satellite 4060 XCDT from sleep, from his sleep, I have to reboot for it to restart, sometimes, he'll leave the day before, but mostly he used, I tried updating the BIOS, nothing works!

    Hello
    often there is a problem with installed programs that Don t 'like' Mode standby or Hibernate.

    This could be for example downloadable, firewalls, Systemchecking programs.

    What additional hardware. Do you have the connected equipment that Don t supports sleep mode, such as PCMCIA cards for example?

    Good bye

  • Question of installation disk hard satellite 4090

    I received a Satellite 4090, but there is no hard drive. Can someone tell me how to adapt it. I don't see anywhere on slot, so I guess that the case should be opened. Also are the same all drives hard toshiba.

    I've seen a lot on ebay, but they don't say what model they are intended.

    Hopeful Alan

    Toshiba Satellite 4030, 4060, 4080, 4090, 4100 series

    1. remove all cables.
    2 lower the cell next door.
    3. the HARD drive compartment on the side front right / laptop
    4. remove the 2 screws of the HDD bay cover and remove the cover.
    5 remove the 1 screw that secures the HARD drive in place.
    6. gently slide the HARD drive out of the compartment.
    7. slide the new hard drive into the hard drive compartment and replace the 1 screws to secure the HARD drive.
    8 replace the Bay covers and 2 step 4 HARD drive screws.
    9. replace all cables.

    Hope this helps, you can also try here for a disk hard http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=EU&highlightOption=15528&PR ODUCT_ID 5685 = & DISC_MODEL = 0 & tab = 1

    It might be better to get an external hard drive possible hard drives only I could find for this model were only 6.4 GB so you will not be able to upgrade to a larger h/d coz your laptop do not recognize, all if someone else might be able to answer this question better than me Good luck

  • Windows Vista RC1 keyboard & Satellite A100-225

    Hi I have a new laptop Toshiba Satellite Pro A100-225 and as a
    journalist, I obviously do a lot of typing. I'm really very reasonable
    typist with a typing speed of up to 60 words per minute with a quite small
    error rate. In any case I found that when using this system with Windows
    Vista RC1 2600 and typing of reports and so on, only the cursor will often
    inexplicably jump to random page parts - such as for example I can be typing one
    sentence and towards the middle of it, the cursor will jump on the
    the third - or second previous line, or he can jump just at the beginning of the
    first line, or the beginning of the line, I type, or even just to
    at the beginning, or way (or indeed any random point) of the word that I'm
    If you type at the time. (I've only really tested in Windows Mail and)
    Internet Explorer in the forum messages so far - as I still have Windows XP
    installed where I do most of my hits to my work. (Windows XP only)
    shows this fault of all BTW, who would be pretty much eliminate
    any type of hardware failure).

    I also tried a number of other USB keyboards that I plugged in this
    System (3 in total) and they all had more or less similar errors. Some even
    print numbers and symbols in the place where the letters and characters should
    be, despite the fact that my bar of page layout and the language of the keyboard is certainly
    100% (triple checked) updated British English UK.

    Now I am really very worried that late in the day will not be
    possible to fix it in time before Vista gold is released-
    especially since I planned to buy it soon.

    I bought this laptop because he had a "Vista Ready" label on this subject.

    Hello

    This laptop has been delivered not with Windows Vista and anyway; Windows Vista is not official on the market. There is only a BETA version.
    Beta versions of the OS usually include most small bugs. As a result, Microsoft offers Beta version only for the test.

    I think that if you finally get one version of the Vista operating system, all bugs will be fixed. I recommend using the Xp at this time. Sorry, I can see t any other solution.

  • Replacement of keyboard satellite A10

    Can someone tell me how to reach, and where to find out how, remove and replace the keyboard on my Satellite pro A10?
    Thanks in advance

    Hello Jim

    There is no public document with precise description. I put t know how old is your device, but please be careful with the guarantee.

    In any case if you want to swap the keyboard, you must remove the plastic part on the back of the keyboard. Be careful, how you do it. If the plastic part is removed, you can see the screw that the difficulty of the keyboard. Removing the work is already done. The last thing is to disconnect the keyboard.

    As I said to be careful and I hope that you will not damage a few other components.

    Good luck!

  • Backlit keyboard Satellite A660-12th

    Hello

    I have a Toshiba Satellite A660 - 12th Debian Squeeze rocking in dual boot with Windows 7, and I recently acquired a backlit keyboard.

    The problem is that the keyboard does not, either in Windows or Linux. Now, I know it works, because I tested it with a battery. So I think that the problem is in the BIOS, and probably, he is not recognized. (I have all the options related to the keyboard in my bios (BIOS 2.30 running))

    I appreciate your help and waiting for you! Thank you!

    Linux is not supported and there is no solution for m but I was wondering why you can't use it with Windows.
    Are you using the original Win7 version you got with your laptop or your own installation of the OS?

  • Satellite 4100 Xcdt: upgrade for DVD player CD player

    I want to improve my cd rom to a dvd cdwr drive what we're going to adapt my laptop 4100 xcdt

    Hello

    I found only a compatible DVD - rom dive for a Satellite 4100 xdvd
    The reader has this part number: P000263010

    You can try to google for this part number find the drive.

Maybe you are looking for

  • How to completely uninstall Garageband?

    I just upgraded to Sierra and was to have a look on the segmentation of storage when I discovered that GarageBand was 2.46 GB, even if I deleted it the day I got my MacBook Pro and never even open. How can I recover this storage space?

  • Simple serial using RS232 communication

    Hello I did some research on how to read and write with the serial RS232 port. The only example I found was a test program that is really involved. All I do is pass 7 bits of information that are going through a digital communication kit then read th

  • Help with LM358 op amp circuit

    I'm simulating a circuit using LM358N op amp to amplify the signal of the IC NE555P timer and then this signal amplified to switch the LED by a transistor switch. In theory, I think that when the key switch is off, there must be no signal no signal g

  • Cannot download KB980856

    Hi, I am trying to download KB980856, but when following the link https://support.microsoft.com/en-gb/kb/980856 It is not available? Please advise, Thank you

  • Unable to connect to the site of wildtangent games

    KServer questions? After several weeks on the site of WildTangent Games, I am now unable to connect.  I tried several times to the direction of their support staff with passwords provided by them.  Now they say the problem is most likely an error in