Question of installation disk hard satellite 4090

I received a Satellite 4090, but there is no hard drive. Can someone tell me how to adapt it. I don't see anywhere on slot, so I guess that the case should be opened. Also are the same all drives hard toshiba.

I've seen a lot on ebay, but they don't say what model they are intended.

Hopeful Alan

Toshiba Satellite 4030, 4060, 4080, 4090, 4100 series

1. remove all cables.
2 lower the cell next door.
3. the HARD drive compartment on the side front right / laptop
4. remove the 2 screws of the HDD bay cover and remove the cover.
5 remove the 1 screw that secures the HARD drive in place.
6. gently slide the HARD drive out of the compartment.
7. slide the new hard drive into the hard drive compartment and replace the 1 screws to secure the HARD drive.
8 replace the Bay covers and 2 step 4 HARD drive screws.
9. replace all cables.

Hope this helps, you can also try here for a disk hard http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=EU&highlightOption=15528&PR ODUCT_ID 5685 = & DISC_MODEL = 0 & tab = 1

It might be better to get an external hard drive possible hard drives only I could find for this model were only 6.4 GB so you will not be able to upgrade to a larger h/d coz your laptop do not recognize, all if someone else might be able to answer this question better than me Good luck

Tags: Toshiba

Similar Questions

  • Question upgrade L50-A-19N disk HARD satellite

    Hello

    I want to upgrade the standard HDD HGST to a faster SSHD Seagate, and the problem is that in this model L50-A-19N without HARD drive cover, at the bottom of the laptop everything must be removed as in this link: [video | http://www.youtube.com/watch?v=IG0lW7t92bI]

    My question is can I put the disc by myself, and if not what can I do to replace the disc without losing the warranty. I have read the manual for this model and there is nothing of HDD upgrades here.

    Kind regards.

    > My question is can I put the disc by myself, and if not what can I do to replace the disc without losing the warranty.

    No, I don't think that the HARD drive is the user extensible because _in this boite_ the laptop computer full cover must be removed to replace the HARD drive.

    It looks like the ROM modules can be updated by the user of the laptop. Other parts must be replaced by an approved engineer to keep the warranty valid.

  • Password disk HARD Satellite 5100

    I have a 5100 satellite which, once I try to boot it hangs on the Red toshiba screen and the small blue window in the front shows HDDPassword = I never set a password for it. I tried unplugging all sources of energy but not yet transmitting suggestions?

    Hello

    If there is really a game of HARD drive password, this is very bad, because there is no way to remove it.

    But maybe it's just some sort of failure. Try to reinstall the system or access the HARD drive from another computer.

    Good bye

  • Re: Disk hard Satellite P200D-139 upgrading?

    Hello world

    I recently got an opportunity * Satellite P200D-139 * PSPBNE-004003KS as a gift, it currently has a 80 GB hard drive, but I would like to upgrade to a larger. I searched on the net and forums, etc., but still quite confused.

    can I switch to a larger HARD drive? and what is the maximum size that I can go to so...

    Does anyone know also the best place for such an article...

    Thank you very much!

    Martin

    Hello

    I don't know much Equium series, but I guess that's the sata (sata interface) controller. SATA interface, there is no limit of ability so up to 500 GB (even more) should be recognized correctly. The only thing is that BIOS should also support it.

  • Installation disk hard second - "Uninitialized" says and will not let me format

    In disk management, I see my new drive hard second 1 TB.  It recognizes the 931,51 Go drive, unallocated.  When I walk through the process to configure a partition and format, I get the following error message:
    "The operation cannot be performed because the disk is not initialized."

    I must have missed a step, but reading that I did it is not clear to me what I missed.  Help?

    Thanks in advance.  Branden

    Figured it out.  The player appeared in the red list a small arrow down through the disc.  By right clicking on the arrow pointing down, they gave me the option to "initialize disk".  Now am going forward with the formatting process.  Confused, but hope someone saves some time.

  • I get an error "the disk hard virtual parent is in a saved state. Discard the saved state or stop the virtual machine and try again. "during the installation of XP mode.

    I have Win7 Pro SP1 x 64.  I downloaded WindowsXPMode_en - us.exe (from Microsoft downloads) and run it.  The installation seems to work OK (I've specified a different location for the parent virtual hard disk file).  Then, installation happening and I provide the information requested (name of user and password for the XP Mode), updates Windows and OK to the issue of sharing.  The installation program then reports the following error:

    The disk hard virtual parent is in a saved state.  Discard the saved state or stop the virtual machine and try again.

    I get the error even if I try manually configure XP Mode (use the Setup Wizard).  I downloaded the installer XPMode (3 times) and reinstalled several times, always with the same result.  If it helps, I can't locate anywhere .vsv file.

    Any idea what's going on?

    Original title: XP Mode Setup error

    Hi smithnr10,

     

     

    You must post your question in the TechNet forums because it caters to an audience of it professionals.

    To do this, you must consult the link-

    http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

     

    Hope this helps!

  • Replacement of hard training for Satellite 4090 XCDT

    I have a Satellite 4090 XCDT, who needs a new hard drive, I'll try to find out if the computer/laptop BIOS can support a 20 GB hard drive (Toshiba Mk-2018GAS), can someone help me?

    Also until the size will it bear?

    Hi Steve

    I can't give you specific information about 20 GB of HARD drive, but I know that 8 GB of HARD drive will be recognized by the BIOS and it will not work properly. One of my friends has 4100XCDT and it works with 20 GB HARD drive with no problems.

    My opinion is that you should take some information from partners of service or Google around and I'm sure you can find HARD drive provider that can give you good information. I know that it is possible to built in the HARD drives to high capacity for older machines, but how exactly I can not explain.

  • Satellite Pro L20 - disk hard keeps spinning down

    Hi, I have recently updated the BIOS on my Toshiba Satellite Pro L20, and I noticed that the disk hard keeps spinning down after about a minute, even while typing or surfing on the internet. I checked the power settings Windows XP and have it put on the desk, with the time 'Disable hard drive' set to 5 minutes when it is plugged and 5 minutes on battery (I always use on the same network). I checked the BIOS settings to see if there is something listed there, but there are no settings for hard disk power management in the BIOS.

    Although the turning down of the hard disk does not affect performance, I fear that it may be to focus on rising constant power drive / descent.
    The new version of BIOS is 25 April 06 Windows Bios Update for Satellite L20 (PSL2X), Satellite Pro L20 (PSL2Y) and Equium L20 (PSL2Z)', or a file 2, 20 - WIN.

    I think that it s nothing unusual that the HARD drive keeps spinning down applies none or BONES need the HARD disk activity.
    In addition, the turning down of the HARD drive has no effect from the bottom on the performance of the HARD disk or over the life of the HARD drive.

  • After RAM upgrade disk HARD is not visible on Satellite A660 - 11M

    I have the Toshiba Satellite A660 - 11M.

    When I upgrade the RAM to 2 GB 2 Six gaeremynck Bios can't see the drive on Start menu please help

    And when you use original RAM modules only disk HARD visible again?

  • Satellite A200-1AE cannot find my disk hard flash

    Hi to everyone.

    I have a SATELLITE A200 1AE and I have a little problem...
    My phone cannot find my disk hard flash. I contact toshiba here in Greece, and they told me that they don't know what to do!

    Can you help me please?

    THANKS ANYWAYYYY

    Hello

    Can you please write a little bit more kill your issue? Since when you noticed this problem? What did you do last time? Maybe installed WXP and now the HARD drive is not visible for the BIOS or does not appear when you use F12 at startup?

    Please write a little more. I don't think that the service can't do anything.

  • Satellite A50 543: Questions about upgrading the HARD drive

    I'm looking to upgrade the internal hard disk on my A50 543 to 100 GB at 7200 RPM. The original drive is a Fujitsu 60GM 4200. I have found no information on the Internet on other readers line CMS that have been tested and found compatible with the A50. I need at least 5400 RPM or 7200 RPM to edit video.

    Suppliers meet usually only with so many laptops on the market, they cannot test each hard drive with any laptop, but can tell if it is compatible with the specifications of the computer and the hard disk specifications and are so confident that their information is accurate that they offer a money back guarantee (excluding shipping costs)

    My question is
    (1) how can I be sure that the drive will work (considering the high international shipping costs) to 100%?

    (2) none of the contributors to this forum may recommend a hard drive internal 5400 RPM or more it has installed on the same model specification?

    Thank you. You are my last hope

    Best regards
    Vince

    Hello

    If you want to be 100% sure that works on your HARD drive, so I think the best way is to contact the after-sales Service of Toshiba partner. Here, you can order all the devices and parts compatible and supported.
    I also found these Toshiba hard disks that must be compatible:
    HDD2187B 20 GB 4 200
    HDD2190B 40 GB 4 200
    HDD2193 40 GB 5 400
    HDD2189B 60 GB 4 200
    HDD2194 60 GB 5 400
    HDD2188B 80 GB 4 200
    80 GB 5 400 HDD2191

    In this case, you can use a disk HARD of GB 5 400 80 but I put t found no information about 100 GB of HARD drive.

  • Question about Dell OEM: SLP Windows 7 Installation disk domestic; can it be installed and activated on other computers from Dell?

    I bought a Dell installation disk and I want to use it to install a better version of Windows on my Dell PC. I have windows Vista and I want to use it to update my OS Windows7 Home Premium. However, the license type is SLP:OEM and no detail... not sure what SLP: OEM means... I thought that the OS discs are the same. Someone told me no retail editions are not suitable for a new OS, but I'm confused. The disc says, Windows 7 Home premium 64-bit, but didn't holograms who have all MS OS disks and the disk is labeled for use with a Dell system only, if the means it will work very well on my Dell PC? The label does not which brand or model this disc is for, but said only for the Dell PC which is my PC. I'm assuming, the disk won't work on all Dells, maybe someone can offer suggestions, any help is much appreciated. Thank you!

    I have a few other questions about Windows 7, can I ask you about this on your Web site? Do not know how to contact you on your website. I can see other people responding to your articles, but that's all. I thought that maybe their might be a forum to post a question... Thank you for everything.

    You can comment on my site but comments will be public and it is easier to answer questions in the forums.

    If you want to be more precise, you can post in the Dell Community Forums. :

    http://en.community.Dell.com/support-forums/software-OS/

    There are also ways to private message me there is something I don't think that can be done by non-moderateurs on Microsoft Answers. However, I prefer answering questions on the forum:

    http://en.community.Dell.com/members/natakuc4

    Concerning the compatibility with Windows 7, I have listed a full pilot system here compliment:

    http://dellwindowsreinstallationguide.com/driver-sets/Inspiron-desktops/Inspiron-518-Windows-7-64-bit/

    Theres nothing to worry about your circuit board, the only driver who can break your system's BIOS update. I only list the last official update BIOS list Dell in my unofficial driver sets.

    The webcam should be covered by Dell Webcam Central but what is the monitor?

    http://ftp.Dell.com/Monitors/Dell_SX2210-Monitor_Webcam%20SW%20RC1.1_%20R230103.exe

    The main difficulty is to get a genuine product key Windows 7 64 bit. The time now it's easier to buy the 64-bit Windows 8.1. No matter if you buy Windows 7 or 8.1 64-bit both going to Windows 10 free when the RTM is out.

  • How to resize partitions of disk on Satellite A300-14V?

    Hello

    A drive in my Toshiba Satellite A300 14V 320 is divided two equal C: and E: volumes. The c: volume contains Vista OS, programs and lots of user data. The E: volume is the folder HDDRecovery contains it is about 4 GB, but when I check the properties of the volume E: I see 30 GB of used space. Could someone explain what is the problem?
    And there's a question related - why I am able to reduce volume E: only for about 12 GB and not able at all to expand the C: volume by Windows tools? Do I have to use commercial software to perform the task or it is easier and cheaper to reinstall the system with a disk-resuscitator?

    Thanks and regards,
    Alexander

    All new Toshiba laptops have this partition structure. On the second partition you have folder named HDDRecovery that contains the recovery image. This image will be used if you want to install HARD drive recovery facility - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    On the second partition, you can also save all your important data. This second partition is not reserved for the recovery image only. Very important, it is follow:
    # When you want to install the OS by using restore DVD disc the whole HARD disk will be formatted and all data will be gone.
    # When you use second partition of disk HARD recovery option will not be changed. This means that all data stored on the second partition will be there even if you have installed the operating system again.

    It is therefore recommended that you save all important data, music, movies, photos, or different documents on the second partition. If you want to use this HARD drive recovery option in the future please do not change the partition structure. When something is changed, it can happen that you will not be able to start the installation of HARD drive recovery.

    If you care about second partition and if you created recovery DVD discs, you can with the partitions all you want.

    If you have any other questions please let me know.

  • How do I change or remove the password disk HARD on my Tecra A9

    Hi all

    I looked for where I could, but didn't find any indication at all, so I'm asking here.

    I have a Tecra A9 in need of resettlement, what I like to do for me.
    I have a very good password on the HARD disk which I do not wish to give. So I want to change it or remove it completely.

    Please someone, how do I do? In the BIOS, I don't see that it has been defined, but all what I try, I can not change or get rid of it.

    Maybe I should add that since the original installation of the PC it was years ago and I don't remember not the 'Administrator' password.

    Everything is under control. I know the 'controller' password and have already successfully removed the BIOS password. Smart TPM is disabled.

    BUT what the disk hard drive password?
    Any help much appreciated!

    Thank you!

    Hello

    I've found several interesting documents on HARD drive password. Please read and if you have any other questions do not hesitate:
    What is A HARD DRIVE password?
    Is it possible to delete a HARD drive password?
    After removing the BIOS password you will be asked a password HARD drive

  • Qosmio x 500 10 - question of the disk recovery

    If I had to remove all McAfee 30-day trial and office stuff, as well as all Toshiba stuff unnecessary and THEN created a recovery disc, it would create according to the current set up?

    N °
    Original recovery image (you have preinstalled it now) is saved in folder HDDRecovery on the second partition. When you use pre-installed creator of recovery disk Toshiba to create installations of recovery disk tool pick up files from this folder HDDRecovery and create the disc of recovery facilities.

    This means, if you delete this folder in the other place you will not be able to create this disc or start the installation of HARD drive recovery.

    If you have any other questions let me know.

Maybe you are looking for

  • ITunes divides albums by artist sort mode

    Hello. I recently updated to Itunes 12 and discovered that when I add a new album to the library he very often gets split into individual albums for each track in the genre of the artist. In the genre of the Album, it seems very good, but not always.

  • Windows defender error - initialization failed: 0 x 80070006. This handle is invalid.

    Whenever it tries to open an error pops up saying: initialization failed: 0 x 80070006. This handle is invalid. The error was started when my computer crashed and I had to restore the system.

  • follow-up of the CPU

    Hello I recently inherited several servers that use BB. Apparently the administrator previous really like BB, but just left default settings. I am now trying to tweak it, so it may be of some use. I have several servers with hot cpu. Normal cpu setti

  • TCPIP in a laptop with no connection

    Hello I have a software that needs TCPIP to work. I want to work on my laptop when it is disconnected from the network. I tried the old trick of DisableDHCPMediaSense but it no longer works. I tried to create an old modem connection, but I can't beca

  • Group not filling record does not correctly

    Hi allI use Oracle Forms 6iI wrote a record group to display the values in a combo box based on the values in another combo box.First drop-down list box is p_builderSecond drop-down list box is p_siteThe values displayed in the two combo boxes are th