4090 XCDT - Boot by disc

Similar Questions

• Replacement of hard training for Satellite 4090 XCDT

  I have a Satellite 4090 XCDT, who needs a new hard drive, I'll try to find out if the computer/laptop BIOS can support a 20 GB hard drive (Toshiba Mk-2018GAS), can someone help me?

  Also until the size will it bear?

  Hi Steve

  I can't give you specific information about 20 GB of HARD drive, but I know that 8 GB of HARD drive will be recognized by the BIOS and it will not work properly. One of my friends has 4100XCDT and it works with 20 GB HARD drive with no problems.

  My opinion is that you should take some information from partners of service or Google around and I'm sure you can find HARD drive provider that can give you good information. I know that it is possible to built in the HARD drives to high capacity for older machines, but how exactly I can not explain.

• Error on MacBook with boot camp disc

  Hi, I was werking with Autodesk AIP2012 and tried to export a file as PDF wen I got to "clerical error" and inventor stopped and half THE icons on THE desktop was gone. I restarted the computer, but Windows won't start. I have the OS startend and tried via parallels, parallels but then showed the message "disc error". Someone at - it an idea of what went wrong?

  Hello

  What version of the Windows operating system is installed on the computer?

  When you are using Apple Boot Camp, you must hold down the Option key when starting. Then, by using the left and right arrow keys to choose which operating system you want to start.

  I suggest you to go through the steps mentioned in the link and the Coachman.

  ERROR: A disk read error occurred when starting Virtual Machine

  http://KB.parallels.com/en/112869

  A disk read error occurred"message also indicates the problem with the file system boot sector or the master boot record.

  If you have a problem with bootcamp VM try to restore initialization information:
  For XP, use the fixboot and fixmbr commands in the recovery console

  http://support.Microsoft.com/kb/314058

  For Vista/7 use bootrec.exe in the recovery console

  http://support.Microsoft.com/kb/927392

  I also suggest that you send your request to:

  Parallels:

  http://www.parallels.com/

• Satellite 4090 XCDT - upgrade RAM

  Hi all
  can someone tell me what kind of RAM I should get to upgrade my 64 MB? I am not a technician, but I hope someone can help.

  Who are waiting to hear from you.
  AGM

  Hello

  You can upgrade your 4090 Satellite up to 192 MB of RAM.
  At http://www.toshiba-europe.com/bv/computers/products/notebooks/satellite4090/product.shtm you'll find options all upgrade possibilities!

  The order number for a 128 MB RAM module is PAPA2062U
  This module can be ordered for each partner to Service Toshiba.
  Sammy

• Satellite 4090 XCDT and display on LCD screen area

  I recently bought the laptop above, running a Celeron 400, with 128 MB of ram and a 4.3 GB HARD drive. It has a 14 "screen. But when I installed windows XP Pro on this laptop when it boots into windows the visible area current decreases to approximately 12 ". It has a bios update to correct... ?

  When I go into Device Manager it shows 2 monitors, the default and the flat screen Toshiba 1024 * 768. I tried to remove the value by default, but in vain.
  It be possible to have windows running in a screen size... ?
  And if so HOW...?
  Any ideas would be most appreciated.

  Hello

  Your camera has video Trident Microsystems Cyber 9525 card. Try to find a good driver on the manufacturer's download site.

  Let me know if it works.

  Good luck!

• Satellite L - cannot boot from disc of Windows 7 32 bit

  When trying to install the 32-bit version of Windows 7 from the cd/dvd that came with my computer noting happens.
  I inserted the cd and restart the computer, but the installation does not start.

  The computer is running windows 7 64 bit I want to change to 32 bit

  Hello

  You can boot from another drive? Maybe that Windows 7 is noisy and so it can t be read correctly.
  Check this box!

  If you want to downgrade from 64 bit to 32 bit you do a fresh install. This means that you need to clean your current Windows partition so backup all files first!

• Cannot boot from disc or USB on Ideapad Z710

  I try to install Debian GNU/Linux on my Windows 8 Ideapad Z710, and I can not even my laptop to boot from an external support. InsydeH20 Setup utility, I have so far disabled Secure Boot, set the boot in UEFI, compatible USB Boot, Mode a PXE on LAN boot enabled and set my EFI boot to the EFI network order) 1 0 for IPv4, network EFI 2) 0 for IPv6, then (3) no other options) Windows Boot Manager. I'm not actually trying to boot from a network, I want to just start from the built-in DVD player or my DVD USB drive. When I boot with these settings, I get the error: network EFI 0 for IPv4 (...) initialization failed, and a similar one for IPv6, then it starts with Windows. Why I can't boot from DVD or USB?

  Another thing I tried is affecting Boot Legacy Support and Boot Priority to first legacy Mode (with Secure Boot disabled) which translates my computer laptop startup in directly to Windows even when ODD USB appears first in the boot order.

  Please tell me how to start on a Linux DVD or a USB on this machine! It's a major purchase for me, and if I can't install Linux on it, this laptop is completely useless for me. Please answer.

  Try this:

  1. fix the disabled startup.

  2. set start on Legacy Support Mode.

  3. start first priority inheritance

  4 Save and exit.

  5. stop computer.

  6. Insert your usb pendrive.

  7. press on Novo.

  8. Select the Boot menu

  9 select your USB key, and then press ENTER.

  Note: USB Boot must be enabled.

• Boot from disc 2

  Simple; P

  The place of HP chose by default HD slot on my Pavillion dv-7 1140 is quite atrocious (under where you place your Palm - maybe to keep nice and warm?). I wanted to spend my slot HD 2 but don't see any option to boot the laptop from it.

  Somehow change or Slot 2 is not bootable?

  Hello

  Unfortunately, you are right in thinking that you will not be able to boot from a disk in the secondary Bay.

  Kind regards

  DP - K

• Error keyboard satellite 4090 xcdt

  I installed winxp home on mij satellite, it works (slow but works).
  Since a few days I had problems with keyboard mij.
  When I press left SHIFT I get Windows XP help screen. The left alt is given too many strange things.
  So I can not use capitals because the right pass to give me the office.
  The keyboard is messed up, I reinstalled Windows XP. Formatting the hd but no use. When you enter the name of the installation, I got the same problem.

  What is this possible?

  Hello

  try using the original recovery CD. Install the original software (Win 98 I guess) and check if it still the same. If Yes, then I guess you have a problem with your keyboard or keyboard. If this isn't the case, then I'm completely lost.
  Try attaching an external keyboard and check if the problem is still there.

  Good luck!
  Tom

• computer HP mini 110 won't boot recovery disc

  HP mini 110 dosnt have embedded dvd player and will not load the dvd collection I have orderd from hp through the external dvd player. is it possible to change the file system of the dvd and put it on a USB key?  or is it possible to get the recovery media to run on the mini? It is the complete crash and don't know what else to do. It pases hd test and memory test through the bios...

  It's actually pretty simple. The method you described does not work because it is not is not a bootable flash drive.

  The following video tutorial shows just how do. All you need to do is get past about twenty seconds of terrible sounds at the beginning of the video. The rest of the video is silent.

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• Satellite C650 - wouldn't boot via USB

  Long story, please bear with me

  A friend of a friend has a laptop Toshiba Satellite C650 she bought less new year with Windows 7 top and a few weeks ago, she had problems with a virus/spyware and paid somebody £40 who said they would sort it out with it. When it is revenue that he would just try to start XP and then the blue screen of death as XP tries to start. All attempts to communicate with the person who did this Fix has since then.

  Knowing that I have a Satellite and a reasonable knowledge of computers, my friend asked me if I could have a look and try and do a setup that would work for her and I agreed thinking along the lines of using my Vista Satellite, CD boot recovery disc, install Vista and then upgrade to Windows 7 by using the product key that she on his machine so enter the bios that I put it to start starting from the CD, insert the CD, turn on and off the drive, but he tried to load XP before the dreaded blue screen of death again :( Looks like that there is not drivers for the CD drive :(

  So I copy the files to an external hard drive that is empty I put the boot menu to boot from the USB key, plug the HD and turn on and instead of boot from the external drive, it still attempts to load XP before the blue screen again.

  I ve done the same with Hirems on the disk and once again the same thing, what it will do is try to load a version of XP from somewhere and then crush the dreaded :(blue screen

  Any ideas what can be the problem and how can I force it to load from my external hard drive so that I can do a format and reinstall?

  Which is higher
  Holmey

  Hey,.

  A little confused your assignment, you used another disk of your Toshiba laptop recovery, right? Well, if it s not the same mode, it will not work because each laptop model has its own installation of recovery with different drivers and tools. There is therefore no recovery disk that works for each laptop model.

  Best way to restore a clean Windows installation is for this model of laptop recovery disk. If you n t have it can be ordered directly from Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

• "Stop". Unknown hardware error. c000221 'blue screen. At the start of OS disc.

  Initially, my computer was frozen then it wouldn't load windows because windows has been closed down to protect my computer. But wouldn't boot OS disc.

  Then I have a windows c prompt c:\. used some commands, but they did not work. then I changed the master boot system because he said that it was not valid. Now, I get this error message.  "Stop". error hardware unknown c000221. "Please help what we days!

  Hi jytrefe,
   
  the problem may occur if the file described in the error message is corrupted. The following files are checked for integrity to start Microsoft Windows XP:
  • All the driver files (except those that are loaded by the system loader to start the computer)
  • All libraries dynamic link (DLLs), including user, graphical Interface (GDI), Shell, Kernel, Ntdll, Crtdll, etc..

  Follow the suggestion given in the article to resolve the problem:

  "STOP: C0000221 unknown hard error" or an error message "STOP: C0000221 STATUS_IMAGE_CHECKSUM_MISMATCH".

  Additional reference on:

  "Bad Image Checksum" error when you upgrade to Windows XP

• Problem with dual booting BACK and Win7.

  I tried to configure a machine as follows: 0 = 250 G SATA drive with 512 byte sectors BACK 6.22, only fine boots. Disc 1 = 500 G SATA with 4K with Win 7 sectors. When you install Windows 7 on disk 1, it ignores the C: drive on drive 0 and affects the C: drive letter in the windows partition. Because the c: drive on drive 0 is no longer a drive letter designation, no bootstrapper is installed. I cannot change the letter of the windows system drive, in disk management, and as such cannot get BACK start as the C: drive. This is new behavior, I did install it on NT 3.5 thru XP on the same reader or different readers without fail. Win 7 enter the C drive letter for the system drive? If so I'll have to go back to XP for double boot installs. I get this same behavior on a single disc with the two BONES. If anyone has an answer, I guess that the next option may be a third-party boot loader.

  I need a startup BACK too, the only way for me to do is to install BACK first, and then XP and win7

  After that it starts on win7, xp (earlier version of windows), select and then from there BACK.

  It's 2 steps instead on the 1 step :) but it works

• Boot Camp keyboard and trackpad will not work. They do in Fusion

  Hello

  I have a problem with my VM ware / boot camp of activation. I have a Boot Camp partition on my Macbook Pro. I am able to boot the disc using the fusion, but when I try to use Boot Camp coming to the windows activation screen and my keyboard and mouse do not work so I can't press the button to continue. I tried to boot into safe mode on boot camp and the keyboard and mouse are not recognized either. I tried to plug in a keyboard and a USB mouse generic and is not no longer works. I am running XP pro (not OEM version).

  Does anyone have any suggestions on a cure?

  Hi tsugua,

  This sounds like it may be more than one Apple, or Microsoft problem. However, my recommendation would be to ensure that the leopard drivers have been properly installed. To install the insert drivers your Leopard installation disc and run the setup.exe if is not autorun. So, make sure you run software updates of the Mac OS to ensure you have the latest version of the Bootcamp drivers.

  Let me know if this helps.

  Eric