error library language selection

Similar Questions

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• Satellite L670-143 how to get the language selection during recovery?

  Hello

  I just started my L670 for the first time today, I'm Dutch speaking so I chose "Dutch" (Nederlands) as the language of the interface for my Win7 installation. Shortly after installation, I noticed that the usual folders that I have on my main PC (English) were not there,

  instead of the file * / Users / * we created a folder * / Gebruikers / *.

  Because I like to copy a lot of files / preferences of applications from my main PC to the laptop and I'm not comfortable with the Dutch interface, I would like to also the English interface.
  For this purpose, I decided to do the system restore to choose English as the main language just as it is on my main PC, taking * 0 * when starting, select F8, click the method of complete recovery from Toshiba, but now I can no longer choose between * Dutch/French/English * as the language of the main interface and it installs automatically with the Dutch language.

  How can I do the complete factory restore then I have the choice of the language back, so I can install English please?

  Please, if anyone knows how I can get back the language selection of interface with the Toshiba recovery method?

  Hello

  As far as I know, you can choose the language of the system only once at the start of the laptop for the first time.

  I think this laptop model was launched in three different countries and that's why you can choose your preferred language for the first time. After that, the selected language will still be available on the HARD disk, but other languages would be disabled.

  Maybe you can order a disk recovery in English from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• HP Photosmart C6280 all-in-One: Photosmart C6280 does not print after trying to clear the error library/startupitems

  I had a Library/Startupitems error since update my software HP a couple of years ago.  Trying to finally solve this problem myself, the HP site suggested to remove and reinstall the software.  There are no active link in the pages of HP support for a download.  I found a C6200 series pilot online, I have installed, but now I can't print anything but a test page, and I still have the error Library/Startupitems.  As it is, I can not even find this file to fix the error.

  Hi @Eric_V67

  I don't know exactly what causes this error, but I think it has something to do with permissions of drive Macs. Please, try the following steps and let me know the results of your efforts;

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• Satellite P200 - 1EE HD DVDs - cannot play beyond the language selection

  Hi all

  I recently bought a new Toshiba Satellite P200-1EE.
  However its HD-DVD player would not play a movie HD DVD (Transformers) at all!

  When I insert the disk it shows the first screen - language selection Menu
  When I choose English or anything else out there it just crashes and beyond would play.

  I had the same problem with another disc too.

  All the world has experienced the same problem and managed to resolve it?

  I went through some of the other solutions given here inculding update to the latest drivers etc, but nothing seems not to help.

  Thank you very much - Arvind

  Hello

  You should visit the page of the Toshiba driver and need to update the firmware of CD/DVD players and HD Toshiba DVD player software.

  This aid comes of course!

• When install Vista Home Premium computer hangs on the language selection screen. No visible cursor, the keyboard and the mouse does not.

  Hi, when I try to install vista that Home Premium 32 bits on the computer of my son, through the installation of loading files with the gray bar at the bottom, then goes to the screen language selection, at this stage, I can not select anything using the keyboard or the mouse. There is no cursor visible. Keyboard and mouse both work fine in the bios and on other machines. Have used other keyboards and mice on the machine in question, but that makes no difference. Tried another copy of vista, no difference. Tested on Windows 7 install and everything works fine!

  Very confused, thinking that it must be a driver problem, but how about him? Any help is appreciated!

  Hi Rickydg,

  Thanks for posting. Please contact ASUS and see if there is a BIOS update available for your system. Update the BIOS and then try to install again.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Trying to create a bootable USB I get message error "ISO image selected is NOT a valid ISO file.

  Questions of ISO image

  I'll try to find a way to install Win 7 64 bit Pro - on multiple (without a DVD player) netbooks and thought I had found the solution using DigitalRiver to upload a picture ISO of the OS - then (using the MS Windows 7 DVD/USB tool) - create a BOOTABLE usb key?

  However, yesterday I downloaded the image ISO (http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65805/X15-65805.iso)

  (which, according to the website of souce was supposed to be 3 GB in size - but was 2 GB in size (WHY?)

  And on the use of the tool USB - a got a message error "ISO image selected is NOT a valid ISO file"

  -What this means and what I can do to work around this problem?

  And, I think - that this procedure works with a "corporate license"?

  Tried - same result - the file is obviously corrupt
  I ended up using a previous download that works!

• Widgets: can we detect the language selected in the device?

  Hello

  Trying to do a multilanguaje UI Widget,

  and I do not see if we can detect the language selected in the device of the user?

  Depends on the language I want to launch a page in the English user interface and menus, or page menu and Spanish user interface.

  Any idea?

  Thanks in advance.

  All the best

  Auto answer:

  It is possible to detect with: navigator.language

• JavaScript exception: error calling the selection function: TypeError: $(...). museMenu is not a function

  Since the update, one of my sites is weird. When you open the Web, that's what he said, "JavaScript exception: error calling the selection function: TypeError: $(...).» museMenu is not a function ". The site is www.hibiscuscuisine.com. If someone could help me understand this point, I would really appreciate it. Thank you

  Hello

  Please follow the complete instructions mentioned in this post - MuseJSAssert: error calling the function switch: TypeError: .museMenu $(elem) is not a function by Zak.

  Let me know if it works

  Thank you

  Ankush

• Printing error: the printer selection failed. Restore previous selection.

  Hello!

  Sometimes when I print in InDesign CS3, the default printer is PostScript and trying to change the error "the printer selection failed. Restore previous selection. "is displayed.

  It s the same mistake in this old thread unresolved:

  Printing error: failure of the selection of the printer. Restore previous selection.

  Does anyone have a solution to this?

  What is the operating system? CS3 has not been tested on recent versions of OS and may not be fully operational. You can export as PDF and print from Acrobat or Reader.

• We get an error in this selection

  Hello
  
  I am getting an error on this selection
  
  Select add_months (to_date ('31 - MAR-' |' to_char (to_date('31-Mar-2011') ',' YYYY'))-12) of the double
  
  Kindly help!

  do you want this?

  SELECT ADD_MONTHS(
     TO_DATE('31-MAR-'||
             TO_CHAR(
                 TO_DATE('31-MAR-2011','DD-MM-YYYY')
                 ,'YYYY')
              ,'DD-MM-YYYY'),-12)
          from dual
  

• Packed error Library Project: contains the compiled code

  I have tried to understand how the packed library works for LVOOP, but facing a wall with an error and do not know how to solve.

  (i) I did a "class 1", I then put in a library called 'library'.

  

  (II) I create a library packed and put the top-level library source files

  

  (III) once compiled and registered, I create a new project and add creating newly packed library project to it. Secondly, I add one newly create class, named 'class 2 '.

  

  (IV) I put the legacy of class 2 as a child of the class 1.

  

  (v) select new VI for substitution

  

  (VI) get error 1035

  

  What I'm doing wrong or how to fix this?

  The default setting for the packaging of screws in lvlibp deletes the block diagram.

  You must not delete dynamic distribution pattern-block screw you wish to override.

  hope this helps,

  Norbert

• Change the language selection

  Hello

  How could he do, change the selection of the language and the country, in my iPhone 6 s, 16GB?

  pappasjohn47 wrote:

  Hello

  How could he do, change the selection of the language and the country, in my iPhone 6 s, 16GB?

  Change the language on your iPhone, iPad or iPod touch - Apple Support

• Satellite C50-B-13N - error "Reboot and select good boot device."

  Hi all

  My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

  Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
  seem to have accidentally deleted the data on the disk.

  I have now repeatedly received the error message "Reboot and select proper boot device."

  I tried the F12 approach to , but my Start Menu does not have this option.

  I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
  In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

  Please give us a solution.
  The laptop is 4 months old.

  In addition, how can I start the process of an application under my warranty?
  A dissatisfied customer of experience to date.

  Kind regards

  CGI

  I seem to have accidentally deleted the data on the disk.

  Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

  I guess you have not created such recovery media as recommended in the user's manual.

  Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

  Means of recovery can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• DB connectivity Kit: syntax error in a SELECTION of data from joined tables

  Hello everyone

  I'm putting in labview a SQL query on joined tables.

  As an example I take a database to store the data of basketball 2on2 matches, which tables are

  corresponds to (matchId, Thomas, teamB)

  teams (teamId,PlayerAname, PlayerBname, nationality)

  nationalities (NatId, natName)

  To get an array of result with the game as well as the names of player as well as their nationality, I use this query on MySQL (which works on command line interface)

  SELECT MatchID,
  T1. PlayerAName, t1. PlayerBName, n1.natName,
  T2. PlayerAName, t2. PlayerBName, n2.natName
  MATCHES m
  INNER JOIN teams t1 ON t1.teamID = m.teamA
  INNER JOIN teams t2 ON t2.teamID = m.teamB
  INNER JOIN nationalities L1 ON n1.natID = t1.nationality
  INNER JOIN nationalities n2 ON n2.natID = t2.nationality

  When I put it in labview, using the block 'select data', I get a syntax error as shown in the attached screenshot.

  

  Am I something mistanking using the JOIN examples statements or aliases?

  Thanks in advance!

  The select VI is designed to be a simple way to select from a table. I doubt that he can do joins (and would not certainly need the 'FROM', even if it can). What you can do instead calls the query execute VI and give him the complete SQL query. I don't remember if it returns the data in the recordset object, so you must do so separately.