JDE 4.5.0 Installation of Rimlet compatibility on old BB devices

Similar Questions

• Link new installation of thunderbird with the old profile.

  I created a new profile and stored on an external drive, there is a certain messages, I just had to reinstall win7 and do not know how to link a new installation of thunderbird with my old profile. Seems fair to get a host of issues that do nothing.

  Look at https://support.mozilla.org/en-US/kb/profiles-tb#w_how-to-find-your-profile and then go to the directory corresponding to your external drive to find your old * *.default file.
  Copy your old profile to the directory where your current profile is stored.
  See https://support.mozilla.org/en-US/kb/using-multiple-profiles to switch to your old GOLD "profiles.ini" edit profile to change the 'path' in the name of your old profile.
  Restart Thunderbird.

• BlackBerry JDE plugin hangs during installation

  So I have Eclipse 3.4 installed and downloaded the BB JDE plugin 1.0.0.67 + 4.5 combo executable installer component. When I install the JDE plugin, it goes through all the steps of component installation, but then gets stuck at the end of the phase "install...". ». The progress bar is almost 100% complete, and the above text it just says "install...". ». I left the night yesterday and came back this morning and it is still stuck in this State. The Task Manager shows that the "javaw.exe" process related to the installer using ~ 100% of one of the 2 processors.

  I tried to remove all the "net.rim" their records of my eclipse installation and re-run Setup and it gets stuck every time.

  Someone has encountered this problem before? Happens to me every time both at work and home, so I guess that others have seen too?

  Thank you!

  OK, I solved it by installing the JDE plugin in a 'clean' folder eclipse on which no previous BB JDE plugin has been installed. Install BB JDE plugin seems to have some problem writing on the old files created by himself.

• BlackBerry JDE Build Error - new installation - Hello World

  I'm new to the Blackberry development.  I was able to get Eclipse works without any problems whatsoever and I built a few sample programs and one of my own.  However, it seems to me that RIM Blackberry JDE has some nice features for the visualization of information specific to Blackberry batteries, memory statistics, etc. Then I tried to get the RIM Blackberry JDE 4.5 and 4.7 installed so I can revisit.  I had some problems installing a reason any.  I've gotten past these problems, but I'm starting to get the headache trying to build "Hello World".

  What would someone mind helping me resolve the error of next generation for 'Hello World '.  It will probably take something simple and I feel stupid, but I have to finish reviewing the RIM JDE so I can select my development environment and begin to develop.

  Building helloworld
  D:\Program Research In Motion\BlackBerry JDE 4.5.0\bin\rapc.exe-silencieux import ="...... \.. \Program Files\Research in Motion\BlackBerry JDE 4.5.0\lib\net_rim_api.jar"codename = helloworld helloworld.rapc warnkey = 0 x 52424200; 0 x 52525400; 0 x 52435200 D:\Temp\HELLO\helloworld\com\rim\samples\helloworld\HelloWorld.java
  I/o Error: Cannot run program "javac": CreateProcess = 2 error, the system cannot find the file specified
  Error while building project

  Thanks in advance!

  (You must make sure that) that you have installed a suitable JDK, and (b) in the JDK bin directory is in your Windows PATH environment variable.

  Open a command window and type javac

  If it is not found, the JDE cannot find it either.

• Desktop Clean Installation Windows XP compatibility

  I tried to install the NeatDesk scanner today. A message appears saying that it is not compatible with Windows XP and if I don't get software compatible with the seller, my computer can be damaged, now or in the future. How is risky to move forward? From what I've read, the customer service is difficult to achieve and has long waits. But I want to do any damage to my computer.

  Could be better answered on the forums of NeatDesk. The forums are for products only HP. If you have an HP computer, you can find an answer on the computer HP desktop or laptop forums, but I am betting that NeatDesk will have the best response.

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• LaserJet Pro 200: LaserJet Pro 200 Durinf Installation PC sees it as a storage device

  I don't know what happened.  I already installed the printer drivers on my laptop work without problem in November.  For some reason any 2 weeks ago the laptop stopped connecting with the printer.  I could see the printer.  However, the mode of 'Use printer offline' status printer & when I would click on use printer online; any print job would be mistake.

  This is my 2nd attempt to complete the installation.  I receive the support tech organization administrator rights.

  For some reason any during the installation, the laptop think the LaserJer is a cd ROM?   When installing, I get as extreme Kael'thas connection to the device (I connect with USB cable) which will expire.

  Any help is greatly appreciated, it's wrong to spend so much valuable time trying to correct.

  Thank you ray b

  The Smart Install setting is on the printer itself.  The screen on the printer, go to the configuration menu (click the icon that looks like gears). Then click on the Service menu item.  From this menu, until you see the "HP Smart Install" option Click on this option and turn off the power.

  I hope this helps.

• A1700n not allowing the installation of audio drivers for the audio device.

  HP a1700n

  Windows xp sp2

  recently installed a new hard drive and reinstalled the operating system from scratch.

  When attempting to install the driver for the audio device, named as "Audio device on high definition Bus" I'm an abupt with a blue screen stop referring to * RltekAUD.sys* * (hot flashes too fast to get the entire message.)

  Before you install the new hard drive, the system worked well.  I tried the fix suggested by HP, 4 different realtek drivers.

  I tried to install in safe mode, which installs without error, but no sound, and regualr mode restarts, causes the blue screen with the error above.

  Rotate the processor Dual core AMD Athlon 64 x 2 3800 +.

  I disconnected an additional device and can't seem to get my sound.

  Anyone else having a similar problem?  Fix known?

  It was an exhausting fix.  However, a problem that seems prevalent with machines of OS that came with Vista, but got XP installed on them.

  The problem is resolved: that is the solution and the method.

  First, I tried to reinstall the operating system and installing the drivers in a different order.  -WORK

  I reinstalled the operating system and tried to install the driver in safe mode, partial correction, pilot would install, but would not start in standard mode - WORK NO

  Downloaded and tried 5 Realtek driver different solutions all the way from rolling back or front - WORK NO

  SOLUTION THAT WORKED-

  Found this in another forum:

  Log in to regedit, search for "bus auu", delete all entries

  delete "" busMicrosoft UAA HD audio driver " since the Device Manager"

  Restart in safe mode

  install the version 2.02 driver realtek

  Restart in safe mode

  audio work

  relocation of bus Microsoft UAA HD audio driver

  SOLVED

• How can I disable my installation of PSE on my old computer which crashed and are not accessible.

  My old computer crashed recently and it does not start. I have a new computer and I installed the PSE program successfully, but the installation procedure wants to first disable the old installation. How can I do that if it is completely inaccessible?

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Installation of the management for the storage devices Pack

  VMware vCenter Operations Manager 5.8.3 build 2076729

  Using the version of database operations vCenter 1.0.3900

  Try to install the vmware-vcops-5.0.0-MPforStorage-1.0-1450289.pak.

  Able to accept the EULA, the interface shows then updated current for about 10 minutes.

  Presented with the following, but no mention of the current day (06/10/2014) or installation of the pak software.

  

  You logging into the custom interface and by displaying the technical support information tab / indicates the following with no mention of the icon to describe.

  

  Can anyone say on where to look and what the next steps? Thank you

  I checked to the administration portal, see the next update:

  Last post last message; No file update to install!

  

• M1536dnf - the installation program could not connect to your device. Check the IP address

  I recently bought a LserJet Pro M1536dnf for my business, then we would have network printing and scanning. We have both Mac and Linux PC with a single machine Windows solitaire which is kept away from the network for his own protection, and I expect from Linux but this is not where the problem is. Due to our network configuration, the only way to connect to the printer is by IP, not not using Hello. When installing using the installer of HP on the Mac, I choose 'Add intellectual property arrangements', enter the IP (192.168.1.247) and click OK. After that, he always comes back 'the installer could not connect to your device. Check the IP address, make sure that the device is powered, and then try again. "I know I can get to the printer because I can access its web interface in Safari. I tried to reset, update firmware, reboots, power-off/power-on different computers, nothing works.

  Curiously, I could add the printer very well on Ubuntu Linux computers and print immediately, although the scanner still doesn't work here. So my problem is on the Mac.

  OK, I have now works. The HP installation program provided on the CD-ROM supplied with the printer does not work. After you download the new version of support.hp.com, I could successfully add the printer by IP address.

  Also, just a quick note to all the world using Linux (although it is not officially supported by HP):

  The printer works fine, using HPLIP, but requires at least version 3.11.1 to work. I had to add an additional to my linux installations software source to make it work.

  Under Ubuntu 10.04/10.10, add:

  PPA:hplip - isv/ppa

  Other Linux distributions will be different, if you are having problems check to see how to install the latest version of HPLIP software.

• Creating cloud app detection installation of LR on the old disk

  Recently upgraded my Macbook with an SSD (MainDrive) and did a new install of 10.9.4 (Mavericks).  In the process, I moved my old HDD (now SecondaryDrive) from the optical drive.  This player has LR 5 installed, but I would have preferred a new installation of my new drive.  Creative application cloud seems to detect Lightroom on the old disk and simply States that it is "up to date".   What is strange, is has not detected installing CS5 on the player of old, now secondary.

  Without touching on my old installation or by car, how can I get the cloud app simply install a new copy of LR on my now main SSD drive?  Is there a way to tell the application to the analysis only the OS disk?

  I tried a few tricks such as deleting the file opm.db without success.  I moved the app LR on applications on the SecondaryDrive in the trash, restarted the creative cloud application and LR is still present.

  I don't want to start in the other drive and uninstall LR, I think I would really not.  Any suggestions?

  Just seen the status of LR installed to not installed.  I was just in the cloud application settings pane.  Very strange.

• Tecra A9: Installation after XP need driver for PCI device

  This is the detail
  I did some research and I could not find an answer
  I have already installed all the drivers that are in the toshiba Web page

  Is a Tecra A9

  in detail

  PCI\VEN_8086 & DEV_444E & SUBSYS_444E8086YREV_01\4 & 633DA 227 & 0 & 00E2

  any idea to solve this problem?

  Thanks in advance

  Post edited by: ryolatl

  It is the device of memory Intel Turbo (former Robson Technology).
  Sorry, but this product is not available Windows XP driver. Toshiba or Intel.

• Windows 7 compatibility on old HP computers

  We have more than 300 computers at our school who have the XP operating system on it.  Because XP will expire soon we are forced to get Windows 7 for all our computers.  Because our laptops are so old I don't know if they will work on the Windows 7 operating system.  Can you tell me if it will work?  Our HP computers are HP Compaq 6510 b.

  Protection.

  Academic Volume Licensing.

  http://www.Microsoft.com/education/WW/buy/pages/volume-licensing.aspx

  You could save thousands.

  REO