HP Photosmart C6280 all-in-One: Photosmart C6280 does not print after trying to clear the error library/startupitems

Similar Questions

• 7520 e-all-in-one black ink does not print

  Black ink will not print.  Tried to clean it. Replaced by the new cartridge. Other colors are fine.  Picture is fine.

  The here document has troubleshooting which can help solve the black does not print on your Photosmart 7520e.  Don't forget to check the vents, as shown in the third stage of six, solution.  If the above does not resolve the problem, the message here can help.

• HP Photosmart C309a does not print after I installed new black ink cartridge.

  Printer was working fine until I replaced the black ink cartridge.
  Does not print the text in black on the printer test page.
  The States new HP printer installed cartridge.
  All other colors are working well and were replaced at the same time.
  Tried cleaning cartridges - pulling the cartridge and put back in - turning the printer off and on again.
  Also tried to restart the computer.
  Could there be a problem with the ink cartridge itself?

  REAL SOLUTION. I had the same experience, spent hours pulling my hair like children had project do to school and it was 22:00.  Your cart is clogged! Here IS THE SOLUTION! (: 1) remove all ink cartridges. (2) extract the carriage that circulate in the ink cartridges by lever on the right and the trolley lifting vertically. (3) wipe any accumulation of visible ink on the outside with clean cloth or paper towel. (4) THIS IS THE KEY: keep transport under hot running water to empty all the handwritten entries in the irrigation channels that distribute ink. Keep rinsing in clear water i.e. no sign of ink. (5) trolley dry with clean cloth and blowing in areas, you can access in order to remove the remains of the water. (6) let transport air-dry overnight. (7) Re-install transport, then reinstall the ink cartridges. 8) ENJOY YOUR PRINTER. (9) I saw many entries on this topic dating back two years, without real solution offered. I am an automotive engineer in unemployment. If HP (or anyone else) would like to hire a smart worker, engineer in the Detroit area, please inform. Thank you!

• Photosmart 3200 does not print after a Win 7 Upgrade

  our Photosmart is connected to the Linsys wireless router.  I put Windows 7 on my laptop (Dell Inspiron).  I loaded the drivers for Win 7 HP.  Adding printer functions and did while it was plugged into the laptop, then wireless, had to manually set the IP address of printers and the laptop did not.  then all loaded, I can see the printer, even ink levels, but when I printed, it Files and then I get an error message.  I tried to troubleshoot it, but he couldn't come up with anything...   Any thoughts on what it takes to get this happed to print is appreciated, oh yes, he did print the test page.

  Hi, Yes, the printer is only attatched ot the router wireless... I attatched just for the laptop with the e cable so I could print a pinch.  it load and I have this printer on my list of printers.  then I disconnected and loaded wireless that worked but I had to use the option to manually set the IP address of the printer.  So now on my printer list and it shows its ok "connected."  I can see the ink etc levels.  but when I try to print, it seems that everything is fine, he winds up in the print queue and say 'impression', but after a bit it turns into 'error '.  So I clicked and ran to help her out but going home.  He did print the test page and the page of diagnosis? He defined as my default.

  I tried to print an e-mail of my Storage with Windows but the same error occurs.

• HP DeskJet 3630 all-in-one: desjet 3630 does not print color

  Hi, I bought a new HP DeskJet 3630 series all-in-one printer today. Setting up the printer I did several tests that show color printing, however, whenever I try to print an image in color (working on my daughters school book) it prints in black and white. I did troubleshooting all I can think of, we have no black & white printing turned on. I'm not quite sure, what else to make sure the printer is brand new and should be able to print in color?
  Any help or advice would be much appreciated.

  Not quite sure what I did to make it work, di, but the cleaning cycle for the cartridges of ink & rebooted several times, and the printer is now printing normally =)

• All-in-one HP OfficeJet 8610: All in one HP 8610 does not print right to police

  Hello

  you just bought a new HP all-in-one officejet 8610 to replace my 8600.

  I use a police - Babylon5 hollow - to print a message (like "COPY") to the text, in red (but result in black or any other color is the same).

  While my 8600 (and all my other printers) does it perfectly, the 8610 messes things.

  The lines of the police (I use the 50 size) are so thin that the text is as good as not there.

  I checked the settings of the printer, and they are substantially the same as for the 8600.

  Any ideas? I use this font for years, and I am very attached to it :-)

  Thank you

  Leo

  Hello

  It is not the solution, but I solved my problem by using another font.

  Thanks for the support,

  Leo

• Want 4520 all-in-one: 4520 want does not print from internet

  The printer prints documents from Word and other programs, but NOT the internet. I checked the network printer is connected to and I am connected to this network. I checked to see if it was a driver issue I saw one when I checked the device. I downloaded it, but it has not made a difference. I do not see a network called Direct 85 HP Envy 4520 series listed in network connections options, but when I select this option, I have no internet connection, only the printer. I want to be able to be on the internet and be able to print from it. Please help, thanks.

  Hello

  Looks like you are using the direct wireless feature of your printer that allows your printer generate its own wifi signal and your laptop / PC connect directly to-cela the drawback being that it puts the signal from your laptop / PC to the printer and prevents internet access.

  The best way to print wireless while being able to use internet on your device is to connect your printer and your laptop / PC to your home wifi signal. You must disable all direct features active wireless on your printer off and connect to your wifi signal at home (not the 85 HP Envy 4520 series Direct signal).

  Pages 36 and 37 of the below user guide shows how to configure the wireless connection.

  http://h10032.www1.HP.com/CTG/manual/c04778353

• Photosmart 6520 does not print after upgrading the firmware on the router.

  I have problems with my router and a remote technician for Verizon FIOS updated firmware, solve my problem of the internet, but now my printer is not working.  When I try to print from my macbook pro (OSX Lion 10.7.5) it is said that the printer is idle.  When I try to print from my ipod and the iphone, it is said that it prints, but then nothing happens.

  I was able to set up direct wireless to print, but I don't want to go into the settings and change networks whenever I need to print.

  I tried to turn off the router unplug the printer and turn it back on.

  I checked to make sure that the WEP code and network name are correct.

  What can I do else?

  treeBear wrote:
  

  ricksmom wrote:
  

  I appreciate really all the efforts that you and other posters are on this issue, but I feel that I will not find a solution.  Maybe a new router?

  It is a long shot. But since we are short of ideas, please try to change the configuration of the router from WEP to WPA2 and try again to establish the connection. Because WEP is very old standard, some routers may have a few inherited defects that were never resolved.

  Well... This opens a huge can of worms, it leads eventually to a solution.  I changed the security settings and when I presented to them, 'wait while we apply the settings' screen appeared and never went away.  The timer kept spinning and this went on for over an hour.  Neither the old or new passwords worked and I completely lost my internet connection.  I called Verizon and ordered a new router and said the technician on the line of my being stuck in limbo. After a few basic tests (unplug and pluggng again) she transferred me to someone in the advanced group.  To make a long story short, he traced the fault not the router, but the optical network outside my home box.  It reset, reset the router (losing the new security settings and everything else) but my internet is back, and fortunately, so is my printer.  I'll live with that until the arrival of my new router state-of-the-art.

  Thanks for the suggestion, it was a frustrating experience, it finally lead me to a printer to work! I doubt that I would come to this point another way.

• MacBook / J4580 All in One / software Parallels - does not PRINT - HELP Please

  I'm going to lose my job in real estate - I have a Macbook - when I'm on the side of Mac - the printer works - and print.  However, when I'm in Parallels - it does not recognize - only get the message "printer error".  Real estate agency associated with the elements run only windows - so I spend a lot of time in the analogies.  Our it guy at the office said to make sure I have install the CD on the side, parallels - but this doesn't work either.  Called the Apple Support - they could not answer for Parallels - cost of Parallels for their support - so I will try this forum first, before I have to pay to see if anyone else has encountered this.  Thank you!

  This can be a Parallels in question, but let's get XP work just before mess us with Paralalls:

  Verify that you can access the web page internal to the printer by its IP address.

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click on 'Next' and follow the instructions.
  5. now, select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".

  6. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  7. Add the name of print spooler, and then click "next".
  8. click on "next".
  9. click on "Next" and "Finish."

• HP Photosmart C4200 all - in-one series. Does not print because the undetected alignment page.

  Does not print not because Error Message "alignment Page not detected."  Thanks Chaso

  can someone reply to my message number 5, thank you. Chaso.

• Printers HP e-all-in-one, 4622. Does not print the page of the website.

  Windows XP.  Starting yesterday will not print page of the website.  Cannot print My Documents.  Get the message "an error has occurred in printing".  The following screen shows "save the file under...". ».  Have you tried another USB port and a computer restore to earlier date - nothing works.

  Greetings! Welcome to the Donaldsan forums

  I read your post about how you cannot print from a Web page. You are able to correctly print your documents, that shows us that the printer hardware is correct.

  I suggest that you try to print from a web browser that is different to see if that helps. If this does not work, the problem may come from this Web page that you are printing from.

  You can also run the print and Scan Doctor to fix problems printing or scanning.

  I hope that helps!

  Have a nice day

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• OFFICEJET J4680 ALL IN ONE PRINTER does not print after installing Windows 7

  THIS HAPPENED MORE THAN A MONTH. I STARTED WITH WINDOWS VISTA. HP SUPPORT ADVISED LATER FOR THIS WINDOWS 7 WORKS BETTER FOR MY PRINTER. NOW I HAVE INSTALLED WINDOW 7 AND I GOT THE PHONE SUPPORT TO GO ON MY COMPUTER AND SET IT UP. EVERYTHING WORKED AS SUPPOSED, PRINTING, SCANNING. THE NEXT DAY I TRIED TO PRINT SOMETHING AND I WENT BACK TO SQUARE ONE. The SCREEN LIITLE ON THE PRINT JOB CAME AND SAID THAT the PRINTER does NOT PRINT. I WENT TO THE HP SOLUTION CENTER AND A NOTE SAID THAT THE PRINTER IS DISCONNECTED. I RETURNED AND COPIED MY NETWORK CONFIG. AND THE WIRELESS TEST. EVERYTHING IS RUNNING WELL HUNG OF THE PRINTER. THE DEFAULT PRINTER IN THE RIGHT IMAGE. THE ONLY THING I NOTICED WAS IN THE PORT AREA. UNDER THE WINDOW VISTA, I GOT TWO PORTS. ONE WAS FOR THE PRINTER AND OTHER FAX. WHEN THE HP PRINTER HAS BEEN REINSTALLED, I DON'T KNOW IF IT STARTED WITH ONLY ONE PORT. THE PORT IS ENABLED BY IT AND HAS THE FAX FROM WORD TO THE END ON WINDOWS VISTA, BOTH PORTS HAVE THE SAME INFORMATION, EXCEPT A EU FAX OF WORD AT THE END ANY HELP ON WHAT SE PAST.

  I JUST INSTALL WINDOW 7, MY OFFICEJET J4680 ALL IN ONE PRINTER. NOW IT WON'T PRINT. THE DAY BEFORE, IT WORKED.

  Hey 123 problems,.

  You will need to go to the HP website to download the latest software/drivers for your printer on Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3692888&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• I have a hp photosmart C6380 all-in-one and it will not print

  PRINTER

  I have a hp photosmart C6380 all-in-one and it will not be printed. Saids it is disabled in case of problems and it is not off! Tried to turn it off, then comes back on but still saids its judgment. What should do?

  Hello

  Make sure that your print spooler service is started.

  At this point, on your computer, check the status of the print spooler service. Restart the print spooler services.

  a. Click Start, type services.msc and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.