error lines (single const voilation) does not not at the table of shadow errors

Similar Questions

• Database will return no error, but does not delete the table

  Hello

  I'm developing an application that uses a database (SQLite). I would like to delete and re-create a table in the database (this table is the kind of a cache).

  When I run the following code, I get no error but chrome / ripple-> resources-> "Web SQL", I still see the old structure of the table.

  Do you have any idea what the problem might be or how I can solve it?

         db.transaction(
              function (tx) {
                  tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  for (var i = 0; i < oPerson.length; i++) {
                      tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                      iUsers = iUsers + 1;
                  }
              }
  
          );
  

  Thank you very much

  Roberto.

  Hello Roberto,

  There was a problem with your INSERT INTO string where you have provided additional value which did not exist as a database column. Change

   oPerson[i].Phonenumber + '", "' + '", "' + oPerson[i].Emailadd
  

  TO

   oPerson[i].Phonenumber + '", "' +  oPerson[i].Emailadd
  

  Here's a complete code that must run:

  var db = openDatabase('mydb', '2.0', 'Test DB', 4 * 1024 * 1024);
  var iUsers = 0;
  var oPerson = [{Firstname: 'Joe',
      Lastname: 'Smith',
      Phonenumber: '1800CALLJOE',
      emailadd: '[email protected]',
      Company: 'Photojam'},
      {Firstname: 'Jack',
      Lastname: 'Smith',
      Phonenumber: '1800JACK999',
      emailadd: '[email protected]',
      Company: 'Photojam'}
      ];
  db.transaction(
              function (tx) {
                  tx.executeSql('DROP TABLE IF EXISTS users',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  tx.executeSql('CREATE TABLE users (firstname, lastname, phonenumber, emailadd, company)',[],function (tx, res) {}, function (tx, err) {alert(err.message)});
                  for (var i = 0; i < oPerson.length; i++) {
                      tx.executeSql('INSERT INTO users (firstname, lastname, phonenumber, emailadd, company) VALUES ("' + oPerson[i].Firstname + '", "' + oPerson[i].Lastname + '", "' + oPerson[i].Phonenumber + '", "' + oPerson[i].Emailadd + '", "' + oPerson[i].Company + '")');
                      iUsers = iUsers + 1;
                  }
              }
  
          );
  

  Let me know if there are problems!

  See you soon,.

  James

• DAC does not synchronize the tables of Informatica

  Hello

  I'm new to OBIEE although I experience Informatica. I created a mapping and the workflow. DAC, I created the new folder logical and physical. Creates a new task and provided the name of the task and logical record and other details. When I try to "Synchronize the tasks", I get a message of success with the names of the tables as expected. The DAC journal file is below.

  -The Sync task has begun-

  Requested workflow is exported to C:\DAC\dac\repository\taskSync\.

  New source/target tables are inserted in the DAC metadata.

  Exported xml files are removed from C:\DAC\dac\repository\taskSync.

  -Sync task completed.

  It is not question of DAC with Informatica repository communication or integration service as connection test results are ok.

  In Windows command prompt, pmcmd and pmrep works fine.

  Can you please help me out here, as I'm stuck here and not able to go further.

  I checked the DAC server log. It shows a serious error. I copy the same thing here.

  12 INFO Fri May 02 09:46:09 EDT 2014 reading repository properties

  INFO 13 Fri May 02 09:46:09 EDT 2014 reading repository properties

  14 INFO Fri May 02 09:46:10 EDT 2014 reading execution types

  15 INFO executors of sync Fri May 02 09:46:10 EDT 2014

  16 SEVERE Fri May 02 09:46:10 EDT 2014 audit the localhost with the values defined in the DAC repository!

  INFO 17 Fri May 02 09:46:10 EDT 2014 add server name: localhost

  INFO 18 Fri May 02 09:46:10 EDT 2014 adding replacing servername: unspecified

  19 SEVERE Fri May 02 09:46:12 EDT 2014 Unknown host Unspecified. Error message: unspecified

  Fri May 02 20 INFO 09:46:12 EDT 2014 bound to port 3141

  INFO 21 Fri May 02 09:46:12 EDT 2014 creation ClientMessage dispatcher with 2 worker threads

  INFO 22 Fri May 02 09:46:12 EDT 2014 no competition, only ETL can work both and it will run in the same process space.

  NEWS 23 Fri May 02 09:46:12 EDT 2014 SERVER_NETWORK_MESSAGE: Created ClientMessage dispatcher with 2 worker threads

  Fri may 02 24 INFO 09:46:12 EDT 2014 com.siebel.etl.net.ClientMessageDispatcher registered with HeartBeatManager

  Thanks for your help,

  Ananth

  You can ignore any additional flat file as the source for the task in CAD.

  Make sure what you do know about informatica

  Pls don't change the original message! If you want to add anything, you can go to meet.

  I think that you are ready to go to close

• Does not receive the table name in the list of schema objects creating EO

  Hello

  IAM does not have my name of the table custom in the list of schema objects during the creation of EO.

  I created a custom table and I need to use this table looks for creation EO,

  But while creating the EO, I'm not able to find the table in the schema object list.

  in the connection database, these tables are present, but only in this window (window of creation of Eo) these tables do not come

  can someone please help how to solve this problem.

  Hello

  I found the solution

  in business components that there is another database link that I've changed now, it works fine now

• JTable with custom column model and model table does not display the table header

  Hello
  
  I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:
  
  Thanks for your help.
  

  import javax.swing.*;
  import javax.swing.table.*;
  
  public class Test1 extends JFrame
  {
       public static void main(String args[])
       {
            JTable table;
            TableColumnModel colModel=createTestColumnModel();
            TestTableModel tableModel=new TestTableModel();
            Test1 frame=new Test1();
  
            table=new JTable(tableModel, colModel);
            frame.getContentPane().add(new JScrollPane(table));
  
            frame.setSize(200,200);
            frame.setVisible(true);
       }
  
       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
            columnModel.addColumn(new TableColumn(0));
  
            return columnModel;
       }
  
       static class TestTableModel extends AbstractTableModel
       {
            public int getColumnCount()
            {
                 return 1;
            }
  
            public Class<?> getColumnClass(int columnIndex)
            {
                 return String.class;
            }
  
            public String getColumnName(int column)
            {
                 return "col";
            }
  
            public int getRowCount()
            {
                 return 1;
            }
  
            public Object getValueAt(int row, int col)
            {
                 return "test";
            }
  
            public void setValueAt(Object aValue, int rowIndex, int columnIndex)
            {
            }
       }
  }

  Published by: 802416 on October 14, 2010 04:29
  added

  See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
  When the TableColumn is created, the default headerValue is null
  So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).

  It worked:

       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
                  TableColumn col = new TableColumn(0);
                  col.setHeaderValue("Header Title");
            columnModel.addColumn(col);
                  return columnModel;
       }
  

  Published by: jduprez on October 14, 2010 14:09
  Beaten by a fraction of a second!

  Published by: jduprez on October 14, 2010 14:10
  OK, by a split of 17 minutes, specifically: o)

• DBMS_STATS.gather_fixed_objects_stats does not update the tables all fixed.

  I use 11g on Redhat
  
  After race run dbms_stats.gather_fixed_objects_stats not change date last_analyzed in DBA_TAB_STATISTICS for table X$ KTURD

  In our database entry dba_tab_statistics to the fixed point of view shows only NULL values.
  Any query that object exist in our databases show 'now, the selected lines.

  See you soon
  FJFranken

• Error 1074395241: The model descriptor does not contain the data required for the corresponding rotation invariant.

  Hi all

  I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.

  My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:

  

  The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:

  

  But in this case, when I run it, it shows the error I mentioned in the subject line.

  If you need more information about my project to identify the problem, please let me know.

  Thanks in advance.

  S ' Please example from model that comes with labview First
  Go to labview Help > find examples and you can search for example.
  -You create model with angle range and what kind of special criteria you want to use.
  -To do this you must use IMAQ learn pattern before using IMAQ model Match 4
  Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• Director of Windows won't start; How to fix error: "component identity found in manifest does not match the identity of the requested component»

  Whenever I try to start Windows Movie Maker, I get the following error:

  "Sorry, cannot start Windows movie maker. Make sure your satisfied computer minimum system requirements before you try to start the Movie Maker and then try to update the driver for your video card if Movie Maker does not start".

  I know that my computer meets the minimum system requirements because it came with the whole package. I've also updated my video driver correctly several times. I even uninstalled Movie Maker, re-installed. Even uninstalled the complete set of Windows Live and re-installed, but it still does not work. After a lot of searching for answers, I found the event log in which this error:

  «Activation context generation failed for "C:\Program Files (x 86) \Windows Gallery\MovieMaker.Exe".» Manifest error or policy of the folder "C:\Program Files (x 86)" \Windows Live\Photo Gallery\WLMFDS. "." DLL"on line 8. Component identity found in manifest does not match the identity of the requested component. Reference is WLMFDS, processorArchitecture = "AMD64", type = "win32", version = "1.0.0.1". Definition is WLMFDS, processorArchitecture = "x 86", type = "win32", version = "1.0.0.1". Use sxstrace.exe for detailed diagnosis. »

  I don't know, but I think it's causing my movie maker does not start. I looked around even more of an answer to this question on how to resolve this error, and I couldn't find anything so far. Microsoft support said that I have nothing to do and it will solve automatically. Alas, I got this error whenever I tried to open Movie Maker (the time is equal to the time I tried to open it).

  What can I do to fix this?

  Thanks in advance.

  Hello JurrianH,

  You can go ahead and post in the forums alive in dealing with the problem with Live Movie Maker specifically. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry

• I get a JavaScript Application error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  I get a pop up box with the message: Application JavaScript error: "setTimeout" called on an object that does not implement the interface Window for Firefox.

  But it seems to appear when I go to Amazon.com. Then he opens with this message and the OK option? But as fast as I can click OK, another box appears. After all a half dozen, she disappears - until what I move to another part of Amazon! I uninstalled - reinstalled and then - Firefox and BA. I do not understand this!

  (And of course, there is always the possibility that it is not only attacking me on Amazon... There may be a lot of other sites that also trigger, and I just haven't been there yet.)

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!

  You probably should have updated to 10.5.8 first.

  Installation or update of Snow Leopard:

  http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF

• LabVIEW program works on a single computer, but does not work on another.

  We have a laptop running a custom data acquisition program that has been done with labview by an external company. It communicates via ethernet with a box full of material national instruments that is connected to some sensors. While it works fine on the laptop, try to install the software on other computers results in the following error message "year error occurred while trying to open the configuration file"C:\program files\ (program name) \data\ (name of our company) fieldpoint.iak. This error occurs whenever we try to open the settings page of test or run a test. I checked that directory and the file is actually there.

  New computers (we tried several) always have difficulty connecting to hardware via ethernet, and if you look at the network activity in windows, you can see a whole bunch of packages sent but only a little if any course of reception. I wonder if there is a network configuration problem? I tried with the settings as much as I can find, but nothing helped.

  The company that made the software does not meet the emails.

  Any ideas would be greatly appreciated!

  A thinking hand: the file you are trying to read is a FieldPoint config file. I don't know if the FieldPoint configuration file format changed with different versions of FieldPoint. You may not have the same version of FieldPoint installed?